6120 silence problem
Help me please! Why are people I'm calling with my 6120 unable to hear me? I can hear them fine.
I've tried all the settings but nothing seems to work.
Is there a bug causing this, or am I just missing something incredibly obvious?
Zoe
Like a faulty mic for example?
I'd take the phone in to your nearest Nokia Care Point if I were you. That's what appears to have happened.
Message Edited by grschinon on 08-May-2009 04:54 PM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
Similar Messages
-
I have this phone for like 2 weeks now, and I encountered this problem 2 times already - I put the mobile on the table with like 80% energy left, I go to sleep, and when I wake up, I find the phone turned off and it cannot be turned on again. At first I was like "what the.." but then I found out that the problem was in battery - it was totally exhausted. So how come the whole battery got exhausted during 1 night? And why did it happen only 2 times during 2 weeks?
Iv encountered this probolem too. at firs i thought it was a faulty battery but soon found out that the 6120 has a very poor battery life. Im dissapointed too. need help!!!
-
hi, 6120 end of 3 contract - paid £15 to 3 to unlock it - bought O2 sim free contract and won't work - O2 say it's not properly unlocked - 3 say it's not their problem as they don't guarantee their unlocking. Is there any way I can now fully unlock my phone? Thanks hopefully
did you ask your previous provider if they unlocked it an unbranded it? there is a way to unlock your phone but it voids warranty therefore it can not be discussed on these boards.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
6120 classic problem connecting to Sony Ericsson H...
I have just purchased a Nokia 6120 classic, I am having difficulty getting sound. The unit connects and disconnects, but no sound on either caller or reciever end. Paring and reccognition fine.
Ya, I still think the issue is that the iPod can be used on those Sony Xplod models via an optional cable that plugs into the BACK of the unit and that the USB port on the front of the unit is for mass storage devices like USB thumb drives or maybe an iPod if it is set up to Enable Disk Mode and you put MP3s on the "disk drive" portion (vs. the "player" area) of the iPod like a normal drive.
Patrick -
Hello, first post
i ve got a problem the applications icon on the main menu when i add a theme it want change i have the nokia 6120c i m posting an sc same happens with other themes too
does anyone has the same problem ? i tried to update it with nokia updater but it still does the same prob
Message Edited by spidr on 22-Sep-200712:28 PMi mean that in every theme that i tried the applications button still remains the default icon and those themes got an moddified icon for sure i ve seen it when i downloaded the theme
korngear this maybe a solution i think i ll try which version i should try of the theme creator ?Message Edited by spidr on 22-Sep-200705:57 PM -
Hi everyone, I was directed here from another forum, and was hoping that someone could give me some good news.
I turned my phone off for about an hour today, and when I turned it back on, everything in the "Messaging" folder was deleted except for the templates.
All my other info (contacts, calender entries, notes, call logs) were left intact.
Normally I wouldn't mind, however there were some important messages which I hadn't backed up.
Is this a known problem? Is there anyway I can get these messages back, and lastly, is there a way to stop this from happening again.
Thanks in advance.I have hear of similar incidents. If it keeps on happening then you might have to take the phone to a Nokia Repair Center and ask them to check it out or replace it for you.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question... -
Hi,
I get the following error when trying to open the internet browser application on my Nokia 6120.
Error java/lang/Error Static initializer:
java/lang/RuntimeException:RMS ERROR:
Error while initializing reserved MIDlet RMS storage
Can anyone advise what I can do to correct this?
Thanks,
Johnwhen page is try to load, minimize browser and open connection manager, and see if any access is connected, and if connected, Sending/Receiving ?
take a look at signal bar too.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4 -
Hi,
I just got a nokia 6120. I found some keypad buttons are hard to press. the quality of the keypad is very poor.
Is every 6120 built with such poor quality of keypads?
CheersI find mine very responsive and very clicky, i love the keypad.
Can you specify which buttons are hard to press?
