6120c speaker noise problem

I have puchased Nokia 6120c a month before. It work fine up to my requirement and expectation.
Since last some days, it created noise in the front size speaker and sometimes mutes while listening to some caller. But when I make the volume down, it works fine.
I will be grateful if you please guide me how can be get rid of this inconvenience of speaker noise problem, and suggest me the solution.

Which HD do you have?
1. There is a constant noise from it and by
monitoring the fan sensors it have concluded that
they are not to blame. Altough it sounds like a fan
that is constantly on because it sounds like air
flowing inside the computer. As far as i can tell the
noise seems to be most apparent under the trackpad.
This noise is on from the moment i turn on the
machine until i shut.
It might just be the sound of the hard drive spinning. They don't appear to ever spin down. Especially the 7200 one like I have.
2. I belive or am imagining to my self that the
harddrive is becoming louder when writing/reading
activity.
It not just your imagination runnin away with you. On occasions mine makes some clicks, etc. when reading or writing.
So from these two issues i tought it migh have been
the harddrive that had some fault on it, but i cant
seem to find any, the S.M.A.R.T. status is verified
and there is never any sounds which might suggest bad
sectors on it.
I think it just may be "normal" for these drives.
3. Every 2-3 secconds there is a faint noise from the
PowerBook and i belive that this might have something
to do with the Power as when it is not pluged into
the mains there is no sound. It sounds like a very
quite heartbeat monitor.
No clue what that is.

Similar Messages

I have Problem in my Iphone 5 when I raise the sound of the speaker noise and the sound not clear

I have Problem in my Iphone 5 when I raise the sound of the speaker noise and the sound not clear.

Could you please post in your native language, as your issue is not very clear. Thank you.

Flex 2-14 speaker noise, driver problem ?

hi all,
recently bought flex-2 14 then noticed that the speaker is making noise like hisss, or static noise,
that happen when playing sound, even when the speaker is set to mute or plugging in a headphone,
after the sound had played, the noise gone. the noise came back again when playing another sound,
the noise can be heard clearly when the speakers in line/ parallel with the ears,
what really bothers me is when I mute the speaker/ plug a headphone, the noise is there,
already tried newest driver from realtek, but no luck.
spec :
OS Name   Microsoft Windows 8.1 Single Language
Version   6.3.9600 Build 9600
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Manufacturer   LENOVO
System Model   20404
System Type   x64-based PC
System SKU   LENOVO_MT_20404_BU_idea_FM_Lenovo Flex 2-14
Processor   Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 2401 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date   LENOVO A0CN27WW, 29/07/2014
SMBIOS Version   2.7
Embedded Controller Version   1.20
[edit: added current sound device info]
Name   Realtek High Definition Audio
Manufacturer   Realtek
Status   OK
PNP Device ID   HDAUDIO\FUNC_01&VEN_10EC&DEV_0233&SUBSYS_17AA3817&REV_1000\4&157DCDAD&0&0001
Driver   c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.7188, 3,70 MB (3.882.456 bytes), 23/03/2015 9:22)
Name   NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
Manufacturer   NVIDIA
Status   OK
PNP Device ID   ROOT\UNNAMED_DEVICE\0000
Driver   c:\windows\system32\drivers\nvvad64v.sys (1.2.27.0, 37,14 KB (38.032 bytes), 07/03/2015 12:28)

No proper fix. Workaround is to uninstall the Realtek driver and use the generic Windows driver.
https://forums.lenovo.com/t5/Lenovo-Edge-Yoga-Flex-Laptops/Yoga-2-Pro-Static-Noise-in-Headphone-Jack...
https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-speaker-noise/m-p/1339883
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W540-Speaker-hissing-sound/td-p/1426495
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Static-using-headphones-on-Y40/td-p/1792343
https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440-electric-sparks-sounds/m-p/1799439
https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Static-like-sound-coming-from-audio-jack-w...
https://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W550s-speaker-sounds/td-p/2055752
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

First Whine or speaker noise?

My MBP week 11 is now almost two month old. No noise no problems except battery exchange and some heat. While processing a movie with toast a very loud noise started from the middle of the key board. Sounded like a jet taking off. Shut down the machine and when I restarted the noise was still there but very quiet and lasted about one minute and then when away and has not retrun.
DOES THIS SOUND LIKE THE FAMOUS WHINE OR A SPEAKER NOISE?
Thanks
Grump

Its not the whine, that only occurs when the
processor is idling, and from what I can make out,
the processor would certainly not be idling with what
you were doing! It wont be the speaker noise, because
the speakers are located in the grills at both sides
of the keyboard, not underneath it. The noise you are
describing is probably just the fans running at full
capacity to cool your macbook pro down during some
particularly processor intensive work, and as such
nothing to worry about.
Thanks for the reply. The machine has been very quiet except this one time
Hope thats the last ime. Again thanks!
Grump

Strange noise problem with music layer after replacing the music file using script in CS6

Hey guys,
I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
Does anyone know what's going on here?
I'm using After Effects CS6 windows Server 2008 64bit.
Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Myleniu,
Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
I'm starting to think that win server might be the problem.

