6210 navigator

Major help required for this phone.
This morning I went to check if I had any messages.NONE! but I now cant use the top 2 buttons on the front of the phone.I also cant use the middle button.I cant get into to check my messages.I can however press the button on the left hand side in the middle which looks like a recycle sign,it takes me to menu but then I cant access anything inside.
PLEASE OH PLEASE if anyone else has had this problem and has fixed it I would appreciate it.
I have turned the phone off and taken the battery out and the sim card and then replaced both and turned the phone back on but it still doesnt work.I can recieve and make calls but I want to get these problems fixed or it will be off to the repair shop.
Thanks in advance for any help with this matter.

See the faqs on the link below, they should tell you everything you need to know.
http://europe.nokia.com/A41005121
Note this applies to the standard nokia maps software on the phone. If voda have replaced it with their own "find & go" software then only voda can help you.
Message Edited by psychomania on 26-Nov-2008 08:35 AM

Similar Messages

  • «A Nightmare called 6210 Navigator» - Part II / Ex...

    In the post - «A Nightmare called Nokia 6210 Navigator» - I explained my disappointment with this new navigator model, specially for people, like me, who own and intensively used the «6110» before.
    In all fairness to all of you - Nokia included - I found I should explain myself better.
    I have both 'Navigator Phones' - 6110 (with firmware 6.01) & 6210 (with Firmware 3.08, updated first to 3.25 and now to 4.13, if I remember correctly) - have returned the first 6210 and will return again this second unit, mainly because of its lousy sound and 'bluetooth' crackles every time I got Map/Road directions... From which you hear the last words - only - most of the time and what makes this phone useless as a ('voiced') navigation tool.
    Maybe the navigation function/program is not supposed to be the main phone feature any more, because Nokia is also using one bad/cheap loudspeaker in the 6210, while the 6110 had two good ones that worked fine against the engine/road/car noise...
    My second 6210 surely confirms this is the case, as by now I know that my first (6210) returned unit was clearly not a defective one in terms of 'sound/bluetooth' capabilities - I returned it to the shop during my legal 30 day return period - because for what sound is concerned, this second unit confirms it: The phone is just like that - scrappy!
    There are, however, other major problems to be concerned about...
    The 'voice command dedicated button' was also removed - this function is now available through the upper right button - making it impossible to use (activating 'bluetooth', for instance) if you are inside any phone application (Maps 2.0, included)!
    Has anybody tried a prototype before the phone release? Has anybody used a 6110 Navigator before? I guess not!
    This is even more stupid/cumbersome, as for instance, the lower left button is free for this action (keep it pushed for more than 1 second) and would be a much more clever (and logical) solution...
    It seems developers either don't waist much time balancing their solutions or haven't thought about it at all! (At least, this can be fixed by remapping the button in a further firmware update, although I doubt they care - or will, eventually, do it...)
    IMO, the above described hardware shortcomings, alone, are enough to rule out this phone as a (Car/Driving) navigator unit, and no software or firmware update/release is going to (or can) alter this fact.
    If you need to stay with Nokia, the (two years) 'old' «6110 Navigator», is undoubtedly a much better and user friendly 'Phone Navigation' unit - with or without Nokia's Maps application!
    If you want to know a little more about other 6210's "Shortcomings & Problems', please do read further...
    Maybe releasing a new model every year doesn't give them much time to think... Nevertheless it's there option and frankly it's not an excuse, at least, as far as I'm concerned!
    Ergonomically there are other basic errors:
    1. The phone front 'fascia' doesn't open/slide enough for you to have space to effectively use the upper keyboard row/buttons.
    2. The lower keyboard row is placed to close to the unit's end, making it quite difficult to dial with your thumb while holding the phone in the palm of your hand.
    ...Sorry to say, but it's a bad/defective layout design! Again, I doubt a prototype was tested by human hands!
    ...And now - as it seems to be usual with the last Nokia products - The Bugs:
    (Please feel free to add the ones you've found - It came a time I gave up using the phone any more!)
    1. I couldn't connect the phone by 'bluetooth' with Nokia's own/dedicated «Pc Suite v.7.1.18.0»! (I'm using Win XP Prof SP3)
    A bug, the lousy 'bluetooth' sound/connection, or a defective unit?
    I discovered that it only happened with my first unit, which I now conclude - was defective. (I had given up after several hours lost trying to figure out what was wrong and discovering that the 'old' 6110 still worked perfectly, even with the new/last «Pc Suite» versions and settings!)
    The second phone works now flawlessly with the «Pc Suite» program, I have to say!
    2. Setting an alarm to a different day rather than the actual one, switches the alarm back to the actual day, as soon as you save it!
    Another bug that 'Beta Users' seem to have forgotten. It's unbelievable how basic things like this can happen... Well, maybe they never used the alarm (or the phone), after all?
    Corrected in firmware 4.13; so it seems... (However it took two firmware releases to correct it! Inexcusable, from my point of view!)
    3. When navigating, if you receive or make a phone call the 'Navigation Screen' doesn't show back again after ending the call, although you continue receiving 'road voice indications'; to have your 'Map Display/Visual Road Indications' once again you need to 'hit' the 'Start
    Application Button' once again - Delirious!!!
    4. With 'bluetooth' on, if you give a 'Contacts Voice Command' you don't have sound/voice 'feed back / confirmation' for the 'dialled contact' (as you had in the 6110) - you have to look at the screen to aknowledge it - Quite unsafe if you're driving...
    Last... And as usual... Some 'phone freezing', so we can rehearse (and improve) our 'Remove Battery' exercise...
    Welcome to the club, thank you very much, I hope you enjoy!
    There are several other 'malfunction' that I will not go into depth, as they are user/personal related, and quite frankly I'm so tired of this phone, that I don't feel like going on, and on, pointing out all those shortcomings - after all this should be Nokia's Team own home work!
    The ones I pointed out are enough, at least for me, to say - bye, bye, «Nokia 6210 Navigator».
    I may even continue to use my old '6110' - Why not? Not perfect, but a much better (navigator) phone - But I'm surely will looking quite closely into another brand for my next (navigator) phone!
    Best wishes to all of you (Nokia, included),
    telele
    P.S. - As usual, you are entitled to contradict my findings... Update the bugs list... Or even praise the «6210 Navigator» phone.
    All your comments are surely welcome!
    I, on the other hand, will be returning this second unit.
    Sorry, but I had enough - Period.
    Message Edited by telele on 18-Jan-2009 06:54 PM
    Message Edited by telele on 18-Jan-2009 06:55 PM

