6120c auto restart after 15mins-8hrs.

I bought my unit from a colleague to replace the one i sent to my sister. This one works well just like my old one. But, i have just two problem. Autorestarting and Hellocarbide won't install. I am, at the moment, requesting a cer. Key with plans to sign apps myself (and hoping it could solve my prob w/ Hcarbide). But the autorestart gves me the remorse of buying a 2nd hand unit. Using SBCHFexplorer, i found out autorestart begins every after at least 10 mins to 8 hours the most. Of all things, it really gves me the hell when it happens during when i am listening to my audio files or radio. It gves a highpitched tone, then restarts. I have to open my files again or the radio. And the ttpod, i have rescan my files evrytime i open it. Whew! I have tried all posible means. Upgrade the latest firmware vr. Via nokia pcsuite, used a lower memorycard, format the unit *#7370#. Stil, the restarts persit. I used rambooster, turn off autostart apps.. Just need help so much. Can anyone recommend to me a solution, or an apps that can hold or stop the autorestarting? Pls. Pls. Pls.
I.U. framework vrs. 1.00(106)
OS vers. 2.00 (1177)
Sw vers. 07.10 30-07-09 rm-243
Lang. Vers. B14.03
Lang. Sw vers Vr APAC1 01-12-06 RM-243

Hello Ravi@Sl
I believe this is because in Sandbox mode the subscriptions end every 5 minutes, but they still exist and are getting renewed periodically (since they are auto-renewal subscriptions that you can test for auto renewing 6 times a day). So when you open the application again, the paymentQueue:updatedTransactions: method gets called to inform you of the 90+ updated transactions.
I have the same problem and I believe this is the issue. Since your post was a few months ago do you mind confirming this or giving an update on your research? Thank you.

Similar Messages

I-Tunes Auto-Restart After Closing Program

My i-Tunes began automatically restarting when I close the window on my desktop. It is pretty annoying.
It only restarts after I have had it open. If I have not opened i-tunes it behaves. But, if I open i-Tunes to listen to music on by desktop, and then close the program when I am done, it will restart within 10-seconds.
I am using Windows 7 and i-Tunes 10.2.2.12
I can't find a solution and sfter 15-minutes of trying to find a link to submit a help request, I gave up and am trying this avenue.
Thanks
Walt
PS: In the Product selection below, i-Tunes is not one of them. Hope this gets where it needs to go.

Thanks!
Shall I create de novell partition on the new\replaced HD?
Will Novell recreate the mirrored volumes automatically or shall I rebuild them manually?
TIA
Nanu
>>> Marcel Cox<[email protected]> 07/01/2007 20:47:06 >>>
Nanu Kalmanovitz wrote:
>
>Can be the "auto restart after abend" during the loading of NLMs be caused
>by the second HD dos (drive d:) partition?
Yes. FATFS.NLM tries to mount all FAT partitions it finds, not just the
boot partition. So any problem FAT partition may cause trouble.
>I tried the "FORMAT D: /s /x" command but it display the "Bad track in
>system space, disk unusable" error.
This sounds like your disk is physically broken. As a short term solution,
you can probably delete the DOS partition on D: but not create it again.
That way, FATFS.NLM will not try to fix the broken part of your disk. Of
course, you should as soon as possible replace your disk.
For this, you should first create and copy your DOS partition manually on
the new disk and then start your server and use NSSMU.NLM to manage the
mirroring of the NetWare partition(s).
Marcel Cox (using XanaNews 1.18.1.6)

Auto restart after update to IOS8 when facetime.

During the facetime my ipad have auto restart, and some the ipad is hanging need shut down the ipad and start again. but restart problem still exist.

Exchanged my 128GB iPad Air for the 3rd time this week, today. I showed the "geniuses" at the store a print out of the various postings on the site showing I'm not the only one with the problem. They only had two 128GB iPad Air's left in stock, one had IOS8 already, the other still had IOS7, needless to say I told them I wanted the IOS7. I swear I'm never ever updating this one!! They FINALLY agreed, they think its IOS8 causing all the crashes. They said they are going to contact the engineers immediately and send them the 3 iPad Air's I had this week so they can see exactly what happened to them. Hope they come out with a fix soon for everyone who does not have the ability to exchange their iPad like I did.

