6220c - Wrong time & date

Hi,
after updating the firmware to 3.46 on my 6220c it changes time and date by itself - everyday! Never had such a problem before. I already did a hard reset, but that didnt change anything.
All i do is to set the alarm and turn the phone off before i go to sleep. The next morning everything seems to be fine, as the alarm goes at the right time. But as soon as i turn the phone on the date jumps like 10-15 days forward and the clock is always +1 hour ahead. This is getting really annoying....

...*push*...

Similar Messages

IPhone 4s text messages - wrong time / date

Hi all,
My iPhone text (BOTH sms and iMessages) are showing the wrong time and date.
EG. Got a message at 16:00hrs today and it is showing Saturday for the date and time... But when I open the message up it shows 28 Dec 11 16:00 but then when I got back to messages it showing Saturday.
This is the same for text and imessages
Help anyone ? Please
Cheers

I have Verizon and it happened yesterday in Denver.
I believe when the time/ date source goes bad (yesterday my phone changed to April 22 2014 on February 4th 2014. When the time goes bad iMessage shuts down due to the time error mismatch with the server.
I set the time/date/time zone manually and iMessage would connect again.
Today I switched back to set time automatically and it was working again.

Wrong Times & Dates on calender

I hope someone can advise, when ever I sync my iphone to my mac laptop the dates and time are wrong. Some dates are on a different days or are different time to those that I put in. Please help it's very frustrating especially for reminders.

I have been having this problem, also, so I am hoping someone can answer this, too. I have had several changed, but the biggest problem is it is moving the times an hour later on my phone. I think this started when the time changed, but the time is correct on my phone and on my computer both now, and they are the same. When I sync (with Outlook) the times are correct. They sync, but they are all one hour later. Help!!! This is a real problem!

WHY DOES PHONE DISPLAY WRONG TIME ,DAY,AND DATE

HOW TO FIX IPHONE SHOWING WRONG TIME DATE DAY?

Check Settings > General > Date & Time > Set Automatically & Time Zone.

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Wrong file date on time capsule

Hi every body
When I copy a file to time capsule the file will have a totaly wrong file date.
What is there the problem?
Cheers Andy

Hi every body
The issue is solved. I recognized that I don't have the problem from my macbooc. So I restarted the imac. And the issue was solved :-).
Cheers Andy

Date Book data transfers to wrong time

I'm transferring Palm Desktop 6.2 user data from my new 64 bit Vista laptop to my 32 bit Vista desktop for the first time, and the Date Book info transfers to the wrong time - all meetings are 8 hours late. I think I have a screwy installation on the desktop. I've uninstalled and re-installed the program many times, and consistently get the time problem plus:
- " version (unknown)" in the About dialogue
- " invalid configuration. terminating the Palm Desktop" message when I run the program after installation (a re-run of the installer in repair mode fixes that)
- and no response from entries in the Date Book when I change my time zone.
I've used the 4.0.1 version of Palm Desktop for years, and had to uninstall it (after adding PalmDevC.dll to System32) to do the V6.2 installation. It smells like a registry problem to me, but I've got no experience fussing in that neighborhood. Any help would be greatly appreciated
Post relates to: None

Sorry but I led you astray.. I am not familar with that seagate.
The internal format of the disk drive is not actually relevant. I did not realise you had it setup as network drive.
Network drives present to the network in SMB ie windows type format or AFP type format. Unfortunately there are some issues with SMB and mountain lion. And if seagate does not support AFP which is very likely that can be one factor at least in it being slow. Just do a google for SMB mountain lion slow and you will see what I mean.
It is not universal and it should have been fixed but Apple changed something in ML and some other devices .. especially those not purposed specifically for Mac have not updated.
But there can also be network issues.. these things can be a pain to narrow down.
Things seem to play fine from the TC, except one weird thing. Some movies play but have no audio. The same movies, playing from my MBP reading from the TC play fine with audio. But when streaming through home sharing on an ipad, no sound.
This has nothing to do with the TC.. as you probably realise you are trying to break out of the Apple Walled Garden.. itunes and itunes store.. and hence you run into problems is not surprising.
I can play files just fine from a TC but I use a WDlive TV player.. which is a real media player.. not a streamer like Apple TV.