Nokia N95
V 20.0.015
0546553 -
Ok, today, after having the handset for under 2 weeks, the speaker where you have the phone to your ear to listen to calls has started packing up, sometimes you can hear, sometimes you can hear nothing - i tested this by putting the call on loudspeaker and it was fine.
I am with 3.
Is it a common problem? Or is it a one off?I think it is one off and may be taken to a service centre (authorised).
-
Equium L20-197: CD/DVD Drive Acoustic Silencer problems?
Hey there...
I recently used the little software button called "CD/DVD Drive Acoustic Silencer" to quiet the CD Drive whilst playing a CD.
Before this, a DVD would play fine... now... a DVD wil stutter, this is in ANY player. WinDVD5, Windows Media etc... I have clicked "Normal mode" hibernated, rebooted, turned off... nothing seems to work...
DVDs still skip... any help on this issue?Hello Danny
Which notebook model you have exactly? Was this software already preinstalled on your unit or you have installed it on your own?
Try to use system restore utility and roll back the system to earlier time. I dont know if this will help but you can try it. -
When I got the phone it had the most recent messages at the top but now for the inbox and sent messages they are sort of in the middle of all my messages. I Noticed the sort option but when I select by date or any of the options nothing happens.
I haven't had a nokia phone in a long time so I'm not really sure what I'm doing.Ok, Check the messages that are new in the middle.
Go to Messaging > Inbox > Go to the message > Options > Message details.
Are the dates of the message right?Message Edited by 6280 on 24-Oct-200710:37 PM
Nokia N95
V 20.0.015
0546553 -
6120 problems, phone goes silent
I bought a 6120 claasic, the camera didnt work and the phone kept going into a silent mode , i returned it and nokia gladly replaced it for me with a new 6120.
the problem im having with the new 6120 is same as the 1st one, after the phone sits for a while it goes silent, no keypad tones, ringtone or any sound, so i cant hear if people are ringing me or i am recieving a message, i have to restart the phone to fix the problem, im not changing any of my profiles in the phone like to slinent or anything else
i have updated my software in the phone, i'm wondering if anybody else has had this problem or is it a fault with this particular model, it just seems strange that 2 brand new phones do the same thing
thanksYes, this is normal behaviour. You can silence an incoming call without rejecting it by pressing either of the volume buttons, or the sleep/wake button. In addition, if you quickly press the sleep/wake button twice, iPhone will reject the incoming call.
-
ISE MAB is not Triggered for Linux Host
Hello,
We have configured MAB for hostst that do not support 802.1x, and in general working for most of the devices. For Some linux machines however, MAB is never triggered, i.e "debug mab all" and "debug radius" commands do not produce any output for the port. "show authentication session interface" command shows the 802.1x fail over to MAB, and after it MAB process starts to run but stays in running state without finishing.
If we put another MAB host as Windows 7 or XP or Printer, it works properly passsing tthe MAB Authentication and assigned Vlan. If we put the port as to the normal "switchport mode access" and "switchport access vlan x", the device shows up in the MAC address table of the switch, and starts to work.
As additional steps we have configured "authentication mode open" and "dot1x control-direction in" inorder to trigger or start the MAB Process allowing the packets out, but the "show interface " command the input packets counter remains 0, although output packet counters seem to increase continously to 1000 and above.
The IP Addresses are static, and it is a requirement, so dhcp may trigger MAB but this is not a choice currently.
IP device tracking is enabled, but again this did not change anything
Any recommendations or workarounds for this Problem? Although seems an endpoint issue, that it never produces a single packet , there may be some
solutions to trigger MAB or learn the switch the Mac address of the Linux host, i.e. keepalive. We are also looking at the host side,
The port configuration is:
switchport access vlan 98
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 97
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
Thanks in Advance,
Best Regards,Hi Ravi,
Since the linux is some kind of embedded linux, we could not get the tcp dump on the PC itself, but tried to see what is going on with a span of this port. What is interesting is that the machine does not produce even a single ethernet or IP packet and remains completely silent. (We thought dhcp would be solution but the configuration file only allows to statically assign IP address).
