6131 - Keypad inoperative, cannot enter PIN code

After stopping an alarm on my 6131 I noticed a couple of minutes later that there was a flashing alarm indication on the screen. I tried to clear this alarm with the keypad but the keypad was frozen. I turned off the phone and on turning it back on the keypad is inoperative and I cannot enter the PIN code.
Any help appreciated.

Hi Iwonami,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues with a SIM PIN on your cellular-enabled iPad, you may find the following article helpful:
iOS: Understanding the SIM PIN
Regards,
- Brenden

Similar Messages

The phone does not lock up when entering PIN code

This morning my Z1 Compact wanted me to enter the PIN code: I did so but the only thing that happened was that the text "Enter PIN code" disappeared. But I was still at the same page. It seems to have stuck or freezed. Tried to remove and reset the SIM card, called the operator who says there´s nothing wrong with the SIM card. tried to force restart with and without the SIM card. I can't get pass that starting page.
The funny thing is that on the "mssage board" or whatever it is called at the top of the phone is updating when I got a message, mail, updates etc. But I can not scroll down and see them in detail.

You may want to consider running a software repair
Fully switch off your phone and make sure it is disconnected from your Pc then start PC Compannion and select Support zone then Update my phone/tablet then in Blue select Repair my phone /tablet and follow the onscreen instructions and when prompted making sure your phone is still switched off hold Volume down and connect your USB cable which should enter your phone into flashmode and start the repair process
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

How to customize SAPlogon so that the user cannot enter transaction code?

I use PFCG to create a role which limit the choices of menu. I create a user and set the role to the user.
I would like to disable or hide the COmmand Field so that the user cannot enter transaction code directly.
Is it possible to do so?
If yes, would anyone show me how?
Any discussion is welcome.

anyway you are going to restrict the user authorization vai role, insted of going throught the whole tree to execute the tcode there is shotcut as command line. here you can save much more time for the user insted going through the tree always. there is no harm for the system if you keep the command line option. What and why you think it should be disabled?
Cheers,
-Sunil

HT4623 cannot enter access code letters .the touch pad only shows numbers

cannot enter letters in viber access the touch pad only shows numbers

Hello,
I have the exact same problem now. I setup Lotus Traveler and enabled my code lock. When I entered the default code 12345, it asks for a new code with numbers and letters but I only have numbers available to choose on the keypad. So I am locked out and have had to go back to my old phone. There are no other options on the keypad.
Did you find a solution?

IOS7 setup: Can't enter PIN code

I had a black-screen issue with my iPhone 4s, and had to reset it. After the reset was done, I got my phone to start up the setup-process (just like when you geet a brand new phone), but i accidently hit the pass button once the "enter SIM"-dialogue popped up. Now I can't enter the SIM's PIN code anywhere, and my phone is useless. I can't enter it on the phone, nor iTunes. What can I do?
I already tried the following:
Restarting the phone
Forcing restart by holding the 2 buttons
Restarting the process
Calling a number (I can't because the sim is not unlocked)
Ejecting the sim card
Connecting to iTunes (on 2 seperate computers)
Any ideas?

These are your choices: 1. Get a new sim, without a sim pin; 2. Remove your sim, insert in another phone & remove the sim pin, then re-insert in your phone.

My I pad states disabled and is frozen and cannot enter access code?

My I Pad stateds dusabled and is frozen. I have powered off and everything, but, still frozen and cannot enter my access code.

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

Keypad Lock without enter Security Code

Dear all,
Is there anyway to lock the phone keypad without having to enter Security Code?
Thanks,
Arie Sasongko

Or leftmost navigation key + '*' (depending on which phone is in question).
However, if the question was about automatic/timed locking of the keypad, then some phones (in particular the S60 based phones), only have built-in support for so that the security code needs to be entered.
For those phones a workaround is installing utilities like these:
http://my-symbian.com/7650/applications/applications.php?fldAuto=826&faq=2
http://my-symbian.com/7650/applications/applications.php?fldAuto=650&faq=2
The S60 based Nokia models:
http://forum.nokia.com/main/0,,150,00.html?matrixType=s60

Cannot enter unlock code - problem entering '#' ke...

While entering unlock code, I can't enter last symbol "#" key on nokia 1280.
Please help.

@Datuna
Just a thought, you are using repeated presses of "*" key for pw+ with details of timing involved here? http://www.lur.nu/unlock/how_to_enter_codes.php
Happy to have helped forum with a Support Ratio = 42.5

I cannot enter verification codes in safari anymore

When I try to enter a verfication code then it is always rejected (see picutre). When I open Firefox it works without a problem.
I rather want to keep using Safari :-) Thanks for the help!

Hi Marc, the adobe plugin has nothing to do with it (this is in the Library/InternetPlugins folder by the way), even with Adobe installed, I always advise to delete the Adobe plugins, the Preview plugins -default- do it very good.
Could be an extension in safari, as Carolyn said, but you do not have any.
In Safari Preferences/Security the "Java Script" must be activated (never uncheck that because you need that for almost everything, it has nothing to do wit Java).
When you activate Java in Safari and it does not work, Go into SystemPreferences and click the Java Applet and in the Security Tab you must activate it there too!
But: I never have to activate Java to put in the code... I have Java disabled almost always, it is only in one particular Banking Application that needs it.
Disable Java (not javascript), Quit Safari (from the menu). Then restart the machine. Try again.

