6230i Bluetooth Connection to GPS

I cannot connect my 6230i to a Falcom NAvi 1 GPS. The Nokia see's the GPS but cannot pair to it saying security failed. The Falcom GPS pairs successfully to my Siemens 720 PDA. The falcom manual ( http://www.haid-services.de/assets/own/navi-1-user-manual.pdf ) says that a code of 1111 is required if a secure connection is selected which I tried.
It seems that the falcom will work without a secure connection however it appears the Nokia does not support this.
How do I get the two to communicate!
PEter Merle

Did reset the GPS. Tried using an older Nokiaof my friends and it actually completely resets when trying to establish a connection with the Falcon GPS!. Shows you that Nokia software skill leave a lot to be desired. I suspect Nokia conlu works with a secure connection to any bluetooth device and the gPS does not allow secure connections.
PEter

Similar Messages

  • 6230i Bluetooth connectivity problems

    Sorry for long posting...
    I have recently purchased a 6230i to replace my 6310i.
    I previously used a CA-42 USB cable for the 6310i but that is reported by the 6230i as incompatible - grrh.
    And now I am trying to set up the Bluetooth connectivity.
    I have (eventually) managed to get the 6230i paired to my Laptop using a Belkin USB Bluetooth and the Belkin software running on WinXP (IBM T41 laptop). PC Suite runs but seems to be a little unreliable over Bluetooth - will address that by sourcing a DKU-2 cable.
    However, I have problems with pairing the 6230i with my Sony HBH-600 headset (works perfectly with 6310i) I can get the 6230i to discover the headset either by searching for audio enhancements or by setting up a new pair, however it always fails to set up the connection (never asks for passkey).
    Similarly I cannot get my Ipaq 5550 to pair with the 6230i. I can start the pairing from the Ipaq which finds the 6230i but the 6230i never acknowledges the pairing attempt which then fails. If I start the pairing process from the 6230i it finds the Ipaq and attempts to pair but never asks to setup a passkey - the Ipaq does not seems to receive the pairing attempt.
    I have set the auto connect option to yes and no with no difference.
    Any suggestions ?
    Needless to say all this worked perfectly with the 6310i.
    Tech. Project Manager
    Reuters

    Further to original post
    The Bluetooth connectivity all works between the IBM T41, Ipaq 5550, Sony HBH600 headset and a Nokia 6810 phone.
    So the problem appears to be the Nokia 6230i phone.
    Further research gives some rather disapointing information.
    http://www.geekzone.co.nz/content.asp?contentid=2629
    If you have problems performing pairing between an iPAQ 1940/2210 and the Nokia 6230 and continually get an error similar to "Cannot pair devices for security reasons" then it's related to the problem outlined in that document.
    This is a Hardware issue and not a software issue related to the WIDCOMM BTW-CE Product. There are two types of keys that can be used for pairing:
    - Combination keys
    - Unit keys
    The key type that is used is pre-set in the Bluetooth Radio Firmware. The WIDCOMM BTW-CE Bluetooth software
    does not control this setting. The radio on the iPAQ 1940 uses unit keys by default. These Nokia phones reject the use of unit keys in pairing because it is not as secure as combination keys.
    Users of older HP iPAQ models should check the HP Drivers page for the latest OS or Bluetooth software for their devices.
    I note that my Ipaq is older than the two models mentioned and that my headset is 16 months old. So it looks as if the 6230i is going back - stupid no backwards compatibility.
    thanks to Geekzone for the info.
    Tech. Project Manager
    Reuters

  • 6230i bluetooth connection

    Hey everyone,
    I got my 6230i for christmas and the bluetooth connection has been working fine, however recently my phone's bluetooh connection has not been working properly, I either have to keep restarting it or it just doesnt work at all. Please help!
    Thanx
    Faye x

    Contact your local Club Nokia Service Point for a free software upgrade which should sort out this problem!

