6120 classic error - Connected phone was not recog...

I have used the software updater before, but now when I try and use it I am told Phone is not supported, connected phone was not recognized.
I have uninstalled and re-installed the program, PC suite works and recognizse my phone, I can back up etc.
Does anybody have any ideas how I can solve this problom

The updates for the 6120 classic have been removed due to a problem with either the software updater or the firmware.
They will be returned when the problem has been fixed.

Similar Messages

Connected Phone Was Not Recognized!!!

When i'm trying to update my phone software the nokia software updater shown this msg (Connected Phone Was Not Recognized). I'm complete uninstall & reinstall NSU but there was same problem. Guys tel me what can I do now?????

Hi gulu20072010
You don't say which model of phone isn't recognized.
If you haven't already installed Nokia PC Suite then you are usually prompted to install PC Connectivity Solutions when you install Nokia Software Updater.
Unfortunately after un-installing applications, entries remain in the registry which can sometimes cause problems.
Happy to have helped forum in a small way with a Support Ratio = 37.0

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
   //Set up UI
   textArea = new TextArea();
   textArea.setSize(500,280);
   textArea.move(20,54);
   addChild(textArea);
   textInput = new TextInput();
   textInput.setSize(500,24);
   textInput.move(20,340);
   textInput.addEventListener(ComponentEvent.ENTER,checkKey);
   addChild(textInput);
   button = new Button();
   button.width=50;
   button.label="Send";
   button.move(20,370);
   button.addEventListener(MouseEvent.CLICK, sendMsg);
   addChild(button);
   chatName = new TextInput;
   chatName.setSize (100,24);
   chatName.move (80,370);
   chatName.text="<Enter Name>";
   chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
   addChild(chatName);
   //Connect
   rtmpNow="rtmp:/VideoChat ";
   nc=new NetConnection;
   nc.connect (rtmpNow);
   nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
   cam = Camera.getCamera();
   mic=Microphone.getMicrophone();
   //Camera Settings
   cam.setKeyFrameInterval(15);
   cam.setMode (240, 180, 15, false);
   cam.setMotionLevel(35,3000);
   cam.setQuality(40000 / 8,0);
   //Microphone Settings
   mic.gain = 85;
   mic.rate=11;
   mic.setSilenceLevel (25,1000);
   mic.setUseEchoSuppression (true);
   //Video Setup
   vid=new Video(cam.width, cam.height);
   addChild (vid);
   vid.x=10, vid.y=20;
   //Attach local video and camera
   vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
   good=e.info.code == "NetConnection.Connect.Success";
   if(good)
    //Set up shared object
    text_so=SharedObject.getRemote("test", nc.uri, false);
    text_so.connect (nc);
    text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
   for (var chung:uint; change<e.changeList.length; chng++)
    switch(e.chageList[chng].code)
     case "clear":
      break;
     case "success":
      break;
     case "change":
      textArea.appendText (text_so.data.msg + "\n");
      break;
private function cleanName(e:FocusEvent): void
   chatName.text="";
private function sendMsg(e:MouseEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
private function checkKey (e:ComponentEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
   msg=e.info.code == "NetConnection.Connect.Success";
   if(msg)
    nsOut=new NetStream(nc);
    nsIn=new NetStream(nc);
    //NetStream
    nsOut.attachAudio(mic);
    nsOut.attachCamera(cam);
    nsOut.publish("camstream");
    nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

The software required for communicating with ipod and mobile phones was not installed correctly

ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10 64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Wireless OOB NACissue : OOB Error: connected device client_MAC not found.

Dear all,
I've deployed wireless OOB NAC. Some user can login normally, but some other user can not login. The error message is OOB Error: connected device <client_MAC> not found. This only happen at some PC user.
Does anybody have any idea?
Thanks

Dear all,
When some wireless user cannot login, i usually issue command clear mac address-table dynamic on the switches then the problem is solved temporarily. I wonder why this was happened. Is there any parameter that i need to tune in NAC or WLC or switches?

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

RW-00023: Error: DBC file was not created- When try to install 11i on OEL5

I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard.

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

TS1424 i cant open up itunes, comes up with error mcvcr80.dll was not found

help
itunes will not upgrade not can it open after re installing
i get the error mcvcr80.dll was not found

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99504)

My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it?????

