6210 Navigator - disabling camera button?

My new 6210 is driving me nuts.
Even when the keypad is locked the camera button (on the botton right hand side) is active.
This means that just about every time I take it out of my pocket or bag it is in camera mode.
Is there a way to disable this button while the phone is locked and in standby mode?

make sure you don't have your cam app running in the background. you can check that by pressing the c button for a few seconds it will display all running apps on your system. make sure you do not carry your phone with magnets near by, metal and such as this also may affect your phones performance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

Disable the default "Start my camera" button for rtc WebcamPublisher

Hello,
I notice in the samples that WebCamera displays the cam. Is there an easy way of disabling the "Start my camera" button? I wish to control this from the app itself.
<rtc:WebCamera width="65%" height="396" id="webCamPub"/>
I notice in the WebCamera sample that it achieves removing the default "Start my camera" button, by assigning the rtc Webcamera a width and height of 1 and manipulating these through WebCamPublisher class, but I do not see anywhere a "button" = disabled or something similar .

Ok thanks, overriding the addStartStopBtn function fortunately was a piece of cake for the WebCamera class, and that was all I needed.
I notice WebCamera is extremely advanced compared to the simpler webcamsuvscriber stuff.
I try to build on adobe grown material so I can avoid high maintenance costs down the road

IPhone 3GS iOS 6.1.3 - camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

iPhone 3GS iOS 6.1.3 - camera doesn't work. Shutter won't open & camera button becomes disabled. Pls advise what to do? I have already tried resetting the phone several times.

Hello Kunmon,
The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

«A Nightmare called 6210 Navigator» - Part II / Ex...

In the post - «A Nightmare called Nokia 6210 Navigator» - I explained my disappointment with this new navigator model, specially for people, like me, who own and intensively used the «6110» before.
In all fairness to all of you - Nokia included - I found I should explain myself better.
I have both 'Navigator Phones' - 6110 (with firmware 6.01) & 6210 (with Firmware 3.08, updated first to 3.25 and now to 4.13, if I remember correctly) - have returned the first 6210 and will return again this second unit, mainly because of its lousy sound and 'bluetooth' crackles every time I got Map/Road directions... From which you hear the last words - only - most of the time and what makes this phone useless as a ('voiced') navigation tool.
Maybe the navigation function/program is not supposed to be the main phone feature any more, because Nokia is also using one bad/cheap loudspeaker in the 6210, while the 6110 had two good ones that worked fine against the engine/road/car noise...
My second 6210 surely confirms this is the case, as by now I know that my first (6210) returned unit was clearly not a defective one in terms of 'sound/bluetooth' capabilities - I returned it to the shop during my legal 30 day return period - because for what sound is concerned, this second unit confirms it: The phone is just like that - scrappy!
There are, however, other major problems to be concerned about...
The 'voice command dedicated button' was also removed - this function is now available through the upper right button - making it impossible to use (activating 'bluetooth', for instance) if you are inside any phone application (Maps 2.0, included)!
Has anybody tried a prototype before the phone release? Has anybody used a 6110 Navigator before? I guess not!
This is even more stupid/cumbersome, as for instance, the lower left button is free for this action (keep it pushed for more than 1 second) and would be a much more clever (and logical) solution...
It seems developers either don't waist much time balancing their solutions or haven't thought about it at all! (At least, this can be fixed by remapping the button in a further firmware update, although I doubt they care - or will, eventually, do it...)
IMO, the above described hardware shortcomings, alone, are enough to rule out this phone as a (Car/Driving) navigator unit, and no software or firmware update/release is going to (or can) alter this fact.
If you need to stay with Nokia, the (two years) 'old' «6110 Navigator», is undoubtedly a much better and user friendly 'Phone Navigation' unit - with or without Nokia's Maps application!
If you want to know a little more about other 6210's "Shortcomings & Problems', please do read further...
Maybe releasing a new model every year doesn't give them much time to think... Nevertheless it's there option and frankly it's not an excuse, at least, as far as I'm concerned!
Ergonomically there are other basic errors:
1. The phone front 'fascia' doesn't open/slide enough for you to have space to effectively use the upper keyboard row/buttons.
2. The lower keyboard row is placed to close to the unit's end, making it quite difficult to dial with your thumb while holding the phone in the palm of your hand.
...Sorry to say, but it's a bad/defective layout design! Again, I doubt a prototype was tested by human hands!
...And now - as it seems to be usual with the last Nokia products - The Bugs:
(Please feel free to add the ones you've found - It came a time I gave up using the phone any more!)
1. I couldn't connect the phone by 'bluetooth' with Nokia's own/dedicated «Pc Suite v.7.1.18.0»! (I'm using Win XP Prof SP3)
A bug, the lousy 'bluetooth' sound/connection, or a defective unit?
I discovered that it only happened with my first unit, which I now conclude - was defective. (I had given up after several hours lost trying to figure out what was wrong and discovering that the 'old' 6110 still worked perfectly, even with the new/last «Pc Suite» versions and settings!)
The second phone works now flawlessly with the «Pc Suite» program, I have to say!
2. Setting an alarm to a different day rather than the actual one, switches the alarm back to the actual day, as soon as you save it!
Another bug that 'Beta Users' seem to have forgotten. It's unbelievable how basic things like this can happen... Well, maybe they never used the alarm (or the phone), after all?
Corrected in firmware 4.13; so it seems... (However it took two firmware releases to correct it! Inexcusable, from my point of view!)
3. When navigating, if you receive or make a phone call the 'Navigation Screen' doesn't show back again after ending the call, although you continue receiving 'road voice indications'; to have your 'Map Display/Visual Road Indications' once again you need to 'hit' the 'Start
Application Button' once again - Delirious!!!
4. With 'bluetooth' on, if you give a 'Contacts Voice Command' you don't have sound/voice 'feed back / confirmation' for the 'dialled contact' (as you had in the 6110) - you have to look at the screen to aknowledge it - Quite unsafe if you're driving...
Last... And as usual... Some 'phone freezing', so we can rehearse (and improve) our 'Remove Battery' exercise...
Welcome to the club, thank you very much, I hope you enjoy!
There are several other 'malfunction' that I will not go into depth, as they are user/personal related, and quite frankly I'm so tired of this phone, that I don't feel like going on, and on, pointing out all those shortcomings - after all this should be Nokia's Team own home work!
The ones I pointed out are enough, at least for me, to say - bye, bye, «Nokia 6210 Navigator».
I may even continue to use my old '6110' - Why not? Not perfect, but a much better (navigator) phone - But I'm surely will looking quite closely into another brand for my next (navigator) phone!
Best wishes to all of you (Nokia, included),
telele
P.S. - As usual, you are entitled to contradict my findings... Update the bugs list... Or even praise the «6210 Navigator» phone.
All your comments are surely welcome!
I, on the other hand, will be returning this second unit.
Sorry, but I had enough - Period.
Message Edited by telele on 18-Jan-2009 06:54 PM
Message Edited by telele on 18-Jan-2009 06:55 PM

