6120c lock code problem

my 6120 dont acept my lock code. i use flash box to remove  password or change it to defult code and every thing seems ok   .but  aain my phone dont acept code . this seems hardware problem . pls give me  passwrod solution map . sry for my weak english

there is no code to give you
you would need to send it to a nokia care center to be reflashed but since you have already attempted this yourself they may not help so contact your local nokia care center
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • E63 Lock Code Problem After Update

    I recently checked for a firmware update for my E63. I got excited when i found out that there was an availabla one, the 510 .21 .010 and I immediately started the update process. Everything went ok but when i switched On the phone  it asked me for the lock code after 3 or 4 seconds. I tried the default one , 12345 but it showed a code error message. I can't do excatly nothing but the weird thing is that buttons Calendar,Contacts and Mailbox work but i still can't do nothing else.The Home button does not work. It doesn't seem a normal behaviour.Could it be a bug? I read a lot of posts about this problem so this means I'm not the only one having this problem. Please help me. I really need my E63 back as it is my do-everything tool. Maybe a new firmware with this bug fixed would be best.
    Thank You in advance

    hello, you will need to contact your nearest Nokia Care with proof of purchase/ownership, for them to reset your security code.

  • !! Need help !! 5800 XM Lock code problem !!

    hello all ,
    Month ago i bought Nokia 5800Xm , next day of buying i find out problems with my handset , first of all all of my data in the memory card gets automatically deleted " don't know the reason " after that everytime when i click on messages it says cannot access memory card phone memory will be used. The main problem was that when the phone is locked then each time when i cancel the it " means cancel the lock code " there was a square dot in b/w 4 and 7 , next day i was at Nokia care and gave ma handset for check n all , they 1 of all said that it is a software issue , suddenly they say that it is a screen problem and the handset screen will be replaced . I was shocked when i hear this  , they say aftere 15 days it will be replaced , i gave ma handset to them , after 15 days yesterday they gave me ma handset . The black dot problem was solved but now whenver i cancel the lockcode , the background where lock is present sometime the screen get full black , sometime half black screen and half lock is shown , sometime full lock is shown, i again went to Nokia care they say it is the newly firmware problem " don't know if there were lying or something " . My Nokia 5800XM ver. is v31.0.008
    Plz tell me is there any other problem ?? I buyed it from Nokia , so i shout them that if there is another problem in ma handset , i need a new Nokia 5800 XM .
    Thanks
    Marshal

    What country are you in? Phones for certain countries where GPS on phones is outlawed (China I think is one) have no GPS built in, or functionality removed.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • IPhone 3G Locking Code problem

    iPhone 3G
    iOS 4.2.1 Build 8C148
    Pic at http://img38.imageshack.us/img38/8528/photolu.png
    Problem:
    I know my code and I have no problem getting into the phone.
    I just want to deactivate it but no option available (see pic).
    When entering locking code menu, it prompt me to enter my code, I do so and then I only have the option to "change the code" but not to "deactivate it".
    It seem to be a very pinpoint problem with 3G, because my other phone is a 3GS build 8C148a and it got the option available.
    Thanks for any help.

    Ok.

  • Nokia 5700 Lock Code Problems

    Hi All
    This is what I do.
    Menu - Settings - Phone Settings - General - Security - Phone and Sim - Lock Code
    When I select Lock Code it asks me to enter the Lock Code so I enter ANY number over 5 digits, it asks for a new lock code so I enter 67890 (5 digits), Asks to verify so I re-enter it correctly and I get a code error.
    If I repeat this process 5 times it says I've entered the Lock code incorrectly and can't do it again for 5 minutes.
    It also asks for this code when I attempt to reset the phone to which I enter 12345 and it errors, plus it asks for the lock code when I try to set up a timed phone lock.
    If I enter any 4 digit code it just asks for Lock Code again.
    Any assistance would be appreciated.
    Thanks
    TopesMessage Edited by topes on 05-Sep-200703:11 PM
    Nokia 5700 XpressMusic
    Vodafone NZ Subscriber

    I too attempted to take it to a Nokia Service Centre, who reflashed it but to no avail.
    I then took it to an independant mobile repair centre and he was able to resolve the problem.
    He advised that the lock code had been changed and they were able to read it (giving me the old code which I didn't recognise) and then resetting it to 0000.
    I would have thought the NSC reflash would have resolved this.
    Cheers
    Topes
    Nokia 5700 XpressMusic
    Vodafone NZ Subscriber

  • N85 v30 Lock code problem !!