    I have also 'upgraded' from a 6110 Navigator to a 6210 Navigator and found the newer model to be considerably harder to use.
    In particular, your point #4 about not having a warning beep when issuing a voice command while in bluetooth/car mode is my number 1 gripe as it makes my cars bluetooth and phones voice dialling completely useless.
    If you have found a solution to that particular issue please let me know.

  • 6210 Navigator, Bluetooth and car stereo

    Hi there! I just got myself a Nokia 6210 Navigator, and i want to connect it with my car stereo for bluetooth use. I did so with my SonyEricsson T630 with great success. But when i try now, i follow the exact same steps as before, but it does not work. I do get the setup to finish, but when it tries to connect, it just disconnects after about 0.5 seconds. Ive tried several times, and i have deleted the paired phone and everything, but nothing seems to work. I can have 3 phones paired, so that should not be the problem.
    The car stereo is a Pioneer DEH-P700BT.
    Thanks for all help, and feel free to ask if you need some extra info. Thanks!

    I have the 6210 Nav, the only way I can get it to connect is by going through the set up, then letting it link to BT Audioo first, once it sees that, I can select a different source and hey presto!
    But still not good enough!

  • Problems with replying to messages 6210 navigator

    I have the 6210 navigator and when I reply to messages that are in my inbox and then press send (no i do not save them I send them)  They - at random - go into my drafts box. Its very frustrating as I think I have replied to my messages and then figure out after a few days that half my messages aren't going. This has happened since I go the phone.
    This has never happened on any other phone and no one in customer care has a clue? Anyone else had this problem or know how to fix it?

