6110 - replace memory card

Hi,
I have a 6119 Navigator and I've decided to replace is memory card for one with bigger capacity. However, when I did it, all the languages I had (except the English), were missing.
This is a problem for me (Portuguese) mainly because I need the Portuguese language for Nokia Navigator.
I've tried to make the backup (OVI Suite) but when I restore the data, nothing happens: the English language is the only language available.
I would appreciate any tips to solve this.
Tanks (and sorry about my English).
Silva
The reason was because I've other R66 maps needed to install some maps (downloaded from nokia maps) and

@JJESilva
Although you would need to enable "Show hidden & System files" on your PC first, have you tried:
1. Connect the phone to the PC via USB and select "Data Transfer Mode"
2. Run Route66 sync on the PC.
3. Select the map files, etc in the right hand pane within route66 and press backup.
4. When complete you should see the backup file in the left hand pane of route66.
5. Press the red 'call cancel' button and select 'remove memory card' on the phone and remove this memory card (Best keep it safe just in case). Insert your shinny new memory card.
6. Using the phone, format the memory card (just to be safe).
7. Start Route66 sync again and restore the backup to the mobile.
Windows 7 - Open (My) Computer Press the Alt key > Click Tools > Folder Options…Click the View tab, select Show hidden files and folders, and uncheck Hide protected operating system files.
http://www.microsoft.com/windowsxp/using/helpandsu​pport/learnmore/tips/hiddenfiles.mspx
http://windows.microsoft.com/en-US/windows-vista/S​how-hidden-files
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • MacPro Requires restart//Replace Memory cards?!

    Ok;  I've posted before..but since, I've done these things: Apple Repair ,,, Disk Utility Repair...tests...all these things. Everything looks ok.
      But, ok  My Mac PRO  ( on Snow Leopard..10.6.8   and  if I leave' the computr  IDYLL for 20 minutes or more, the power button slowly blinks..and whole
    computer is frozen. Nothing works, not even ESC. +Command + Option'   Nothing.     IF this problem IS the RAM,  is it PERFECTLY acceptable to just run to the
    store and buy new Memory cards/ 512 each?   I have four- installed now.   If it IS bad RAM,  can I just assume buying new chips and this 'frozen problem will
    go away?  ( The Mac store wants me to lug in my computer for diagnostic tests for $130.  should I just buy the New RAM? thx in advanc.. Larry NYC

    Have you turned off sleep? Most issues like this are caused by USB or firewire devices that do not support sleep.
    Your Mac Pro 65 lb. tower has Error Correcting Code (ECC) RAM. it keeps a count of memory errors. Double-bit errors will cause a kernel panic that leaves a "suicide note" with a reason.
    Do you have any evidence that memory is the problem? If no, why would you replace the memory?
    An Appointement at the Genius Bar in an Apple Store for an evaluation is FREE, in or out of warranty. What's this $130 baloney?

  • What are the largest sized memory cards that can be swapped into a macmini 2.6GHz i7 quadcore

    What are the largest sized replacement memory cards that can be used in a new macmini 2.6MHz i7 quad core? I see samsung has some 16GB cards and was wondering if the macmini can be jacked up to 32GB instead of the apple store configuration of 2x8GB or 16GB total.

    I called Apple Support cause I just purchased my Macmini and found out that it is a memory stick slot issue of some sort. If there were 4 slots instead of two, then you could have 32GB of memory. So it appears to be a board layout issue when apple layed out the processor board they did not allow for enough address bus width for the memory slots cause the intel processor chip will support up to 32GB of memory. Apparently others have tried to put 2x16GB into macminis and have all been unsuccessful thus far. I guess someone could go in and whitewire their processor board but that would be insanely over the top. :-)

  • E61 Memory card exchange 64 MB - 1GB

    I was trying to replace the provided 64MB card with a 1 GB, but lost all applications, since the have been installed on the 64MB. Reinstalling them from CD to the new card failed for whatever reasons, no detailed installation instructions are available for troubleshooting. Did someone face the same problems? Any ideas, how to solve this (replacing memory cards seems to be common practice and should not cause any problems)

    Did you try copying the content of the old card (everything, including the protected directories (sys, resource, system and private) content? Maybe giving the new card the same name as the old one could help as well?
    I faced a similar situation (loss of apps that were on the memory card) when switching to a new card, but don't remember having been unable to reinstall them...