ICloud and Pin Code (Mac Mini)

Hi there,
I have some problem. I have Mac Mini 2010. Now my Mac Mini is blocked...(((
Was so -
I blocked my Mac Mini himself, when i used Icloud - (Find My Iphone-Select My Mac Mini and Remote Lock)
After it - my Mac Mini is rebooted and now is not work - "Please enter Pin code"
But i can't remember my pin code.
How i can recover my Pin Code?
Please help me!
Hope to hear from you soon.
Regards,
Grigory

When you blocked your mini via Find My iPhone, the only way to get it up again is to enter the code. If you don't have the code, then reisntall OSX as a new machine and later restore from your Time Machine backup. Without the backup, you can only start from scratch with a fresh install of OSX. You'll lose all your personal files though.

Blackberry is stuck at the PIN code entry screen

My blackberry has been stuck at the PIN code entry screen for two days now. It says enter PIN code but no matter how many keys I press, it won't type anything. There is a picture of a locked lock at the right hand corner of the screen. Also it ays 123 at the top right hand side.
I've tried everything. Resetting the phone, taking the battery out for a few minutes, even taking the SIM card out.
Please help!!!

this sounds like your keyboard has gone bad.
Try connecting your 8520 with your PC and running the BlackBerry Desktop software.
You should be asked to enter the same PIN code on the PC, using the PC keyboard... does that work?
If so, I'd advise doing a backup ASAP should it be the handheld device keyboard going bad. Thsis can be caused by moisture issues, left on a bathroom counter during a hot steamy shower, kitchen, gym locker, sweaty face, etc.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Enter your system lock pin code to unlock this mac

I just traded my Macbook Pro for a 27" Core i5 iMac. I wiped the iMac when I traded and I brought it home to do a full reinstall. I booted holding the Option key down and noticed this iMac had a recovery partition I opted to use the recovery partition to reinstall. To my surprise it was Lion. And the cd was snow leapord. I was cool with that and signed in and used the computer all day. Then sometime while I was sleeping a obnixious alarm went off on the iMac and there was a box to enter your system lock pin code to unlock this mac.
Priding myself on doing all repairs on my own since my primary job is reinstalled and virus removal. Long story short I could not access anything no matter what I tried. I ended up calling apple care and asking what needed to be done they explained I needed to bring it to a apple authorized store and they would have to unlock the firmware.
Do you guys know what they are talking about or is there anything I can do before driving 100 miles to my nearest apple store. I find this rediculous.

I did indeed did wipe the system clean at the owners house, I went home with what I thought was totally clean hard drive, there was a recovery partition I did not see until I got home. This recovery partition was indeed tied to the original owner which I did not know at the time. I assumed it was like any old windows recovery and it was clean and made reinstalls a dream. Well long story short I had the snow leapord cd in the drive and ready to go until I seen this recovery partition and I opted to use the **** recovery and I reinstalled registered and signed into everything and used the computer all day 12 hours probably. By the way the recovery partition that was tied to this guy was lion.
So then I left the computer on and went to sleep. Late last night an alarm went off and that is when I saw the enter the pin to unlock this mac. I have tried holding the C when I boot up, I have tried holding the Option key when booting up. I have tried resetting the pram. Nothing can be done. I can get to another lock screen by phsically unplugging the power cord then booting up holding the option key. That will bring me to a screen with nothing but a lock and a line that I can type some kind of admin password. Nothing I have with work. I tried, root, admin, administrator, my password I used when I set lion up. Nothing!!!!!.
At this point this machine is more or less 100% useless, the only option I can see is to bring it to a authorized apple retailer and have them fix it. I did bring it to a local apple store. And they said they could probably fix it, but I would have to pay them between 50-100 dollars. The repair guy said something about getting the info from the ram. I just laughed and left.
Anyway this is like a BIOS lock, you cannot get to terminal, cd, to any boot options, you cannot reset anything at all. It's a full lock.

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

I cannot enter the key code for updating to QuickTime Pro 7 as there is no Icon in Preferences and no Registration option in menu?

I have followed the clear instructions to enter the purchased key code for QuickTime Pro 7. There are two options offered:-
1. Go into Preferences and select the QuickTime Player icon and enter the code that way.
2. Open QuickTime Player and open up ‘registration’ and enter the key code.
For whatever reason I have neither option available to me although QuickTime player is on my system and I use it regularly. It is version 10 build (118). I have run software updates and there is no upgrade available. I have downloaded the latest version and tried to load it but this fails because the system finds a version already available. I have attempted to uninstall but whilst it moves it from the Application folder, it remains on the Mac as it is part of the system files. So I cannot use the Pro version. The iMac is a 27” Intel about a year old and has all the software updates available to me installed.
Any offers for suggestions or past experiences that can help me overcome this conundrum?

Both answers were spot on. I made the mistake yesterday of downloading the version for Leopard in my haste. I also thought the issue was related to having to uninstall the current version X.
So the moral of the episode is check the version you have and make certain you download the correct version for your system. All works now.
Thanks chaps!

How many times can you enter the wrong pin code on an iphone before it resets?

How many times can you enter the wrong pin code on an iphone before it resets itself?

Hey Robin.T,
Thanks for the question. The following article provides the answer to your question:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
iPhone is disabled
iPad is disabled
iPod touch is disabled
You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
Thanks,
Matt M.

6131 - Keypad inoperative, cannot enter PIN code

Similar Messages

Maybe you are looking for