  • 6230i bluetooth connectivity

    Greetings
    My bluetooth says that it is on but there is no icon in the top left corner. I have taken the battery out and rebooted it is now stuck on off. I also took the memmory card out and out it back again. I have been reading posts on this subject, so it seems a common problem. The bluetooth has worked intermitently in the past I am just not sure what series of keys I tried to get it to work. PTT may have something to do with this.
    *#0000# results in:
    Nokia 6230i
    v 03.70
    9 Jan 06
    RM-72 GSM
    P1.1
    (c) NMP.
    I have been to my service provider for help and a few other cell phone repair places but nobody seems to be able to fix this. It has been suggested that the phone is sent back to Nokia since it is 8 months old and under warranty but 6 weeks is too long for me to be without a phone. Any suggestions?
    Thank you
    Angie

    well, it does and it doesnt
    it all comes down to what your headet and your pc want to use.
    sosul is quite correct, the 6230i does not support multiple bluetooth connections. however, if you have two devices that require different profiles you may be able to connect.
    now maybe is a keyword here, the other is battery life - it will drop v fast.
    a lot of nokia's newer phones can support multiple connections though.

  • I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

    Hi
    I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
    Thanks for your input
    Felix013

    try a RESET ALL SETTINGS

  • Bluetooth connection problem with nokia 6230i

    Hi I am having troubles establishing a Bluetooth connection between my Nokia 6230i and my Dell Latitude laptop running on Windows XP SP2 when trying to use Nokia PC Suite. When using the nokia suite connection wizard it establishes a connection for a fraction of a second and then disconnects.
    The following information may be useful??
    Windows XP Pro SP2
    Nokia PC Suite 6.5.12
    Microsoft BT Stack 5.1.2600.2180
    WIDCOMM BT Stack 3.0.1 build 803
    Can any one help please??
    Thanks

    You could try uninstalling the Widcomm Bluetooth and relying only on Microsoft + PC Suite 6.6.18 from http://www.nokia.com/pcsuite

  • Bluetooth connection to car hands free

    i have a motorola car hands free kit installed with my old 6230i the connection was automatic but i now have a 5500 sport this needs to be re-installed every time i get into my van does anyone know why or is the sport a H.O.S

    If you try resetting your motorola car kit ( i dont know how) then pair your phone again this should work. also in your phone bluetooth settings see if you can change the motorola kit to automatically authuorise connections. It sound like the kit is still looking for your 6230i which needs to be deleted.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • IOS 8.1.2 car bluetooth connection

    I have lost the Bluetooth connectivity in my 2014 Hyundai Santa Fe since I updated my phone to iOS 8.1.2.  I have tried to reset car Bluetooth features as well as on my phone.  Nothing seems to work.  Is anyone else having issues and are there any solutions?
    tx

    Similar to VroomVroom:  I have iphone 5s, was on iOS7, went to iOS 8.1.2, and I didn't notice that I had lost a specific bluetooth connection: Garmin Smartlink - Live Traffic App.  The Garmin Smartlink uses bluetooth to connect to the aftermarket Kenwood DNX891HD I have in my car, this comes with a Navigation GPS included.  The Garmin Smartlink app (Live Traffic) provides immediate traffic updates if your city is covered, and my city Cincinati OH is covered.  This was all working fine before I upgraded the iOS on the iphone 5S.  I read another article related to "carkit" connections between iphones and car stereos (for both NAV and also hands-free) - here is the key point and my theory: Only ONE bluetooth connection can be supported at a time.  In my case - the hands-free telephone (thru car microphone and car stereo speakers) works fine, and I believe this is also "shared" by Pandora App (from iphone to Kenwood).  So, my theory is the iphone will not connect to the Kenwood for the Nav, since it is already connected to the Kenwood for the audio (Pandora and hands-free, I think these two "share" the same bluetooth connection, and I think the Smartlink connection is separate).  I messed around this morning in the parking lot at work, and my attempts to "forget" and "pair" the iphone and Kenwood would continously start playing Pandora, but the Smartlink still will not connect (when it dis work, I would see a green circle with two cars on my Nav map screen, indicating the smartlink connection and also status of the traffic).  My next test this afternoon will be to delete Pandora app on the phone, try forget / pair again and see if I can get Smartlink to work.  If this works, I'll reinstall Pandora App and try to get it back as well.  My past 24 hours of skimming articles (don't ya love the internet !) seems to indicate that I am not the only person with bluetooth problems due to the iOS 8.1.2 update....hey Apple...where's 8.1.3 to fix this ?

