6120 Fixed Port License Usage

I was looking around in the 6120 via cmd line and noticed that the "show license usage" output shows that there is an 8 port license but than none are in use. If that is the case do what does licensing the remaining 12 ports do? What happens if you use two of those for northbound Ethernet uplinks?
show license usage
Feature                      Ins Lic   Status Expiry Date Comments
                                 Count
FM_SERVER_PKG                 No    -   Unused             -
ENTERPRISE_PKG                No    -   Unused             -
FC_FEATURES_PKG               No    -   Unused             -
ETH_PORT_ACTIVATION_PKG       No    8   Unused Never       -
ETH_MODULE_ACTIVATION_PKG     No    0   Unused             -

Hi.. I have a similar output in my lab setup. In my lab setup, i did not purchase any license and i can use port 19 and 20, in fact all of the ports. It looks like the license is base on trust and not really enforced. Rgds Eng Wee

Similar Messages

License Usage on CWMS Version1.5 - 50 Port Deployment without IRP

I am not able to understand how the license usage is being accounted in CWMS 1.5.
Currently I have deployed CWMS - 50 Port without IRP. The CWMS 1.5 is integrated with CUCM 7.X. There are 3 hosts configured on the system and the license count is increasing for every meeting that is scheduled. The license count increases only when the first participants joins the meeting.
I have tested a few scenarios -
1. I have hosted a meeting and I joined only the teleconference, Other participants joined the meeting and the license count increased by '1'
2. I have hosted another meeting at a different time and did not join the meeting. Other participants joined the meeting and the license count increased by '1'
Please Note - In both scenarios the Atendees Join before host option was checked.
I am currently refering the licenses usage scenarios posted on Cisco and has not found any resemblance.
http://www.cisco.com/en/US/docs/collaboration/CWMS/b_planningGuide_chapter_0111.html
Request your help in clarifying how the license usage counts increment.
Thank you.

Hi Joseph and Benjamin,
I am not sure whether you have got the answer for this already, anyway, here is the explanation.
There is a defect opened for incorrect license count shown in the CWMS dashboard. You can check the defect details in the link below,
https://tools.cisco.com/bugsearch/bug/CSCul57521
Our development team analyzed the above defect and identified the root cause of this issue as another defect. The defect details can be seen in the link below,
https://tools.cisco.com/bugsearch/bug/CSCul03486
To summarize the above two defects, sometimes, the telephonic session in CWMS doesn't end correctly and stays active through out. Hence, all the meeting initiated by this user will have one simultaenous meeting always. This is the reason, for licensing count getting increased even the meeting is scheduled in different date and time.
Let me know if you need any further details.
Regards,
Hari

Installing 10G port licenses on 6120, what the crap?

Got a box of licenses for a 6120 UCS. Have like 40 10GB port licenses. But they are a CD, that has vague documentation on it, and a card with a "Product Authorization Key" on it.
Cannot figure how under "License Management" to install these. It only offers "Download License" local and remote. Cannot type in a license key. Are these importable via CSV? I see that I can export licenses that way.
Craig

Craig,
Go to here:
http://www.cisco.com/go/license
Log in with you CCO ID and enter the PAK (Product Authorization Key) there. Follow the steps on the site.
You will then get a .lic file that you upload to the 6120 using the "Download License" option (Local is for the file on your computer, remote is if the file was on a ftp server or a share or something)

System Measurement: Measure and report license usage - System Type

After a 'system copy' to create new DEV and QAS PORTAL systems from a copy of PROD the USMM (System Measurement: Measure and report license usage) process identifies the System Type of the new systems as PROD.
This was first noticed when performing a 'License Audit'.
System Type: PROD
(Ex: URL http://<server>:<port>:50000/usmm)
Where can the 'System Type' be changed after a 'system copy'?

