6230i bluetooth modem and email

I am trying to use my mobile phone as a modem when away from a wifi connection (laptop), can anyone help me with the set up for this? Also I want to get emails using my nokia phone when I don't have the laptop. Again I need help with the setup. Thanks.

Contact your SP they will send you the relevant settings you need to do this!

Similar Messages

Using a Bluetooth modem and mouse together?

After much messing around I'm now able to use my T-Mobile Motorola W-490 as a Bluetooth modem with my 500MHz dual USB G3 iBook through a Bluetooth USB dongle. I'm using it to post this message actually. For some reason it won't work without Bluetooth, using just a USB cable to connect the computer to the phone. I guess I can live with that.
My question is, why can't I use any other Bluetooth device, including an Apple wireless mouse, or even the flash drive inside the W-490, while the modem is connected? Is this normal? When the phone isn't being used as a modem I can use its internal flash drive and a Bluetooth mouse together at the same time. My Bluetooth dongle is Bluetooth 2.0 even though the other devices are Bluetooth 1.0 I think (?) I'm new to Bluetooth, so any help would be appreciated.

You need a Bluetooth dongle or built in Bluetooth. I couldn't get it to connect through a USB cable.
Call T-Mobile and subscribe to their additional $20/month internet plan.
Wait a couple of days for T-Mobile to turn on the internet on your phone.
Download and install the "Motorola 3G CID1" modem script so Mac OS-X will recognize the phone as a modem.
Make the phone discoverable to other Bluetooth devices.
Setup the Bluetooth device with Bluetooth Setup Assistant.
Setup a new modem in Network preferences.
Show the new modem, and under the PPP tab set it to dial telephone number: "internet2.voicestream.com"
Under Bluetooth Modem select modem: "Motorola 3G CID1"
I'm sure I'm forgetting something. Write back if you have problems and maybe I'll remember more. You can call T-Mobile and ask for their Mac technical person. I shut off T-Mobile's internet service because it wasn't worth the extra $20/month to me. It's faster than a dialup modem when used as a modem to allow a computer to access the internet. The W490 phone used by itself to access the internet is unbelievably, mind numbingly slooow. (pulling hair) I'll probably have T-Mobile turn the internet back on when I go visit my mom, who doesn't have any internet connection at all. I'll shut it off as soon as I get back though. It'll make a nice way to get e-mail without driving down to a cafe with wireless. If you travel a lot this might be an affordable way to get your e-mail. It's much more affordable than a dedicated 3G modem, but it's also much slower.

Nokia 6230i - Bluetooth modem

While trying to connect to the internet via my mobile phone connected to the pc by bluetooth (IVT Bluesoleil dongle), PC Suite says that no Nokia modem is installed and advises to make sure that the Nokia connectivity cable driver is installed, which is already the case.
I have no other bluetooth software installed on my computer, and I have the bluetooth icon in the control panel.
Any help with this is appreciated.
Thanks.
MK

Some precisions. I'm using XP SP2, Tablet PC edition. My computer is a tablet PC Averatec 3500 series.
I have already tried to unistall/reinstall IVT software ad Nokia PC Suite. For info, without Bluesoleil software, my dongle cannot work.

Using LG CU320 as a Bluetooth Modem

I was able to connect my LG CU320 Cingular Phone as a bluetooth modem and verified a 217 kilobits per second connection.
I got some of this information from http://www.howardforums.com/showthread.php?t=874483.
Click on the Bluetooth icon in the menu bar and choose setup bluetooth device.
Choose Mobile phone.
You'll have to make sure you phone is "visible" from the bluetooth menu (may have that wrong, not sure how LG does it yet)
Follow the instructions from your mac's bluetooth assistant
Choose use Address book (if you want, don't know how that works yet) and as connection for internet.
For settings choose high speed direct connection.
for string (or number): 99**1#
for username: [email protected]
for password: CINGULAR1
all is case sensitive (that means use capital letters).
I know it seems weird but choose Sprint PCS Vision as the modem script. This is because the new 3G on Cingular is based on similar Sprint PCS Vision.
Open up Internet connect from the Applications folder, click on Bluetooth and choose connect. This should work. Others are welcome to add their two cents.

Are you in a UMTS area? I tried the same thing with my CU320.. Same settings and it starts to connect then immediatly disconnects.. I see the phone say "Connecting" then almost immediatly it says "Disconnecting".. My powerbook then says something about the modem disconnecting unexpectly and to try again.. I wonder if the dialing script is wrong, or if I am missing something else.. I am in a EDGE only area, so I wonder if it has to do with that and when UMTS launches here in a few months if that problem will go away?

Bluetooth modem connectin witm mac computer

Is possible to use the iphone as bluetooth modem and connect my Macbook Pro and use internet on my Macbook Pro rather then use the iphone screen?