    Are you always in area with sufficient network coverage like a subway or in a forest or..... when you send? In fact the answer is very easy: just check if the message is sent.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • 6210 navigator restarts

    I ve just updated my 6210 navigator phone to the latest firmware 4.3.
    i note with this virsion that i cant play the Tutorial video .the phone freeze after 3 seconds when vedio started and the phone go to restart.
    the same thing happen when trying to play the standard games included in this phone.
    what is the problem?..please help.

    try the following if it fails bring it to a nokia care point
    1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
    2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 6210 Navigator out of date maps for South Africa

    I have downloaded the newest maps for my 6210 navigator but it's out of date. There's streets that has changed names more than a year ago that still reflects as the old names. Also… If I search for street names or addresses it shows addresses for Europe not SA. Is there any way of getting the newest maps and search capabilities for SA? I contacted Nashua SA and they gave me a link for amAzeGps (no explanation or message – just a link – very unprofessional guys). This app is a misery to use and has hidden costs. I want my standard GPS maps to work the way it should for SA.

    @4F
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • 6210 Navigator: Issues with GPS

    Hi there,
    We just got a 6210 navigator phone, and it works great, apart from the GPS function.
    We have only been able to get the GPS function to work once, where the little red dot actually was where we were. Since then everytime we have tried to use it, it keeps saying we are located at home.
    We were in another state and we had an address up on the screen. We selected 'show my location' and it went straight back to our home (some 1200kms away)
    Is there anyway to fix this?? I know the little strength signal in the bottom right corner isnt that strong, but surely it should work in the middle of Melbourne CBD?
    Any hints/tips would be most appreciated. We are with Virgin Mobile.
    thanks

    Electronics and strong magnets do not mix at all although it may not effect the working of the device it can still damage the curcit boards.. I suggest you do not use this pouch again and source another one with a less stong megnet or maybe even an velcro catch
    Current Device; Nokia E71-1 F/W v200.21.118
    Past Devices; Nokia 6220 Classic.. Nokia 6500 Slide.. Nokia 5310 Xpress Music.. Nokia E65.. Nokia 6230i & Many Many More!

  • Car kit for 6210 Navigator

    I've just upgraded from a 6230i, for which I have a Cark126 car kit, to the 6210 Navigator. I can't find anything like my current car kit for the Navigator. I really wanted to just plug the phone into a cradle and have it immediately charge and connect to the car's handsfree.
    What do you all think is the best way to go 'hands-free' in the car, with my new phone? My hubby says he's capable of wiring a hands-free kit if it's straightforward but that he's no car or electronics expert!

    Both the CK-100 and CK-300 have a charging cable coming from the control unit.
    The charging cable plugs into the bottom of the cradle and then every time you put the phone in the cradle, it will be on charge and held legally. The actual connection to the car kit itself is over wireless Bluetooth.
    If your car has aux in on the stereo system then the CK-300 is the all singing, all dancing option as you can operate more controls of the phone from the control button of the car kit AND have music from the phone playing through the car stereo PLUS a 3.5mm jack that you can connect an IPod to.
    However you do not have aux in, the CK-100 will give a good simple solution and still give you the wireless music option but played directly through the car speakers.

  • Nokia 6210 Navigation - license purchase

    Hi, i'm from Malaysia.i'm using Nokia 6210 Navigation. I'm going to Hong Kong & Macau, i've purchased the license for Hong Kong & Macau - Drive & Walk. After the purchasing, i received a receipt through SMS, but there is no license code for me where i find out there is a "enter license code" in my phone. Should i enter the license code to activate it?
    How do i know the license is activated in Hong Kong? Am i only notice when i'm start using in Hong Kong?
    Please help me.
    Thanks
    Saxon

    Hi,
    You can check wether the license has been purchased correctly by Opening the Maps application and going to Options > Extras > My License.
    Your license should be listed here. If it is not, i suggest Updating (can be done from the Options menu within My Licenses).
    You will need to allow the device to go online to check the license server, but it should then acnowledge your purchase.
    If you still have problems, please send me a private message with your IMEI (*#06#) and i will investigate further.
    Cheers
    Chris
    Although i work for Nokia, my opinions are my own!
    Got a Maps query? Check our Maps FAQ's

  • Nokia 6210 Navigator - which version of Nokia maps...

