[6136] How-to get the initial IMPS client ?

Hi, I have a Nokia 6136 which supports IMPS but with presence capability only. The chat capability has been removed by the operator but apparently, according to its support, it is possible to get the original configuration from Nokia. Is there a way to get the full IMPS client (with chat and presence capabilities) OTA ? Thanks for your help. -- kael

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

Similar Messages

How to get the initial (first) transaction

Hi, everybody.
I need to get the initial (or first) transaction, from which the current was called. Does anybody know how?
Example: Tr. FEBAN after some operations calls FB05, then in OPENFI-logic SY-TCODE = 'FB05'. How can I get 'FEBAN'.
Maybe there are some system functions?
Thanks.

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

How to get the initial state of JSF PAGE IN ORACLE ADF

Hi everybody
my Jdeveloper version is 12.1.3
I'm building my JSF pages based on a template that has a navigation pane which contains command navigation items , every one of them (command navigation items) appears as a link at runtime and calls a JSF page , I wish to get the initial state for any page when leaving it then entering such page again , and I would like to know what is the suitable place to write the code to do this task.
many thanks !

Clear the cache by adding the following to each jsf page.
<%
response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
%>

How to get the ADF Mobile Client extension

Hi all,
Please post some link in which I can download the ADF Mobile Client extension for Jdeveloper 11.1.1.4.0 directly to my local disk. I have tried going through Help --> Check for updates in Jdeveloper but my proxy does not
allow it. so the only possible option for me is to download it to my local disk and should update it. I searched for it but was unable to find the appropriate link so I got to post here. Kindly help me out in finding it please....
Thanks,
Phanindra.

Hi Timo,
Now I am more confused whether it is available or not. In the oracle site I have seen that I can develop mobile apps using trinidad components in which <trinidad-config> file can be used to define the different platforms on
which the application can be rendered. Is it true ?? When I created a mobile app I got only <trinidad-config> I didnt get <trinidad-skins> in which I can define the style sheet. There is a lot of confusion in how to proceed to
develop the application. Kindly help me on this. I need to develop a mobile app which is not only accessible in Blackberry but should also be able to get rendered on the other platforms also. Which is the best way to develop a
POC on this. Kindly help me timo.
thanks,
Phanindra.

How to get the initial name.

public class asd{
public static void main(String[] args){
asd dkd =new asd();
how to show the object's name(dkd)?

Are you trying to obtain the reference variable name is?
Here is an example:
String str = new String("God is real!"); // "str" would be the reference variable nameIf you call the toString() method you will won't get "str". You would get "God is real!". Look at my example below:
String str = new String("God is real!"); // "str" would be the reference variable name
System.out.println(str.toString());OUTPUT:
"God is real!"
If you do a to string on like this:
asd dkd = new asd();
System.out.println(dkd.toString()); The Output would look like this:
"asd@lfee6fc"
I'm not clear on what you mean by object name, but using the toString() method wouldn't be how I would get it. If you mean the Class name you could use the getClass().toString() methods to obtain the Class name. That would give you "java.lang.String" for the first example and the second ouputput would be "class asd".

How to get the ip of client that is using the server?

I am doing a FTP like system using Java. I would like to get the time and the IP of the client that want to download the files from the system. Does anyone know the method to do so?

If you're using plain sockets you may call socket's getInetAddress() or if you're using jsp / servlets you may call request.getRemoteAddr()

Where/How to get the initial set of loops

GarageBand is displaying the initial loops greyed out, and when I click one a dialogue comes up saying they're not installed. I'm given the option to Download now, later, or from disk. Since iLife came installed on my mac I have no disc. So's I select download now, and it shuffles me over to Software Update... which informs me that there are no new updates and quits itself. Attempting to re-open the dialogue in GB gives me a message saying that the download/install is underway, but there is no evidence of such.
So's... is there any way I can manually download and install these loops? Or, at the very least, remove the greyed out one from the library?
I'm suspecting that I refused this update early on or something... I've had my mac for about a year and a half but no need to use GarageBand until now.

http://www.bulletsandbones.com/GB/GBFAQ.html#noloops
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to get the initial boot log [solved]

Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Thanks.
Last edited by aclemente (2012-12-12 22:17:50)

aclemente wrote:
Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Please search the wiki: almost everything you need has already been documented...

How to get the initial amount of a posted document?

Hi guys!
Upon posting a document, the amount of a G/L Account is automatically calculated (55,000.00) . From vbsegs it will be transfered to bseg table. And the value has been changed, the amount is divided by a tax code(12% VAT) = 49,107.14. How will I get 55,000 back without manually computing it? In what table or is there a standard bapi?
Points for helpful ideas. Thanks!