Here in Uk i use T-mobile and i use a W810i sony ericsson and i got an additional date option which cost me £10 per mouth for unlimited data and i use my cellphone bluetooth and use it as modem and connect online using my mac computer,

VX8100 Transfer Files and Bluetooth Modem - FYI

Hello,
I just wanted to post a solution for those who have been looking for how to download pictures/messages/phonebook from VX8100 and who want to use it as a bluetooth modem on Tiger.
1.) Configure your bluetooth device via Bluetooth configurator
2.) For Bluetooth modem choose "Verizon Wireless PC 5200"
3.) Use BitPim, serial port, to download phonebook/pics/messages/etc
4.) Use Internet Connect to dial to Verizon Wireless #777, username [email protected], password 'vzw'.
Just tried it and worked great!
Enjoy!!

FYI

10.4.9 Allows Bluetooth PAN and Windows Mobile Cell as a modem - MBP

FYI,
I have been wishing/dreaming after all my fellow T-Mobile Dash owners that have been able to use their Dash as a Bluetooth modem with their PC laptops. There have also been those that can do the same by installing Windows on their Mac via Parallels. With 10.4.9 Apple has added PAN to Bluetooth. This allows one to use their cell phone that has Internet access as a modem. In the case of my Mac Pro, if/when my Internet connection is down, I can still surf at around 200Kb. When I am out in the outskirts with my MBP and there isn't a HotSpot nearby, I can do the same, like at the beach :>) Below is the link I found that explains the process:
http://www.furrygoat.com/2007/03/bluetoothmac_os_x_and_thedas.html
It may be a non-event for most of you, but I have been waiting for this for some time. I also have The Missing Sync installed to use the Dash on my MBP instead of Windoze....
Michael

follow-up

10.4.9 Allows Bluetooth PAN and Windows Mobile Cell as a modem

FYI,
I have been ******* after all my fellow T-Mobile Dash owners that have been able to use their Dash as a Bluetooth modem with their PC laptops. There have also been those that can do the same by installing Windows on their Mac via Parallels. With 10.4.9 Apple has added PAN to Bluetooth. This allows one to use their cell phone that has Internet access as a modem. In the case of my Mac Pro, if/when my Internet connection is down, I can still surf at around 200Kb. When I am out in the dingles with my MBP and there isn't a HotSpot nearby, I can do the same, like at the beach :>) Below is the link I found that explains the process:
http://www.furrygoat.com/2007/03/bluetoothmac_os_x_and_thedas.html
It may be a non-event for most of you, but I have been waiting for this for some time.
Michael

Wow,
Didn't think the word I used was going to be edited.....
Michael

Bluetooth Modem disconnect/timeout

Hi
I currently have a Eee Pc 1000he running windows xp and windows 7 rc. I have been trying to get my netbook to connect via bluetooth to my nokia e71 so that I can use internet when on the go. My issue is that when I connect to the handset everything works well but it seems to stop working after 5 - 10 minutes or so. The gprs internet still works fine yet no data goes thru the DUN connection anymore and my only option to get reconnected is to restart my phone. Does anyone have any suggestions as to how I can make the bluetooth modem connection more stable? This happens even if I have the phone right next to the netbook.
Any suggestions would be appreciated, it is interesting to note that this happens in both windows xp and windows 7 using the latest BT drivers for the netbook.

@adfh:
there's a Hot Fix available from Microsoft, to resolve this issue, Did you installed that?
When we try to connect to internet using Ovi suite first time, Ovi suite tells us to download that hot fix, gives the link. so try that.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Treo 650 ( as a modem and Maxis Malaysia as a service provide ) + iBook G4

I have sucessfully connect using dial-up networking with Maxis 3G and hotlink 2G ( Malaysia service provider )
Below is settings for Win XP :
The trick is to modify the advanced property settings in Bluetooth Modem (Control Panel -> Phone Modem Options)
Select on Bluetooth Modem, click on property Button.
Select Advaced tab, and enter this extra settings.
AT+CGDCONT=1,"IP","unet"
the above line is for 3G APN
AT+CGDCONT=1,"IP","net"
the above line is for 2G/GPRS or hotlink
Now I can connect using DUN between my laptop and Treo 650 as modem.
I also managed to use DUN between Treo 650 and N70 as 3G modem.
How about using iBook G4 ?

Under Bluetooth in System Preferences You can go ahead and put Alltelin Service provider if you want, it doesn't make any difference. Under Account name you need to put..your [email protected] as an example [email protected], then for password it is alltel all in lowercase. The telephone number to call is #777 then click apply now. You then click dial now. Now as far as your phone you need to go to bluetooth and turn dial up networking on or else it won't work. And yes you need to have the unlimited package that Alltel offers for $29.99. I am an alltel employee and know this works. If you have anymore ?'s just let me know.

