620 slower after cyan update

Hello everybody...
I noticed that after the cyan update, my Lumia 620 is much slower than before. I don't want to downgrade to black... Is there any setting I have to do or something like that to speed up my phone again?
Phones history: 5110, 6110, 3330, 6600S, 6120C, E65, E75, L620, L820

Hi r3mycc,
Are you getting this issue when accessing anything on the phone or when accessing a specific app? You can try the troubleshooting steps found on the below link:
• My phone does not work or respond as expected
Note: This link is intended for the Philippines. You can give us your location so we can give you the correct link.
We hope to hear from you the soonest.

Similar Messages

  • Everything is so slow after I updated to 10.7.2...Help:(

    I have a Macbook pro 15''.. Bought this Aug.
    Everything is so slow after I updated to 10.7.2 .....
    Especially now it takes me 1 min to turn on my laptop... which used need only 10 sec. So does Turn off...before update it is 2 sec, now it is 30 sec...
    What should I do to make it faster?
    Thanks.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Error code 80070005 after cyan update

    After cyan update, I cant sign in microsoft account in my lumia 520. There will be error code 80070005. Help me solve that problem.
    Solved!
    Go to Solution.

    even me also facing this problem plus other installed softwares are also not working and unable to update them from store. Its giving error code : 80070006 for updation. 
    Is there any issue in cyan update? If so, then why these guys rollout this update after so much testing.
    Attachments:
    screenshot.jpg ‏483 KB

  • Lumia 1520 issue after cyan update

    After cyan update the screen start vibrating automatically and open Bing search and some random apps. I don't have any control of that.
    Then navigation bottom stop working. Sometimes I need to restart it or lock/unlock screen to make it work. This is very annoying. I never had this issue with wp8.

    Try making changes in Display settings and see if that is of any help: 1. Display - Sunlight Readability off 2.Touch - Sensitivity Normal
    Click on "Accept as solution" if it worked for you else if it was helpful you can click on "Kudos star" below.

  • Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243

    Hi,
    My Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243. For example it sends text message 10-15 seconds after send button has been hit.
    Can not answer the phone when a caller is calling (answer slide interface is unrespnsovie), if I want to launch any application screen turns black and nothing happens, etc.
    Does anyone experience similar issues?
    Thank you.
    Michal.

    Hi and Welcome to the Community!
    A quick read of this site will answer your final question quite clearly. The "fix" depends on several factors, but given what you describe I recommend you immediately update, via AutoLoader, to the most recent version (.2582)...some of the prior versions contain some particularly challenging issues, which are reported to be fixed in this version.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Itunes starts extremely slow after an update of windows 8.1.

    Itunes starts extremely slow after an update of windows 8.1.
    It takes up to 10 minutus.
    If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
    For instance:
      Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
    followed by
      SendWakeupPacket error: sent -1 bytes: 10065
    What can this be?
    Already thanks,
    John

    I did all the step with save mode and that didn't gave the same result.
    Then I created a new account and there itunes started up normally.
    So I contued with the user section.
    I removed the itunes directory from
    c:\Users\username\AppData\Local\Apple Computer\iTunes
    This gave the same result in not starting up.
    Then I removed the itunes directory from
    c:\Users\username\AppData\Roaming\Apple Computer\iTunes
    The a popup appears that the Bonjour Service has been disabled.
    I looked in services and saw that is was still running.
    But I tried to restart this service and it took a long time to stop this service.
    Even if I selected restart the Bonjour Service didn't start.
    Manually starting was not a problem.
    Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
    So Matt thanks for your answer.
    If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

  • Lumia 620 not woking after cyan update

    I did cyan update on lumia 620 , while updating it shows a sad smile and rebooted to running wheels. after 20-30 seconds its keep rebooting and the loop continues.
    Future is here. where ????
    help me if you can. anyway am not going to stay with nokia and wp.

    Hi, vaissocial. Sorry to learn about your experience in updating your phone. Let's try to recover your phone through the following troubleshooting steps:
    1. Hardware Reset
    Note: All information on your phone will be deleted and anything that has not been backed up will be lost during this process. If you cannot access your phone's menu, unfortunately you will not be able to backup any data.
    a. Make sure your phone is powered off.
    b. Press and hold the volume down button.
    c. Press the power button until the phone vibrates, then release the power button.
    d. Keep the volume down button held until you see an '!' on the screen, then release the volume down button.
    When the ! appears, press the following buttons in order:
    volume up
    volume down
    power
    volume down
    You should see rotating gears on your screen for around 5 minute and its display will then turn blank for 30 seconds while your phone restarts. It will take several minutes for it to restart. Once it has restarted, you will need to follow the on-screen instructions and complete the initial set-up process on your phone.
    2. If the issue remains, we suggest recovering your phone's software using the Nokia Software Recovery Tool. For more information, please check this link: http://www.microsoft.com/en-gb/mobile/support/faq/?action=singleTopic&topic=FA142987.
    BTW, the link is from the Nokia UK website. For future reference, please refer to your local Nokia website. Keep us posted with the outcome.

  • Lumia 925 rebooted after cyan update (everything i...

    Hi all,
    I installed Cyan update less than a week ago (Finland). Everything worked fine, but today my Lumia 925 started to install by itself software updates after which it erased ALL information (pictures, personal software. addressbook  etc) from the phone! I also received an SMS from Microsoft congratulating me for buying a Lumia! All the software that is left is the "original" as if I just had purchased the phone. 
    I logged into my Microsoft account but no information was recovered. I guess this has to do with cyan update. 
    Can you help me please?!

