6230i being used as a modem on a mac

i want to use my 6230i as a modem on my mac and i'm not sure how. can any one help me?

Hi begis_danis
It might be worth visiting this site, just scroll down the page to access Nokia Script information.
http://home2.btconnect.com/Taniwha/
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • My apple ID is now being used for facetime on a new mac. I have no new mac

    Hello
    My apple ID is now being used for facetime on a new mac. I have no new mac

    If you recently did an upgrade to Yosemite (and if my memory is correct) you may have signed into FaceTime (without using it) as part of the upgrade.

  • Which phone to be used as a modem for a Mac OS X 1...

    Hello !
    I'm french, and I live in France... so sorry for my bad english.
    I want to buy a new phone... not expansive... I want a phone that can be uses as a modem with my Mac OS X 10.4 (I have to travel several monthes in central asia). Which Nokia, or which Sony ?
    I read a lot of things about I sync, but I don't understand the meaning... if a phone's in the list of I Sync, is that phone can be uses as a modem or not ?
    I hope somebody will be able to help me to chose... Thank youy !

    I'd be talking to them.

  • Which mobile phone to be used as a modem with my Mac ?

    Hello !
    I would like to buy a new phone (Nokia or Sony... and not expansive !). I'm looking for a phone that could be a modem for my Mac, when I will travel in central asia.

    I'd be talking to them.

  • Using a Bluetooth modem and mouse together?

    After much messing around I'm now able to use my T-Mobile Motorola W-490 as a Bluetooth modem with my 500MHz dual USB G3 iBook through a Bluetooth USB dongle. I'm using it to post this message actually. For some reason it won't work without Bluetooth, using just a USB cable to connect the computer to the phone. I guess I can live with that.
    My question is, why can't I use any other Bluetooth device, including an Apple wireless mouse, or even the flash drive inside the W-490, while the modem is connected? Is this normal? When the phone isn't being used as a modem I can use its internal flash drive and a Bluetooth mouse together at the same time. My Bluetooth dongle is Bluetooth 2.0 even though the other devices are Bluetooth 1.0 I think (?) I'm new to Bluetooth, so any help would be appreciated.

    You need a Bluetooth dongle or built in Bluetooth. I couldn't get it to connect through a USB cable.
    Call T-Mobile and subscribe to their additional $20/month internet plan.
    Wait a couple of days for T-Mobile to turn on the internet on your phone.
    Download and install the "Motorola 3G CID1" modem script so Mac OS-X will recognize the phone as a modem.
    Make the phone discoverable to other Bluetooth devices.
    Setup the Bluetooth device with Bluetooth Setup Assistant.
    Setup a new modem in Network preferences.
    Show the new modem, and under the PPP tab set it to dial telephone number: "internet2.voicestream.com"
    Under Bluetooth Modem select modem: "Motorola 3G CID1"
    I'm sure I'm forgetting something. Write back if you have problems and maybe I'll remember more. You can call T-Mobile and ask for their Mac technical person. I shut off T-Mobile's internet service because it wasn't worth the extra $20/month to me. It's faster than a dialup modem when used as a modem to allow a computer to access the internet. The W490 phone used by itself to access the internet is unbelievably, mind numbingly slooow. (pulling hair) I'll probably have T-Mobile turn the internet back on when I go visit my mom, who doesn't have any internet connection at all. I'll shut it off as soon as I get back though. It'll make a nice way to get e-mail without driving down to a cafe with wireless. If you travel a lot this might be an affordable way to get your e-mail. It's much more affordable than a dedicated 3G modem, but it's also much slower.

  • Telephone will no longer let me use my PC modem to...