[SOLVED] Gnome 3.8: Unable to use Nokia N9 as a Bluetooth modem

Hi,
I'm unable to use my Nokia Any ideas on how to fix this?
Here are some log files:
Bluetooth startup from everything.log:
/> bluetoothd[382]: Bluetooth daemon 4.101
bluetoothd[382]: Starting SDP server
bluetoothd[382]: DIS cannot start: GATT is disabled
bluetoothd[382]: Failed to init deviceinfo plugin
bluetoothd[382]: Failed to init gatt_example plugin
bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Unknown command complete for opcode 1J
bluetoothd[382]: Unknown command complete for opcode 19
bluetoothd[382]: bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
entries from everything.log:
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2800003 (Uuden Blue)
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
bluetoothd[382]: bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: bluetoothd[382]: Stopping discovery
bluetoothd[382]: Stopping discovery
kernel: [ 1179.820342] usb 2-1: reset high-speed USB device number 2 using ehci-pci
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.58" (uid=1000 pid=1082 comm="bluetooth-wizard ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ")
bluetoothd[382]: bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.AudioSource.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.AudioSource" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: Default Bluetooth adapter is powered
/etc/gdm/Xsession[612]: ** Message: dun_start: starting DUN device discovery...
/etc/gdm/Xsession[612]: ** Message: Tutkitaan puhelimen asetuksia…
/etc/gdm/Xsession[612]: ** Message: dun_start: calling Connect...
/etc/gdm/Xsession[612]: ** Message: dun_start: waiting for Connect success...
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: processing Connect reply
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: new rfcomm interface '/dev/rfcomm0'
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: finished
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kernel: [ 1212.925984] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.790844] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.791357] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Creating modem with plugin 'Nokia' and '1' ports
kernel: [ 1215.816882] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3' successfully created
kernel: [ 1215.820679] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem: state changed (unknown -> disabled)
kernel: [ 1216.873341] Bluetooth: TIOCGSERIAL is not supported
/etc/gdm/Xsession[612]: ** Message: modem_object_added: (/org/freedesktop/ModemManager1/Modem/0) modem found
/etc/gdm/Xsession[612]: ** Message: start_wizard: (/org/freedesktop/ModemManager1/Modem/0) starting the mobile wizard
NetworkManager[387]: <info> ignoring modem 'rfcomm0' (no associated Bluetooth device)
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: mobile wizard done
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: adding new setting
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: waiting for add connection result...
NetworkManager[387]: <info> BT device Nokia N9 (40:98:4E:65:A1:00) added (DUN)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): new Bluetooth device (driver: 'bluez' ifindex: 0)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'managed') [2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
/etc/gdm/Xsession[612]: ** Message: Puhelimesi on nyt valmis käyttöön.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.59" (uid=1000 pid=1082 comm="bluetooth-wizard ")
NetworkManager[387]: <info> (eth0): device state change: activated -> disconnected (reason 'user-requested') [100 30 39]
NetworkManager[387]: <info> (eth0): deactivating device (reason 'user-requested') [39]
avahi-daemon[392]: Withdrawing address record for 192.168.0.222 on eth0.
avahi-daemon[392]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.222.
avahi-daemon[392]: Interface eth0.IPv4 no longer relevant for mDNS.
dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
systemd[1]: Starting Network Manager Script Dispatcher Service...
dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
systemd[1]: Started Network Manager Script Dispatcher Service.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> failed (reason 'modem-not-found') [50 120 43]
NetworkManager[387]: <warn> Activation (40:98:4E:65:A1:00) failed for connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'none') [0]
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=387 comm="/usr/bin/NetworkManager --no-daemon ")
/> systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd-sysctl[132]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd-modules-load[138]: Inserted module 'fuse'
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Debug File System.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.9.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 09:22:45 CEST 2013
0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
syslog-ng[390]: syslog-ng starting up; version='3.4.1'
systemd[1]: Mounted Huge Pages File System.
0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-C7FFF write-protect
0.000000] C8000-FFFFF uncachable
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
0.000000] 4 base 000100000000 mask FFFF00000000 write-back
0.000000] 5 base 000200000000 mask FFFF00000000 write-back
0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
0.000000] TOM2: 0000000330000000 aka 13056M
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff8800000f5440]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
0.000000] [mem 0x32fe00000-0x32fffffff] page 2M
0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
0.000000] [mem 0x32c000000-0x32fdfffff] page 2M
0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
0.000000] [mem 0x300000000-0x32bffffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0xbfffffff] page 1G
0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
0.000000] [mem 0x100000000-0x2ffffffff] page 1G
0.000000] RAMDISK: [mem 0x378a4000-0x37c49fff]
0.000000] ACPI: RSDP 00000000000f6e70 00014 (v00 GBT )
0.000000] ACPI: RSDT 00000000cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: FACP 00000000cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: DSDT 00000000cfdf30c0 0725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
0.000000] ACPI: FACS 00000000cfdf0000 00040
0.000000] ACPI: SSDT 00000000cfdfa400 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
0.000000] ACPI: HPET 00000000cfdfad00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
0.000000] ACPI: MCFG 00000000cfdfad40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: APIC 00000000cfdfa340 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff]
0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff]
0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x32fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009efff]
0.000000] node 0: [mem 0x00100000-0xcfdeffff]
0.000000] node 0: [mem 0x100000000-0x32fffffff]
0.000000] On node 0 totalpages: 3145102
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3998 pages, LIFO batch:0
0.000000] DMA32 zone: 13240 pages used for memmap
0.000000] DMA32 zone: 847344 pages, LIFO batch:31
0.000000] Normal zone: 35840 pages used for memmap
0.000000] Normal zone: 2293760 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u262144
0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095937
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ c4000000 size 32 MB
0.000000] Aperture pointing to e820 RAM. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
0.000000] Memory: 12235744k/13369344k available (4984k kernel code, 788936k absent, 344664k reserved, 3966k data, 1092k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Dump stacks of tasks blocking RCU-preempt GP.
0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
0.000000] NR_IRQS:4352 nr_irqs:744 16
0.000000] spurious 8259A interrupt: IRQ7.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 50331648 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.003333] tsc: Fast TSC calibration using PIT
0.006666] tsc: Detected 2812.672 MHz processor
0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.73 BogoMIPS (lpj=9375573)
0.000006] pid_max: default: 32768 minimum: 301
0.000035] Security Framework initialized
0.000041] AppArmor: AppArmor disabled by boot time parameter
0.000892] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.005505] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007582] Mount-cache hash table entries: 256
0.007774] Initializing cgroup subsys cpuacct
0.007776] Initializing cgroup subsys memory
0.007786] Initializing cgroup subsys devices
0.007787] Initializing cgroup subsys freezer
0.007789] Initializing cgroup subsys net_cls