Run time data binding via FormCalc/JavaScript+wrong text formating

Hello Everybody
I need to print a text block with company details depending on company code (different details for different codes). I tried to use this code for event "calculate":
if ($record.LS_HEADER.BUKRS == "1000") then
$ = $record.COMP_DETAILS_1000
elseif ($record.LS_HEADER.BUKRS == "1000") then
$ = $record.COMP_DETAILS_2000
endif
$record.COMP_DETAILS_1000, $record.COMP_DETAILS_2000 are elements from the form context which are linked to textmodules.
This code works and it prints correct textmodules for different company codes. But the printed text is not formated like text in the textmodules. The most important thing here is that these texts are always printed as a single long string and I need paragraphs like in the textmodules. It's a problem... If I use a statical binding (without FormCalc programming) the text modules will be printed with correct formating.
Using of checkbox "Allow Multiline Lines" hasn't helped here...
Have you any idea how should I do the run time data binding?
Thank you very much in advance!

Hello,
the important part is "If I use a statical binding (without FormCalc programming) the text modules will be printed with correct formating." That means you can get the text in the shape you want. Just do that. Get all the texts. Next use the JS/FC scripting to hide all but one text. You get only one text to display and you use static binding to get the proper text format.
Hope this helps, Otto

Recents - Call Times Data Wrong

I just noticed that the call time data in Phone "Recents" are incorrect. A call received at 2:00 PM is listed as 8:00 PM. Computer and iPhone are correct and set to correct Time Zones. All software is newest version. How can this be fixed?

I just noticed that the call time data in Phone "Recents" are incorrect. A call received at 2:00 PM is listed as 8:00 PM. Computer and iPhone are correct and set to correct Time Zones. All software is newest version. How can this be fixed?

Time & date wrong after sync

Every time I connect my iPod Touch to my PC to charge at & sync it, It will lose the time & date settings stored. The time on the computer is right, however. Is this a problem with my iPod or something else? It is about 6 months old (I think), and this started about 2 weeks ago.

You can visit this link for a possible solution.
http://discussions.apple.com/thread.jspa?messageID=7701887&#7701887

My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase.

MPX 2.1.1.2 - Wrong time in e-mail notification header

Hi,
when I schedule a meeting withMeeting Place Express 2.1.1.2, everobody recieve the notification for the meeting but the e-mail is coming with wrong time in its header(as shown in the attached file). The date seems to be set correctly but the time is always 00:00.
Meanwhile the schedueled time in the e-mail body is correct, as I've specified it.
The date and time on the server and the application are correct.
Any ideas what can be the problem?
Regards,
Vladimir Stankov

Thank you very much for your reply, Jonathan.
I suspected it was a bug but couldn't find it. Any chance you can give the bug ID?
Anyway I will contact TAC on this matter.