    Hi NO one at BT has been able to help me with this,
    OK explanation:
    For my work I still use the old modems to dial into remote machines (this caused problems explaning this to BT they kept on talking about my BB hub!). Using an internal modem in my laptop to dial out using the voice part of the BT line.
    You can here the tones of the numbers being dialled, it then handshakes with the modem on the remote machine then the signal just hangs.
    I have had my phone line for over 8 months. I have been able to use modem remote connect the whole time until last week.
    I completed a line check, came up clear. I then called BT. Line check clear. They said the only option is to have an Engineer sent out. Then I got told that it could cost me... etc.
    So booked an engineer then hung up. Got a call 30 mins later... ( during the 30 mins from hanging up I started to fault diagnose the lines in my house) then got told they had done another line check and it now shows a fault! Will it would I was using the line and fault finding on it!! They didn't tell me that they would do another line check.
    Anyway engineer came following day... guess what no lne issues in my house or outside. After 15 calls and 6 hours later I was getting no where on the phone.
    How can I get this looked into!?!?!? It seems the bandwidth on the voice part of the line can't take modem data anymore!
    I have tested my laptop, it works on my lines in 2 different offices it also works at a friends house and they are on BT.Line quality sounds fine on voice calls and BB never drops out.
    1. Why has this stopped?
    2. Why can't BT have a higher level of tech support?
    3. Why just cold transfer me to other departments?
    4. Why send out an engineer when there was no need for one?
    5. Why does the Tech guy I reported this to tell a blatant lie on the system on my records. "noise on phone line" I never said this!!!
    6. Who can I complain too? NO ONE!
    7. How can I get this resolved? NO ONE KNOWS
    All I want is the capability to dial out using pulse dialling via modem again! FROM MY OWN PROPERTY.
    CAN ANYONE AT BT HELP?????

    Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
    Can you try the modem plugged directly into the master socket without any ADSL filters. You will lose your broadband connection during the test, but it will eliminate any problem with the BT Home hub, or the microfilter.
    ADSL does not start until 30kHz, which is well above the range that an analogue modem works at.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Can't use my USB modem "HUAWEI model E156G" on my MACBook Pro

    I'm new to MAC (I used to be a windows user) and I'm a little bit frustrated for not being able to use my USB modem "Huawie E156G" for connecting my new MacBook Pro!
    I followed these steps:
    Got the USB modem drivers found on Huawei site that should support my USB modem model. there were 2 drivers, one for "Intel" and another one for "PowerPC" platforms
    First, I installed the "Intel" version succesfully. According to the steps, I tried to run the installed driver, but I got the following message:
                    "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported". 
    I repeated the installation procedure using the "PowerPC" version that finished succesfully (without removing the previous installed driver because dont know how to do that). I got the same message when running the driver application:
                     "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported".
    It would be much appreciated if anyone can help me
    Note: my MAC OS is MAC OS X Lion 10.7.2 (11C74), Processor Intel Core I5
    Thanks

    http://pasamio.com/2011/07/22/getting-your-huawei-modem-working-with-mac-os-x-li on/

  • Some of these services may be being used for hacking my Time Capsule?

    Hi,
    I was scanning services from a connected PC on my network but not directely in my time capsule and I picked these services below:
    NetBIOS Session Services
    SMB directy over IP
    AFP over TCP
    Apple Airport WAP Administration
    SecureNet Pro Sensor https management server or apple airport admin
    My question is: Some of these services may be being used for hacking my Time Capsule?
    Attached SIMPLE DESIGN FROM MY HOME NETWORK,

    Ok the TC did seem to get the raw end of the deal.. (I am not sure what the other end is.. cooked maybe??)
    What model is it.. Gen1 or Gen2 are very prone to issue of overheat and eventual power supply failure.
    See internet for loads of info on the issue.
    Here is my version.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    You can open the TC and remove the disk.. if it is still operational you can get your files.. Gen1 Hitachi drives are still going strong.. it is the power supply that goes.
    Gen3 is a different issue..
    Tell us your model number from the rubber foot label.. A1xxx??
    Decide if repair is worthwhile.. with a bit of DIY a repair or replacement to the power supply can be made.
    There is no space in the TC for dual drives.
    And if the power supply goes anyway there is no recovery apart from pulling it apart.

  • Can you see which timeline clips are being used in Media Browser?

    I'm a relatively new user and may not be familiar enough with cs5.5 but
    is there a way to see what clips are being used on the editing timeline in the media browser.
    I open premiere pro - Project is loaded. I edit the scene until it is finished.
    When I look over at the media browser, all my raw clips (some of which I'm
    using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
    The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
    media brower folder where my raw clips are located - easily see which ones I'm using because they
    are highlighted or checked and then delete the ones I no longer need.
    Is there a way to do this now?
    Thanks
    Jeff

    I dont think so  but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip.  You can click on them to go to them in the timeline.