After I updated the latest iso 6.0.1 my speaker is problem

After I updated the latest iso 6.0.1 my speaker is problem.
Only the upper one and all the rest is working good ( loud speaker and headset).
Just only the one I put on the ear.
Please help !!!!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Noise problem when I look at pictures in full size (or smaller) on monitor. If I enlarge pictures the noise is gone. ??? Can somebody help? Thank you

I have a noise problem when I look at pictures in full size (or smaller) on monitor. If I enlarge pictures the noise is gone. ??? Can somebody help? Thank you

How useful screenshots might be in illustrating an issue pertaining to the screen display in comparison to a merely verbal description!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
What are your Performance Preferences?
Please read these and proceed accordingly:
Best practices: Usage | Adobe Community
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Digital Noise Problem on AA 1.5

Adobe Audition 1.5
Lately I have noticed that just by opening a track within Adobe Audition, that process "creates" or embeds digital noise within the song.
I have tested this problem a few times by listening to the song before opening it within Audition. Beforehand, the song plays without digital noise, and after it has been opened within Audition, the noise appears. This digital noise is hard to describe, it's short in length of time, about 1-2 seconds, and will appear at least once within whatever song is being tested.
I uninstalled and reinstalled Audition to see if this would solve the problem, but to my surprise, the exact same digital noise problem remained within the reinstalled version of program. In the past, AA 1.5 has worked okay without this problem.
It's also worth noting that when I reinstalled the program, I successfully entered my program key, and I am "not" running the program in demonstration mode.
I am planning on upgrading to Adobe Audition 3, but the upgrade uses a previous version as a platform on which to upgrade to version 3.
The concern is that this digital noise will "survive" in version 3 of the program.
Thanks for any tips or ways to eliminate the digital noise (besides reinstalling the program), even within Adobe Audition 1.5 for the time being.

The brief digital noise "replaces" or interrupts the song and does not mix together with it.
I have been saving the songs in .wav format.
I operate AA in virtual mode on Windows XP within a Mac computer, and now I have also discovered the same
digital noise on another sound program within a song on the Mac side.
I appreciate that this isn't a Mac forum, but I found a bulletin from Apple about noise issues with my current G5 computer:
http://support.apple.com/kb/TS2033?viewlocale=en_US
Perhaps this is good timing as I am preparing to buy a new Mac Pro, and this one has an Intel processor so I'll be
able to run Windows and Adobe Audition natively.
Thanks to all for the insightful comments and help.

Noise Problems at 100 iso

Hey im a rookie working editing a music video i shot.
From what I was taught about noise. It comes from high iso and underexposed images.
I shot in bright day light at 100 iso and footage has noise problems.
Heres the link to the vid im editing. Its at 17secs(look at the black jacket) and all the way thru.
http://www.youtube.com/watch?v=DJoRdqyE-70
Canon t4i with kit lens. 24fps, 50 shutter speed, Lightform c picture style

That's what I call "codec noise", sadly a known and hard (if possible) to avoid issue with canon VDSLR. Things that might help :
- using an on camera "flat" color profile like flaat10.
- lowering contrast, saturation and sharpening on this profile (the guy behing flaat10 provide good guidelines for his profiles).
- disabling every picture processing options like "highlight priority".
- staying away from the exposure zone were the issue is most visible, ie better plan your lighting and exposure. Being outdoor with a nice sun at 100 iso won't matter if you're shooting people standing in a shadow area with dark clothes. Keep in mind that with this kind of camera you have a very limited dynamic range to work with. Shadow + sunlight will give you nothing but overexposed highlights and muddy shadows.
- not doing the post work in native H264 but rather transcode to something like DNxHD or ProRes (that was usefull with FCP7 and Color, I have no idea how Premiere handle this, never tested and probably never will).
- not letting this drive you crazy. It's quite hard to see in your video and I probably only saw it because I knew what you were talking about before I even watched the video. It is highly improbable that most viewer will notice it.