0.007790] Initializing cgroup subsys blkio
0.007813] tseg: 00cff00000
0.007816] CPU: Physical Processor ID: 0
0.007817] CPU: Processor Core ID: 0
0.007818] mce: CPU supports 6 MCE banks
0.007823] LVT offset 0 assigned for vector 0xf9
0.007828] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
0.007828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
0.007828] tlb_flushall_shift: 4
0.007908] Freeing SMP alternatives: 20k freed
0.008523] ACPI: Core revision 20130117
0.010353] ACPI: All ACPI Tables successfully acquired
0.042664] ftrace: allocating 19546 entries in 77 pages
0.399338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.432338] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (fam: 10, model: 04, stepping: 02)
0.535738] Performance Events: AMD PMU driver.
0.535742] ... version: 0
0.535743] ... bit width: 48
0.535744] ... generic registers: 4
0.535745] ... value mask: 0000ffffffffffff
0.535746] ... max period: 00007fffffffffff
0.535746] ... fixed-purpose events: 0
0.535747] ... event mask: 000000000000000f
0.565797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.572465] smpboot: Booting Node 0, Processors #1 #2
0.602275] Brought up 3 CPUs
0.602279] smpboot: Total of 3 processors activated (16882.19 BogoMIPS)
0.605948] devtmpfs: initialized
0.608503] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
0.609303] RTC time: 21:44:15, date: 06/16/13
0.609349] NET: Registered protocol family 16
0.609448] node 0 link 0: io port [b000, ffff]
0.609451] TOM: 00000000d0000000 aka 3328M
0.609453] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
0.609455] node 0 link 0: mmio [a0000, bffff]
0.609457] node 0 link 0: mmio [d0000000, dfffffff]
0.609459] node 0 link 0: mmio [f0000000, fe02ffff]
0.609460] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
0.609462] TOM2: 0000000330000000 aka 13056M
0.609464] bus: [bus 00-04] on node 0 link 0
0.609466] bus: 00 [io 0x0000-0xffff]
0.609467] bus: 00 [mem 0x000a0000-0x000bffff]
0.609468] bus: 00 [mem 0xd0000000-0xdfffffff]
0.609469] bus: 00 [mem 0xe0500000-0xffffffff]
0.609470] bus: 00 [mem 0xe0100000-0xe04fffff]
0.609471] bus: 00 [mem 0x330000000-0xfcffffffff]
0.609498] ACPI: bus type PCI registered
0.609552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.609554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.617921] PCI: Using configuration type 1 for base access
0.618123] mtrr: your CPUs had inconsistent variable MTRR settings
0.618124] mtrr: probably your BIOS does not setup all CPUs.
0.618125] mtrr: corrected configuration.
0.618516] bio: create slab <bio-0> at 0
0.618576] ACPI: Added _OSI(Module Device)
0.618577] ACPI: Added _OSI(Processor Device)
0.618578] ACPI: Added _OSI(3.0 _SCP Extensions)
0.618580] ACPI: Added _OSI(Processor Aggregator Device)
0.619096] ACPI: EC: Look up EC in DSDT
0.623380] ACPI: Interpreter enabled
0.623389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
0.623394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
0.623403] ACPI: (supports S0 S3 S4 S5)
0.623405] ACPI: Using IOAPIC for interrupt routing
0.623473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.637118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.637201] PCI host bridge to bus 0000:00
0.637204] pci_bus 0000:00: root bus resource [bus 00-ff]
0.637207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.637209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.637210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.637212] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
0.637214] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
0.637223] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
0.637234] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
0.637312] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
0.637342] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
0.637366] pci 0000:00:02.0: System wakeup disabled by ACPI
0.637399] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
0.637428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
0.637453] pci 0000:00:04.0: System wakeup disabled by ACPI
0.637485] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
0.637514] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
0.637542] pci 0000:00:0a.0: System wakeup disabled by ACPI
0.637581] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
0.637600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
0.637609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
0.637618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
0.637627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
0.637636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
0.637645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
0.637664] pci 0000:00:11.0: set SATA to AHCI mode
0.637736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
0.637749] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
0.637811] pci 0000:00:12.0: System wakeup disabled by ACPI
0.637840] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
0.637853] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
0.637916] pci 0000:00:12.1: System wakeup disabled by ACPI
0.637948] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
0.637966] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
0.638046] pci 0000:00:12.2: supports D1 D2
0.638047] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
0.638065] pci 0000:00:12.2: System wakeup disabled by ACPI
0.638099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
0.638112] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
0.638178] pci 0000:00:13.0: System wakeup disabled by ACPI
0.638205] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
0.638217] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
0.638282] pci 0000:00:13.1: System wakeup disabled by ACPI
0.638316] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
0.638334] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
0.638414] pci 0000:00:13.2: supports D1 D2
0.638415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
0.638436] pci 0000:00:13.2: System wakeup disabled by ACPI
0.638472] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
0.638587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
0.638602] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
0.638611] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
0.638620] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
0.638629] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
0.638638] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
0.638722] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
0.638743] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
0.638806] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
0.638830] pci 0000:00:14.2: System wakeup disabled by ACPI
0.638857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
0.638963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
0.639012] pci 0000:00:14.4: System wakeup disabled by ACPI
0.639040] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
0.639053] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
0.639119] pci 0000:00:14.5: System wakeup disabled by ACPI
0.639151] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
0.639203] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
0.639254] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
0.639305] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
0.639358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
0.639454] pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
0.639466] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
0.639475] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
0.639482] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
0.639493] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
0.639520] pci 0000:01:00.0: supports D1 D2
0.639554] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
0.639566] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
0.639616] pci 0000:01:00.1: supports D1 D2
0.648955] pci 0000:00:02.0: PCI bridge to [bus 01]
0.648960] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.648963] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.648966] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.649016] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
0.649081] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
0.649130] pci 0000:02:00.0: PME# supported from D3hot
0.649179] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
0.649197] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]
0.649207] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]
0.649217] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]
0.649227] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]
0.649237] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]
