6215T Lite / MSI-6351 problem with Quick boot

Hi,
I was wondering if anyone else has this "feature"? When I turn on the computer ("Quick boot" is enabled in BIOS), the drives can't be found and boot sequence stops there. Then I reset with CTRL-ALT-DEL, all drives are found and computer boots normally. Drives are connected with separate IDE-cables and both set as "Master".
When I disable the "Quick Boot" option, the drives are found correctly after the memory is checked three times. This takes a long time with 512MB memory and I don't want to press ESC to interrupt the memory check every time computer boots.
I want to use the Quick boot option, but I don't want to use the CTRL-ALT-DEL workaround every time. Does anyone know why the drives aren't found in Quick boot and how could it be fixed?
Specs:
MSI 6215T-Lite barebone (MSI-6351 mb, bios v2.0 (A6351IMS.200))
1.1GHz Celeron Tualetin
512MB SDRAM pc133 CL2
100GB IBM HDD (Primary Master)
Sony 1621 DVD-Rom (Secondary Master)

D-led bracket explained here, https://forum-en.msi.com/index.php?topic=66922.0
Or better yet, here, https://forum-en.msi.com/index.php?threadid=34535
The 2nd page has graphics of the d-leds, if numbered as 1,2,3, etc from top to bottom, which ones is yours? This one?
Testing onboard memory size. The D-LED will hang if the memory module is damaged or not installed properly.

Similar Messages

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

MSI FX5600XT problems with agp 4x and other stuff

Well
I just bought myself a MSI FX5600XT-TD128
I had a Hercules (guillemot) GEFORCE2 PRO (clock higher than GTS and slower than Ultra).
I'm not sure if my previous videocard (the gf2pro) would run stable @ 4x or run @ 4x at all.. I know my motherboard is capable of agp 4x, the old videocard I am not sure it was..
WEll, I bought the msi, plugged in and no post.
so I take the card out, put it back in, posted... 5mins later, crash..
No post..
So I put the old videocard in (gf2pro) and disable agp4x in the bios, plug the msi back in and running so far stable...
My motherboard is an IWILL KK266 (via kt133a).. very nice motherboard running on a not-so-compatible-with-it athlon xp 1600+ (1.4ghz)
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
Well my question is, is the agp 4x problem related to this msi video card in general, or to a faulty video card I *might* have (so I can exchange this one) or is it related to the motherboard???
Also, can someone explain to me the diferences between FX5600, FX5600XT AND FX5600 ULTRA?
Also, explain to me please the 'V,T,D,R' models differences too?
And Last but not least, what is the best driver for the fx5600xt and winxp??
I'm running msi latest (53.03, I installed it just to test em), I had nvidia's 52.16 prior to that.
Thanks for all ur help

Quote
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
This can also be from a weak PSU, which would be even further taxed by adding the power hungry FX card.
Might need a stronger PSU.

Problem with quick look since 10.7.4 upgrade

Hi,
So ever since upgrading to 10.7.4 I've had a couple of new issues with quick look.
1. Often when I first open quick look the file doesn't preview but opens only a grey square where the file "should' be. If I close quick look and open it up again it works fine. This is more a nuisance and not my real concern.
2. The biggest problem seems to be relegated to pdfs: If i open a pdf in quick look and arrow up or down to search through a group of documents the heading changes file names, but the content of the preview stays on the first document I opened.
Anyone have any suggestions or experience this problem as well?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

MOVED: MSI CX623 - Problem with RAM and setting the primary board

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=167930.0

You should try a different mem slot. Say for example 0 and 2. There have been issues with DDR slots and all different types of mobos. Like I have a Shuttle Ak31v3 mobo with 2x256DDR2100 Kingston and the chips will only work on slots 2-4 and 1-3. It will not boot if I tried any other combination. It's a pain in the ass but thats just how it is. I had this same problem with a Asus A7V266.
I don't however have that problem on my Kt3 ultra 2 R mobo.
Madd

GT70 Dominator Dragon, Problems with Quick buttons ( Help)

Hi my friends, first sorry my engliash its really bad.
Have a little problem with the quick buttons of my GT70 Dominator Dragon. Have a moth with the Pc and I really love it, all work fine but when I update the Pc some quick buttoms stop working.
where can find the new drivers? of how I can fix this??
Here a photo with the problems
Ty all and sorry again