    Hi !
    I`ve tried to upgrade my Nokia 6210 Navigator from Nokia maps 2.0 to Ovi maps 3.01 but it
    doesn´t seems to work.
    If i try to upgrade it with the old Nokia map updater it just says: Cannot get enough information about the phone unspecified error
    Can anyone tell me if this is possible.
    I also get a error message when i try to use this file that ovikovi posted (http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis)
    The error massage that shows up in the phone is:  It doesn´t work to install this file, the unit is built in!
    And in Ovi Suite it says: The file is in use. Another application is using  nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis
    I´ve also tried to uninstall the version og Nokia maps that is installed on the phone but that doesn´t seems to be an option !
    Any one who has a clue of something that can solve my problem.
    Best regards.

    jjegan wrote:
    The tab above download software  maps  gives the following for 6210.
    http://europe.nokia.com/support/product-support/ma​ps-support/compatibility-and-download#/nokia-6210-​...
      jje
    The above link has been working perfectly on my 6210 navigator.
    For the technically savvy,  googling ovi maps "unsupported devices" will teach you how to install maps 3.03 and 3.04.

  • 6210 Navigator : Error Certificate installing Spor...

    Hi, 
    Here is my problem:
    I can't install Nokia Sport Tracker on my Nokia 6210 Navigator because it gives me an error certificate.
    So, trying to update my cellphone, it does not have new update...???
    Nokia 6210 Navigator (RM-367)
    Micrologiciel: 3.25.124.04 (22 oct 2008)
    Code: 0569996
    Looking the both same phone of my parents (Both RM-367), the version is higher 5.something and mine stays at 3.25 without any update... since 2008?????????
    Ovi Suite and Pc Suite doesn't offer me any update...
    I'm desesperate (I've past a few days looking in google without solutions (for example changing the date of the phone, or configurate the application manager (all, no control online of the certificates,...)
    Nothing nothing... I'm thinking about flashing it with an updated software, ultimate action of a desperate man.
    Please help, it's strange that a mobile "updated" can't install a program from Ovi Suite....
    Best regards,

    So my cellphone is updated (following my operador)     and I'm unable to install any aplication from the Ovi Suite... sounds so stupid. The application is the Sports Tracker and it is a new version!!!
    Now that the page "can I update" is finaly working and giving me an answer, 3.25 is indeed the latest update when a free version is now at the 6.05... it is a shame!!!
    I'm now obliged to flash my mobile and use piracy because of Vodafone Spain if I want new applications on this mobile.
    Regards

  • Does 6210 navigator have 3G and wifi?? what is th...

    does 6210 navigator  have 3G and wifi?? what is the maximum external memory supported??

    yes it does. A-GPS is recommended to be used which requires connection to your provider's network and will incur data costs. a suggesion i would have is to maybe purchase N78 instead? it is almost similar in functionality and also has Wi-Fi and FM transmitter, and their GPS functionality are identical. would probably be cheaper as well.
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • After 6210 Navigator 5.16 update, mark with # feat...

    I updated my nokia 6210 navigator to version 5.16. The function where you can mark items by pressing hash (#) has disappeared. Any workarounds?

    Compressor repair? Can you give me more details on what this is?
    I had FCP to Compressor using QMaster (2 CPU instances) working in 10.5.6. It created some bizarre project name under FCP (i.e. 13DAA64E-8A34-4476-A12B-86) but would work. With 10.5.7 the same steps just hang/fail -- fail as in they Submitted batch never completes (I can leave it for 10 hours on a H.264 small duration clip of 30 seconds).
    So now (with 10.5.7) the only way I can get Compressor and Qmaster to work is if I export sequence to QuickTime movie, close FCP, open Compressor create a new batch using the exported QT movie, set my settings/destination then submit. Which defeats the purpose of using a 2 Instance QMaster in the first place since I've had to introduce a Export to Quicktime in FCP. So essentially any benefit using 2 CPUs has been negated by the extra export step.
    Sorry for the frustration/tone, but if I wanted this much hassle with Mac software/OS, I would have just stayed exclusively on a Windows based platform -- as of right now I see very little difference between the two companies, both are not responsive to correct obvious problems and both create more work than solutions. I gotta wonder why I even selected to use a Mac and why I successfully converted at 11 friends over from Windows to Mac - SSDD.
    Frustrated.
    Rob