V12 Panorama: Wrong time - Please make it easy to use the Organizer

When performing with V12 my first Panorama Merge, the resulting panorama Merge got the wrong time assigned (in V8, I did not encounter that problem). With V12, the two source jpeg photo files that were merged into the panorama have a timestamp of 4/5/2013 12:59. However the resulting panorama jpeg file has a timestamp of 4/5/2013 10:59. This result in one additional manual operation, that i must perform after completion of the Panorama Merge: I must correct the time.
I am not sure how that time difference of two hours happened. Is it because I am in Switzerland, where we have still the Summer time and are ahead by two hours from Greenwhich Mean Time?
I have a kind request for the next Version of PSE: avoid to make it difficult and painfull to use the PSE Organizer in conjunction with Photomerge Panorama. Today, without technical reason/merit, use of the PSE Organizer in conjunction with Photomerge Panorama is extremely painful and inefficient. For each result of a Panorama Merge, I have to do all of the following and that is very inefficient (especially with large catalogs) and painfull:
I must find within the Organizer bin the result of the Photomerge (to do that, I typically need to switch the Photo Bin into Import Batch sequence...and then later on switch back to a more reasonable sequence)
I must verify and then correct manually the time of the resulting photomerge file
I must determine which tags were assigned to the individual component/source files, navigate within my large Tag structure to find the tags, and then assign manually to the photomerge result the Tags of the source photos
I must deternmine in which Album(s) the individual component/source files were included, navigate within my large Album hierarchical structure to find the Albums and then include manually the photomerge result into the same Album(s) as the source photo. Then I have to move the photomderge result to the right location within Album Sequence.
I must make sure, that the resulting jpeg file is stored in the same folder as the source photos.
All that is a real horror. I am sure, that all opf us (both from Adobe and from the PSE fan community) want to make it easy to use the Organizer.
Ideally, I would like to have (one? or multiple distinct/selective?) sticky options (in the Photomerge dialog pannel? in Preferences? at another location?) that would do all the above automatically for me.
Of course, I understand, that other PSE users will sometimes not like (as I also sometimes do not like) to have the same tags/Albums associations for the resulting photofile as for the compoenent/source files. But It is so much easier to remove selectively one or more Tag/Album association from a photo then to search a large Tag/Album Hierarchy for the correct Tags/Albums and then associate these Tags/Albums with the Photomerge Result.

Michel, Thank You for your answer.
Hopefully, Asobe development will make a distinction between:
- "missing functionality" (the alphanumeric sort which wes mising in V11), that requires new/additional code
- and "bugs" that are important (because in this case, the bug results in a Timestamp related dis-organization within the PSE Catalog) and can hopefully be fixed relatively easely.
Since the "date problem" that I had encountered orginally while performing a Panorama Merge is a general problem that is not related to Panorama Merge: for the date problem, I will open another Thread.
To come back to your excellent "suggestion" related to Photomerge Panorama: it is my impression that based on your idea/suggestion, the problem could be relatively easely fixed in V13.
To simplify a little bit: when performing a Panorama Merge, the Editor could record somewhere internally, the Identification (e.g. Filename and Foldername) of the Photos that are used as input for the Merge. And when later on, the PSE user performs a "Save As" or a "Close" of the resulting panorama, the Editor could offer to the user the option to save the Panorama File within a Versionset.
- in the simplest implementation: the Editor would choose without asking any question with which one of the Input Files the result should be saved into a Versionset
- in a little bit more more luxurious implementation: The Editor could ask the PSE user with wich ones of the Input Files the result should be saved into a Versionset
The PSE user, could (if he wish) later on remove the Panorama Merge from the Versionset. That Is easy and fast to do.
Of course, thanks to Michel, I have now an excellent Workaround. Myself do therefore not need an "official" solution in V13. But I nevertheless believe that a lot of other PSE users will not be aware of the suggestion of Michel and will therefore waste a lot of time for a proper "organizazion" of their Photomerge Panorama. It would be great, if PSE would complement the outstanding Photomerge Panorama support of the Editor with a good and simple-to-use/simple-to-understand support of the Panorams within the Organizer

Nano World time displaying wrong time!!

I just got hold of my ipod nano this morning. Was so looking forward to it till i found out later on that it wouldn't work with my 3rd party USB2 pci card. That was fine, i just used USB1.1 which took really really really long.
Finally, when it was done, i got to fiddling with it. I toggled to the World Clock and thought it'd be cool to fiddle with it. What i found was that the world clock is displaying all the WRONG times. I'm currently in Perth, Australia which is +8GMT. The ipod's main clock and date are all set correctly, and timezone set to Beijing, which is +8GMT equivalent.
But, when i get the world clock feature to display with my time, it displays 7AM (the real time is 3PM). It's the same with the other regions/times as well. Anybody else have this problem?
Hope somebody comes up with a fix
Thanks!

First, u pop the CD that came with the nano into your computer. Then, you locate the ipod software updater. Just launch that program, click and restore and follow the on scree instructions.
You should be good to go after that

6220c - Wrong time & date

Similar Messages

Maybe you are looking for