  • Macbook Pro bluetooth connection to iPhone 4.

    I just purchased a Macbook Pro (latest edition) and it will not establish a bluetooth connection with my iPhone. Keep receiving the following error: The bluetooth network is unavailable... I check the phone and I have the bluetooth turned on. Not sure what I am doing wrong. Any help would be appreciated.
    Thanks

    Unfortunately, although you can Pair the iPhone with your MBP it only offers a limited range of functions and you can't connect to it as a network device. Don't ask me why Apple have crippled it this way ...
    Mine connects happily to my GPS and two helmet headsets and, while it's been paired and shows:
    AVRCP Device
    Audio Source
    Handsfree Gateway
    PAN Network Access Point
    Phonebook
    PnP Information
    Service Discovery
    Wireless iAP
    It always comes up "Blutooth Network Not Available" when I try and connect.
    You should be able to pair if you run Bluetooth setup Assistant though ?
    If you're after 'tethering' i.e using the iphone as your Internet access then this is dependent on your ISP allowing/enabling it. On the iPhone open Settings/Network and turn Personal Hotspot On and it will show you the password for connection. On the MBP (System Preferences/Network) you will then see 'yourname's iPhone' as a connection option for your current location and you can enter the password there - but be aware that carrier data charges and plan limits will apply! My 2GB mobile plan data gets eaten very quickly this way.

  • Want to connect car GPS receiver to iPhone 3GS

    Hi,
    Getting a little tired with the unreliability of the iPhone 3GS GPS reception in the car so I wondered if I could connect the receiver that is already built into the car. I changed the head unit (the SatNav was pretty basic anyway) for a Pioneer that allows me to control and play music through the car stereo from my iPhone and also lets me make calls via Bluetooth. Is it possible to get a Y splitter that would also allow me to connect the GPS receiver to give me more reliable Satellite Navigation?
    Hoping somebody out there can help me.
    Steve.

    You'll probably get a proper response if you post in their help forum here:
    http://www.hanajobs.com/mobile/forums/show/13.page

  • Confirmation of connection to GPS unit required?

    A Garmin Nüvi 760 is bluetooth connected to my E71 phone.
    When connection is established everything works perfect.
    Why do I have to confirm the connection everytime I want to drive my car?
    On Nokia N73 a possibility in the bluetooth connection gave the choice - not to give confirmation of the connection, but just connect. Is that not possible on the Nokia E71 ?
    BR Jønne Denmark 

    Did reset the GPS. Tried using an older Nokiaof my friends and it actually completely resets when trying to establish a connection with the Falcon GPS!. Shows you that Nokia software skill leave a lot to be desired. I suspect Nokia conlu works with a secure connection to any bluetooth device and the gPS does not allow secure connections.
    PEter

  • C3-00 Failed bluetooth connection

    After quite a bit of fiddling around , I successfully got my C3 to connect reliably via Bluetooth and sync with Ovi. It's been working well for about a month ?
    I connected tonight and performed a sync and backup. Closed OVI..all looked good. A while later I wanted to re connect and the bluetooth connection failed saying the pairing needed to be  ' updated ' ? I wasn't sure what that meant , so I thought I would delete the pairing and re ad it.
    When I try to do that  via the phone , my computer shows up but when I try to ad it as a paired device , it fails.
    If I scan using the computer , the phone also appears in the bluetooth list , but when I try do connect I receive a 'generic ' error msg:
    Adding the device failed due to an authentication error. It might be due to the use of an incorrect pairing code......"
    I don't see a prompt to enter a pairing code ( as I did originally when I first connected successfully ). Not sure what to try next ? Will restoring my back also restore my pairing ,  or do I need to do a reset and start from scratch ?
    TIA