0.649319] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.649326] pci 0000:00:04.0: PCI bridge to [bus 02]
0.649329] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.649331] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.649334] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.649377] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
0.649389] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
0.649408] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
0.649421] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
0.649430] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
0.649474] pci 0000:03:00.0: supports D1 D2
0.649475] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.658954] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.658959] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.658961] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.658964] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.659008] pci 0000:04:06.0: [1131:7146] type 00 class 0x048000
0.659025] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff1ff]
0.659127] pci 0000:04:07.0: [9710:9805] type 00 class 0x078000
0.659143] pci 0000:04:07.0: reg 10: [io 0xbf00-0xbf07]
0.659155] pci 0000:04:07.0: reg 14: [io 0xbe00-0xbe07]
0.659167] pci 0000:04:07.0: reg 18: [io 0xbd00-0xbd07]
0.659179] pci 0000:04:07.0: reg 1c: [io 0xbc00-0xbc07]
0.659190] pci 0000:04:07.0: reg 20: [io 0xbb00-0xbb07]
0.659202] pci 0000:04:07.0: reg 24: [io 0xba00-0xba0f]
0.659264] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
0.659286] pci 0000:04:0e.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
0.659298] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
0.659387] pci 0000:04:0e.0: supports D1 D2
0.659389] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
0.659445] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
0.659449] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.659453] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.659457] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.659458] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
0.659460] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
0.659462] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
0.659463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
0.659465] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
0.659479] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
0.659481] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.659908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660468] acpi root: \_SB_.PCI0 notify handler is installed
0.660494] Found 1 acpi root devices
0.660564] ACPI: No dock devices found.
0.660640] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.660643] vgaarb: loaded
0.660644] vgaarb: bridge control possible 0000:01:00.0
0.660676] PCI: Using ACPI for IRQ routing
0.668997] PCI: pci_cache_line_size set to 64 bytes
0.669004] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
0.669070] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
0.669071] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
0.669150] NetLabel: Initializing
0.669151] NetLabel: domain hash size = 128
0.669152] NetLabel: protocols = UNLABELED CIPSOv4
0.669161] NetLabel: unlabeled traffic allowed by default
0.669177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
0.669180] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
0.671205] Switching to clocksource hpet
0.674983] pnp: PnP ACPI init
0.674994] ACPI: bus type PNP registered
0.675058] system 00:00: [io 0x04d0-0x04d1] has been reserved
0.675060] system 00:00: [io 0x0220-0x0225] has been reserved
0.675062] system 00:00: [io 0x0290-0x0294] has been reserved
0.675065] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675512] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.675535] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
0.675543] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
0.675575] system 00:01: [io 0x4100-0x411f] has been reserved
0.675578] system 00:01: [io 0x0228-0x022f] has been reserved
0.675580] system 00:01: [io 0x040b] has been reserved
0.675581] system 00:01: [io 0x04d6] has been reserved
0.675583] system 00:01: [io 0x0c00-0x0c01] has been reserved
0.675585] system 00:01: [io 0x0c14] has been reserved
0.675586] system 00:01: [io 0x0c50-0x0c52] has been reserved
0.675588] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
0.675589] system 00:01: [io 0x0c6f] has been reserved
0.675591] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
0.675593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
0.675594] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
0.675596] system 00:01: [io 0x4000-0x40fe] has been reserved
0.675597] system 00:01: [io 0x4210-0x4217] has been reserved
0.675599] system 00:01: [io 0x0b00-0x0b0f] has been reserved
0.675601] system 00:01: [io 0x0b10-0x0b1f] has been reserved
0.675602] system 00:01: [io 0x0b20-0x0b3f] has been reserved
0.675604] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
0.675608] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675676] pnp 00:02: [dma 4]
0.675693] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.675740] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.675772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.675791] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
0.675815] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
0.676004] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
0.676006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
0.676106] pnp 00:08: disabling [mem 0x000cfe00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676108] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676110] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676112] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676114] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676117] pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676153] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
0.676155] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
0.676157] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
0.676159] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
0.676161] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.676162] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
0.676164] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
0.676166] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
0.676180] pnp: PnP ACPI: found 9 devices
0.676182] ACPI: bus type PNP unregistered
0.682550] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
0.682553] pci 0000:00:02.0: PCI bridge to [bus 01]
0.682556] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.682558] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.682561] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.682564] pci 0000:00:04.0: PCI bridge to [bus 02]
0.682566] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.682568] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.682570] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682574] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
0.682575] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.682577] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.682579] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.682582] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682585] pci 0000:00:14.4: PCI bridge to [bus 04]
0.682587] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.682592] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.682595] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.682771] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.682772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.682774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.682775] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
0.682777] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
0.682779] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
0.682780] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
0.682782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.682784] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
0.682785] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
0.682787] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682788] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
0.682790] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
0.682791] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682793] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
0.682795] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
0.682796] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
0.682798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
0.682799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