    You should not need to use the software reinstallation tool in this case, simply perform a reset of the phone from Settings, provided the backup option was switched on before the update you will have a backup linked to your Microsoft account, and your contacts at least are automatically sunced with that anyway. Automatic back-ups are normally switched on by defalut.
    When the phone starts after the reset, there is an option during the boot-up process that asks if you wish to reinstall an earlier backup. Again, as long as you had all options selected, the resotration would inlude all items from the last back-up.
    With regard to the update happening automatically, the phone can (if the setting is switched on) download updates automatically but it is not installed automatically, you would have received a notification on the screen and you would have pressed to install, perhaps this happened at a time when you were preoccupied and you pressed without checking what the notification referred to.
    The welcome message is an automated part of the initial boot-up process, even after resets and updates.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Safari super slow after latest update to 10.9.1.  Please help.  Thanks.

    My internet is deathly slow after doing the update.  Any advice?  Other programs seem fine.  Thanks, Yvette

    Hi yipck,
    Thanks for visiting Apple Support Communities.
    I recommend starting with the tips in this article if Safari is loading web pages slowly:
    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
    http://support.apple.com/kb/ts3408
    Best,
    Jeremy

  • Mobile data extremely slow after iOS update 8.1.3

    After I updated to iOS 8.1.3, my data speed works like at 2G speed. My phone says its still has LTE, but it's definitely not. Even when I turn off the LTE, and my phone is connected to 3G, it's still incredibly slow. I've also tried restoring the phone, turning on and off data roaming, and of course restarting my phone countless times. I have net10, which runs on AT&T towers in my area. I used to have iOS 8.1.2 before I updated. I'm preety tech savvy, but I haven't been able to fix this. It's extremely annoying and frustrating to have such slow internet since I'm away from wifi for most of the day. Any help?

    So I called Net10 today and this time the customer representive that I spoke to knew what to do. They basically ended up resetting my data connection and it was good to go afterwards. 

  • Cant watch mp4 files after cyan update

    Hello
    After I updated my Nokia Lumia 520 to cyan I couldn't watch any mp4 files anymore. Can somebody help me with this problem?

    Excel Mobile doesn't support all the features and functions that are found in Microsoft Excel 2010 or later. If a workbook has content that's not supported, you can still open the workbook. The unsupported content won't              be displayed though, and you might not be able to edit the workbook on your phone. If a function isn't supported, the calculated value will still appear in  the cell, but you won't be able to edit the workbook on your phone.
    http://www.windowsphone.com/en-US/how-to/wp8/office/use-excel-mobile

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Mail account on Lumia 925 after Cyan update.

    After completing the Cyan update on my Lumia 925 I had to go through the new procedure to reactivate my Google account (G-mail) on my phone. I followed all the steps in the procedure and finished. The next thing that happened was that the account was displayed in the account list but with dimmed letters and indicating "synchronizing". Twelve hours later it is still the same. And it is not possible to mark this account to delete it and start over. Have also tried to activate the same account one more time but then get the message that that account already is active on this devise.
    Restarting the phone did not help either. Hope someone can help.

    I went through the standard setup where the phone sends you to a google page for authentication with username end password for the Gmail account. Then you have to agree with Google/gmail terms, and then sett which things to synchronize (calendar, contacts and e-mail). And chose manual or automatic updates. I chose to only synchronize e-mail and do only manual synchronization. Then I hit finish and the account started its synchronization which has never ended.

  • Macbook pro slow after shockwave update

    Hi all,
    My Macbook Pro has become exceptionally slow after a shockwave update. The fan is on constantly and the activity monitor shows firefox to be using around 100% of resources. Has anyone got any suggestions?
    Niall

    Hi all,
    My Macbook Pro has become exceptionally slow after a shockwave update. The fan is on constantly and the activity monitor shows firefox to be using around 100% of resources. Has anyone got any suggestions?
    Niall

  • ITunes Store Slow After New Update...

    After downloading the new iTunes update, the iTunes store is incredibly slow! It also took away the feature of sorting the Top 100 songs by release date. I used this feature frequently to find hot new music. Can I download one of the older versions? Someone help :/

    After the update iTunes is extremly SLOW. Prior to the update I was able to rent movies with a total download time of less than one hour and begin watching it in 5 minutes without problems. After the update it tells me it will take TWO DAYS to download. Even on the apple tv downloads are that slow. At this rate it would be quicker to get a blueray disk mailed to my door from netflix!!!! Apple please fix your itune store issues

Maybe you are looking for

  • Error in creating BAI File with program - RFEBKAT5

    Hi All I have an issues in Creating a BAI test file for Electronics bank Statement Document is Getting Posted (Document number is getting created)         Statement File (detail)                Recon1 (Green)                Lines (green)             

  • Cannot connect from iMac to Windows Home Server 2011 shares

    Hi guys, I am having dificulties connecting from iMac to Windows Home Server 2011 shares. First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Faile

  • Force use of Model Node

    Hello All, I was wondering whether there is a way to force users to become a model node in a given environment rather than give them the choice of specifying model node or an individual node name. What happens is that our developers, all on the same

  • Http server start-up error with portal

    When attempting to start the http server I receive the following error: [Tue Feb 12 16:14:20 2002] [crit] (10038)(FormatMessage failed with code 317): Parent: WSADuplicateSocket failed for socket 248. [Tue Feb 12 16:14:20 2002] [error] (2)No such fil

  • About Sun Certified Web Component Developer for the Java 2 ... course

    i want to know if i take the Sun Certified Web Component Developer for the Java 2 course,then could i write j2EE application with oracle envirmet and the websphere enviriment or should i take extra course if i mant to work in any of these enviroments