6103 pairing with HP Ipaq h2200

I am trying to pair the 6103 with this PDA (h2200). Both are able to initiate the contact but the phone refuses the connection for "security" reasons. I dont have any security codes set so I am unsure why this is. The PDA considers the devices paired and has the phone ID ready but the phone always refuses. The bluetooth version in the PDA is 1.4.1 and the phone is version 1.2 supposedly compatable. Nokia points at bluetooth for the support who points back at nokia AND hp, microsoft etc. Nobody seems to have the answer to the question, are they compatable? Any suggestions?

Thanks, I found the Bluetooth Security update for iPAQ h2200 at http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/21093.html
Now works fine.

Similar Messages

6280 with iPAQ h2200 - "pairing and connection rej...

When I attempt to pair my 6280 with my iPAQ h2200 I get an message "pairing and connection rejected for security reasons"
No problems pairing the 6280 with my PC or headsets, and no problems pairing my iPAQ with other devices or my Motorola A925 or A1000.
Is there a setting on the 6280 which will allow this pair?

Thanks, I found the Bluetooth Security update for iPAQ h2200 at http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/21093.html
Now works fine.

6111 Bluetooth pairing with IPAQ h1940 PDA

Trying to pair my new 6111 with my HP IPAQ h1940 pda. I have paired successfully with my Bluetooth headset and my PC, but each time I try and pair with the IPAQ I get connection failed. The 6111 finds the IPAQ, displays the icon and name and asks me to enter the passcode.I enter a code i.e. 0000 on the 6111 and the same code on the IPAQ. but pairing fails, with the error message "pairing and comm. rejected for security reasons". There must be some secret passcode that I am unaware of.
Any ideas anybody on how I can make this pairing happen?? HELP!!.
I have not set any codes anywhere along the line so all passcodes would be the default

10-Aug-2006
12:33 AM
iaine wrote:
Trying to pair my new 6111 with my HP IPAQ h1940 pda. I have paired successfully with my Bluetooth headset and my PC, but each time I try and pair with the IPAQ I get connection failed. The 6111 finds the IPAQ, displays the icon and name and asks me to enter the passcode.I enter a code i.e. 0000 on the 6111 and the same code on the IPAQ. but pairing fails, with the error message "pairing and comm. rejected for security reasons". There must be some secret passcode that I am unaware of.
Any ideas anybody on how I can make this pairing happen?? HELP!!.
I have not set any codes anywhere along the line so all passcodes would be the default
I'm having the same problem with my HP2200

Tutorial - Connecting an Nokia Phone with an iPaq ...

This Tutorial is as a result of a post by qvodude on 13th January 2008.
Tutorial – Connecting an Nokia Mobile Phone to an HP iPaq Pocket PC
This tutorial has been done using a Nokia 6260 (S60 series 2) and an iPaq 5965 travel companion (windows mobile 5).
Turn on the phone and then go to menu>connections>Bluetooth. When you open Bluetooth you are asked to give your phone a name. (I named mine Nokia 6260). Hit ok. Then highlight Bluetooth and select options>change and switch Bluetooth on. Then scroll down to My phones visibility >options > change > shown to all >ok. Your phone is now set up.
Switch on the iPaq. Start > settings > iPaq Wireless and turn Bluetooth on. Then tap done. On the settings page tap on Bluetooth Manager. When you open Bluetooth Manager it gives you a welcome screen. Just follow the instructions. Luckily my phone is in the list so it was fairly simple. If your phone is not in the list then select Generic Dialer or generic generic. The ipaq will then search for devices in range. In my case it picked up my phone and my laptop. I then selected my phone and was asked if I wanted to pair the devices. I said yes accepted the code that was on the screen and then pressed next. A message then appeared on my phone asking if I wanted to pair with my iPaq. I entered the same code that was used on the iPaq and pressed ok. The ipaq then asked if I wanted to connect to the internet and I said no as I did not want to connect at this time.
On my phone if I highlight Bluetooth and scroll right it shows Paired devices > Pocket PC 5965.
I then tested the setup by tapping tools > connect on the iPaq. My phone then asked if I wanted to Accept connection request from pocket PC. I then selected yes and my Pocket PC showed that I was connected to my network (Optus).
I trust that this helps you. If you have any further problems let me know. I will be going away next Thursday 22nd and will not be back until Wednesday 28th. Whilst I am away I will not be in a position to access these forums so if you could get back to me before then I would appreciate it.
Regards
Barry

