6151 Local Mode

I have a recurrent problem with my Nokia 6151, bought 2 months ago, that makes me think there is an error in the software.
I use to use to switch off the phone at night, while programming the alarm on the morning, to wake up. I have been doing this for years with other phones, also Nokia. But from the first day I bought the 6151 this was not possible, as the alarm did not activate, and on the morning I found the phone not responding al all, with the message "Local Mode" on the display, having to take out the battery to be able to use it again. I could see that this (showing "Local Mode" ) happened at the moment that the alarm was programmed to activate.
Firstly, the shop changed my phone for another one (same model), but the problem was the same.
Then the phone was sent to the Nokia Service, and after 3 weeks they told me that had updated the phone software.
After this, the problem persists.
What can I do?Message Edited by monsalvegf on 05-Aug-200705:11 PM

SIMILAR:
I bought myself 1 month ago the mobile Nokia 6151.
Initially, 3 ó the first 4 unloads, when it(he,she) was setting it to load I was leaving on the screen "LOCAL MODE " and the symbol of load was not seen. The battery was difficult to me to fit until I was achieving that I was loading. I changed the following adjustment:
Menu - Adjustments - Adjustments of the telephone - Way of network(net) and I selected "GSM"
With this change, from then, it loads the first one.
But this week I have started using the alarm of the mobile and the alarm does not sound. It has spent(passed) 2 times.
In this moment when I look at the mobile me there appears on the screen the same text: "LOCAL MODE ". I try to ignite the mobile but it's not possible. I have to extract the battery, turn it to placing and this way the mobile is ignited.
I do not understand that it happens ...! Is it a failure of the mobile, of which I have formed badly the mobile or that?
I have consulted the user guide but I have not found anything about this. I would like that you were helping me to solve this topic, please.

Similar Messages

Slow report viewer/rdlc performance in local mode with Single Sign On

Hi Team,
We have recently enabled Single Sign On to our application and after that our rdlc reports loading got extremely slow.
Please find the below configuration that we are using.
1. Report Viewer 11.0.0.0
2. running rdlc file in local mode (not using Report Server)
3. System.IdentityModel.Services 4.0.0.0
The query behind the reports is returning result in 5-10 sec but report is taking 1-4 min to load (sometimes getting timeout) (as per the complexity of the report).
We have tried a lot of workaound but nothing worked.
i saw performance improvement in reports by addding <trust legacyCasModel = "True" level="Full" /> in config file, But using this we are getting "Dynamic operations can only be performed in homogenous AppDomain" error
in many pages of our application.
Without SSO reports are running completely fine.
We are stucked here and not able to proceed. Is there any issue with the SSO and rdlc in local mode ? Is there any hot fix available for the same ?
Please help !!!
Regards,
Pranav Sharma

This problem is probably related to :
[http://blogs.oracle.com/stevenChan/2010/03/ebs_jre_issues_16018.html]
Oracle problem ID : 1054293.1
Loginpage / Error in Browser for Export and Attachments after upgrading to Sun JRE 1.6.0_18 [ID 1054293.1]
Sun bug : 6927268
ShowDocument calls results in new iexplorer process

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

HREAP & Local mode configuration for one SSID

I'm looking to provide one SSID Corporate access to multiple sites using HREAP. My question is it possible to configure one SSID and switch the traffic locally?
I have a controller in the main site that provides one SSID for Corporate access (AP's in Local mode) and would like to have the same SSID used at the remote sites, only difference is the break out locally.
Do I need to configure the HREAP interface on the controller if it is switching locally at the remote site? If so what interface should it be? I thought it would be locally anyway?

yes, you can do this.
In the WLAN, select HREAP Local switching. This does not mean that the WLAN is always locally switched, just that it can be.
Put the AP that need to be HREAP/FlexConnect in that mode, reboot, then map the WLAN to the approrpriate VLAN for that site.
For the AP that you want to do central switching, just leave them as they are.
Steve

What is the correct command sequence code in Labview that will take an instrument out of Remote and put it in Local mode?