EC reset only needs once, just by removing the battery and the AC adapter and wait for few minutes then plug the AC adapter back on and restart the system.
If you have pre-installed Win8.1, then the first video button should have Power DVD 10 running after pressing. (Only if you don't have the Power DVD software, then it'll show the windows media player.)
G buttons will only work if you have the application installed.
Display off button, G button and the video play buttons will need the right EC firmware and the SCM drivers (plus the right application installed)
Check if you have the latest EC firmware in BIOS menu. (Press Delete button after MSI logo shows up during the bootup to enter the BIOS menu> Main> System Information> EC version)
Full color backlight keyboard (516) *check your current version and make sure after update, the version name is also starts with the same number 5XX.
http://dl.msi.com/download_files/frm_exe/1763EMS1.516.zip

MSI Z87m problems with Realtek install

I cannot install Realtek drivers with this motherboard. Brand-new system with Windows 7. Intel I5 CPU, gigabyte gtx 780, 8 GB ram. All drivers updated, win 7 updated.
I have tried the drivers from the included disc and also direct from Realtek site. They will install but they will not work. Red Cross shows up on the volume icon anytime I try to open audio.
I have even tried reinstalling the OS twice. Makes no difference.
I tried installing the Realtek drivers from SafeBoot. I just get an error message.
Creative Sound Blaster cinema will also not work because the RealTek drivers don't work.
I have read a few other posts of people having this exact same problem with this motherboard and Realtek drivers.
The windows HD audio will work.
Right clicking on Realtek properties in device manager shows everything is working fine, even though it isn't.
I have also had problems when booting into the bios. If I try to change anything, like a fan setting, and then try to save and exit, the system freezes. I had to CMOS once already. Pc also freezes in the bios when trying to access the hardware Monitor option, requiring a reboot. The other options work fine.
I've written to MSI about this problem but I was hoping somebody might have an idea of what I could try before I take the system back to the store for them to check it and replace the motherboard, as I will then be without the PC for a week.

What xmad is trying to get as information is the 'complete' name of the mainboard. Z87m is not good enough. Also, more information about the other systems components including specifics of the RAM, brand, rated speed, and the PSU brand and description. For now, test with just a single RAM stick.

Problem with quick mask selection appearence

Hi,
I am having a problem with the quick mask view (red) selection. When i press the \ key to see the selection i get a red rectangle in a random place of the screen instead of the red selection. Before the last update i had no such problem. Any solution to this ?
I am working on 64bit cc version Win8

No I tried to disable the Graphics Processor but no result. It is as it tries to aply the mask but crushes. if i leave it for about 10 sec photoshop crushes also...

Problems with re-boot after new OS X update

I installed the OS X update this past weekend on my MacBook Pro. Since then, my computer freezes and has benn running uncharacteristically slow. Re-boot takes nearly 30 minutes and the computer gets really warm. I've had this computer for 2.5 years and have never had a problem with it until now. I'm in grad school and this computer is my lifeline at the moment. I've tried running disk verify but it hasn't really worked. Please help!

I have the same problem - I'm afriad it seems to be yet another Apple "issue" which they pretend doesn't happen. There's a thread here on it - Re: USB keyboard doesn't work on Thunderbolt display .
I haven't tried their solution, though I would be surprised if it worked!

Msi-6163 problem with geforse 4 mx ddr

Hi
can u help me ?
I buy new grafics card : nvidia geforce 4 mx ddr
I have motherboard: MS-6163 ATX BX13 - pentume III 600E on win xp.
I have problem that my mainboard not identify my geforce 4 mx card on the AGP slot and the bios alarm me.
I try on difrent mainboard, not msi and it's working.
I try another same card of geforce 4 mx and it's not working too.
I do upgrade to my award bios from msi site and it's not fix it too .(w6163v56)
my old video card working on the slot of the AGP.
what can I do?
maybe it's a intrupt problem ?
10x
Yaniv

Welp I change the geforce 4 mx with ati radeon 9000,
and I got a lot of problems with a conflict, but I fix it and now evreting is working
10x to u wonkanoby

