6120 always lose network

another phone works well, but this nokia 6120 always lose network.
Quality receiving changes from very well to very bad and again...
What's wrong? I don't want to go service center

http://europe.nokia.com/A4176089
If all else fail you might have a defective cellular radio module in the phone and it will need to be replaced - yep, you guessed it - service center for you ;-)
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Similar Messages

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Computer loses network connectivity with HP Photosmart Premium All In One C309a software installed

I am having an issue where my computer (Window XP Media Edition SP3) will loose all network connectivity after some variable amount of time when my HP Photosmart Premium All In One C309a drivers and software are installed. I cannot access the internet or other computers on my network from the affected computer until it is rebooted. When I uninstall the drivers and software, I do not encounter the loss of network connectivty. When I reinstall, the problem starts again. Within 24 hours, I will lose network connectivity requiring a restart. I have the software and drivers installed on another computer running Windows XP Professional SP3 without problems. Both computers are connected via ethernet cable to the network. The printer is connect to the network wirelessly. The printer works fine initiall from the affected computer but then after some variable amount of time computer seems to lose network connectivity. The driver installed is HP Photosmart C309a series (61.81.634.0). Thanks in advanced.

There are a few things to check.
First, is your security software getting in the way, here? Disable it to test.
Second, have you downloaded this firmware patch for your printer?
Third, did you install this software?
We'll go from there...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

My windows always lose focus

recently my macbook cannot work well 'cause the windows always lose its focus. i canno find out what's wrong with my computer. i tried restart, clean the PRAM and even reinstall the os. but all did not work out.
please help me . this problem is so annoying that i cannot type fluently and even cannot operate with a dropdown menu.

That could be the solution... but no luck..
Now, I´m running with stack: v6.01.03(D)
...and the problem is still there.
*More background:*
I am using a SonyEricsson sync program, every morning I connect my mobile via this program. The program is set to autosync the first thing when it detecs the mobile via bluetooth. The laptop stays often in the it´s dock and when I leave it (with the mobile in my pocket) and come back, they find eachother again and the sync starts. This way I never need to start the sync by myself which I always forget otherwhise.
The problem is that my computer sometimes checks if my mobile is still there (I suspect), and each time it starts to use the internal bluetooth device, the focus of current window I´m using is lost, this is of course very annoing when I´m writing something etc. This occurs regardless of the result of the search, ie regardless of it finds the phone or not.
Is there any workaround without losing that my phone autoconnects with my computer and the sync starts?

Why does it always lose count?

Hi, all-
I installed PCI7344 to control steppers. I configed it into open-loop stepper control. In the "Find Reference Setting", I selected the "Smart Enable" and "Reset Position"; Set "Offset move", "Primary Position" and "Secondary Position" to zero.
Then I run the labview example program "One-Axis Find Reference with Status Monitor.vi" to find home. Of course once the home position is found, the "Position" in "Current Trajectory Data" is reset to zero. Afterwards I moved the stepper through "1-D Interactive".
Here comes the weird problem. The first time I move the stepper after the Home Position is found, it always lose counts. For example, I put in 10000 in Target Position with the "Relative Position" mode, after the movement is co
mplete, the "Position" in "Current Trajectory Data" shows "9995" (always some counts less than or 10000) instead of 10000. The weird thing is this only happens in the first move, in the moves after that, the positon display will match the step I input.
Any idea why this happen? I tried to disable the Position Reset in the "Find Reference Setting" and use Absolute Position Mode, it seems in either case the problem is gone.....

I haven't heard about this issue, yet. Which NI-Motion version are you using? The latest version available for download is 6.1.3. You need to install 6.1.2 first and then the maintenance update 6.1.3.
Download links:
NI-Motion 6.1.2
NI-Motion 6.1.3 maintenance update
Please update to the latest version of NI-Motion and also update the firmware on the board in MAX. Please post a new comment to this answer if the problem persists.
Best regards,
Jochen Klier
National Instruments Germany

If I am using my Apple TV without hdmi cords do I always lose hdcp playback? If not, which adapters or cords must I purchase so my Apple TV still works optimally?

If I am using my Apple TV without hdmi cords do I always lose hdcp playback? If not, which adapters or cords must I purchase so my Apple TV still works opitmallly?

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

Lose network every time i try call???? help.

Lose network every time i try call???? help.

dear App support,
this problem happen with thaousand of pepole and give nigative rate for Iphone and open the market for Sa

HT5192 I have iPhone 4Gs Although I am in a good coverage area I lose network connection and re-establish connection again

I have iPhone 4Gs
Although I am in a good coverage area
I lose network connection and re-establish connection again

Please post in the iPhone forume. This is the iPod touch forum.

I have iPhone 4Gs Although I am in a good coverage area I lose network connection and re-establish connection again

I have iPhone 4Gs
Although I am in a good coverage area I lose network connection and re-establish connection again

Please post in the iPhone forume. This is the iPod touch forum.

Why i always get "Network is trying to modify the system network configuration type your password to allow this

why do i always get "Network is trying to modify the system network configuration type your password to allow this"

Hello, let's see if this old cure still works...
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.

My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

Wi-Fi?
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

When the iPad is charging, the keyboard is always lose control.

when the iPad is charging, the keyboard is always lose control.
For example. When I press one word, the other one or two words also appear in the blank.
When I hold the delate bottom, it doesn't work and many words appear on the board.

Have you installed all of the latest software updates for your MacBook Pro?

Help please - I can't update my ipad software as always get network connections issues - have turned off security!!

help please - I can't update my ipad software as always get network connections issues - have turned off security!!

I would try updating through a computer. Just make sure that your computer has the latest itunes

How do I lose 'network lost' on my iphone

how do I lose 'network lost' on my iphone

No, you cannot. You cannot access the file system in the iPhone or iPad, so there is no way for you to browse other drives.

6120 always lose network

Similar Messages

Maybe you are looking for