  • Nokia 6210 navigator loses days when turned off

    Hi
    Whenever i turn off my phone for more than a day, it stops keeping track of what day it is suppose to be.
    let say i turn off the phone on friday, and turn it back on sunday, it will show the correct time, but it will still think it is friday.
    this caused me to be late work work twice now, because when monday comes the phone thinks its saterday, and the alarm only goes of in weekdays.
    my firmware is up to date.
    is this a bug in the phone or am i timetraveling?
    Regards
    David

    i see this was answered in another thread : "Nokia 6210 Navigator - date change fails during night if phone switched off"
    looks like a bug that Nokia just doesn't care about fixing

  • E51 updated to 220.34.37 and 6210 Navigator to 03....

    Hi,
    New version released in NSU
    Nokia E51 goes to 220.34.37 and replaces 100.34.20.
    Nokia 6210 Navigator goes to 03.25 and replaces 03.28.
    Ciauz!
    Cellomania_com

    Hello,
    I experienced the same (trouble connecting to a WiFi Access Point), and some other strange behavior (unable to place telephone calls, several times) after updating my Nokia E-51 and restoring it's settings.
    My work-around: Re-apply the firmware upgrade, but do not restore the phone settings by use of the Nokia PC Suite. Of course you can restore all other items, like contacts, messages, files, etc. automatically. However, apply all phone settings manually, including Access Point settings. Since I know my phone better now compared to the moment I just bought it, this only took me half an hour. Of course it is a bit of an annoyance, but I am glad that everything is working fine again!
    I performed the upgrade because of some stability issues when using the phone in conjunction with the Parrot CK3100 car kit. I do not know whether these issues are resolved by this update.
    What bothers me most (not to be solved by a firmware upgrade) is that after only just a couple of months of use a lot of fine dust has found its way between the LCD-screen and its glass cover. Do you guys experience the same problem? Please let me know!
    Message Edited by urquhart on 18-Nov-2008 08:48 PM

  • 6210 Navigator Battery Issue

    Hi,
    I just bought the Nokia 6210 Navigator, and the problem is the battery drains too fast!!! It gives a talk time of less than 60 mins.
    What are the different things i can do to save battery???
    -Nelson

    I checked for running apps and found that there was an automatic packet data exchange taking place. I stopped it and changed Packet Data setting to "When available" instead "When needed".
    I also changed the standby theme to "Basic" from "Horizontal bar".
    The above two steps have improved the battery, but only by a bit. Its still way short of the 220 mins as per the specifications.
    The only apps running are Standby and Menu.
    How do I check if my GPS is draining power?
    -Nelson

Maybe you are looking for

  • How to use a cumulative value in a formula

    hi, experts I have a question about how to use a cumulative value in a formula. Below is the example:                         wk1   wk2   wk3   wk4   wk5....wk n sales order        5       10    15      10      5 build plan          8       8     10 

  • Error while opening the UCMON

    BCS and BI are on the same server. In UCMON,after I select the consolidation area and execute, I get a Data Model Synchronizer popup and when I click on the Individual or Full analysis monitor, I receive the error "DD_DDTYPE_TO_ABAPTYPE: Act. paramet

  • How do I make a still picture in Dremveave?

    How do I make a still picture in Dremveave

  • Batch Rename based on Content, is this possible????

    Hello all, I have a large amount of PDF files that I need to rename. The PDF files are contracts relating to individual companies and I need to place the company in the title. right now they are saved with numbers at the end: Contract_1, Contract_2,

  • Issues in EPM Add-in after installing MS Updates

    Hi, We have acknowledged of BPC EPM add-in problems after some MS Office updates. What we know so far is that this error occurs on BPC 10 NW version and it was delivered an SAP Note (2107965) with resolution/workarounds. On our system we have BPC 10