What we think is that somehow the machine starts to send packets after receiving a packet like Wake on LAN or arp. As you see on the port configuration the machine starts in Vlan 98, so in this Vlan it is not possible to get this packet from any other hosts on the same IP subnet since the IP of the host is Vlan 6. But in order to ISE to assign this Vlan 6 to the port with MAB, Mac Address of the host needs to be authenticated, which is not occuring because of the silence problem.
As a workaround to a similar problem, we changed the "switchport access vlan 98" to "switchport access vlan 6" and with this configuration the Mac address is learned and the host is authenticated by ISE and port is assigned to Vlan 6 dynamically which is observed on "show authentication session interface" command output. This is also not accepted because the access port configuration is required to be as standard as possible due to changing of the cabling frequently. So every MAB host should start with a PreAuthentication Vlan, and go to final Vlan after Authentication and authorizaiton with Posture checking or profiling.
As a second workaround these kind of machines are being worked on supporting dot1x, but this is a tedious process because often you need to escalate to the producer, and enhancement requests often prolong to be confirmed or denied.
Since we meet this problem also with some Printers, we think this is a problem of the TCP/IP Stack of the Operating System of the host. We are searching if there can be some mechanism to be able to make the host start conversation with a packet through a keepalive or some other protocol (or a script) that can be enabled.
Best Regards, -
Strange audio editing programs
Hi, I didn't see my problems already brought up so I am
hoping someone can help.
We are using Captivate to record narrated 'tours' of
websites, with the narrators not being the editors (so it is
difficult to get them to follow what should work best). We have had
to work with continuous audio (3-5 minutes)- it could be divided
into clips, but because of background and 'white noise' it sounds
wrong if there is any pure silence. Also, they are often clicking
on several things without slowing down their speech - this all
means that timing is very important.
I have not been using Captivate long but I am finding it very
frustrating to edit the audio because of several issues. The
computer is new and has little on it, and seems to run it all fine
without RAM or virtual memory problems or slowdown. Because of
timing adjustments I have been doing all this editing in the long,
full-length waveform audio editor.
1. I have no idea why, but bits of silence show up at some
point while I'm editing (deleting some audio and moving slide
markers), often in the middle of words. I don't think it's the
issue of adding more space to the end of a slide to conserve
minimum length, because it seems to occur in the middle of slides,
but this could be confused by:
2. After moving slide markers in an earlier portion of the
slide, all the later slide markers have sometimes moved as well.
This doesn't seem consistent but sometimes it makes everything
quite off. This wouldn't really be a problem except it means I am
only free to work beginning to end and not at whichever place I am
ready for. I saw this mentioned in another topic and I am really
hoping someone knows of a box I can tick to say "don't
automatically move slide markers for any reason without asking me
first" - it is maddening to make a change at slide 19 and have
everything after that be off.
3. Sometimes, when deleting the bits of silence, it will
delete them with no problem. Sometimes though, Captivate refuses to
delete them. It has nothing to do with slide length as I have
tested in on slides that are much longer than their minimum. Saving
what other changes I've made and coming back into the timing editor
also doesn't seem to work, it still won't delete them. Sometimes if
I highlight a larger area around them, it will delete part of the
larger area, but not usually the silent part. I have had to go into
the original files and mess with exporting/importing/re-editing the
bit of audio to get what I wanted in some cases.
4. Sometimes, when deleting a big of silence, in addition to
not deleting it, it moves my slide markers off by as much as 40
seconds. Say I am deleting a bit of mysterious-origin silence in
slide 39. After I highlight it and click X, the markers for slides
29 and 30 jump into view and slide 39 is way down at the end of the
presentation. There have been a few times I didn't catch this
before I clicked 'ok' and having to re-time everything because of
it is infuriating.