I am writing a routine in Labview 5.1 that will capture the screen data on a Network Analyzer after configuring the display. The routine to capture the data is working fine but when I try to send the equipment into local to allow me to manually make another change to the data I want to capture, the analyzer will go into a listen mode. The command I am sending to the analyzer using the 488 misc function is "loc". I've notice that is seems to put the anayzer into listen mode which will not respond to the commands to capture the screen data again.

Check the manual for the instrument. Some instruments do not have a specific command to go into local (or remote) mode. Tektronix oscilloscopes use the GTL command to Go To Local. HP and Agilent instruments do not have a command for this.
It's been a while since I used LV5.1, but in LV6, there is a VI under Instrument I/O->488->488.2 that allows you to set instruments into local mode. Hopefully, the same VIs exist in LV5.1.
Rob

Local mode update in bdc -Call transaction method

what is LOCAL MODE UPDATE in BDC- Call transaction methods ?

Hi,
Try to understand from the below CODE
CALL TRANSACTION 'ZBDCSINGLE' USING IT_BDCDATA MODE 'A' UPDATE 'S' MESSAGES INTO IT_BDCMSGCOLL.
REFRESH IT_BDCDATA.
Cheers!!

Nokia c2-02 showing local mode after software upda...

I TRIED TO UPDATE NOKIA C2-02 WITH PC SUITE AND INTERNET CONNECTION
IT WAS ALL GOING SMOOTHLY AFTER SOMETIME IT SHOWED RESTART YOUR PC FOR FURTHER INSTALLATION I DID IT AND NOW AFTER RESTARTING MY PC WHEN I ON THE PC SUITE APLLICATION IT SHOWD NO PHONE CONECTED AND MY NOKIA MOBILE IS SHOWING "LOCAL MODE".
PLEASE SOMEONE HELP ME HOW TO RESOLVE THIS PROBLEM
I AM WORRIED

Nokia c2-02 showing local mode after software update

HREAP vs LOCAL modes

after reading through numerous docs from Cisco - it seems that latest firmware on WLC provides HREAP functions similar to that of using local mode. So what if the APs on a LAN are all set to HREAP giving you the benefit of redundancy and also network local switching avoiding that local traffic needs to traverse the WLC ? I know Cisco are still recommneding use of HREAP for WAN remote sites - but why not use it on LAN too ? The limitations are very few and most either relate to WAN type (which on LAN these do not apply) or else refer to when LAP looses WLC communication (at least it works in limited mode better than not at all like when it is set for 'local' mode. The HREAP does not use CAPWAP tunnel to encapsulate data traffic so I agree some security is lost but if security at the LAP end is not a big issue for client I still see all other features work with HREAP - like RRM / Roaming etc . so you get full benefits of WLC whne HREAP is in connect mode and keep some if WLC is down .. can anyine convince me otherwise ? : )

As per my usual on this type of question.
It all depends on what you want to do.
Yes, you can use the AP like they were autonomous, and bridge all the traffic down to the LAN if you want. Or you can backhaul it to the WLC. It's all up to what you need to support.
For example, if you were using Air Fortress, you would have to use HREAP, because of how that applicaiton interacts.
If you're only doing standard, web and email, there is no real need to.
Both designs are valid, all depending on what you want to do.
As for the security aspect of it, the traffic on the LAN isn't encrypted anyway. So once the traffic egresses the WLC, it's raw, if you have a protocol analyzer you can get the data. So that comes down to physicl security more than anything, not wired vs. wireless.
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

What happens if Local Mode LAP lost connection to Controller?

Hey,
I wonder what happens to the wireless client and LAP running in local mode if connection to wireless lan controller is down OR the controller itself is down? I do not think LAP will reboot by itself but will wireless client lost wifi connection and internet connection via the LAP?

H-REAP/FlexConnect is different and it can keep clients connected depending on authentication methods. This will explain it better:
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1224777
Sent from Cisco Technical Support iPhone App

Wat is synchronous, asynchronous & local mode of update in BDC plz help

wat is synchronous, asynchronous & local mode of update in BDC .
plz explain each of them

A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed( does not wait till the update in database is complete either it is successful or un successful). It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
reward if it is helpful..
sai ramesh.