Problem with quick entry autofill for Things application

I use Firefox as my standard browser and the application Things for my task management. Until recently I could easily use the quick entry autofill function (ctrl alt space) to copy a link to a task in Things. This suddenly stopped working. I contacted Things support, thinking it was a problem with their application, but it appears Firefox is the culprit (that was found in the output from my Mac's console and I also found that in Safari the shortkey still works). I am updated to the latest version and would really like to keep using Firefox.
This was the output from my Mac's console:
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorMessage = Firefox got an error: Can’t get «class curl» of window 1.
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorRange = NSRange: {118, 12}
27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorBriefMessage = Can’t get «class curl» of window 1.
27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorNumber = -1728
27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorAppName = Firefox
I hope you can help me fix this problem.
Kind regards

The bug I found about Apple Script changing the read/write permissions of api was a dead end and looks like it is till waiting to be worked on [https://bugzilla.mozilla.org/show_bug.cgi?id=608049]
I am sorry I do not have any updates on this issue at this time.

Problems with quick time and phone

hi guys
im having problems with my quicktime media player where if i want to open or play a movie it says it doesnt support the file but if i open it up on a different media playr such as vlc it does.
also this problem arises as ive got a new mobile phone which is the k800i model which is only compatible and opens up movies in quicktime player only but when i download them on to my phoone they wont open saying error.
can anybody help me out coz ive just bought a momoery card for my phone and i would like to put some vidoes on it but it wont let me.

The printing software doesn't use Java (in any way). It does require QuickTime but version 10.2 is installed on your machine.
Maybe it wants an older version?
http://support.apple.com/kb/DL923?viewlocale=en_US&locale=en_US
QuickTime Player 7 installs in the Utilities folder and you can use both versions on your machine.

Problem with dual boot after upgrade to Mountain lion

Hello Every One,
I have a Macbook pro from 2009 which had dual boot option Windows 7 + Snow Leopard.
The windows 7 had 2 partitions (C; and D: an extended partition).
I upgraded the OS X to Mountain lion. after upgrade the system showed 3 options at boot time. Mac, Windows and a recovery partition.
when i boot to windows the D: drive is gone...I mean even though i can see the partition in partition software, windows 7 stopped showing D: in "My computer".
So i used testdisk utility to get the D: drive back and now when i boot to mountain Lion i am able to access both C:(BOOTCAMP) and D: drives.
but now the problem is during boot time my Mac Book pro doesn't show the windows option.
Can some suggest a means to boot into windows 7? Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it so that i can go back to my old configuration of 3 primary partitions (1 for windows 7 ...C: bootcamp + MountainLion) + 1 extended partition for D:
any help would be appreciated?
Regards

Ragu79 wrote:
Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it
Leave it: http://support.apple.com/kb/HT4718

MSI 180 - Problems with Media center III

Hey,
I have a problem with the Media Center III. When I want to watch TV I have to make a automatic scan in both Cable and Antenna. It seems that nearly all of my channels are found under the Antenna scan (strange I have Cable).
Well my problem is that eventhough I set the TV source to Antenna every time the Media center III software have been shut down I have to go into TV -> settings -> change the TV source from Antenna to Cable and back to Antenna to get the channels.
Anyone had the same problem.
Please help, how do I get the software to remember the settings......
best regards
K. Brinkmann

<FONT face=Helv size=2>
Some of the Jet and MDAC files of your operating system may be corrupted. Use a MDAC repair tool from
http://www.macropool.com/en/download/mdac.html
The above tool has fixed the problem of MediaSource's corrupted database problem for many users. You may want to try it.

MSI N260GTX Problem with driver or...?

I installed a MSI N260GTX today on an Asus PQ5 P45 mobo. After installing the drivers from the CD provided with the graphic card, my Windows XP went into 4-bit colors. I tried various of other drivers, but the same problem occured.
I am going to try the grap.card. on another system tomorrow, but can you tell if the problem is with a busted G.card, busted mobo or some other issue?

Boot in "Safe Mode" then use Driver Sweeper { http://downloads.guru3d.com/download.php?det=1655 } to remove current drivers.
Then reboot to normal mode and install latest drivers, depend of your OS version:
32bit XP ==> http://www.nvidia.com/object/winxp_178.24_whql.html
64bit XP ==> http://www.nvidia.com/object/winxp64_178.24_whql.html

6215T Lite / MSI-6351 problem with Quick boot

Similar Messages

Maybe you are looking for