6120 Camera Results (very bad)

hey... i've just bought 6120 Classic...
it takes pictures good in daylight but very bad in low light (even light behind the camera)... i see alot of green lines (noise) on screen n in the picture
it says on the lable underneath battery 'Nokia 6120 C1'... wht does that mean? should i claim the warranty? n further y 6120 has no update yet where as my brother has 5300 n he has updated it once...
please help me wid this problem... i'm very disappointed wid this kind of camera result... thanks!

Yes it's very bad in low light, it tries to make it brighter by pixelating the whole image by green and red pixels.
I think you mean Nokia 6120C-1?
It's the type of 6120c i think.
Like the N95, It has three types, N95-1 (Normal version), N95-2 (Black 8GB version) and N95-3 (the Amercian version).
Nokia N95
V 20.0.015
0546553

Similar Messages

  • Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

    Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
    == URL of affected sites ==
    http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

    There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
    Brianeng

  • My ipad4 camera resolution was very bad.

    hi,
    my ipad4 camera resolution was very bad. not expected this poor quality!!!. i dont know whether its a problem or like that only..
    do you haveany idea?
    picture clarity not good as compare to iphone 4S. but i read in website it has greate camera.

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • IPhoto v9.3.2 = v9.4.2  I feel it unfair and unjustifiable to charge for an upgrade of a pre-installed iphoto programme. Please refer to the above version.  This will result in payment on your very bad App Store of £10   Extremely unhappy loyal Mac user!

    iPhoto v9.3.2 => v9.4.2
    I feel it unfair and unjustifiable to charge for an upgrade of a pre-installed iphoto programme. Please refer to the above version.
    This will result in payment on your very bad App Store of £10+
    Extremely unhappy loyal Mac user!!!!!!

    iPhoto v9.3.2 => v9.4.2
    Thank you for your response but in App Store it shows a price of £10+ for this down load.
    (This is a free update. Contact with Mac App Store support > http://www.apple.com/support/mac/app-store/contact)
    Perhaps you are correct but this is not made clear in the update window of this App Store.

  • Is it possible to set the performance in Camera Raw, like in PS? I have problems with the performance of the adjustment brush. It is a very bad workflow.

    I have problems with the performance of the adjustment brush. It is a very bad workflow.

    Had you specified you're on Windows, I wouldn't even have replied. I don't do windows.
    Yes, it has been a waste of time for both you and me.
    You don't even know how to ask a question properly and you want me to read the FAQs?  Hah! 
    No one will take your word for "ACR latest version", and "PS CC latest VersionVersion [sic]", as many users believe they are fully updated when they are not. Exact version numbers are needed.
    8 GB is considered the realistic minimum to run Photoshop CC, but it's far from optimal—on any platform.  There are other factors that can be at play and which you don't specify, such as the space available on each of your hard drives, whether you have a physically separate, dedicated hard drive for Photoshop's scratch drive, what video card you have and how much VRAM does it have, what your graphics settings are in Photoshop's Preferences > Performance, etc.
    That's why I had indicated a link for you to read:
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    If you read that link in its entirety and provide the pertinent information, maybe some of the Windows experts will be able to help you out.
    Now I'm out of here.

  • Hdmi adapter for Ipad has very bad resolution

    Hallo
    When i plug in my new Ipad digital-av adapter into my TV or projector the resolution is very bad and not shape.
    Do you also have this problem?

    You've identified that Acrobat's export of the image to PNG was spot on ("... on my Mac it is sharp.").
    Some possible sources of the web based image being of "bad resolution" present themselves.
    --| Some web based image hosting services provide uploaders that actually downsample an image.
    This is to reduce the image file's size and results in destructive remove of pixels. File size is smaller and resoultion can/does take a hit.
    --| There may be an issue related to the brower used. You could always install and try out other browsers to check this.
    --| You local machine may have a failing graphics card.
    There may be other issues. A web search might turn up some leads.
    Regardless, neither Acrobat nor Adobe Reader are web browsers and neither are "image viewers" for image file formats such as PNG.
    Be well...

  • Very bad resolution in menus (templates)

    I have a number of films taken with a camcorder Canon Vixia HF10. The camera settings are set to NTSC with frame rate 60, AVCHD.
    In my iMac (OS X vers.10.7.3), I tried first to edit my movies in iMovie, but soon I discovered that iMovie did not properly manage the  AVCHD format.
    With Adobe's Premiere Elements , I could however handle the AVCHD format in an excellent manner. But when I got to the final stage to create a menu
    of my film footage (where I used Premiere's menu templates) the menus were very bad with poor resolutions. I could see this both at "preview" and on DVD.
    The actual films were great with a real AVCHD resolution on DVD.
    Why does this happen to the menus? Do I need to burn out my movies without menus?