  • I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I assume that you have installed new RAM in your MBP.
    It would be helpful if you indicated the EXACT model/year MBP that you have.
    What the the RAM specifications that you are trying to install?
    Ciao.

  • How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c Desktop PC

    I bought a refurbished HP Pavilion 500-027c Desktop PC computer from walmart 2 weeks ago... The 5-in-1 memory card reader does not work... the device manager says that it is working properly but when I put in a memory card nothing happens... The white light comes on indicating that the memory card has been inserted but the computer does not recognize that anything has been done... I would like to just replace the card reader itself... I see on hp support where it is possible to replace the memory card reader (front I/O), but I don't know where to purchase the actual card reader itself... I don't have any specs on the card reader either.... PLEASE HELP!!!!
    This question was solved.
    View Solution.

    Thanks that page really helped out alot.  And the card is a SDHC memory card.  Now I just need to look into ordering part # 713240-003. How would I go about doing that anyways?
    I bought it refurbished walmart and it had a 14 day warranty... Is there any type of manufacturer warranty?

  • 6110 transferring map to new memory card

    Hi. I've just got a 6110 Navigator with UK map preloaded onto a memory card. I want to put in a bigger card but can't seem to be able to copy the map from the old one onto the new one. I've followed the help file instructions but it say Map Manager shouldhave a "Settings"button that I can't find to select the "copy card" option. Can anyone help?

    the phone supports cards of 8 gb and higher. i currently got 8gb installed (make sure you have at least firmware 3.58 installed, 4.22 is better!)
    nokia also says the phone supports 8gb, so ignore the post of babdi.
    @bin_man: have you got at least firmware 3.58 installed? if so, reformat the microsdhc card, and then try to copy the data again. if you get the i/o error already while formating or later, the memory card is damaged (usually this kind of error occurs with damaged microsdhc cards). however you should still try to copy the data by simply using a different card-reader (do you currently transfer the data over usbcable through the nokia 6110 navigator onto the card?). and dont work on your computer during that time and best would be to disable the virus-scanner too.
    @rickofpigs: first of all, also check firmware (3.58 or higher). second: format the microsdhc card, after that, start nokia navigator program once (with the microsdhc card in it, and no other data on the card), the phone will copy a few files onto the memory card that are necessary for the sync. after that you can try the sync, it should work fine.
    Message Edited by laxlex on 03-Mar-2008 04:15 PM

  • 6110 Memory card upgrade

    I would like to use a 2GB microSD card in my 6110 Navigator as opposed to the 512MB version it came with. The problem is that the South African map on the standard card, can't be copied onto another card. It would cost 50 euros to buy it from the Route 66 store, but this seems crazy when it's already preinstalled on the phone's memory card.
    PC Suite only backs up images, contacts, etc. but not the map, so I can't transfer it this way.
    How can I get around this?

    Assuming that you have the 6110 Navigator package, you should have received the navigation software on CD with the phone - you can reinstall onto the new card with that.
    PC Suite will not help in this case.

