6102 CA-42 Cannot Connect to PC Suite

I have what appears to be an offbrand CA-42 cable (from eBay). It has always worked fine for me in the past, but I recently did a fresh install of XP with SP2, and now I'm running into some problems. From the CD, I first install the cable drivers, then follow all instructions perfectly through the PC Suite installation. When it gets to the "Get Connected" part, I'm stuck on the screen where I connect my phone for the final part of the setup. My PC's definitely recognizing the 6102 from the USB port, but I'm just hanging on the "Connect Your Phone" screen and the phone never adds its profile to PC Suite. I've already searched the forums and haven't found a working solution yet. Any ideas???Message Edited by themilstead on 24-Oct-2006
01:46 AM

because this is vitual COM port assosiation by windows, you really cannot predict what COM port will be assigned to this device, it depends what other stuff you have in your PC system that requires COM port.
What I mean was that try to figure out from PC Suite - manage connections, that do you have, when selecting CA-42 a choise to select a COM port and if yes, select the one that is visible.
With Nokia CA-42 (the original) the COm port association normally happens automatically, because users (the wast majority I think) do not want to know anything about COm ports ;-)

Similar Messages

Cannot Connect to Nokia Suite

Hi,
As my Nokia was running bit slow, i did a hard reset by pressing *#7370#, the phone was not connected to PC. After the phone was restarted, I cannot connect to the Nokia Suite on my laptop. It seems it cannot even realise that a phone is connected through USB. Please help.
Thanks

@Worldwar
If you change USB connectivity mode on C5-00 user interface to "mass storage" mode does your PC recognise it in this mode?
Happy to have helped forum with a Support Ratio = 42.5

Nokia 6708 - cannot connect to PC Suite 6.85

I cannot connect my 6708 to PC Suite 6.85 although I followed all steps as per web site and customer "care". I get the readin " Nokia 6708 connected in a non compatible mode " How can I undo this and make it compatible. Apparently customer care cannot help. Anyone with a solution ? Much appreciated as I paid a damn lot of money for this phone and use it for my business. Thanks a lot

Does any prompt appear in your phone when you connect the usb cable? In some Nokia like my N91-2, I have 3 option(PCSuite,Mass Storage, & Music) & selecting mass storage give that message, which one have to ignore. Windows treat the phone memory as just another external harddisk like flash disk.
Did you download the PCSuite version specifically for your phone model?Message Edited by android on 12-Dec-200711:22 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

My Nokia phone cannot connect to Nokia Suite (E6-0...

Hello,
I have the following problem. 2 days ago I updated my Nokia Suite with a new version ... Everything went smooth, but, when I tried to connect my phone (both E6 and C5) the suite displayed an error message saying that the phone is not connected in PC Suite mode ... I checked the setting on both phones and both were in PC SUite mode.
I emailed the Nokia support and they suggested me to reset the phone to factory settings ... I did it, but the problem still persists ... Then I tried to reinstall the Suite ... But without any result ... I still cannot connect the devices to Nokia suite.
Any suggestions on how to solve this issue? Are there others that are experiencing the same issue?
Solved!
Go to Solution.
Attachments:
message.png ‏18 KB
print-screen-c5.png ‏59 KB
print-screen-e6.png ‏60 KB

Hi EugeniuSp,
- Which Windows version and which Windows Service Pack do you have installed?
After that, please try following:
- First, disconnect both phones from your PC.
- Then reboot your PC
- When PC has started again, start again Nokia Suite
- Try now connecting your phone in PC Suite mode to your PC via USB cable
- Does Nokia Suite now connect to your phone?
If that didn't help, try following:
- Disconnect your phone from PC
- Go into WIndows Control Panel
- Search there installed programs
- Uninstall Nokia Connectivity Cable Driver
- Restart your PC
- When PC has restarted, please run again Nokia Suite installation package (available from www.nokia.com/nokiasuite) and choose repair option
- After Nokia Suite installation has completed, try connecting your phone again to your PC.
- Does Nokia Suite now connect to your phone?
Cheers, Samuli