    21-Dec-200612:29 PM
    johno11 wrote:
    I have a Nokia CK-7W car kit, Nokia 6820 and Nokia 6230i. I can connect the 6820 to the Car kit, but i cannot connect the 6230i. An error message displays - 'Bluetooth Connection Failed'. I also seem to have problems connecting the 6230i to any other phones with Bluetooth.
    Is there any issues with the hardware or software on the 6230i that can be resolved simply?
    Regards,
    JC.
    I am having the same sort of problem with my carkit 112 and my 6310i when I try to pair to the car kit it says connection failed the phone will pair with other devices, other phones will not pair with the car kit. I have read the posts for resetting the car kit but nothing seems to happen
    thanks in advance for any help i get Almac120

  • TS2634 Bluetooth connectivity problems

    My bluetooth connected Garmin Glo Gps no longer works properly after updating ios. It showls the device is connected, but doesn't function when using moving map programs such as foreflight or garmin pilot. I'm using ios 6.1.2. It works with other ipads.

    Actually, it's the other way around: Bluetooth interferes with wi-fi

  • N81 Bluetooth connection problem

    Hi, I have the N81 8gb, I have only had the phone for two days but I am experiencing a problem when it tries to automatically connect to my Pioneer DEH-P85BT bluetooth car radio. It finds the phone, connects to it, then immediately disconnects, my Nokia E65 connects straight away with no problem. I have paired the N81 with the radio and set it as authorised, I have set the car radio to automatically connect to the N81 and registered the phone with the radio, but am still having the problem. Has anyone any ideas I can try to solve this problem.

    Well, I dont know but I remember thyat one person said that bluetooth became inactive when using the gps. I dont know is this may apply for your case but on somehow it seemed that there were a conflict between both of them.
    No I dont know if you are receiving the gps position via bluetooth from another device or are you sendind via bluetooth from a gps on the same device.

  • Bluetooth connectivity again....

    I add myself to the list of people having trouble with their Bluetooth connection.
    I haven't been able to solve my problem by scanning throug this forum.
    I can't connect to my 6230i with my Trust BT120 Bluetooth USB adapter.
    The odd thing is that the driver installs ok. I can transfer files to and from the phone. When I try to use Nokia PC-suite then I don't get anything when trying to configure the Bluetooth connection. The program finds nothing.
    Any suggestions????
    Here's what I get from the PC Suite info box:
    Operativsystem: Microsoft Windows XP Udgave 2600 Service Pack 2 Sprog: English (United States) Sprog til programmer, som ikke bruger Unicode: English (United States) Landestandard: Danish Indtastningssprog: Danish
    Nokia PC Suite: Version 6.81.13.0
    Sprog: Dansk
    Connectivity Cable Drivers: Version 6.81.1.2
    Bluetooth-program: Microsoft Bluetooth-program Version 5.1.2600.2180

    Try the tips listed here Desktop computers: Troubleshooting wireless keyboard and mouse issues in Mac OS X v10.5 - Apple Support
    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Maybe you are looking for

  • New ALV field is not displaying

    Hi I have added the currency field in the existing ALV report. The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help Below is my ALV code for currency. PERFORM FILL_FIELDCAT USING 'WA

  • Currency conversion issue for condition type

    Hello, I am creating two invoice document. 1. Customs Invoice (ZCDS) 2. Inter company invoice.(IVA) both the invoices should be similar. Same pricing procedure is used to create both the documents but in Customs invoice YUMU condition type is not get

  • The decimal place is wrong in GR55

    Dear Expert: We are using currency JPY We now creating a new report using report painter, but unfortunately the decimal place is wrong, the result is only one percentage of the real amount, how can I get this issue solved? notice that we are using re

  • "Include transparency" on export to QT?

    Okay, what does this mean, anyway? When exporting a Keynote show to QuickTime, one of the options is to "include transparency". What does that mean? What gets identified as "transparent"? --Dave Althoff, Jr.

  • OWA can't be accessed after moving data files to new volume

    SBS 2008  Exchange 2007 Used the Move Files wizard in SBS Console to move Exchange files off of system drive to a storage drive.  Wizard said move was successful.  Opend Exchange management Console and verified path to files under Server/Mailbox. I g