  • How can I get Verizon to return my memory card- There screw up

    After screaming about 1x a week with this new pre-paid SAMSUNG phone, I finally was able to get the store to take the phone and replace it.  Sadly, I was so frustrated with Verizon for my phone never working, and  getting the run around, that I was glad to get the "we will get you a new one".
    Wasn't happy that they can't just give me a new one off the wall. (that would be 50 bucks please. (phone was 30 days old).
    SO, The guy behind the counter advised me, I would get a new one.  Took battery, I asked if  things were backed up, and he said "yes", the backup synch was set up. "like OK".
    So, removed battery and the lid, and the case I bought for it, took my old phone and said wait for new one. (came in today).
    I didn't even think of getting my 8GB memory card from the old phone at the time I left the store.
    This was 3 days ago (26th of Dec). Today, my new phone came in, it was not synching, not doing the backup right, and then I realized my memory card was not there.
    Nicely called the help desk thinking I was calling the store where i returned the phone.  NOPE, got tech support in a different state after 14 minutes of listening to switch witch and running around with button pushing. Just to be told "contact the store diectly".
    Headed to store, advised of what happened, and the cheerful guy with hte IPAD, typing your name, pretty much said " to bad".  It's goneft
    No help. Just me trying to stay calm, after the head-aches with this phone.  And now I am out an 8GB memory card, that Verizon, in their haste, never took time to remove (but did the battery), and I forgot to remove it myself.
    Now, I want Verizon to replace the memory card.  Their phone was bad, every week complained about this phone, and in 30 days, I now had to get it replaced.
    I take error in not remembering to get it. BUT, figured the techs behind the scenes would have thought of this.
    Anyone know of whom I can contact to ask VZN for a new card?  I lost some vital pics and info from my realtor, and have to bite that, but this wouldn't have  happened, if I could have gotten some satisfactory service, and I still ended up 3 days without a phone.

    I admit, I did screw up for not checking. I was just soo steamed with the customer support and going back and forth with phone and offices in Charleston, SC and here in VA, I was just getting frustrated with this phone that i had for 1 week, and couple with the craziness of the hustle trafflc of customers during the holidays.
    Just a lot of crazy here, but my new phone is in, I had to get the service center to  reset things, as the backup synch wasn't right, and I will get a new card.
    I just wanted a new phone that worked, and oversaw the issues.  This isn't the first time I had to return a phone, but last time, it was a slower pace, and no issues, and I  reminded myself to get the card out.
    Got 99% of my contacts. Just wishing there was somehow to track the phone, and have hope, but it was nothing that was life critical.. And cost of new cars is cheap.
    Chalk up to "pay attention"....  but oh, the frustration of 6 visits to the stores in 32 days I had that phone.  Ahh!
    Happy New Year, and thanks for the replies.... 

  • Memory issues - kernel panics / system freezes with 1Gb Memory Card

    I've recently updated my PowerBook OS to 10.4.7 and now more recently 10.4.8.
    Prior to this, i had been running a pair of pc2700 memory cards (1x1Gb + 1x 512Mb) bought from crucial technology on 10.3.9 with no problems.
    During the upgrade, i experienced complete system lock ups and kernel panics. pulling the 1Gb card resolved the problem.
    So i thought it could be duff memory (it happens). I ran hardware checker, both long and short tests, ran memchecker from single user and there was no reported errors although i was still getting crashes.
    I returned the memory to crucial and they replaced it and then i went to reinstall memory in the pb.
    Once reinstalled, problems re-emerged. Both System profiler and iStat pro show both memory sticks as ok. both are pc2700 DDR.
    i tried just the 1 Gb stick in alternate memory slots. with the memory in the lower slot i was getting system freezes, in the top slot i was getting kernel panics.
    I've pulled the 1Gb and reverted to 768Mb (512Mb lower (crucial)/ 256MB (apple) upper) and i'm back to normal.
    Now what?
    As my mac is getting on, i'd like to get as much RAM in it as i can, ideally the 1.5Gb /2Gb which it can support. I'd be suprised if it could be the memory stick being duff (2 duff in a row?), its not a faulty memory slot as system profiler is showing that its full.
    Any suggestions? Anything to do with how 10.4.8 handles the memory addressing?
    Any help would be appreciated.
    PowerBook G4 1Ghz FW800   Mac OS X (10.4.8)  

    I've had that problem, too. I found out that it was one of my memory modules that were broken.
    I'd say pop back in your other memory module, then get out your PowerBook DVD and stick it in Restart your PowerBook while holding down the Option Key on your keyboard until some buttons start to show up on your screen.
    Select the Hardware Test one, then click the Arrow button. It'll boot into a utility and you can run a hardware test that includes checking your memory.
    If any of your memory is bad, it'll show up like "**ERROR ERROR**" and give you a code.
    After you've identified the hardware problem (hopefully just the RAM), then you can go to Crucial's website and fill out an RMA request to have the memory replaced. I'm pretty sure Crucial has a life-time warranty on their memory products.

