6131 Add New language Not Listed After SW upgrade ...

Hello Every body,
I flashed my 6131 from Version V3.70 to V5.50. Everything Seems to be fine but Greek Language is not listed.
Greek Language was supported by previous firmware.
Any possible solutions ?
Thnask you in advance

Hello Ivotsis,
everything depends on product code of your Nokia 6131. You find this code under the battery. For example my product code is 0532273.
Sometimes happens, that the phone you bought probably in Greece is originally designed for other country and your language pack was flashed into your phone later by the reseller.
In this situation, if you use Nokia Software Updater it downloads firmware with language pack according to your phone's product code, where greek language is missing.
In other forum here is possible to check the product code of your phone against the language you need (before flashing the firmware) to know, if your language after flashing will be available or not.
In your situation is necessary, I'm afraid, to visit Nokia service center with request to flash firmware again with correct (greek) language pack. It may cost some money.
Best regards,
Tomas

Similar Messages

  • PDF in Japanese language not appearing after SAP upgrade

    Hi,
    When a P.O. is generated and when user clicks on Print Preview a PDF file will be generated and sent to the Vendor in Japanese Language, It was working fine now some SAP upgrades has  been done last week, Now nothing appears in the PDF P.O. generated, So please let me know what went wrong and is there a seperate package for Japanese language or how to go about this.
    Points assured.
    Regards,
    Prabhu

    Please help me.....
    Points assured
    regards,
    Prabhu

  • Configured new language not displayed in user profile Language options

    Hi all,
    I have a requirement to add new language in portal. In that I have configured the language u201Chindiu201D in portal content translation.Now i want to configure  language options in userprofile.
    These are the procedures I have followed
    1 .On the file server navigate to
    <Installation-drive>:usrsap<SID><Instance_ID>SDM
    ootoriginsap.com com.sap.security.core.adminSAP AG<version_number>com.sap.security.core.admin.630.ear
    From here extract the com.sap.security.core.useradmin.war.
    2.In com.sap.security.core.useradmin.war file and add u201C hi = Hindi u201C in Language_en.properties
    3.Create a copy of Language_en.properties, and save as Language_hi.properties at any location.
    Now we have to do some changes with the help of configtool.bat
    So start the tool by executing.
    <SAPJ2EEEngine_installation>j2eeconfigtoolconfigtool.bat>
    Now Switch to configure mode.
    In the Tree navigate to cluster_data>>persistant>>com.sap.security.core.ume.services.
    Now switch between view and edit mode and choose yes.
    4.By right clicking on com.security.core.ume.service create a Sub node. And choose
    File-entry and upload the language_hi.properties that you have created in previous step.
    5.Create and Close the Window. And just restart all cluster nodes
                            After the above configuration, the language u201Chindiu201D is added and I can able to see the language  in self registration Language options.but it is not displayed in userprofile language options.
                            how to configure this Please help  me.            
                        These are the threads I have referred
                          How to add Hindi language in Portal
                          Regards: Add a new language (Hindi} In portal
                          How to add new language in portal
    Regards
    Bala

    Dear Markus,
    1.)  import done in SMLT
    2.)  support package parts of the languages imported
    3.)  language substituted
    4.) client refill done
    I have done 1 & 2 and also client maintenance.
    I'm not sure what are 3 & 4. Can elaborate further ?
    Thanks.
    Regards,
    Kent

  • Add new language keys

    Guys,
    I need to add a new language key in CRM 5.0. In Transaction BP when we select languages, how do we add new languages to the list?
    Ani

    Individual languages cannot be added by a phone owner/user.
    A specific/select set/combination of languages is put on devices intended for specific regions/countries.
    This means that all possible combinations of languages that individual people might wish to see do not exist (such software packages, firmware, has not been created by Nokia).
    And the only proper way of getting whatever languages are available, is to buy a device intended for the region/country where those languages are available.

  • Is it possible to add new language in General Setting?

    Hi all,
    I would like to add new language ("Cambodia[Khmer]") in General Setting in SAP and when i select that language, the system auto translate to khmer.
    Is it possible to do that? if yes, can u tell me how to do?
    Thanks
    TONY

    Hi Soeun,
    You need to have S-User Id and password to open the link, Edy suggested. Still, I am sharing the Note with you:
    Symptom
    SAP Business One is currently available in 27 languages. While SAP may continue to increase the number of supported languages over time, it is not feasible to satisfy all possible demands.
    Solution
    The SAP Business One strategy is to empower its partners to take responsibility for the translation of the user interface (UI) into other languages, as needed.
    To support this process we have added a new tool to the Installation and Upgrade package.
    The Custom Language Tool (CLT) file 'CLT.zip' is located in the folder 'Packages' in the Installation or Upgrade packages.
    It enables partners to:
    Define an additional UI language
    Generate a UI string source file to be translated into the new target language
    Upload the UI string target file in the new language to SAP Business One
    Make the new language available to SAP Business One users
    For more information, see the 'User Guide - Custom Language Tool.pdf' contained in the package.
    Thanks & Regards
    Ankit Chauhan

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • The Connection Server does not start after an upgrade to BO4.1 SP3

    Hello guys,
    The Connection Server does not start after an upgrade to BO4.1 SP3
    We are in process to upgrade our Business Objects environments to BO4.1 SP3
    The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    Our OS is AIX
    Uncaught Exception in SilentScope: [CS] Ser
    verInitialization::InitManager::Initialize: 0.007^^
    The CS initialization failed within the CS server. Aborting
    trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
    Gerd

    Hi Amine
    The File seems ok
    File from the failing connection server
    -rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
    File from our test system
    -rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
    I created a new connectieserver(by the copy function), but the new server won't start.
    Regards
    Gerd
    Log
    |89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
    init_srv.cpp:95:-: TraceLog message 3
    |4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
    |77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

  • All my Notes disappeared after ICloud upgrade

    All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups?  Any ideas? This is a BIG hiccup!

    I posted this on another discussion:
    Similar problem:  I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
    They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
    Any suggestions about how to recover the notes lost today? Thanks in advance.

  • HT6154 Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s

    Hi All,
    Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s
    Thanks and Regards,
    Raghul

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

Maybe you are looking for

  • Internal HD (aluminium PWB) refuses to be erased.

    Erasing the original internal HD on a aluminium PWB does not work. I friend of mine had a big crash on a aluminium PWB and was no longer able to access the machine. It would get as far as initializing network and than we would get the awful grey rest

  • WebLogic 8.1 SP4 throws exception on empty markupString/

    I'm not sure, but seems that WLW 8.1 SP4 doesn't like empty <markupString/> in markupResponse. soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/X

  • IChess 3D on a MBP 2011 early

    Hello community i am a bit convern about iChess 3d  when i start playing chess the fans on my macbook pro go max at 6200rpm, can some one please tell me if has the same issue with iChess 3D on their MBP's ?

  • Editable forms in Hebrew become empty on Windows XP

    We have a PDF with editbale forms in Hebrew which should be used on WindowsXP. The problem is that after installing the extended language support, the forms look empty and the typing in them in not seen! If we remove the extended support for the Hebr

  • Why does iphoto keep quitting unexpectedly?

    Using a MacBook Pro, 2.4 GHz Intel Core i5, memory: 4 GB 1333 MHz DDR3. OS X Lion 10.7.5 (11G63). Every time I drop a photo into iPhoto today, the program "quit[s] unexpectedly." I have a copy of the problem report if needed.