Hi Maui,
If you go to table S001, you would see the details of the sales figures divided into "Gross and Net". You can also obtain some information from table VBAP.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to get the JFrame's "client rectangle"

When I run the code:
JFrame f = new JFrame();
f.setSize(640, 480);the frame has this size, but it includes the borders and the title bar.
How can I learn the thickness of the borders and the title bar - that is something calles "the client rectangle" in WinApi.

getContentPane().getSize();

Precalculation server how to get the initial "ready" status

Hi guys,
i have scheduled 50 workbooks over night in 5 minute distances. The precalculation server is one physical server with 3 registered precalc server. Multiinstance precalculation is started. And when i come in the morning i see in RSRD_Log
with red icon the message "The system searches for the next free preliminary calculation server" and also "No free precalculation servers found (' 100" and the last message "An active RFC server could not be found ". Before i went i restarted the server so the precalculation registrations should all be green and ready and in an initial state.
From 0 o clock till 7 o clock they are all red the registrations and from 8 o clock they are green again and work fine. How come?
Does a reboot not put them into initial state? Do i also have to clear the queue from RSPRECADMIN? From 50 scheduled workbooks just 10 reach their target via mail. What am i doing wrong?
Thanks and kind regards,
Murat

Hi Vikram,
there are no paralel processes defined they are all scheduled sequentially. They are 70 scheduled in 5 minute distances.
But no parallel processes. What could be the reason?
Thanks and kind regards,
Murat

How to get the user input while server is waiting for client's message

I have a server/client program (using sockets)
I used a thread to let a server always waiting for client's request, but how should I found that
there is no message pass to server from client.
public void run(){
while (true){
Socket server = serverP.accept();
ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
inMessage = (Message)inFromClient.readObject();
System.out.println("Deadlock may occurred, please enter your command: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();
The server is waiting for the inMessage that is passed from multiple clients. But if the server
received no message after some time, it will assume something is wrong (eg, there is a
deadlock), then it will ask the user to input the command to execute the method.
If I put
"System.out.println("Do you want to take Snapshot: ");
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
String command = inFromUser.readLine();"
inside the while loop, it will keep asking user to enter the input when every time the client
connect to the server. But I want to ask the user to enter the command only when the server
can't get the response from clients.
How should I do?
Please help.

Your statement:
Socket server = serverP.accept();
it will block until Server receive connect request from client.
So, what u can do is, create a seperate Thread which check if server is idle (no client connect to it) for a certain time.
public class xxxxx extends Thread {
public void run(){
   (new WatcherThread()).start()
   while (true){
   Socket server = serverP.accept();
   WatcherThread.acceptFlag();
   ObjectInputStream inFromClient = new ObjectInputStream(server.getInputStream());
   inMessage = (Message)inFromClient.readObject();
   Do something with client request ...
   I suggest you to create a WorkerThread for
   each client request.
   For example:
   new (WorkerThread(inMessage)).start();
   This way, your server thread will immediately serve
   the next client request ASAP.
public class WatcherThread extends Thread {
   private static accept = false;
   public static void acceptFlag() {
        flag = true;
   public void run() {
       while(true) {
           try { sleep(10000); } catch (Exception ex) { }
           if (!accept) { // never accepted after 10000 msecs
              ... do your System.in here ...
           flag=false;
}The idea is, your server notify WatcherThread if a client connect. WathcerThread runs at seperate thread. It waits for 10000 msecs and check if Server ever gets connect request from server. If it doesn't then you can do your System.in, otherwise, it will wait for 10000 again..
FYI, next time, please use [ code ] and [ / code ] to format your code. It discourage me to read plain whole-left-aligned code like yours.
See: http://forum.java.sun.com/features.jsp#Formatting
rgds,
Alex

How to get the IP of the client when TCP connect in the server

How to get the IP of the client when TCP connect in the server.
The only parameter got from the connection is connectionID.
Solved!
Go to Solution.

I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

How to get the failover partner name from C++ client

Hi All,
I have configured the mirroring session for my application.
I want to modify the connection string with failover partner name.
Could any one please let me to know how to get the failover partner instance from C++ client dynamically.
Thanks,
Prasad.

Are you looking for this?
http://www.connectionstrings.com/sql-server-2012/
http://stackoverflow.com/questions/25534972/auto-failover-multiple-connections-to-mirror-database-when-principal-goes-down

How to get the real client ip from HttpClusterServlet?

Hi All,
 WL 6.0 sp2 on Linux.
 When HttpClusterServlet is used, invoking HttpServletRequest.getServerName()
 will return the server name of the proxy server where HttpClusterServlet
 installed,
 rather than the actual client's ip which we are interested in.
 Anybody knows how to get the correct client ip through the proxy server? Any
 workaround? Or does a patch exist?
 Any help will be appreciated,
 Lynch


Sorry I mean HTTPServlet.getRemoteAddr()
 "Lynch" <[email protected]> ¼¶¼g©ó¶l¥ó
 news:3baea0c5$[email protected]..
 > Hi All,
 >
 > WL 6.0 sp2 on Linux.
 >
 > When HttpClusterServlet is used, invoking
 HttpServletRequest.getServerName()
 > will return the server name of the proxy server where HttpClusterServlet
 > installed,
 > rather than the actual client's ip which we are interested in.
 >
 > Anybody knows how to get the correct client ip through the proxy server?
 Any
 > workaround? Or does a patch exist?
 >
 > Any help will be appreciated,
 > Lynch
 >
 >

[6136] How-to get the initial IMPS client ?

Similar Messages

Maybe you are looking for