  • Camcorder video error: "Unable to record. Resolution not supported by memory card."

    We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
    Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem?  I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

    Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

  • How to upload photos from memory card to computer on new Officejet 8500A Plus?

    I recently replaced an older HP psc 2410 photosmart printer with a new Officejet Pro 8500A Plus printer.  The installation went fine without error messages, and it prints, scans and copies just fine.  When I insert a memory card into the slot, the printer itself recognizes the files and displays them on the LCD screen and offers to print them.  BUT ... what I want to do is upload the files to my PC (running Windows XP), and I can't figure out how to do it!  There is no HP program that pops up and offers to transfer the photos like with my old printer.   I was also expecting to see the card slots shown as a removeable drive like I did with my old printer, but I don't see them.  Also, my Photoshop Elements program doesn't recognize the card slots either.
    Then it dawned on me that my computer doesn't "see" the card slots because it's not connected directly to the printer!  I set this up as a wireless printer and I am totally new to this, so pardon if this is a dumb question... but is there no way to transfer files from the card slot to the PC in a wireless setup??  I'm totally confused...
    This question was solved.
    View Solution.

    Hi,
    If your printer is connected thru network or wireless network, you have to access it thru the IP address.
    Find out the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.
    Open Windows explorer and type \\xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the ip address of the printer.
    You'll see the memory card slot there.
    You can do a "map network drive" to it if you want your printer card slot to be listed there permanently.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

    How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere? 
    My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card.  I can delete thread but can't forward it or move it.  Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
    If not, any suggestions on backup apps?  I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...).  Anyone have any experience with those, or other suggestions?
    Thanks!
    Rich

    <Duplicate topic.  This thread will be locked.  Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

  • Iphoto doesn't read my memory card

    Hi! I just switched to a mac so i don't really know my ways yet.
    anyway, i was importing pictures to iphoto from a memory card using a USB memory card reader, then all of the sudden when i closed Iphoto and opened it again, my memory card can no longer be read.I tried my other CF and Memory sticks but with no luck.
    I did eject the memory card properly. there was this one time though that i forgot to eject it and removed the memory card.
    what do i do now? help!

    Welcome to the Apple Discussions. First lets get those photo off the card by dragging them to a folder on the desktop and import from there. Next delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, reformat the card with the camera, take a couple of test shots and try again. See if that helps.
    If the time you forgot to eject the card correctly was that last time you used the card then reformatting it with the camera should fix it.
    For what its' worth I recommend uploading from a card reader to a folder on the desktop first. This assures that the files get safely on the hard drive before any other action is started. Then reformat the card for the next shoot using the camera. If you name that folder to describe what the photos are about the Event will also have that name. I also sequentially batch rename the files with the date of the shoot and a brief description.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Plugged in memory card, exsiting folders and file names were renamed and unreadable

    First time using this forum, so excuse and formatting mistakes. I will try to provide as much information as possible.
    Today I plugged in my 16gb Kingston memory card after a shoot. The memory card had existing folders and files in it. When I looked at it in Bridge, though, the folders had been renamed as such: DCIM had changed to DBIL, _EDIT had changed to _^EDIT, _MG_7674.CR2 had changed to _LG^7674.CR2 and so forth. Lots of replaced letters and added symbols. Also, nothing can be opened now. I tried copying on of the images to my desktop, renaming to it's original name, but that did not work. I also plugged it back into the camera, and what was readable moments ago is now resulting in a "No Image" screen.
    Help!
    I am using Adobe Bridge CS6, a macbook pro with OS X version 10.6.8, and a canon 7D

    Have you applied all updates to CS6?  You should be at Photoshop CS6 13.0.6.

Maybe you are looking for