Hi,
You can change the System Type in Visual Admin under service Licensing Adapter.
Thanks
Sunny

NEXUS 3548 with 24 Port License

Ive a 3548 box with 24port Lic,My concern is about the functionality of the remaining 24 Ports.Will there be a problem with the rest of the 24 ports while in production.
NX3548# sh inventory
NAME: "Chassis", DESCR: "Nexus 3548 Chassis"
PID: N3K-C3548P-10G    , VID: V02 , SN: XXXXXXXXXX
NAME: "Module 1", DESCR: "48x10GE Supervisor"
PID: N3K-C3548P-10G    , VID: V02 , SN: XXXXXXXXXX
NX3548# SH LICense usage
Feature                      Ins Lic   Status Expiry Date Comments
                                 Count
24P_LIC_PKG                   Yes   -   Unused Never       -
24P_UPG_PKG                   No    -   Unused             -
LAN_BASE_SERVICES_PKG         Yes   -   Unused Never       -
ALGO_BOOST_SERVICES_PKG       No    -   Unused             -
LAN1K9_ENT_SERVICES_PKG       No    -   Unused             -
LAN_ENTERPRISE_SERVICES_PKG   No    -   Unused             -

Hello Dhanesh,
thanks for your reply.
We have 2 3548 licensed exactly as your Nexus.
After a reboot of the two Nexus the first 4 ports (of the two) had problems (no input packets, only ouput packets, so unusable). There was connected devices with GLC-T, so they worked at 1 G, not 10G.
We opened a TAC Case about this and, after remote session and many analysis, the engineer decided to replace the two devices.
Despite this I have still some doubt.
I found the discussion below and I post some logs of one of the Nexus, we use the 10 G not in a contiguous way.
Thanks and regards
https://supportforums.cisco.com/discussion/12073821/nexus-3548-24-port-license-what-ports-use
371) Event:E_DEBUG, length:55, at 552701 usecs after Sat Mar 14 20:02:11 2015
    [825307441] Couldn't send grace period data: No route to host
372) Event:E_DEBUG, length:58, at 255834 usecs after Sat Mar 14 19:02:57 2015
    [825307441] Couldn't fetch grace enabled status: no such pss key
373) Event:E_DEBUG, length:55, at 819209 usecs after Sat Mar 14 19:02:18 2015
    [825307441] Couldn't send grace period data: No route to host
374) Event:E_DEBUG, length:44, at 818664 usecs after Sat Mar 14 19:02:18 2015
    [825307441] Failed to get VDC map: no such pss key
375) Event:E_DEBUG, length:44, at 818270 usecs after Sat Mar 14 19:02:18 2015
    [825307441] Transient read error in glob_refresh()
376) Event:E_DEBUG, length:60, at 813122 usecs after Sat Mar 14 19:02:18 2015
    [825307441] Expiry date for feature LAN_BASE_SERVICES_PKG: 3650000
377) Event:E_DEBUG, length:50, at 773120 usecs after Sat Mar 14 19:02:18 2015
    [825307441] Expiry date for feature 24P_LIC_PKG: 3650000
378) Event:E_DEBUG, length:30, at 716563 usecs after Sat Mar 14 19:02:08 2015
    [825307441] checking confcheck config
N3K-DC-1# sh int status
Port          Name               Status    Vlan      Duplex Speed   Type
Eth1/1        *** FREE ***       sfpAbsent 1         full    1000    --
Eth1/2        *** FREE ***       sfpAbsent 1         full    1000    --
Eth1/3        *** FREE ***       sfpAbsent 1         full    1000    --
Eth1/4        *** FREE ***       sfpAbsent 1         full    1000    --
Eth1/5        UCS_UPLINK_FABRIC_ connected trunk     full    10G     SFP-H10GB-CU5M
Eth1/6        UCS_UPLINK_FABRIC_ connected trunk     full    10G     SFP-H10GB-CU5M
Eth1/7        --                 sfpAbsent 1         full    10G     --
Eth1/8        --                 sfpAbsent 1         full    10G     --
Eth1/9        --                 sfpAbsent 1         full    10G     --
Eth1/10       --                 sfpAbsent 1         full    10G     --
Eth1/11       --                 connected trunk     full    1000    1000base-T
Eth1/12       --                 connected trunk     full    1000    1000base-T
Eth1/13       --                 sfpAbsent 1         full    10G     --
Eth1/14       --                 sfpAbsent 1         full    10G     --