    I've got a problem, !!!!!!!!!!!!!!!!!!
    I updated the software to v30 and my lock code is lost !!
    It used to be 32159 and when i tried it it didn't work so i tried the defult 12345 which didn't work too !!
     I noticed something else: The phone was set to lock automatically after 20 min and now it doesnt do so !!
    Has anyone got tthe same problem or is only my device ?

    Try to hard format your phone.if the problem not solved, take it to NOKIA care service.
    you can hard format your phone as following:
    switch off your phone.
    press and hold "Green key" And  "*" and  "3" and as you are holding those keys switch on your phone.
    Nokia N79 4GB
    SW Version: 32.001 RM-348 MEA

  • Lock code problem aftr updating

    I have updated my e63 to 510.21.010 now its asking me d lock code while I switch on the phone. I wanna get completely get rid of this problem. Plse somebody help.

    The default Nokia lock code is 12345 unless you have changed it yourself and forgotten it. If that's the case then you will have to visit a Nokia Care point to get it reset.
     If the phone is asking for the SIM PIN then check with your SIM provider for the default PIN. If you have changed that one as well and have forgotten it then you can enter the wrong code until the SIM gets locked and unlock it with the PUK supplied with the SIM. This will reset the SIM PIN and you can enter a new PIN for that.
    Ray. 

  • Lock code problem with last firmware of 5800 (v20....

    hi everybody
    what is the new lock code or the solution for this problem?
    Message Edited by elhardudi on 10-Feb-2009 12:17 AM
    Solved!
    Go to Solution.

    Unfortunately the only known solution at the moment is to take your phone to a nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • E66 Lock Code Problem

    I have E66 mobile i wants to format my phone but at the time of code i am entering default code 12345 but its not working even i not changed my code. Can some one help me how can i again reset my code so that i can access my mobile
    Thanks

    The default unlock for most Nokia phones is 12345 unless you have changed it. Normally this code can only be reset by the Nokia Care Points. However some of the latest S60 models can be reset to the default code by reformatting the phone.
    There have been cases of this code being changed by certain networks. When this is the case, the security code will be on the label on the box, close to the IMEI (International Mobile Equipment Identifier) number. This number will be a 5 digit number but not necessarily marked as a security code.
    Some S40 5th edition phones, such as the 6500 Slide or 6301, don't always have a preset lock code. In these cases, you will be prompted to create the code the first time you try to perform an action that needs one (such as clearing logs or restoring factory settings). You can also create the code from the Settings>Security>Access Codes menu.

  • Nokia n96 lock code problem

    I forget my master reset code so can't reset my nokia n96 & also can't use any mamory card.Whn i put in any mamory card thn phone asking for  lock code but i 4get tht...I updte my firmware but still its not fixed...So plz some1 help me...Thnx

    If you have changed the code from the standard 12345 then there isn't a way to recover the code.
    You could try the hard reset (hold down the *, 3 and green keys whilst the phone is switched on until at least the handshake logo), or have the phone flashed at a Nokia service point. Either way, the phone will be completely wiped so you need to back up important data like contacts and messages first.

  • E52 - problem with lock code and bluetooth connect...

    I have an E52 as my work phone, and due to company security policy, a lock code and autolock (30 minutes max) is mandatory. This is giving me problems when using bluetooth headsets, regardless of the make (Plantronics, my Garmin GPS, and latest the built in Fiscon in my car). As long as the phone is not locked, everything works fine, I can make and receive calls. But, when the phone locks, I am no longer able to make calls. In the car (both on the GPS, and on the built in connection) I can still browse the phone book and select a number, but when I attempt to dial, nothing happens.
    If I enter my lock code, I can make calls without problems. However, it sort of defies the purpose of having a rather expensive hands free kit in my car, if I can only make calls the first 30 minutes of my ride.
    Is this a known problem, and is there a solution?