I managed to get my wired connection back and updated my system. After that (and a reboot), NetworkManager started to mysteriously work.
Here are the relevant parts from journald's log:
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'dna internet connection'
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.388835] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.390823] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.398034] [nm-device-bt.c:947] act_stage2_config(): (40:98:4E:65:A1:00): requesting connection to the device
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813677] [nm-device-bt.c:836] bluez_property_changed(): (40:98:4E:65:A1:00): bluez property 'Connected' changed to 'true'
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813775] [nm-device-bt.c:846] bluez_property_changed(): (40:98:4E:65:A1:00): connected to the device
kesä 17 17:47:53 sunnydale NetworkManager[387]: <debug> [1371480473.67585] [nm-device-bt.c:808] bluez_connect_cb(): (40:98:4E:65:A1:00): connect request successful
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
kesä 17 17:47:53 sunnydale upowerd[518]: (upowerd:518): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kesä 17 17:47:53 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Creating modem with plugin 'Nokia' and '1' ports
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb4/4-3' successfully created
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem: state changed (unknown -> disabled)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) modem found.
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect started...
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (3/8): Enable
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> enabled)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (4/8): Wait to get fully enabled
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (5/8): Register
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (6/8): Bearer
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (7/8): Connect
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> connecting)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabled' --> 'connecting' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <warn> Couldn't load Operator Name: 'Unknown error'
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: 'A1', Cell ID: '10C654')
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (8/8): All done
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <warn> (rfcomm0): failed to look up interface index
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987235] [nm-device.c:3066] nm_device_activate_schedule_stage3_ip_config_start(): Activation (40:98:4E:65:A1:00) setting firewall zone 'default'
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987260] [nm-firewall-manager.c:107] nm_firewall_manager_add_or_change_zone(): (rfcomm0) firewall zone add/change skipped (not running)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) scheduled.
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) started...
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> ip-config (reason 'none') [50 70 0]
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987628] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> using modem-specified IP timeout: 20 seconds
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> starting PPP connection
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.988323] [nm-ppp-manager.c:1068] nm_ppp_manager_start(): command line: /usr/sbin/pppd nodetach lock nodefaultroute ipv6 , debug rfcomm0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> pppd started with pid 914
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) complete.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) started...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) complete.
kesä 17 17:47:58 sunnydale pppd[914]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale NetworkManager[387]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale kernel: PPP generic driver version 2.4.2
kesä 17 17:47:58 sunnydale pppd[914]: pppd 2.4.5 started by root, uid 0
kesä 17 17:47:58 sunnydale pppd[914]: using channel 1
kesä 17 17:47:58 sunnydale pppd[914]: Using interface ppp0
kesä 17 17:47:58 sunnydale pppd[914]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.113258] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x1090
kesä 17 17:47:58 sunnydale NetworkManager[387]: using channel 1
kesä 17 17:47:58 sunnydale NetworkManager[387]: Using interface ppp0
kesä 17 17:47:58 sunnydale NetworkManager[387]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale systemd-sysctl[922]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.116359] [nm-udev-manager.c:568] handle_uevent(): UDEV event: action 'add' subsys 'net' device 'ppp0'
kesä 17 17:47:58 sunnydale NetworkManager[387]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale pppd[914]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale NetworkManager[387]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale kernel: PPP BSD Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale kernel: PPP Deflate Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale pppd[914]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale NetworkManager[387]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale pppd[914]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale pppd[914]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale pppd[914]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale pppd[914]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.851617] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x110D1
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> PPP manager(IP Config Get) reply received.
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) started...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.852986] [nm-system.c:194] sync_addresses(): (ppp0): syncing addresses (family 2)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853021] [nm-system.c:247] sync_addresses(): (ppp0): removing address '10.241.96.30/32'
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale NetworkManager[387]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale NetworkManager[387]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale NetworkManager[387]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale NetworkManager[387]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853775] [nm-system.c:280] sync_addresses(): (ppp0): adding address '10.241.96.30/0'
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:04 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855173] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.6.6.6/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855250] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.241.96.30/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855608] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_ip4_config_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855649] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration did not change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855666] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (device_ip4_config_changed): no DNS changes to commit (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855795] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858147] [nm-device.c:5244] nm_device_queue_state(): (40:98:4E:65:A1:00): queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858200] [nm-device.c:5174] nm_device_state_changed(): (40:98:4E:65:A1:00): device entered SECONDARIES state