  • Materialized view not being used in the report

    I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

    The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
    You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
    Regards
    Abhinav Agarwal
    Oracle Business Intelligence Product Management
    http://www.oracle.com/bi
    http://www.oracle.com/technology/documentation/bi_ee.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
    http://oraclebi.blogspot.com/

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • New to FiOS, can I use my own modem and router

    I saw several questions similar to mine, but none that I saw answered my question for my scenario. I am sorry if this is a duplicate. I am new to FiOS. I have no other services from Verizon and do not plan to get any. No phone, no television, nothing. Just Internet. God willing, the installation will take place in two days. My house already has coaxial cabling. I have my own cable modem, a SURFboard SB6121, which goes to my router, a TP Link TL-WR941ND. None of my equipment advertises that it is FiOS compatible. I've seen other people asking about using their own modem and router, but in those cases the scenario involved other bundled services, and I understand a FiOS router is necessary to forward ports to television, phone, and computers. However, in my very simple scenario, can the Verizon optical network terminal simply feed its output to my coax, from there to my modem, then router, then comptuers? Is there any reason that wouldn't work? Verizon technical support just gave me a machine that wanted to help me troubleshoot my Internet connection, and I couldn't get from there to a human. Thanks in advance for the help!

    Banish the word and the device called "modem" from your home when using FiOS.  FiOS does not use modems.  Your cable modem is useless with FiOS.  Do not plug it in. FiOS uses routers.  The router connects to the ONT's WAN port using MoCA (coax) or Ethernet.  The installer will enable one of the ONT's WAN ports.  If you order 150Mbps or higher speeds, they will have to use Ethernet.  For slower speeds, coax is the default.  Many installers will use Ethernet if you ask nicely, but usually only if it isn't too much work.  Make sure it's easy to connect a router to the ONT using Ethernet, and you should be okay.  If Ethernet needs to be run through the walls, your best choice is get it done ahead of time.  You can always call later and get the ONT's WAN port switched. The only routers available with a MoCA WAN port are the Verizon models.  The Verizon routers are good devices for most users.  People who like to tweak their networking gear don't like them as many advanced features are limited or locked down.  You can't run any other router firmware on them.  WiFi range is decent, but not great.  I'm quite happy with my Quantum router.  YMMV. If you get Ethernet WAN enabled, you can use any router you want.  However, know that Verizon provides zero support for any other router.  They won't even mention it as an option.  That doesn't mean you can't use one, simply that you must do so without Verizon's help. There are reports that they won't even complete an install without one of their routers to verify service.  If you don't use one of their routers, consider renting one for a month to complete the install or even buying a used one.  If you own a Verizon router, you can install it if you ever suspect Verizon networking issues.  This will allow you to call their support. This FAQ is very helpful:http://www.dslreports.com/faq/16077 Good Luck. 

  • What JVM is being used in my Internet Explorer ?

    I have a web-bases/java-bases application that does not work when JRE 1.4 is active.
    I disable it for Internet Explorer in the Java Plug-In Console on the Browser tab and then things work fine.
    How do I know what JVM is being used then ?
    Some configuration info :
    WinME, IE 6.0, JRE 1.4

    When you install JRE1.4.0, it asks if you want to link the JRE to IE and Netscape 6...if you answered yes, what it does is to create and automatically select a new option box in IE (see Tools-->Internet Options-->Advanced-->Java Sun-->Use JRE1.4.0...) -- if you elected not to link the JRE, the option box is not created.
    Without the new option box, IE works like this:
    1) Unless the applet has been converted with the HTMLConverter that comes with your SDK, IE will run the applet with its native JVM which is version 1.1.5.
    2) If the HTML file has been converted, IE will check to see what version of the JRE is required and what is already on the system. If a different JRE is required, it will prompt the user to download the required JRE and then run the applet -- if the user doesn't want to do the download, the applet will simply fail to start.
    Hope this helps!
    ;o)
    V.V.

  • I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

    I have OS 10.8.2 and use wireless at home just fine.
    When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
    I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
    What do I need to do connect via a cable modem?

    You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

  • Apple IDI am trying to update my IPAD and it gives me a message when I put my email address in:The apple ID is already being used?? I set my Iphone up yeasterday and I only have one email address and one account how do I use it for all my devices?

    I need some help I set my IPhone up yesterday and now I am trying to set up my IPad but I only have one Itunes account and one email but the IPad error message states "The apple ID is already being used" I dont know how to get passed this and my family and I only have one account and we all have IPhones now I dont want them to update if we cant all use the same account. Please help with ideas!!!

    Try here:
    http://support.apple.com/kb/HT4895
    Apple IDs and iCloud)

Maybe you are looking for