My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it???? As soon as I remove it from the computer it goes completly off again???????

Hey beaches37,
Thanks for the question. I understand you are experiencing issues with your iPhone 5s. You mentioned you received an error when attempting to restore. If you remember this error, the following article may help to resolve it:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Furthermore, you may want to try restoring your iPhone in recovery-mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Import-SPWeb Error - The string was not recognized as a valid DateTime. There is an unknown word starting at index 0

Using the Export-SPWeb PowerShell command on a server to move a document library from one site colelction in a content database to another site collection in a seperate content database.
Am using the following command:
Export-SPWeb
-Identity
https://sp.bacl.net/legal/rr
-Path
\\bacvsspa01\backups\rr\rr.cmp
-ItemUrl
rr
-IncludeVersions
All
-IncludeUserSecurity
Not all documents are transferred hwoever. I get some errors like the following:
[11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg] Progress: Importing
[11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Verbose: List URL: /legal/legal/rr
[11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Error: The string was not recognized as a valid DateTime. There is an unknown word starting at index 0.
[11/02/2014 2:21:44 PM] [ListItem] [16Jun11 17.32.09_BAC employees provid_Tom Heading.msg]   Debug:    at System.DateTime.Parse(String s, IFormatProvider provider)
   at System.Convert.ToDateTime(String value, IFormatProvider provider)
   at System.Runtime.Serialization.SerializationInfo.GetDateTime(String name)
   at Microsoft.SharePoint.Deployment.MetaInfoProperty..ctor(SerializationInfoHelper infoHelper)
   at Microsoft.SharePoint.Deployment.FileSerializer.GetMetaInfo(SerializationInfoHelper infoHelper)
   at Microsoft.SharePoint.Deployment.FileSerializer.CreateOrUpdateFile(Object fileOrListItem, SPLoggerObject loggerObject, SPWeb web, Guid id, String& fileUrl, Boolean fileExistsInDb, Boolean isFirstVersion, Boolean hasWebParts, SerializationInfoHelper
infoHelper, SerializationInfoHelper infoHelperListitem, StreamingContext context)
   at Microsoft.SharePoint.Deployment.FileSerializer.CreateOrUpdateFileAndAssocData(Object fileOrListItem, SPLoggerObject loggerObject, SPWeb web, Guid id, String& fileUrl, Boolean fileExistsInDb, SerializationInfoHelper infoHelper, SerializationInfoHelper
infoHelperListitem, StreamingContext context, ISurrogateSelector selector)
   at Microsoft.SharePoint.Deployment.ListItemSerializer.AddOrUpdateDoclibItem(SerializationInfoHelper infoHelper, SPListItem& listItem, SPLoggerObject loggerObject, SPWeb web, Guid newId, String& listItemServerRelativeUrl, Boolean bIsPublish,
Boolean exists, StreamingContext context, ISurrogateSelector selector)
   at Microsoft.SharePoint.Deployment.ListItemSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
I had a look in the .cmp file that was created (Changed extensions to .cab) and had a look at the Manifest.xml file. Relevant XML below:
<SPObject Id="b18cc711-e5df-4ee7-9639-866e5b6613b0" ObjectType="SPFile" ParentId="1ad76e87-43e6-4cbf-a0a1-53af4975668f" ParentWebId="4be7e61f-b1c7-473f-acc3-0bae06e32024" ParentWebUrl="/legal/rr" Url="/legal/rr/rr/Employees
giving First Aid/16Jun11 17.32.09_BAC employees provid_Tom Heading.msg">
        <File Url="rr/Employees giving First Aid/16Jun11 17.32.09_BAC employees provid_Tom Heading.msg" Id="b18cc711-e5df-4ee7-9639-866e5b6613b0" ParentWebId="4be7e61f-b1c7-473f-acc3-0bae06e32024"
ParentWebUrl="/legal/rr" Name="16Jun11 17.32.09_BAC employees provid_Tom Heading.msg" ListItemIntId="37" ListId="020f8304-a50f-413b-be27-40d0ccc9e497" ParentId="1ad76e87-43e6-4cbf-a0a1-53af4975668f" TimeCreated="2011-11-16T07:02:00"
TimeLastModified="2011-11-16T07:02:00" Version="1.0" CheckinComment="Loaded Using Dell Solutions for SharePoint" FileValue="00000013.dat" Author="29" ModifiedBy="24">
            <Properties>
                <Property Name="vti_title" Type="String" Access="ReadOnly" Value="BAC employees providing first aid" />