Eth1/15       --                 sfpAbsent 1         full    10G     --
Eth1/16       --                 sfpAbsent 1         full    10G     --
Eth1/17       --                 sfpAbsent 1         full    10G     --
Eth1/18       --                 sfpAbsent 1         full    10G     --
Eth1/19       --                 sfpAbsent 1         full    10G     --
Eth1/20       --                 sfpAbsent 1         full    10G     --
Eth1/21       --                 sfpAbsent 1         full    10G     --
Eth1/22       --                 sfpAbsent 1         full    10G     --
Eth1/23       --                 sfpAbsent 1         full    10G     --
Eth1/24       --                 sfpAbsent 1         full    10G     --
Eth1/25       --                 sfpAbsent 1         full    10G     --
Eth1/26       --                 sfpAbsent 1         full    10G     --
Eth1/27       --                 sfpAbsent 1         full    10G     --
Eth1/28       --                 sfpAbsent 1         full    10G     --
Eth1/29       --                 sfpAbsent 1         full    10G     --
Eth1/30       --                 sfpAbsent 1         full    10G     --
Eth1/31       *** FREE ***       notconnec 1         full    1000    1000base-T
Eth1/32       --                 sfpInvali 1         full    10G     1000base-T
Eth1/33       --                 sfpAbsent 1         full    10G     --
Eth1/34       --                 sfpAbsent 1         full    10G     --
Eth1/35       --                 sfpAbsent 1         full    10G     --
Eth1/36       --                 sfpAbsent 1         full    10G     --
Eth1/37       --                 sfpAbsent 1         full    10G     --
Eth1/38       --                 sfpAbsent 1         full    10G     --
Eth1/39       --                 sfpAbsent 1         full    10G     --
Eth1/40       --                 sfpAbsent 1         full    10G     --
Eth1/41       --                 sfpAbsent 1         full    10G     --
Eth1/42       --                 sfpAbsent 1         full    10G     --
Eth1/43       --                 notconnec 1         full    10G     10Gbase-SR
Eth1/44       --                 notconnec 1         full    10G     10Gbase-SR
Eth1/45       C3850-CORE [Port-C connected trunk     full    10G     10Gbase-SR
Eth1/46       C3850-CORE [Port-C connected trunk     full    10G     10Gbase-SR
Eth1/47       vPC PeerLink [Port connected trunk     full    10G     SFP-H10GB-CU3M
Eth1/48       vPC PeerLink [Port connected trunk     full    10G     SFP-H10GB-CU3M
Po2           C3850-CORE         connected trunk     full    10G     --
Po3           3750-DC            connected trunk     full    a-1000 --
Po4           UCS_UPLINK_FABRIC_ connected trunk     full    10G     --
Po10          vPC PeerLink       connected trunk     full    10G     --
mgmt0         --                 connected routed    full    a-1000 --

How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

Hello,
Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
But remote assistance ( msra.exe ) use a dynamique port and never the same.
How to use a fixed port for remote assistance ini windows 8.1 ?
And why i can't use easy connect ?
i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
Thanks

Hello,
Very good. It's a big range ( 255 mini from 49152 ) for a single port but if it's the only one possibility...
You are very helpfull ( i don't know if it's a good english but you make me very happy )
Merci beaucoup

Can Port Licenses on an MSE8000 be converted to a virtual TP Server?

I have a customer with an MSE8000 with 80 port licenses and 2 x 8420 blades.
They'd like to go virtual; is there any provision for converting these port licences into screen licences for a Virtual Telepresence Server?
Thanks
David

The only way you can convert MCU licenses to TelePresence Server licenses is if you have either an MCU 5300 Series or MCU MSE 8510 blade, and that is by the process of installing the TP Server software on the MCU because the hardware can support it.