I have also 'upgraded' from a 6110 Navigator to a 6210 Navigator and found the newer model to be considerably harder to use.
In particular, your point #4 about not having a warning beep when issuing a voice command while in bluetooth/car mode is my number 1 gripe as it makes my cars bluetooth and phones voice dialling completely useless.
If you have found a solution to that particular issue please let me know.

N8 camera button not working

mmtoday my nokia n8 had problm↲its camera button had stopd working↲by presing camera button it only focuses the view but doesnt c5ick the photo↲↲plz help me em really scared↲my phn is in warranty wil nokia wil repair it for free

PsychoDan wrote:
Try turning the phone off and on again. Just had the camera button on mine stop working at all. and this fixed my problem. As the button still does something. It is unlikely that it is hardware issue so changing the phone should not be necessary. Probably is an operating system glitch that you ran into. If you know how to repeat the problem then it would be useful to post a bug report and then Nokia can fix it! Chances are you don't though and have better things to do than look for it!
Same here - worked for a first three weeks then quit! Seems like in general the phone has started getting slower and delayed over time, especial with touchscreen navigation, so I suspect it's a software issue.
Button won't turn on camera on anymore and only does autofocus but not shoots....
Anybody has found a workaround?
It seems the on/off doesn't work but it does seem to me if you let the battery completely drain and then recharge and restart, a number of other functions does better....
Did anyone call Nokia for this? What did they say?

Problems with replying to messages 6210 navigator

I have the 6210 navigator and when I reply to messages that are in my inbox and then press send (no i do not save them I send them) They - at random - go into my drafts box. Its very frustrating as I think I have replied to my messages and then figure out after a few days that half my messages aren't going. This has happened since I go the phone.
This has never happened on any other phone and no one in customer care has a clue? Anyone else had this problem or know how to fix it?

Are you always in area with sufficient network coverage like a subway or in a forest or..... when you send? In fact the answer is very easy: just check if the message is sent.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

6210 navigator restarts

I ve just updated my 6210 navigator phone to the latest firmware 4.3.
i note with this virsion that i cant play the Tutorial video .the phone freeze after 3 seconds when vedio started and the phone go to restart.
the same thing happen when trying to play the standard games included in this phone.
what is the problem?..please help.

try the following if it fails bring it to a nokia care point
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Car kit for 6210 Navigator

I've just upgraded from a 6230i, for which I have a Cark126 car kit, to the 6210 Navigator. I can't find anything like my current car kit for the Navigator. I really wanted to just plug the phone into a cradle and have it immediately charge and connect to the car's handsfree.
What do you all think is the best way to go 'hands-free' in the car, with my new phone? My hubby says he's capable of wiring a hands-free kit if it's straightforward but that he's no car or electronics expert!

Both the CK-100 and CK-300 have a charging cable coming from the control unit.
The charging cable plugs into the bottom of the cradle and then every time you put the phone in the cradle, it will be on charge and held legally. The actual connection to the car kit itself is over wireless Bluetooth.
If your car has aux in on the stereo system then the CK-300 is the all singing, all dancing option as you can operate more controls of the phone from the control button of the car kit AND have music from the phone playing through the car stereo PLUS a 3.5mm jack that you can connect an IPod to.
However you do not have aux in, the CK-100 will give a good simple solution and still give you the wireless music option but played directly through the car speakers.