                <Property Name="source_item_id" Type="String" Access="ReadWrite" Value="source_item_id:1" />
                <Property Name="vti_foldersubfolderitemcount" Type="Integer" Access="ReadOnly" Value="0" />
                <Property Name="Attach Count" Type="String" Access="ReadWrite" Value="Attach Count:0" />
                <Property Name="Created By" Type="Boolean" Access="ReadWrite" Value="Created By:BNE_AIR1\\jbrown" />
                <Property Name="Importance" Type="String" Access="ReadWrite" Value="Importance:1" />
                <Property Name="From1" Type="Time" Access="ReadWrite" Value="From1:Tom Heading" />
                <Property Name="AttachCount" Type="String" Access="ReadWrite" Value="AttachCount:0" />
                <Property Name="ContentTypeId" Type="String" Access="ReadWrite" Value="0x0101003699C96894FF79479322E4A235852946000530E240279BA54D8F621B39A4E09CF3"
/>
                <Property Name="Modified By" Type="Boolean" Access="ReadWrite" Value="Modified By:BNE_AIR1\\jbrown" />
                <Property Name="vti_folderitemcount" Type="Integer" Access="ReadOnly" Value="0" />
                <Property Name="display_urn\:schemas-microsoft-com\:office\:office#Author" Type="String" Access="ReadWrite" Value="Jenny Brown"
/>
                <Property Name="Document Created By" Type="Boolean" Access="ReadWrite" Value="Document Created By:BNE_AIR1\\jbrown" />
                <Property Name="Created_x0020_By" Type="Boolean" Access="ReadWrite" Value="Created_x0020_By:BNE_AIR1\\jbrown" />
                <Property Name="vti_cachedtitle" Type="String" Access="ReadOnly" Value="BAC employees providing first aid" />
                <Property Name="Modified_x0020_By" Type="Boolean" Access="ReadWrite" Value="Modified_x0020_By:BNE_AIR1\\jbrown" />
                <Property Name="ContentType" Type="String" Access="ReadWrite" Value="Legal Document" />
                <Property Name="Attach_x0020_Count" Type="String" Access="ReadWrite" Value="Attach_x0020_Count:0" />
                <Property Name="display_urn\:schemas-microsoft-com\:office\:office#Editor" Type="String" Access="ReadWrite" Value="Jenny Brown"
/>
                <Property Name="vti_parserversion" Type="String" Access="ReadOnly" Value="15.0.0.4535" />
                <Property Name="To" Type="Boolean" Access="ReadWrite" Value="To:Barry Peach" />
<Property Name="From" Type="Time" Access="ReadWrite" Value="From:Tom Heading" />
                <Property Name="Document Modified By" Type="Boolean" Access="ReadWrite" Value="Document Modified By:BNE_AIR1\\jbrown"
/>
            </Properties>
        </File>
    </SPObject>
Now, looking at the source document library, this document has the field in question set to String, so why has it been marked as a Time filed type in the expiort file?
Is anyone aware of any issues with the Export-SPWeb commandlet?
SharePoint 2013 + March PU + AUG 2013 CU.
Any help appreciated.

Hi Richard,
According to your description, the error occurred when you ran the Export-SPWeb command.
I recommend to verify the things below for troubleshooting:
Save the document library as an template(include content) and create a new document library based on the template, then run the Export-SPWeb command to export the new document library to see if the issue still occurs.
Did this issue occur with other document library? If not, you can delete the string field with error, then run the Export-SPWeb command to narrow the issue scope.
As a workaround, you can save the library as a template and deploy it to the site collection where you want to move the library, then create the new library in the site collection.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Whenever i open itunes after installation it says error 7 itunes was not installed correctly

whenever i open itunes after installation it says error 7 itunes was not installed correctly

For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components may allow you to install Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

My phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.

6120 classic error - Connected phone was not recog...

Similar Messages

Maybe you are looking for