5800 XpressMusic cannot connect to PC suite becaus...

I decided to uninstall OVI_PC suite (ori.version that I get with my phone) to try the new one (version 2)
With the new PC suite, I can't use the phone as the modem because of MTP device.
So, I removed and tried NOKIA_PC suite (version 7.1). The MTP device message occur again.
Then I decided to call Nokia careline that suggest me to
1) uninstall 2 devices (Nokia USB Modem & I don't remember) in device manager.
2) Restart both phone & laptop.
3) Connect again in other USB port. >> Now I can connect the phone modem and surf the net.
**Specification
-Windows XP sp.2
-NOKIA_PC suite 7.1

what was the other driver?
was it
Nokia 5800 XpressMusic under Portable Devices.
or
Nokia 5800 XpressMusic USB (COM4) under Ports (COM & LPT
i am having similar problem see my post here: /t5/Nseries-and-S60-Smartphones/5800-as-modem-problem-when-quot-Opening-Port-quot/td-p/784877
thanks.

Cannot connect to ovi suite after deleted all prog...

Hello!
I have N97 mini and I deleted all programs on my phone. and now ovi suite is showing error that it is not recognizing phone.
What can I do?
files I can transfer, it works.

Same problem here. In Ireland, using an E5, able to sign in on my PC and send links to my handset but then 'Sign-in failed. Check your user name and password'. I can actually sign in to the Ovi Store on my handset but if I try to download anything it request I sign in again and then I get the error message above. I've had the phone a month and it has always been like this. Head wrecking.

Cannot connect my phone to PC suite

I have a Nokia 7373 and I am trying to connect it to the PC suite using bluetooth. The version of PC Suite I have is 6.83. I am also using Windows XP.
I have done everything the manual told me to do, and bluetooth is switched on.
If anyone can help me with connecting my phone it would be much appreciated!
Thanks.

| am also having the same problem connecting my nokia 7373 to the pc suite with bluetooth, I have had to buy a USB cable, despite having just bought the bluetooth.
I am using windows XP home edition, and IVT bluesoleil, version 1.6.1.4, release 050606, and have updated the pc suite to version 6.83.14.1, I have tried fixing the pc suite in add/remove programmes, and fixing the pc connectivity solution, I have also uninstalled it, and then saved it to my PC and installed rather than running fron the website, but nothing works!!
When I try and connect via bluetooth it gives me a code open media, and tells me to check all the drivers and software needed are available. It has on occasion allowed me to get past this and tick the box for the bluetooth, but then when it finds my phone it is greyed out, and cannot connect with it, even though I can do it with the actual bluetooth programme, unfortuanatly the bluetooth programme isnt as good as been able to use the pc suite, hence why I have bought a USB cable!
I never had a problem using the PC suite I had with my Nokia 6230i, so I can only think it is the updated version of PC suite that has a problem?

Cannot connect to Database after install Developer Suite

Help..
I installed Oracle Database and everything seems work properly. I can connect to the database. (system/oracle@orcl)
well, but after I install the developer suite, I can't connect to the database anymore.
I did check the services and both OracleOraDb10g_home1TNSListener and OracleServiceORCL are started.
I try to search help from google but I cannot solve the problem by myself. I also include two ora file below,
tnsnames.ora
=====
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====
listener.ora
===
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
====
everything seems should working properly but I still have problem cannot connect to the database. SQLPlus says "ORA-12154" and "ORA-12514"
please help me.. I need to finish my project within next 2 weeks or I have to study one more year. T_T

Hi ...
The Oracle Doc points out as actions in this type of error:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.According to the above and my LISTENER settings in listener.ora file which is...
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
)there is one ')' missing closing parenthesis....
So , modify your LISTENER settings ... according to the below....The difference is the ')' in bold....
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Can you connect now.....????
Regards,
Simon

Cannot connect N79 with new and old Nokia suites r...