5. 1 in 7 or 8 times I edit audio, and click OK, it doesn't
save any of my changes. I don't get the 'rebuilding mp3s' screen
and all my changes are lost. Also maddening. There doesn't seem to
be a pattern as far as what changes I've made, how long the program
has been open, what other things might be running on the computer,
etc. It just does it sometimes.
These may not all be exactly what's happening, as I had a
hard time troubleshooting them - if I am looking at a portion of
the timeline and changes are happening elsewhere I don't know
about, they are hard to catch. I only could tell that every time I
made changes, I had to make other changes because of it, some of
them worse than others. I hope someone can tell me what is going on
and why Captivate seems to be acting so bizarrely for me.I'd be interested to hear the sort of background noise you
are experiencing. It might be possible to remove this using
Adobe Audition
as for silence or dead air, you could get around this by removing
the silence at the beginning of your audio files and moving the
sound object on the Timeline to 0.5 sec marker.
Voice-over is an art form that can take a long time to
perfect. One thing I would suggest is that you provide your
narrators with a script and make sure they rehearse it before
recording the narrative. This can go a long way to prevent the sort
of problems you have listed in your post.
quote:
At any rate it is impossible at this point for us to build the
presentations with individual sound clips - because of background
noise, any silence or dead air (like at the beginning of slides)
makes it sound really terrible. We also have inexperienced
narrators who aren't slowing down to click, and who aren't at hand
to re-record content. We need to go in and edit out the 'ums' and
'I meant to says' as well as fix the timing on some slides (and
rebuild backgrounds it didn't capture during recording). I'd edit
audio within each slide rather than in the audio timing editor but
that creates silence problems, etc.
HTH
Regards,
Mark
Adobe Community Expert -
Nokia N95 8GB 3G "Connection Error"
Hi all, when i use my 4 month old phone i was only experincing a small number of drop outs, now all i get is a connection error or network busy error everytime i try to make a call & incomming calls go straight to message bank. I did a factory rest on the phone settings & things seemed to work for a little while, but then stopped again. so i switched the phone to only use GSM & supprise supprise it works all the time now!! put it back onto umts & it wont connect, or into dual mode it may work sometimes!!
what can i do to get this problem fixed? it is the phone as i put the sim in another phone it appears to work fine (but that was a GSM phone that i used to) im with optus & rely heavily on my phone for business!! i just want it to work so i can be contactable 24hrs
Cheers
GregHad the same issue. My bet is you are trying to use a Telstra Next-G card in a non-Telsrtra Next-G phone.
The software is not compatible. You will need a Next-G phone.
I had to purchase two new phones N95 and 6120. Problem soleved.
The real issue is that sales staff do not really understand the difference between 3G and NextG.
Maybe you are looking for
-
Condition Types appearing two times in a Purchase Order
Hi, The condition types are same in supplementary schema (for Info Record) and Purchase Order Calculation Schema. When I put some value against a condition type under conditions in Info Record then that condition type appears 2 times in the purchase
-
Acrobat 7.1.0 multipage print job goes one page at a time
This condition existed before I installed the lastest update but it has not gone away so it must be a setting. When I send a multipage document to my printer (laserjet 4000) from Acrobat Professional the printer will start up (wakeup), print one page
-
How to register a created font in java 5?
Java 6 provides the registerFont(Font) method in GraphicsEnvironment to register fonts created using Font's createFont(int, InputStream) method. However, I need my application to work using Java 5. I looked in the Java 6 source code hoping to find th
-
Does an imessage recipient get the message instantly?
I'm considering to buy an iPhone 5s for imessaging and facetiming with my girlfriend. Some things are not clear to me about iMessage. My girlfriend thought iMessage works even without internet, but I read that it needs data or wifi, right? In case ce
-
I am having problem with post processing a simulation. Every time I hit the "plot parameter" button within the software I get the same error. Opening the file on a windows machine works perfectly fine, therefore I have tried updating the Java through