Hey Bazyeo, sorry im writing soooooo late. I just wonted to thank you for the post on "Connecting an Nokia Phone with an IPAQ..."
Been really busy with job changes and all, as you know the States (US) is going thru a really bad job $hit, and I got dump... well I **bleep** one of the upper management guys off and was asked to resign. But oh well thats another post
Adios mate!
Message Edited by qvodude on 16-Jul-2009 05:08 PM

Using the 6500c with HP iPAQ

I need to use the modem from the 6500c to connect to the Internet with the iPAQ.
The correct parameters are entered on the telephone which work with a telephone from Ericsson.

The Bluetooth settings on the iPAQ are
General Profile default
Accessibility Name WM My Name
Address 00:121:31:CA:80
(Use PocketPC device name for Bluetooth
Accesibility Allow other devices to connect
- Paired devices only.
Services File Transfer; Info Exchange; Serial Port; Personal Network Sever.
Service Settings Enable Service On
Authorisation req. On
Authentication(passkey) req . On
Encryption required. On
Switching on Bluetooth the iPAQ I see that I have contact with the 6500c. I have set the parameters for a connection with SFR which uses the channel *99***1# (given by SFR and which works with the Ericsson but using *99***3#) I have then added the dial-up modem command AT+CGDCONT=1,"IP","websfr"
I have spoken both with SFR and Nokia (Service Centre,) and no one has an idea on how this problem can be resolved.
It appears that there is a lot of interest with the same problem on the 6500 slide.
Thanks for your help

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
Thank. Simon

Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
Thanks, Simon

IPhone 5S bluetooth pairing with prius in-car phone Issue

Let me begin by saying that this is my first problem with any apple device! EVER!!
I have an Verizon iPhone 5S, less than 2 months old, with the new OS 8.0.2 update and it will no longer pair correctly with my 2012 Prius V's in-car bluetooth phone. You try to call someone, it doesn't connect and you can't hang up!!!! Then auto-calls them when you turn the bluetooth on (in the phone)... but doesn't physically make the call on the phone. Now if the bluetooth in my phone is on, and I even start the car, the car states it's trying to call home. I have attempted many of the following in different combinations with no success:
Tried to end the call on the car's interface (it won't turn off), pressed the hang up button on the steering wheel -- nada.
Restarted Phone
Turned Car on/off/on
Removed all pairings and re-paired them together
Made sure the LTE option was on (the iPhone 6 option, which seems to be relatively successful, for data and voice/voice only/data only is not an option on iPhone 5S)
Now, my husband has a Droid 4 and it works seamlessly with the bluetooth pairing. The car does play, through the bluetooth, Audio through the phone.
I guess I should also state I did NOT have any issues with iOS 8.0 or the 8.0.1 upgrades with pairing with the car's bluetooth technology. I have checked and my Entune "upgrades" are all up to date.

Hello Sorridera,
The article linked below details a number of steps that can restore your iPhone's ability to correctly connect to your vehicle's Bluetooth system.
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/HT6473
Cheers,
Allen

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

IMac (Mountain Lion) does not pair with Apple Remote

Hi,
my iMac (2009, Mountain Lion) does pair with my remote. Otherwise the remote (or remotes, I tried two) are working fine with the iMac, it just wont pair.
I need it to pair as I have an iMac and MPB and each having its own remote (each computer should react only to its remote, not the other computer remote)
I googled this extensively, here is what I did so far:
- obviously, trying the normail "pair remote" procedure as the support page says
- checking that infrared remote pairing is enabled and no other remote is currenly paired
- restarting Mac OS
- removing and reinsterting battery in remote
- making sure I am an Admin
- disabling the remote function in Plex and killing all Plex (and EyeTV and similar) processes via Activity Monitor (thought they might somehow limite the OS control over the remote)
- tried the same with another remote (does not pair as well)
This is very annoying.
Can anyone help out?
Much appreciated