I have an N79 which I can successfully connect with Nokia Suite 3.3.x running on Windows XP and sync my data.
However, I have failed to connect the same phone (and also a N86) with the Nokia suite running on Windows 7. The connection with Windows seems fine (and I can browse the contents of the phone from Explorer). However Nokia Suite 3.3.x does not detect the device, although looking at the Add Phone window it is clearly trying to do something when I physically connect the phone - sometimes a message "Wait while we configure the phone etc."
I have tried removing all Nokia software, removing registry entries, reloading. But to no effect. I have tried repairing the various Mokia software elements through Control Panel.
I tried an older version of the suite (OVI 3.0.0.286). Again without success, except that it does see the phone because it lists it on the Add Phone screen. However, when I select it I get a pop-up advising me that the phone is not in PC Suite mode - but it is!!! This does not happen every time but only after I delete the phone's entry from Devices. If I do not do that, the suite does not list the phone. The same happens on Vista.
The USB cable is from Nokia (CA 101). So same phone, same cable, same Nokia suite - works on XP but not on Win 7 or Vista.
Any ideas would be most welcome.

Hi, tinwhistle. Thanks for sharing with us your concern. Do you have the latest version of the Nokia Suite? Can you also make sure that you have an admin access on your Windows 7 computer, and your firewalls & antivirus programs are disabled. It would also help if your Windows 7 drivers are up-to-date. Keep us posted.

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

Officejet 6500 e710n-z cannot connect to new iMac Mavericks 10.9.5

I"ve had the Officejet al in one for a year or more now and it has worked fine connecting well to my old Macbookair (10.5.8) with few problems printing wirelessly. Since getting a brand new Imac with spanking new software I cannot connect. There seems to be no printer drivers in the imac so I downloaded the full HP suite. Still using
system prefs>
printers and scanners>
add printer
nothing appears. Not recognised. At all. Updated OS. REbooted printer. Reconnected to network router (BT Home hub5) form scratch. Only recognised when I attached it to USB, but as soon as I unplugged it was 'offline' despite both imac and OJ being connected to same network router. Can you help...? Your helppages simply direct me to go through the steps referred to above ie how to 'add' a new printer in the OS system prefs (which I can't as it simply does not show up unless connected by wire, which defeats the object...).
Thanks
Trevor P

Hi @trevorpick , and welcome to the HP Forums!
I see you're running into printing issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer via OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Once it is readded to your system, I would recommend this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cannot connect to the Service Manager portal WCF service - Error when opening SM Portal

Greetings,
I have tried everything I can think of to resolve this issue and I have tried all suggestions I have found on Technet.
Basically, I had the SM Portal working on a test VM. I am ready to use it in production but it is not working. I deleted my test VM and built a new one. On it, I have SharePoint 2010 Foundation and the SM Portal installed. I have
a valid self-signed cert. the FQDN is correct (hqsrva24.dds.local) in both SharePoint and also in IIS. I also made sure under Application Settings on the SM Portal IIS site points to the FQDN of the SCSMWebContentServer.
So what happens when I go to the SM Portal (https://hqsrva24.dds.local:444/SMPortal) is it prompts me for a logon, which i put in and the site comes up. But at that point the Silverlight portion is not loaded and I immediately get prompted for a logon.
I have tried several different logons, all of which have full access to the site in Sharepoint. Eventually I get the error in red at the bottom of the screen "Cannot connect to the Service Manager portal WCF service"
If I try to access the Web Content Server service on its own (https://hqsrva24.dds.local/Servicehost/services/DataAccessService.svc), I get a prompt to logon and none of my logons work. i eventually get
an unauthorized error. However; If I log into the server which SM Portal is on and go to https://localhost/Servicehost/services/DataAccessService.svc, I get no prompt to login and I get a "Metapublishing for this service is currently disabled."
I'm out of ideas at this point, barring completely starting over (not just the SM portal but all of the Service Manager Suite).

Man I've had this problem so many times and its almost always a different solution. Are you sure that either the Domain Users group or NT Authority\Authenticated Users have permissions to the site and service. remember the the two prompts are authenticating
different things: the Sharepoint site and the application site (silverlight). Make sure users have permission in both SCSM and in Sharepoint.
- Slow is smooth and smooth is fast.