Do I need VXML Port Licenses for CVP Database Lookup.

Hi,
Please let me know that whether VXML Port Licenses are required for CVP Database Lookup.
I am using CVP just for prompt playing in my scenario,
Appreciate your response.
Thanks,
Manish

[email protected],To make database integration with your IVR, you have different alternatives :1- Use the 'DB Lookup' node ICM scripting node for simple SELECT transactions on SQL Server databases2- Use an 'Application Gateway' component with ICM scripting for more complex database operations on different type of databases. Application Gateway is a software component developed by Cisco partners to make ICM scripts interact with different databases.3- Use VXML scripts. VXML scripts can connect and interact with any kind of databse using the JNDI protocol. You will need a VXML Studio license (to develop the VXML applications) and a CVP Server for VXML Servers (you need to deploy VXML servers on which you will deploy your VXML applications)Hope this will help.
Good summary. If I can comment ....
1. DBLookup is so restrictive it is not typically useful for looking up ANIs in a customer DB. It is useful for other things to do with routing - say a DNIS lookup to control some aspect of routing. Look up the restrictions on DBLookup if you don't believe me.
2. This may be an expensive proposition. Unless you have in-house experience with something like a CTI all events bridge and the ability to code to the required heartbeat interface, you will find building an app gateway tricky. You also need to be in the Cisco Developer's Program ($25k). I have colleagues write app gateways in C++ and VB.NET, so it's possible - just not trvial. For a huge load, this may be the only suitable method, however.
3. This is the way to go. JNDI is NOT a protocol - it is a naming standard. The protocol that the client (your application running under Tomcat) uses to talk to the server (the database out there) is defined by the library - the JAR file - you hook into it in VXMLServer\lib\endorsed. Through the JNDI specification in Tomcat\conf\server.xml you indicate the host, user name, password and client library that the system needs. Tomcat uses connection pooling to manipulate a pool of connections (threads) giving a more efficient database query system.
You can then add an additional sepcification through context.xml that allows you to use the JNDI spec in your VXML Database Element.
If you like coding in Java, you can write a Custom Action Element to use the JNDI (and therefore connection pooling), making your query and manipulating the result. This is the way I do it because I'm a competent programmer. Most will use the Database Element.
Finally, you could write a Java Custom Action Element that does not use the JNDI at all, but given the server, user, password and database through the settings, opens a connection, runs the query, and closes the connection.
Regards,
Geoff

Logged-in Resources stat not the same as license usage

Hello,
If I look in Real-Time Reporting, the number of logged-in resources is 29. If I go on the CLI and run show uccx cad license usage, it's telling me that there are 26 licences in use.
What's the reason for the difference?
I've tried counting the supervisors, but that doesn't give me the difference.

Hi Jemima,
Could you please cross check wih the UCCX's Real Time reporting ,Overall Cisco Unified Contact Center Express Stats report.
To access the Overall Unified CCX Stats report, choose Reports > Overall Cisco Unified Contact Center Express Stats from the Application Reporting menu bar.
Number of resources currently logged in.
This will give the accurate results.
Hope this helps.
Anand
Please rate helpful posts !!

License usage

Hi Folks,
Well I thought I was pretty happy with licensing, and what I understood was:
1. Licensing is based on number of concurrently active users.
2. An advanced license is used if an endpoint is allocated an authentication profile based on a rule which uses profiling information/posturing.
This shows my currentl licensing page:
and here's a summary from the front page:
Don't these two already contradict each other?
I've no idea where 28 advanced licenses have been used. No posturing in place, fairly simple setup, dot1x certs and MAB. Any tips for troubleshooting license usage?
Ver 1.1.4 Patch 3

bikespace,
In ISE 1.1.x, Advanced license is the count of postured, BYOD, or profiled endpoints
that are active in session directory.
You can make use of this API reference guide to check the Active session count.
http://www.cisco.com/en/US/docs/security/ise/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1068744
The API to check for Active Session count is as follows :
https://MNTise-node-name/ise/mnt/Session/ActiveList
Looks like issue with Dashboard query . Dashboard might be taking the count of stale Endpoint sessions as well.