    This is not a problem as such, more of a design flaw.  It is not possible to make a call when the phone is locked, I guess the only way around the issue is just to press a button on the phone every now and then.  Say every 15 to 20 mins just push the menu button or any button randomly, that should reset the timer back to 30 minutes until it is locked next.
    Hope this helps.
    Everything should be made as simple as possible, but not simpler.
    Nokia E7-00
    Click the white star if you think I helped you please

  • Problems knwoing my phone lock code, after updatin...

    hi i just recently updated my nokia 6220 classic firmware to version 5.15 successfully, but now i can't seem to be able to know my phone lock code. It must of changed with the software update to maybe perhaps a default one ?? can someone please help me, thanks
    Solved!
    Go to Solution.

    sorry solved the problem, phone lock code was reset to 12345  

  • Problem With my E72 with invalid lock code

    Hi,
    I just configured a new exchange mail account. Prior to that I have configured a my previous firm mail exchange. I forgot the passcode. After setting up new account it asked for the lock code and i tried many time which reulted in data loss. I lost all my data in the phone and also I am not able to access my memory card. When I tried to connect to the phone via USB to my laptop(mass storage), to my surprise its is forcing me to format my data card in the phone.
    Can some one guide me if there is any possibility to access my data on the memory card?
    Thanks in advance!

    Click the link below choose your country then choose service and see if you have an Apple Authorised Service Provider in your country.
    https://locate.apple.com/au/en/
    If you dont have any Apple Authorised Service Providers near you either then contact AppleCare and ask them for options for postage in your country/region. You can find the number for your country below:
    http://support.apple.com/kb/HE57
    Hope this helps

  • System lock pin code problem

    So basically i have lost my macbook pro. And then i found it yesterday and arrested the thief who stoke my macbook with using find my iphone app. And right nownim confused how to make the system lock code pin appeared. Because the thief  had done something to my laptop ( so after my mac was taken by the thief. I immediately lock my mac using find my iphone app) and right now i dont know how to enter my pin code system because the system pin code doesnt come up after i turn on my mac. Please help me because all of my datas r there

    If the system PIN code doesn't appear, it looks like the Mac wasn't connected to Internet after getting your Mac locked. Simply turn it on, open System Preferences > iCloud, log in with your Apple ID (if it's logged in with another Apple ID, choose "Sign Out") and mark "Find my Mac". Your Mac should be locked automatically, so just type the PIN code and it will be unlocked.

  • Lock Code when turn on - 5800XM

    When I had v40 I had to tenter the Lock Code when I turned the phone on (something I did rarely so no problem).
    When I updated to v50 it doesn't ask for the Lock Code now. Any one know how I can set this to happen please?
    Mark

    I tried to paste something from the extended user manual, but it looked weird on the screen, so I've tried to make it look sensible.  I hope the following does the job:
    Select Menu > Settings and Phone > Phone mgmt. > Phone and SIM card. PIN code request — When active, the code is requested
    each time the device is switched on.

Maybe you are looking for

  • Goods Issue after STO warning "Price change of  % in month / for mater"

    Dear all, This is my process for Inter-co plant stock transfer: 1. Create STO via ME21N 2. Raise Goods Issue from source plant via MIGO_GI 3. I get this warning message "Price change of  % in month / for mater", details as below: Price change of  % i

  • Dynamic SELECT conditions in background - problem

    Hello, I faced a strange problem. I have function module which uses dynamic conditions in SELECT statement. Everything works fine in foreground processing, but in background the function gives no values. You can find a piece of code below. It's a bit

  • Column to Table link

    Hi, I have a question about what seems to be a little oversight within the HTMLDB product. Having said that I hope it something I have missed rather then an oversight. We keep data in tables on buildings, floors, components etc. Over this table struc

  • How to define an itab based from a structure inside a class

    Hello Experts, How can I define an internal table based from a structure that is declared inside a class?I want to define it in the START-OF-SELECTION event. I'll create a scenario below: *       CLASS lcl_main DEFINITION CLASS lcl_main DEFINITION AB

  • Clearing Thru F.13

    Hi Gurus, While clearing through F.13, we use a variant which automatically takes current date as clearing date. So For eg. when we do clearing on 3rd March, system takes its impact in period 2. But we want when we do clearing on 5th either system ta