Noise problem

I got my MacBookPro end of April. For some time now I have a noise problem which is very annoying. At first I thought it is only in my imagination until it severely intefered with my concentration and even my well-being. It is a high frequency noise which stops when I close the display. The noise seems to go up and down with the screen brightness. After reading through the discussion threads and finding information on the whining-noise - which seems to be a well known issue - I experimented with blowing into the areas where the fans are located and.....surprise, surprise the high frequency noise seems to be gone for the moment. Had anybody similar experiences??? and what would you recommend.

I got my MacBookPro end of April. For some time now I
have a noise problem which is very annoying. At first
I thought it is only in my imagination until it
severely intefered with my concentration and even my
well-being.
Let's not get overly dramatic... noise affecting your well being? Research will show that if it is truly affecting your well being you fall within the 8% of people that may develop depression, anxiety, or another psychological disorder from everyday stimuli. If you are not being overly dramatic, I would suggest seeing a psychiatrist... seriously, I'm not being a jerk.
It is a high frequency noise which stops
when I close the display. The noise seems to go up
and down with the screen brightness. After reading
through the discussion threads and finding
information on the whining-noise - which seems to be
a well known issue - I experimented with blowing into
the areas where the fans are located
and.....surprise, surprise the high frequency noise
seems to be gone for the moment. Had anybody similar
experiences??? and what would you recommend.
This is a known problem, some call it the "Screen Inverter Whine". Faulty screen inverters were present in many of the MBPs released between January 2006 and roughly June 2006.
The solution to the problem is having AppleCare replace your screen inverter.
Call Apple Care and describe your problem. They will handle it by shipping you a box to send to a repair center. Your computer should be out of your hands roughly 3-5 business days depending on shipping times.
Good Luck.

Is it common for imac 20" isight to have noise problems?

Hi there,
I ordered imac 20" isight and currently waiting for delivery. I am getting woried over these "buzzing noise" and other noise problems reported over and over again here on these boards. Can more experienced users of these boards, apple insiders and anyone else give me your opinion:
Is it common for imac 20" isight to have noise problems?
I am really considering to get 17" if there is any real information it is considerably more quiet.
Thank you in advance.

We have a new 17" and 20"
The 17" is virtually silent, the 20" there is some fan noise.
I find it annoying, although it is 100% quieter than my old PowerMac, which I got used to!

Has anyone had a problem with no ear-speaker noise when making calls on iPhone 5? Usually work after first call

So I got my iPhone. Had problems with the screen and took it back for a stock replacement. The replacement I noticed about two weeks later that when I make calls, 80% of the calls wouldn't make a noise. I would then look at the screen and see its been answered and the seconds are counting away. I'd hang up and try again which would always work.
I've tried a restore. Twice in facts.
Has anyone else had this problem? I'm running the up to date software but think it could be a hardware problem.

Thank you so much. You have solved my problem. I never thought to click the down arrow. In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button. This one never did. I don't understand why Adobe support never told me about that when I called them.

IPod causes PC speaker noise

Brand new 5 gen. When I connect the iPod to my PC, the iPod's hard drive causes a high pitched noise on my PC speakers. As the hard drive spins up, the pitch goes higher, as it spins down, the pitch goes lower. You get the idea. The volume isn't particularly loud, but it is certainly noticable.
Adjusting the volume via the Windows Volume control or the iTunes volume control does not have any effect. I have to physically turn down the speaker volume knob on the speakers themselves to turn it down.
How can I get this to go away? Any ideas?

OK
Solved the problem....I noticed that the ipod was appearing in the device manager but was not being initialised in IPOD updater or Itunes.
Searched knowledge base for similar ....
"iPod shows up in Windows but not in iTunes"
and basically followed the instructions...all is now up to date and working as before....phew..!
took me a while to get there though...hope this is of some help to others
regards
George
Windows XP

Harman Kardon BT noise problem.

i need to know if my HARKAR BT headphones have a problem. 1 or 2 second right after playing any sound or music in the headphones in wireless mode you can hear an audible noise of interference in the right speaker. I want to know if this is a known and general problem in bluethooth headphones, and if anyone have the same issue.
Thanks!

Nelshen wrote:
My Harman Kardon BT Headphones keep cutting out intermittently. I found that the music would stop streaming to the headphone but it would continue playing on the phone. To get the music back I had to keep pressing the play button on both my iphone and headphone and it would eventually come back. Is it an issue with the 5 or is it my new headphones?
Had issues too. RESET my Jawbone Icon per online PDF and removed from iPhone and re paired no problem now.

6120c speaker noise problem

Similar Messages

Maybe you are looking for