Update AIM-CUE port license count .

Hi,
Yesterday I make migrate license via cisco license portal site to AIM-CUE,
but I make mistake for count of port license 1 (2 port) instead 3 (6 port) ,
how can I update this count of port ? on website it's not able to delete and
re-migrate the license again .
Regards

hi, still have not solved the problem and nobody has answered the question in this forum

UCCX - CTI Port Licensing

Hi,
We have a UCCX Express system consisting of 2 servers that has 60 CTI ports and is licensed for 300 IVR ports.
Does this mean I am licensed up to 300 CTI ports? Or are the IVR ports and CTI ports licensed separately? If I wish to increase the existing number of CTI ports, or create a second group, do I have sufficient licensing?
Thanks, James

Hi James,
300 licensed IVR ports are equivalent to your active (calls in CTI ports) CTI ports in use.
So you can create 300 or even more CTI ports from the First Node of UCCX (which is replicated in the second node of UCCX) but incase of active calls in the CTI ports only 300 CTI ports can be used at any given point.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !!

Consultation on License Usage Report.

Hi;
From one day to another, the "License Usage Report" section began the following message:
"The system is operating With An Insufficient number of licenses. If additional licenses to cover the shortage are not configured in your Enterprise License Manager Within 59 days, you will no longer be able to provision users and devices."
The query that I have is that the aggregate IP Phone says "Unassigned" then;
Should I add a Onwed each User ID? What with that that message would be solved?
image.
regards

refer the link which says
Licenses in the non-compliant state for Unified Communications Manager are enforced after a 60-day grace period. At the conclusion of the grace period,Unified Communications Manager enforces non-compliance with the following service degradation:
Devices and Users cannot be provisioned. Changing the configuration of a user that affects licensing (For example: the Enable IM and Presence and the Enable Mobility check boxes) is not allowed.
Devices and Users cannot be de-provisioned. Any configuration changes that involve licensing (For example: disabling IM and Presence or Mobility) is allowed.
you need to buy additional licenses to make the non-compliant phones work .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0100100.html
regds,
aman

UCCX Outbound IVR Port License Requirements

Hi, trying to figure out how many Outbound IVR port licenses are needed.
UCCX dials out, call is answered with a live voice, UCCX transfers to Application Trigger. No agent available, call is queued. At this point 1 Outbound IVR license is used.
Agent becomes available and call is transferred to Agent. At this point is the licensed port returned or is the license consumed until the agent hangs up?
Thanks.

Hi Chris
I dont think the outbound license will be held till agent answers the call.
Here's when outbound licenses will be released:
1. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to agents extension via gateway-sip trunk - CUCM. At this point, outbound port is free and agent takes the call
2. Outbound subsystem calls a contact, live voice is detected, dialer does a refer to IVR trigger. Outbound port is released. Here, the outbound contact is now connected to one of the inbound CTI ports which are associated to the IVR trigger
In summary, as soon as outbound port does a successful SIP Refer transfer, the outbound port is free to be used for next contact.
Regards
Shikhar

UCS Port Licensing with 2K Fabric Extenders

A FEX like a 2232 can be added to UCS to provide additional ports for connecting C-series servers. Do you still only license the ports used on the Fabric Interconnects - ie, I add a 2232 using 2x10GE uplinks to each FI, I gain 32 10GE connections for servers, but only use two port licenses on the FI?
Thanks,
J

Correct ! just be aware of the following caveat
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2.pdf
Maximum Configurable vNICs/vHBAs Based on Number of FEX Uplinks
Table 3: Cisco UCS 6200 Fabric Interconnect

6120 Fixed Port License Usage

Similar Messages

Maybe you are looking for