Captivate 7 - Can you disable a button in Properties?

Hi,
I have a screen with popups and want to disable the navigation buttons until each popup is closed. I am disabling the buttons in the scripts that open the popups, which is fine. However, I am at showing "dummy" navigation buttons on top of the real buttons that look greyed out. These don't do anything but I can't find a way of disabling them so you can't tab to them without having to write a script for the page to disable them.
Is there a way to disable buttons without writing a script for page enter?
Or, better yet, is there a way to change the look of a button between enabled and disabled (I'm using a lighter font color for my disabled buttons)?
Thanks for any suggestions.

I've just discovered that just disabling the buttons will not disable the tabbing. You don't see the tabbing, but nonetheless these disabled buttons are included in the tabbing.
So... is there any way to exclude buttons from the tabbing order? The only thing I can think of is to reproduce the buttons using a shape ... but I don't know whether I'd be able to get them looking exactly the same unless I use images instead.
Or, is there a way to set the focus so the tabbing starts at a specific object? For example, if I have a popup displayed, I want the focus on the Close button so they don't have to tab around all the other buttons before it gets to the Close button.

Disabling the button till the response comes

hi all
i want the button to be disabled till the response has finished on clicking the button. Can anyone help how to do it.
in java script it can be done, but it is painful for doing each and every form. so i want a centralized way for doing it.
will the submit button help? we had lot of problem due to it when the load increased and several false records came due to clicking the button several times when response took a long time to come.
in our project we will normal button and the action is executed using the action attribute.

There is no other way than disabling the button with Javascript after onclick. Just create a simple function which does that and call that function in the onclick attribute.

Clear form will not disable invoking button

Hi All,
I wrote a procedure to clear all my text fields and disable all buttons. And I call this procedure in a button (insert button). when I presses the insert button, after my button operation, all he text fields get cleared and all my buttons get disabled, except my insert button. I do have code to disable this button in my procedure as well. But for some reason, every other button gets disable except the button which invoked the procedure.
Is there a way to disable the invoking button as well ?
I did try using the clear_form functionality available in the Oracle Forms by default, but no use.
Regards,
Aj

I guess the problem is that the insert-button has the focus when you try to disable it. You cannot disable the current item.
You would have either to navigate to another item first or set the properties "Navigable" and "Mouse Navigable" to False.
Try something like
GO_ITEM('BLOCK.SOME_ENABLED_TEXTITEM');
SET_ITEM_PROPERTY('BLOCK.INSERTBUTTON', ENABLED, PROPERTY_FALSE);

Any app to (temp) disable side buttons

When I'm watching something for example (Netflix) and I want to move the phone, I'd like to disable the side buttons leaving only the touch screen to re-enable the side buttons. Often when positioning the phone, I accidentally press the side buttons .....
Any ideas short of buying better co-ordinated hands?

Nothing I can think of.
there isn't anything I know of that allows control of the pwr, vol+, vol-, cam buttons.
you can work on dexterity and coordination though!

6210 Navigator No screen, backup to SIM

My 6210 Navigator's screen just went kaput and I didn't save my contacts to SIM. I am unable to get PC Suite to work because I can not select the default on the phone.
Can someone either tell me what button and how many clicks to backup to SIM or how to make PC Suite work when I can't view my screen.
The manual says the path ie, options, blah blah
TIA
Bec

Hello,
I too am trying to configure my main screen so it is nice and tidy. I am unable to find a way to remove icons from my main screen. in the afore mentioned post i followed the intstructins till i got to the
" setup (the 1st one) "
I don't have this option.
only
Personalization
date and time
enhancement
slide handling
sensor setting
security
factory setting
positioning
pleas help me to add and remove the icons i want for my main page
thanks for any help
SOMATATA

6210 Navigator Update

I've looked all over this forum and can't find an answer to my problem.
I have a 6210 Navigator (RM-367), software version 3.08 and can't update. Everytime I try to update my monile reboots after a bit and my computer claims not to haev a connection to it. It happens every time.
I followed every indication the nokia sofware updater advises, to no avail.
Any ideas on how to make it work?

You cannot update your Nokia mobile from Linux. Sadly there is no NSU available for Linux.
Backup your data, format your 6210 Navigator, and then try to update again. The format code is *#7370#. Default lock code is 12345.
I would recommend using a WinXP machine for running NSU
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

How do I disable "Exceptions" button for "Block pop-up windows" in Content tab?. I am able to Disable other Exception buttons in this tab using about:config preference.

Need a way to disable "Exception" button for "Block Pop-up windows" in Tools-> Options -> Content tab. I want to be able to do this for Locking Down Firefox preferences.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

That button doesn't have a pref associated with it, so you can't disable that button with a pref on the about:config page or a lockPref call.
That only leaves the choice to remove that button with code in userChrome.css
<pre><nowiki>#popupPolicyButton {display:none!important;}</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

6210 Navigator - disabling camera button?

Similar Messages

Maybe you are looking for