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) complete.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.870449] [nm-device.c:5202] queued_set_state(): (40:98:4E:65:A1:00): running queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: secondaries -> activated (reason 'none') [90 100 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.872130] [nm-manager.c:591] manager_device_state_changed(): (40:98:4E:65:A1:00): triggered connectivity check due to state change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873625] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_state_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873683] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (update_routing_and_dns): queueing DNS updates (2)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Policy set 'dna internet connection' (ppp0) as default for IPv4 routing and DNS.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874320] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874341] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (update_routing_and_dns): no DNS changes to commit (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874368] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874383] [nm-dns-manager.c:1022] nm_dns_manager_end_updates(): (device_state_changed): committing DNS changes (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874399] [nm-dns-manager.c:591] update_dns(): updating resolv.conf
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) successful, device activated.
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:48:07 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:07 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:21 sunnydale /etc/gdm/Xsession[622]: (process:953): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
kesä 17 17:48:22 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:22 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus 0x2200006 (jussi@sunn) with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:31 sunnydale pppd[914]: IPV6CP: timeout sending Config-Requests
kesä 17 17:48:31 sunnydale NetworkManager[387]: IPV6CP: timeout sending Config-Requests
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale systemd[1]: Starting Hostname Service...
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale systemd[1]: Started Hostname Service.
kesä 17 17:49:43 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_raise: assertion `!window->override_redirect' failed
kesä 17 17:49:44 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_lower: assertion `!window->override_redirect' failed
And here is log about the updates I made:
[2013-06-17 17:01] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:01] [PACMAN] synchronizing package lists
[2013-06-17 17:01] [PACMAN] starting full system upgrade
[2013-06-17 17:04] [PACMAN] Running 'pacman -S --asdeps polkit'
[2013-06-17 17:04] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:24] [PACMAN] Running 'pacman -U --asdeps lib32-polkit-0.111-1-x86_64.pkg.tar.xz'
[2013-06-17 17:24] [PACMAN] upgraded lib32-polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:27] [PACMAN] Running 'pacman -S --asdeps libxkbcommon'
[2013-06-17 17:27] [PACMAN] upgraded libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -U --asdeps lib32-libxkbcommon-0.3.1-1-x86_64.pkg.tar.xz'
[2013-06-17 17:28] [PACMAN] upgraded lib32-libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:28] [PACMAN] synchronizing package lists
[2013-06-17 17:28] [PACMAN] starting full system upgrade
[2013-06-17 17:33] [PACMAN] removed lib32-dbus-core (1.6.10-1)
[2013-06-17 17:33] [PACMAN] upgraded attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded acl (2.2.51-3 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] upgraded attica (0.4.1-2 -> 0.4.2-1)
[2013-06-17 17:33] [PACMAN] upgraded cups-pk-helper (0.2.4-1 -> 0.2.5-1)
[2013-06-17 17:33] [PACMAN] upgraded dbus (1.6.10-1 -> 1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded dosfstools (3.0.17-1 -> 3.0.20-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk-update-icon-cache (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded flashplugin (11.2.202.285-1 -> 11.2.202.291-1)
[2013-06-17 17:33] [PACMAN] upgraded libgdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [ALPM] warning: directory permissions differ on /var/log/gdm/
filesystem: 711 package: 1770
[2013-06-17 17:33] [PACMAN] upgraded gdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [PACMAN] upgraded geoip-database (20130514-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded git (1.8.3-1 -> 1.8.3.1-1)
[2013-06-17 17:33] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-17 17:33] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-17 17:33] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-17 17:33] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-17 17:33] [PACMAN] upgraded gnome-user-docs (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-afc (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-goa (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] Users no longer need to be in the 'camera' group to use camera devices
[2013-06-17 17:33] [PACMAN] upgraded libgphoto2 (2.5.1-1 -> 2.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-gphoto2 (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-mtp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-obexftp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-smb (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded hwids (20130512-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jdk7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded krb5 (1.11.2-4 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-acl (2.2.51-2 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] installed lib32-dbus (1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded libbsd (0.4.2-1 -> 0.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-17 17:33] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libpipeline (1.2.3-1 -> 1.2.4-1)
[2013-06-17 17:33] [PACMAN] upgraded libquvi-scripts (0.4.14-1 -> 0.4.15-1)
[2013-06-17 17:33] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-17 17:33] [PACMAN] upgraded libxvmc (1.0.7-1 -> 1.0.8-1)
[2013-06-17 17:33] [PACMAN] upgraded link-grammar (4.7.11-1 -> 4.7.12-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-firmware (20130528-1 -> 20130610-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [PACMAN] upgraded linux (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-headers (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded lirc-utils (1:0.9.0-46 -> 1:0.9.0-47)
[2013-06-17 17:33] [PACMAN] upgraded mime-types (8-1 -> 9-1)
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus.desktop as /usr/share/applications/nautilus.desktop.pacnew
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus-autorun-software.desktop as /usr/share/applications/nautilus-autorun-software.desktop.pacnew
[2013-06-17 17:34] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:34] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-down.d/00-dns.sh installed as /etc/ppp/ip-down.d/00-dns.sh.pacnew
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-up.d/00-dns.sh installed as /etc/ppp/ip-up.d/00-dns.sh.pacnew
[2013-06-17 17:34] [PACMAN] upgraded ppp (2.4.5-6 -> 2.4.5-7)
[2013-06-17 17:34] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-17 17:34] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-17 17:34] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-17 17:34] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-17 17:34] [PACMAN] upgraded pulseaudio (4.0-1 -> 4.0-2)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus-common (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python2-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded sdparm (1.07-1 -> 1.08-1)
[2013-06-17 17:34] [PACMAN] upgraded sg3_utils (1.35-1 -> 1.36-1)
[2013-06-17 17:34] [PACMAN] upgraded shared-desktop-ontologies (0.10.0-1 -> 0.11.0-1)
[2013-06-17 17:34] [PACMAN] upgraded subversion (1.7.9-6 -> 1.7.10-1)
[2013-06-17 17:34] [PACMAN] upgraded sudo (1.8.6.p8-2 -> 1.8.7-1)
[2013-06-17 17:34] [PACMAN] upgraded syslog-ng (3.4.1-3 -> 3.4.2-1)
[2013-06-17 17:34] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-17 17:34] [PACMAN] upgraded webkitgtk (2.0.2-3 -> 2.0.3-1)
[2013-06-17 17:34] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
I'm marking this thread solved for now. If the problem arises again, I'll reopen it.