Cannot connect to internet via Vivaz in Cambodia with CellCard(Mobitel)

I cannot connect my Vivaz phone as modem with my laptop to the internet via a telecom company is called Mobitel (Cell Card). Any one can help?

http://talk.sonyericsson.com/message/7095#7095 Link to related thread about using the Vivaz as a modem.PC suite has been replaced by PC companion now.

Error - Cannot connect to the phone

Hi all,
have had a dig around and couldn't find anything so I hoping that someone can sort me out here.
Ok I have my phone connected to the pc via bluetooth. PC Suite picks up the phone but when I click on the Contacts or Messages (or anything in that window) it comes up with an error message saying "Cannot connect to the phone"
I have checked the list of supported bluetooth stacks and it should be fine. I have also check the phones compatability and this should also be supported. I can also communicate with the phone through the bluetooth software itself.
Phone: Nokia 6233
Bluetooth: ITV Bluesoleil 5.0.5
OS: Windows Vista
Error: Cannot connect to the phone
If you need anymore info or can help me with this problem in anyway, please drop us a line.
Cheers for all your help
Chris
EDIT:
Operating system:
Microsoft Windows Vista 32-bit Edition
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 2.0
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386)
PC Connectivity Solution:
Version 7.37.22.0
Message Edited by chriscolden on 05-Jan-2008 02:08 AM

Exactly same problem.
OS: Windows XP Service Pack 2
Phone: Nokia 6300
PC Suite version: 6.85.14.1
BlueSoleil Version: 1.6.1.4 (which should be the version supported by latest PC Suite software version as per Nokia web site).
Bluetooth USB Adapter: Billionton USBBTC1A-B
I can pair the phone with my PC and transfer files using the BlueSoleil software directly, but every time I try to use anything in the Nokia PC Suite (after pairing and authorizing the phone in PC Suite), I get the "Could not connect to the phone" error.
When using "Help --> About Nokia PC Suite... --> Show System Info" function:
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
- Mozilla Firefox 2.0
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
PC Connectivity Solution:
Version 7.37.22.0
Why the only Bluetooth stack detected is the Microsoft one? Why is BlueSoleil stack not detected?
How do I use Microsoft Bluetooth stack (at least to see if my Bluetooth USB Adapter works with it)??
Is this problem going to be solved soon? Is there something I can do without the PC Suite apart from transfering files? I can't edit contacts (save changes) with PC Suite even when the .vcf files are in my PC. Is this intended?
Thanks.
~JAVA

BAM Server stopped working - Cannot connect to the Oracle BAM services

Hi,
On logging into the OracleBAM page, I get Error 500 - Internal Server Error.
Caused by: java.lang.reflect.InvocationTargetException
Caused by: oracle.bam.common.remoting.ServiceUnavailableException: BAM-00223: Service "interface oracle.bam.adc.common.core.IDataStore" is unavailable.
Caused by: oracle.bam.adc.api.exceptions.ServerUnavailableException: BAM-01261: Cannot connect to the Oracle BAM services.
In the server startup log I find the following error before the server state changed to RUNNING
BAM-01324: Unable to establish BAM administrator account.
java.lang.Exception: BAM administrator account OracleSystemUser does not have administrator privileges.
How do I fix this? Help Please!
Also, is there a way to bring my BAM installation back to its vanilla state? Maybe run the Repository Creation Utility once more? Are there any files on the server that has to be cleaned?
Thanks
Alosh

Hello SOA gurus,
We're getting the same error as well. Our's a Linux environment and we've configured 2 managed servers (soa_server and bam_server)
Log file for the bam_server throws up this error message periodically. Looks like the other server doesn't. Does this message pertain to only BAM server ? (I'm new to SOA suite).
Also, is this a show stopper ? I've seen the managed server going down at times and wasn't sure if it was due to this error. Don't know if this error can be ignored or need to fix.
Can someone help on how to fix this really soon please ?
Thanks
Muthu

6102 CA-42 Cannot Connect to PC Suite

Similar Messages

Maybe you are looking for