    Hi Bill,
    Thanks for the welcome.
    I have only used HD Menu Sets.
    But which one of the Available Presets in Project settings shall I use according to my camera settings (see my first question)?
    gardie10
    19 mar 2012 kl. 15:35 skrev Bill Hunt:
    Re: Very bad resolution in menus (templates)
    created by Bill Hunt in Premiere Elements - View the full discussion
    Did you use an HD Menu Set, or and SD Menu Set. As your AVCHD material is HD, you should use only an HD Menu Set.
    I also assume that you chose the proper Preset at New Project, to match your footage 100%. Is that correct, or did you choose something else.
    For the HD Project from that footage, you should be authoring a BD (Blu-ray Disc) and not a DVD, which is SD, and not HD, like the footage. Did you mean BD, when you typed "DVD?"
    Good luck, and welcome to the forum.
    Hunt
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4275606#4275606
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4275606#4275606. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • PAR Correction Quality very bad in CS5

    Hi,
    in earlier versions of After Effects it was possible to set the quality of the Pixel Aspect Ratio Correction to "high" resulting in a very nice and clean preview. In CS5 this seems to be not possible anymore, because the standard and already set option in CS5 is "high". Anyway - the PAR correction looks very bad in CS5, giving me choppy vertical lines. Is there any chance to get a clean result like in CS4?
    Thanx!

    The Zoom Quality preference also affects pixel aspect ratio correction for previews.
    Keep in mind that the pixel aspect ratio correction setting in viewer panels is just a preview setting; it has no effect on final output.

  • T400: Very bad experience

    I really don't know where to start, I have had so many problems with the T400 from the past one month! So, let me start at the beginning: 
    PC Config: WinXP, P8600, 4 GB Ram, 160 GB/7200 RPM, ATI 3470 card.
    1. I got the the PC the 2nd of October. Out of the box, the computer was slow, much slower then my one year old Dell Vostro (1.6 core2duo, 160 GB/5400 RPM, 2 GB RAM, Win XP). The Vostro trumped the T400 both in boot time and regular usage. 
    2. I then started having issues with the display. Started getting weird lines on the screen. The speakers were making a screeching sound and there were some issues with the microphone as well. Called up Lenovo tech support and sent the PC to the service center. To top it off, I had a very bad keyboard with abnormal amounts of Flex and a displaced thinklight which was illuminating me rather than the keyboard. 
    3. The folks at the service center replaced the system board and also said they fixed the speakers. 
    4. I got the computer back and I continued having issues with sound. Sometimes, it doesn't play. And when it does, it has that screeching sound again. The PC was incredibly slow too. No improvements in the booting speed or speed during regular use. The didn't fix the computer back properly and everything from the plastic around the display to the case around the over the media card was loose. I could make out they hadn't put it back properly and I would press it in and it would come out. Moreover, the computer started hibernating all of a sudden. It is so irritating when you are in the middle of a presentation and all of the sudden the computer goes off. I had to restart it constantly. It also hibernates suddenly when I start up the computer from hibernation mode. I enter the windows password and once I'm in windows, the PC hibernates. 
    5. I called up technical support and told them all these issues. They said I can send it back in again for repair. I told 'em I would rather want the PC replaced rather than send it to repair again since I may have start having issues with it again. After 8 factory restorations, moving 100 GB data around each time and installing all applications again, I was fed up. 
    6. They agreed to replace the PC and I got the new computer today i.e.., 4th Nov '08. This is where things get interesting. The computer started up normally and I got the initial settings configured. Once I got into windows, the first thing I did was restart the computer. As it was booting, it froze at the XP loading page. I restarted the computer via the power button, and the same thing happened. I continued restarting for another 3 times with the same result. So, assuming a bad OS installation, I went ahead and did a clean install through thinkvantage. As the installation was going through, at some point of time, the PC restarted and got stuck at the same XP screen again. I restarted it a couple of times until, fortunately it went through. It then started installing applications and for some reason, it restarted and again got stuck at the XP loading screen. As of now, it is stuck there and won't go through.
    7. I got on the phone with tech support and the only thing they could do was to send it to the service center. 
    A brand new computer right out of the box is heading to the service center. It doesn't feel like a new computer any more the moment it goes to the service center. I'm utterly and totally disappointed with the way Lenovo is building these computers. If this is the case, I might as well take my business elsewhere. 
    I don't know if I'm the only person out here with such problems or if there are any one else. And, I apologise for such a long post.. Please tell what I can do now. I don't want to go through the same headache again. 

    If it was 'really dark/ clear' then why sales guy was offering me a contract with a phone? Also, he said everything is clear from their side when I said I am interested in the best buy offer. This is very bad when you are ready to sell on your contract, but don't allow customers to buy from others.
    Just wanted to let you know this 'customer service' as I spent more than half day in long waiting at both best buy and verizon shops... I thought I would get some solutions... Anyway, I moved on...

  • Very bad microphone quality with LCCS on Android

    Hello,
    I have created two applications with LCCS (audio and video conferencing), one for Windows and one for Android devices.
    From my PC, all work very well. When I speak with my desktop microphone, the sound delivered to my phone is good.
    But, when I speak with my phone, the sound delivered to my PC is very bad.
    Maybe LCCS doesn't configure mobile microphone correctly ?
    By the way, on mobile Microphone.getEnhancedMicrophone returns null and falls back to getMicrophone instead.
    Any idea ?