Mac wont boot, auto restarts after about 10 seconds

Hello,
My friend's mac has broken and it starts to boot for about 10 seconds, then auto reboots. He has tried booting in safe mode (holding down shift) but it doesnt change. Does anyone know how to fix it? He thinks it may be a virus, so is there a way to get it working so he can install AV software?
Thanks, Black_Sirrah239

Great Help so far, just to add...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

WL 7.0 Node Manager - auto restart after system boot fails

I have configured node manager to automatically restart managed servers on my Solaris
2.8 host. When I kill the managed server from the command line, node manager automatically
restarts the managed server just as I would expect. But when I reboot the system,
node manager does not restart the managed server. I started the managed server before
the reboot using node manager/admin console as the documentation states. I see nothing
in the logs that indicate any attempt by node manager to start the previously running
managed server, although node manager itself starts up OK after the reboot. Any
suggestions on how to get this working?
Here is my node manager config.xml contents:
#Saved configuration for webdevDomain_apps
#Sun Jul 14 23:12:08 EDT 2002
serverListenProtocol=http
serverListenHost=198.242.140.49
serverHealthCheckIntervalSeconds=180
TimeStamp=1026702630479
javaHome=/usr/jdk1.3
serverRestartDelaySeconds=60
command=online
ts2={3DES}QQj3hoYUACzB1csbrEth8Q\=\=
ts1=system
serverHealthCheckTimeoutSeconds=60
weblogic.Name=apps
java.security.policy=/home/weblogic/weblogic700/server/lib/weblogic.policy
RootDirectory=/home/webdev/weblogic700
serverStartArgs=-Xms64m -Xmx256m
- John

you are 100% right.
NM restarts MS's incase of
i) server crashes
ii) system reboots.
Kumar
John wrote:
Actually we were given a solution to this problem:
The node manager (NM) should restart managed servers (MS) upon reboot of the box.
There is one exception however - this can't happen if the MS is part of a cluster
and it hosts a migratable service. Currently there are two migratable services
- JMS and JTA. You need to have explicitly setup the migratable services for the
MS via the console.
Assuming you are not using these as migratable services you must explicitly set
a flag to indicate the MS is not hosting migratable services. This can be done
via the command line. It only needs to be done once and it will update the config.xml
file. The command line is:
java weblogic.Admin -url t3://adminhost:port -username <user> -password <password>
SET -mbean <domain>:Name=<MS name>,Type=Server -property HostsMigratableServices
false
You should see a simple reply of 'OK'.
Once this is done your should be able to reboot the box and after restart the
managed server should be running.
It worked!
Kumar Allamraju <[email protected]> wrote:
NM will only restart managed server's if they are abruptly killed.
We have no mechanism inplace to start managed server's upon system reboot.
May be you should write some startup scripts to start WLS upon system
start.
Kumar
John wrote:
I have configured node manager to automatically restart managed servers
on my Solaris
2.8 host. When I kill the managed server from the command line, node
manager automatically
restarts the managed server just as I would expect. But when I reboot
the system,
node manager does not restart the managed server. I started the managed
server before
the reboot using node manager/admin console as the documentation states.
I see nothing
in the logs that indicate any attempt by node manager to start the
previously running
managed server, although node manager itself starts up OK after the
reboot. Any
suggestions on how to get this working?
- John

Auto restart after crash?

I have an xserve that has crashed a few times recently. It is our mail server. Is there a way to get it to restart automatically if the OS crashes?

There was another device back in old Mac OS 7-8-9 days that was a power strip with a modem built-in. Two of the power jacks were tied to the modem, and if there was a server crash you would dial into the telephone line to which the modem was attached. That would trigger a power cycle on those two power jacks.
It might have been a pain to get an analog phone line into a computer machine room. For people who had the computer in their offices it would have worked pretty easily. I don't know if they still make something like that or not. I guess this is why Apple added the Lights Out Management feature on the Xserves. If you had the LOM configured on the Xserves you could power cycle the machines through the IP Address setup in the LOM module.

OS 8.6 won't quit or restart after hard shutdown

While testing a G3 266MHz beige mini tower running OS 8.6, the system hung and refused to shut down even when the power button was pressed and held, so I literally had to pull the plug. The operation it hung on was opening a folder containing a large number of files (several thousand) on a mounted volume from an OS 10.4.8 machine. Disk utility and DiskWarrior reported no damage after restarting the machine, however the machine now seems to have a problem: it refuses to shut down or restart from "Special" menu and still refuses to turn off from the power button. I can change the startup disk to a utility volume and run repairs from it, which I just did even though no damage reported, but when booted from the original disk problem is still there. Any ideas as to what's causing this behavior?
Thanks in advance for any insights.

Seems to be working OK after several restarts from utility volume. Maybe "auto restart after power failure" in Energy saver server settings had something to do with it.