Hi den,
Does the remote remember which computer it is paired to? I though only the computer remebers that.
In any case, currently there is not remote paired to any computer (both computers have clean new Mountain Lion installations). And I cannot pair any remote to any of my machines. In between, I tried with the laptop as well, and it is not pairing as well. I also tried an (old, still working) third remote... nothing is happening.
Some apps seem to take control of the remote (e.g. pressing menu start Plex on my systems). Could that be the issue? Is there a Terminal command to give Mac OS back full control over the remote?
Or could it be something else? 'Is there an app for that' a la ForcePair.app?
Thank you
p.s. this is the page that I was refering to ealier, not working for me

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously. The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

Hello, my ipad has never been paired with any computer. My PC is ready to die and iTunes will not upload on it. My iPad is insisting that I connect to iTunes and I can't get out of that screen. How can I use my iPad without syncing it to iTunes? Than

Hello,
My iPad 2 has never been "paired" with any PC. My one and only PC is corrupted and will not, after many many attempts, download iTunes. When I turn on my iPad it insists that I connect to my iTunes. How can I avoid this and just get the iPad to work like normal? Any help is much appreciated

You cannot do anything with the iPad until you do as instructed by the iPad and connect to iTunes on a computer.
You probably need to restore the iPad and the only way to do that is via iTunes on a computer.
Take it to an Apple Store and ask for help at a Genius bar or take it to a friend's house that is running iTunes on their computer and try to restore it.
You will lose all of your data and settings now because you never backed the iPad up in the past.

My neighbour's Mac Book Pro shows up as discoverable when Bluetooth is turned on in my iPad Air. How can I block her device? How can I prevent her pairing with my iPad Air. I need Bluetooth on to play music over my system.

My neighbour's Mac Book Pro shows up as discoverable in my Bluetooth list on my iPad Air. How can I block her Bluetooth device? How can I prevent her pairing with my device? I need Bluetooth to stream music on my Bose system. Thanks!

If your device is discoverable, the other BT device would try (I am not sure if that would be successful). If it was, it would appear in your system preferences>Bluetooth.
Take a look at this re: security:
http://support.apple.com/kb/PH10786
This is from another Apple article:
Use Bluetooth
You can wirelessly transfer files between computers—even Mac to PC—using the Bluetooth File Exchange utility. You can even browse selected devices and retrieve files remotely. For extra security, you can stipulate that only trusted devices be allowed to connect to your Mac, and 128-bit over-the-air encryption is also available
Barry
P.S. Since I have not had the issue, I have not researched this before. Thank you for making me look into BT security
Message was edited by: Barry Hemphill

Magic Mouse won't stay paired with booth Boot Camp and Windows 7

So I have a Broadcom Bluetooth 2.1 dongle on Mac Pro 1,1, Lion, Boot Camp 3.3 and Windows 7 latest service pack and latest drivers/operating system. Everything is up-to-date.
My problem started with Windows 7 not wanting to pair with mini alluminum keybord AND magic mouse. I followed a post somewhere and I was able to get the keyboard to pair and work when I switch between Lion and Bootcamp Windows 7 by removing it from Bluetooth Prefs in Lion, adding it to Windows 7 BC, and then adding it again in Lion.
However, magic mouse will still work with onlly one: If I add it to Windows 7 and then restart to Lion, add it there and then restart in Windows, it shows as paired in Windows but it does not respond. I then remove it from Windows 7 and add it again, and it works. Then I reboot in Lion. It is on the list, but not connected. Even the option to connect is not available. I try restarting the mouse, no luck. The only way I can get it to work in Lion again, is to remove it and add it again. Now, I go back to Windows 7, It is there on the list, but it does not respond. In short, the Magic Mouse only seems to want to stay paired (or work) with either Win 7 or Lion. Getting it to work with one cancels the other.
BTW, every time I pair it with Lion, I set it as a Favorite.
Any suggestions?

Some more info I have gleaned from my 13" white Core 2 Duo Macbook (not sure what generation - came with Tiger though). If I uninstall the Intel graphics drivers, the Sleep option is gone from Windows 7 but it will hibernate, and when resuming from hibernation the screen comes back on. However, when the Intel drivers are reinstalled the "screen off" problem is present for both hybernate and sleep. Two other data points: the power manager can't turn off the screen (after X minutes, etc) and I can't get any picture on an external monitor either. Just wanted to share.

6103 pairing with HP Ipaq h2200

Similar Messages

Maybe you are looking for