    OK I found that SPEEX codec result on Android (and maybe on iOS) is very bad when streamed. If I use instead the old NELLYMOSER codec, the result seems to be correct. Not fantastic, but correct.
    I thought that SPEEX codec was fully supported and very good on Android... Am I wrong ?
    Is there somebody here who try to use SPEEX codec on mobile ?

  • My new iPod Touch 4g(iOS5) camera result is soo poor than iPhone 3g

    The camera result of the iToich is so disgusting and even it is not compared to any iPhone camera .And even recording they stated HD. but i cant find meaning of HD for iPod Touch.The result is so poorrr.

    The 4G iPod back still camera is only 0.7 MP.  The iPhone 3G has about three time the MPs, it has 2 MP.
    HD is defined by bytthe number of pixals, not by the quality. HD is 1,280×720 pixels (720p) or higher.  The 4G iPod can do HD video (requires 0.9 MP) bu does not use all those pixals for still. Still are only 0.7 MP.  Under very good light, the iPod backcamera takes good photos commensuraate with only having 0.7 MP.

  • Help needed very BAD, how to manage layout which is going to 2 pages

    Hi all,
    Need your help very bad. I am very new to reports.
    I have a layout which goes to the second page. First page is a form layout (One record). I drew the form layout and placed all the fields in the form and works fine. But my problem is when I have 3 fields which are on the second page, because it doesnot fit in the first page. When I run it, the form (first page) get printed for all the records and the second page get printed only in the last at the end after printing all the records. How do I ask it to print it simultaneously. First page then the second page and so on. I set the PAGE BREAK AFTER to YES and still does not work.
    Please guys need your help.
    Thanks.
    Joe.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Video resolution with Sony Alpha 7 is very bad

    Hi!
    The Videoresolution in PSE 13 Organizer is very bad. Looks like the Videos were made with a cheap mobile-phone.
    Video playback works fine with every other Programm on my PC, for example VLC or Media Player, but when i try to view these Videos with PSE 13 they look awful - unsharp and blurry - same in Premiere Elements 13.
    Have already tried to install Codec-Pack for Win 7, but no changes.
    Maybe PSE uses a wrong codec? If so, how can i change this?
    Camera is Sony Alpha 7, OS is Win 7, Graphichs card is CPU-built-in Intel-HD3000(don´t know if this matters?) with newest Drivers.
    File extension is .mts, format is AVCHD (1920*1080) full HD.
    *edit: maybe it´s helpful if i mention that CPU load is about 30-40% in PSE 13 compared to ~6% when using VLC or Media Player when playing these videos.
    I would be grateful for any suggestions.
    edit*
    after some research:
    let me clarify the problem: is there ANY WAY TO CHOOSE THE CODEC  PSE 13 uses for videos??

    Hi,
    It is by design and we have no option to change it.
    However, we can use Pan Control to enlarge and move around the screen.
    Pan Control: The pan control enables the screen to be enlarged and moved around.
    Enable the pan control: Tap the pan icon in the connection bar to display the pan control and zoom the screen.
    Use the pan control: Tap and hold the pan control and then drag in the direction you want to move the screen.
    Move the pan control: Double tap and hold the pan control to move the control on the screen.
    Disable the pan control: Tap the pan icon in the connection bar to return the screen to its original resolution.
    Thanks for your understanding.
    Jeremy Wu
    TechNet Community Support

  • Fios Internet connection is very bad! Please help!

    Hello,
    I play an online game called Final Fantasy XIV.  I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
    Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS.  I contacted WTFast with a tracert that they analyzed, and here is their response:
    "Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
    The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
    Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
    Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
    015-02-25 00:09:36
    Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
    Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
    lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
    T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
    —— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
    0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
    TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
    teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
    cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
    Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
    February 25, 2015, 11:56
    I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss.  I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.  
    Can anyone help me out with this please!  Thank you for reading!

    bap4201 wrote:
    I'm trying to, but can't seem to format it properly
    Open a command prompt and enter the tracert command
    then select the cmd prompt icon - top left of the cmd prompt window
    select edit, mark
    highlight the data you want to copy - the tracert data
    select the cmd prompt icon again
    select edit copy
    put the cursor in the post window in the forum
    and hit ctrl-v - as below
    C:\Users\Peter>tracert wtfast.com
    Tracing route to wtfast.com [190.93.243.228]
    over a maximum of 30 hops:
    1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
    2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
    .1]
    3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
    .212.48]
    4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
    51.220]
    5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
    6 * * * Request timed out.
    7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
    8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
    9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
    78]
    10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
    11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
    12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
    52.174]
    13 11 ms 12 ms 11 ms 190.93.243.228
    Trace complete.

  • The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

    The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

    Also it was not and never has been jailbroken if that helps.

Maybe you are looking for