[845 Series] Auto restart during os installation?!

can someone pls help me reasonly i am using p4 1.6 Willamate n i buy and 2nd 2.8 northwood n try to install it, it detected at bios, but when during window installation blue screen appear (too fast cant read what's about the blue screen) it will auto restart after that it restart at loading window logo. i do upgrade my bios,i do use 2 pair ddr ram for testing, each time i use single ram to test it (i just use basic system to test hdd, ram, graphic card, hdd n two cd-rom without network card),what was wrong with it? ram, heat, graphic card or incompetible cpu? the temp is around 52'C ?
pls pls help me . Before i give up the P4 2.8 thanks. it is fine when i change back to the old p4 with the full hardware.
below is my pc spc
p4 1.6 Northwood
MSI845PE MAX
2*512ddr 400 (run at 333) kingstam ram
6600gt vga
30 maxtor hdd
sony cd-rom
tdk combo drive
realteck network card

sorry wokannoby, so how do check the amps ? pls tell me i know nothing about it thanks

HELP: I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few mins, iphone will auto restart and freezes at the home screen which I can't unlock. I have to hold the "home" "off" button to restart the phone.

Dear all, please hel!!
I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few secs, the iphone with the IOS 5 firmware will auto restart and freezes at the home screen which I can't unlock. It will then freeze for a few secs before repeating the restart phase again and again and again.
To solve this issue, I have to hold the "home" + "off" button to restart the phone. Afterwhich, it will restart the phone. However, although my stuff are still on the phone, all my sms are gone.
Can someone please assist urgently.
My data was transferred from another iphone 3GS which is running an IOS 4.0.1 to another 3GS running ios 5.0.1
Is there a serious compatibility issue with both firmware?
Please help.
Thanks!

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

Allow auto-restart option after manual initiating Windows updates

When doing manual windows updates please provide a 'auto-restart' check box at the beginning of the process. It would make the process much cleaner if after begging the download/install process, (then walking off for coffee) if on return, the process
was finished rather the stopped at a 'Restart your PC to finish installing updates' request

When doing manual windows updates please provide a 'auto-restart' check box at the beginning of the process. It would make the process much cleaner if after begging the download/install process, (then walking off for coffee) if on return, the process
was finished rather the stopped at a 'Restart your PC to finish installing updates' request
1. This is Windows 10 TP forum. Are you sure you have posted in the right forum ?
2. Microsoft intentionally makes Windows Update automatic in Windows 10 TP. Manual update option is not even available.
3. If one wants Manual Update, one will have to do some registry editing.
Which brings me back to the first point..... are you sure you have posted in the right forum ?

HT201232 My I phone is restart after some time. Some times find out its off then if I press Home Power button then again re-start. Some time after coming apple logo it take auto restart ...display become blue color.

My I phone is restart after some time. Some times find out its off then if I press Home + Power button then again re-start. Some time after coming apple logo it take auto restart ...display become blue color. I have restored through I tunes and got I cloud backup. But stll have same problem.

Try once again to restore using iTunes, but this time without using a backup, to make sure that this is not software related.
If the phone still restarts on it's own, get it checked, this might then be hardware related after all.
Use iTunes to restore your iOS device to factory settings - Apple Support

PC coding for auto-play after restart

Here’s the set up...
I just finished authoring a DVD and in order to get the ROM features of the DVD to work – PCs have to install DVD@ccess on them. I found a free code online that runs a little slideshow and auto-installs the program and then the user has to restart the computer.
The problem is that our client wants the DVD player to auto-open after the restart.
We are looking for a programer to do this code alteration for us within the this coming week.
The code is at http://www.editorsbin.com/apple/dvdsp/projects/dvdaccess.html - in the file named dvdaccess_proj4.sit
Please mail me at [email protected] if this is something you might be able to do and we'll discuss timeframe and payment.
Thanks!
G5 Mac OS X (10.4.3)

hey there lasram & welcome to Discussions,
sorry there is no autoplay function after the menu plays.
good luck.