HREAP vs AP local mode

Hello,
Could someone explain the advantages or differences in using HREAP (when the traffic is centrally switched), to just using the APs in local mode with a centralized WLC?
Scenario- 1 HQ and several branch offices. All resources are at the HQ including DHCP and internet break-out.
Thanks

Well it depends if the lwapp traffic takes up too much of your WAN bandwidth. If not, then run local.... I have clients that have gig connections to their branch offices that run every ap in local mode. I also have clients that run the branch office ap's in h-reap due to bandwidth constraints. Even though traffic will end up back in the central site doesn't mean you can't run the ap's in h-reap. The good thing with h-reap is that if the wlc becomes unreachable for some reason, the ap's will still be up and running. Encryption that can be run in local mode can still be ran in h-reap. The senerio that is in alot of docs is that if your wan goes down, users who need to authenticate back to a radius server in the central site will fail.... that is because the wan is down. Again, you can run locally first and see how that works.

How to cleanly migrate APs from local mode to flex-connect?

I am working with an existing network where all APs are remote from the WLC at the data center. All APs were configured to run in local mode. I am trying to reconfigure these APs to flex-connect mode and local switching.
Configuring the APs themselves to flex-connect and reconfiguring the switch ports is not an issue.
None of the WLANs are currently configured for flex-connect local switching.
When I configure a WLAN to allow local switching several of the APs cease to service clients.
I am not permitted to change/add a new WLAN so I have to do this in place. This has to be transparent to the users.
Any thoughts would be appreciated.

The AP has been changed to flex-connect mode from local and the native VLAN is set to 10. The switch port is trunked with the native VLAN set to 10. This works fine until I try to change the WLAN to allow local switching.
This example is a small site and all data clients are assigned to VLAN10.

Anyone ever heard of 'Local Mode'?

Mine locked on local mode an wouldn't turn on.
The manual doesn't mention local mode on the 6126.
Depression is anger without enthusiasm.

Local Mode is like Safe Mode - the phone has an internal failure and it unable to start up. Please take the phone to a Nokia Service Center.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question...

Nokia 2610 local mode????

my mans phone says local mode on front display screen and we cant get it to go away. we cant even turn the phone off without taking out the battery. my question is what is local mode and how do i turn it off? or is this just simply impossible and we need to get a new phone? I openly admit tha phone is not been treated with the best of care. He has dropped it off a 15 ft deck on to pavment but it still worked, and he has also gone swiming with it in his pocket, and it again still worked. but now out of the blue with no damage being added to the phone it started to display the "local Mode" and we cant do anything with it. Is there anyway to solve this problem?

Well folks,
I bought 7373 only 3 days ago & have experienced a similar problem. My problem occurs when there is no charge in the phone i.e battery is completely dead. When I connect the charger, the phone automatically turns itself to LOCAL MODE. And then, the only way to make the phone operational is by removing & placing the battery again. I got so frustrated that I decided to do something about it by myself.
And I just came to the solution for this by chance :
Instead of trying to charge the phone in the swivel closed condition, try charging the phone in the swivel open condition. That is, whenever your phone is completely dead & the screen is blank, first turn open the swivel & then put the charger jack in the phone. After you see the battery sign that the phone is getting charged, you can close down the swivel.
Hope this helps. It is working fine for me.
Thanks

Nokia 7373 - local mode.. why?

hey guys...
i have one problem with my nokia 7373.. it's the second time around in two weeks: when the battery goes empty, i put my nokia in battery charger and when i try to turn it on all i got was this message: local mode and i couldn't turn it on. i pulled out the battery and the card couple of times, nothing. only the third time after pulling the battery and the card, i managed to turn on my mobile.
any ideas what's wrong and why this local mode appears?
thank you inn advance guys!
vivienne

Hi vivienne_hr
When you say "put in battery charger" do you mean a desktop charger, rather than plugging one in? There may be damage to the middle pin of connector.
Local mode is needed by technician when accessing phone EEprom, but you should not see it normally.
Happy to have helped forum in a small way with a Support Ratio = 37.0

6151 Local Mode

Similar Messages

Maybe you are looking for