Auto Restart Issue with Mac Book AIR

Have been using a Macbook PRO for sometime, no problem with Parallel installed. Due to frequent traveling, light and compact is my priority now, so I bought another AIR (11" i7 chip w/ Parallel installed as well). It was working flawlessly for few weeks, used it to download a couple of updates when I was in China (approx. 4Mbit/sec line speed) still no issues. UNTIL when I get back to my office and using WIFI updated another few stuffs, the AIR started to behave strangely with "your computer needs to restart due to problem ..." the last few days it happened at least 10 times daily, so I did what I know with the usual Mac way, reset PRAM, repair permissions blah blah blah ..problems persists so I called the service centre and the technician I talked to suggested the issue could be from 'your moderate internet speed causing incomplete system updated files.' ; half convinced but I followed / reinstalled ...with no CD, it has to press option to select to reinstall -- only then I realized a big problem, originally it states requires 27 hours to reinstall a fresh LION in my AIR but finally it completed and restated in still about MASSIVE 7-1/2 hours time.
As I have bought a USB network connector now (a convenient gadget when stays at hotels with different levels of facilities offered), this is not so troublesome and I think fellow users should consider using network and avoid using WIFI for this purpose. I notice once the left USB once was used (without turning off the WIFI) it keeps breaking the connections, as I read some articles from this forum the left USB could has some stability issues. After all the time spent, the computer freezes at times and auto restarts again. What the heck has this causes the AIR to behave this way ?
NEXT, I also read on the Power issues, I bought it without realizing one of the technical highlight is on high performance battery management but you can chop my head off and sit on mine if the AIR can last 3 hours (probably the suggested time is with computer power on but without using it at all). I don't want to sound un-nice as I have been using Mac for many many years: 1) if AIR is entirely basing on internet (VERY HIGH SPEED) for support is not a really very friendly method for users if there is reliability issues via internet line support, says what if we are caught in remote area with 30k/sec line speed then we are totally dead ... ; 2) the recent scare makes me dare not using the software updates now, as technician suggested, write down what is required to update, find it from apple and do it manually ...Goohs, my Mac Book Pro using side by side doesn't has this issue. Since when was the last time I have to suffer maintaining a Mac myself ? ... @%#&@*!(!
Anyone has clue to these or simply return to service centre to handle for me ?
Thanks in advance (first time user in this community).

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Please Help! My MB pro 2010 quit and auto restart when I upgrade my MB Pro with a SSD

Hi all!
Please let me know what's happen with my Mac & help me to solve this problem pls?
Since my Mac is on normall working but a little bit slow. So that's why I update it to SSD. But from that day, when I'm working, it suddenly quit & auto restart without reason, just only appear the warning " Your Mac have problem" & restart.....
Attached here is which appeared on my screen after it auto restart, please go throught it & let me know what I should do for avoiding this problem, pls!
And here is my MAC info :
Macbook Pro 15-inch, Mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.8.5 (12F45)
My SSD info:
Total Capacity                       : 256.1 GB (256,060,514,304 Bytes)
Model                                   : V4-CT256V4SSD2
Firmware Version                  : S5FAMM22
Drive Type                           : Crucial SSD
HDD info:
Total Capacity                       : 320.1 GB (320,072,933,376 Bytes)
Model                                    : Hitachi HTS545032B9SA02
Firmware Version                   : PB3AC60W
Drive Type                             : HDD 5400 rpm
Please Help me!
Thank you!

Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

[SOLVED] NetworkManager auto restart even though I stop it.

Hi,
I enable NetworkManager at system boot.
# systemctl enable NetworkManager.service
After I stop NetworkManager manually, and run chromium/firefox, it restart NetworkManager again.
# systemctl stop NetworkManager
> Active: inactive (dead) since Fri, 12 Oct 2012 12:37:51 +0800; 24min ago
$ chromium
! NetworkManager auto restarted.
# sysetmctl status NetworkManager
> Active: active (running) since Fri, 12 Oct 2012 12:44:13 +0800; 17min ago
After a little dig by myself, I found out the restart was called by D-Bus.
$ journalctl _SYSTEMD_UNIT=dbus.service -f
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
Oct 12 12:44:13 -- dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
So, my problem is, How can I stop NetworkManager permanently?, so that I can use both netcfg and NetworkManager side by side, but I don't want to disable NetworkManager at system boot.
Thanks for any help.
Last edited by GutenYe (2012-10-13 00:59:23)

I finally found same issue and solution at https://bugzilla.redhat.com/show_bug.cgi?id=815243
If you want to disable NetworkManager auto-restart feature, follow bellow
# cp /usr/lib/systemd/system/NetworkManager.service /etc/systemd/system
# vi /etc/systemd/system/NetworkManager.service
#Alias=dbus-org.freedesktop.NetworkManager.service # comment it.
# rm /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
Thanks for the helping.
Last edited by GutenYe (2012-10-13 00:59:04)

6120c auto restart after 15mins-8hrs.

Similar Messages

Maybe you are looking for