How can I temporarily change to a different ISP and email account ?

I currently use Earthlink DSL with the modem connected by ethernet cable for my email and internet access . . . my brother has a Windows XP PC connected by cable modem, his ISP is Adelphia Cable . . . he is sick of years of Windows problems and ready to consider a Mac so since I have 2 older iMacs I want to lend him one to learn Leopard on and try out for a while . . . how do I set it up for his ISP's internet connection and email account ? . . . I need to keep all my Earthlink account settings intact for when he gives it back . . . do I need to temporarily add a new user with full privileges and separate ISP / email ? . . . or can I set up a secondary ISP / email account for myself as Administrator but enter all his email info instead of mine ? . . . thanks in advance for any advice.

Thanks Larry . . . my brother and I do not use wireless, I am planning to shut down his PC, turn off his cable modem, switch the cable from the PC to my iMac, turn the cable modem back on, and see what happens when I boot up . . . when I did an Erase & Install of Leopard on this G5 iMac I chose DSL Modem during Setup Assistant and was instantly online with Earthlink . . . so I'm hoping the iMac will somehow recognize my brother's Adelphia Cable connection . . . your instructions for setting up his email are what I figured I would need to do so I hope he knows where to find all the necessary info on his PC because I know nothing about Windows XP.
DJ Bluemorph

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

What kind of mac would I need for Nexflix, basic search and email? Also, sounds silly, but can I connect an HDMI from Mac to tv?

Just an FYI. The Macs named PowerMac date from early 2006 and before. Use this tip to discover where to post once you get your Mac:
Site map of Communities and Categories
The cheapest Mac available new is a Mac Mini. It is no bigger than many an external hard drive. But the screen and keyboard and mouse must be purchased separately. They support USB and Bluetooth keyboards and mice, and pretty much any DVI, HDMI, or displayport display. Although the iMac is certainly an attractive option if all you want to deal with is deciding on a printer. I still recommend getting an Apple USB keyboard for the occasional times you may need to troubleshoot startup issues. Normally not a problem, but as it gets older some issues can be fixed at startup or diagnosed at startup.

Location of Openreach modem and Home Hub (BT Infin...

In my previous property I asked the BT engineer to locate the modem/HH in an upstairs study and this was no problem, no extra cabling required (master socket was in kitchen) all extension sockets still work fine. I moved home and had BT Infinity 2 installed, phone line enabled same day. The house was built in 2007 so has extensions in all the rooms. Looks like the master socket is in the cupboard under the stairs. Although the previous occupier obviously had the openreach modem and home hub located in the lounge, as the mounting screws etc were still there. But here none of the extensions work, the engineer said this is a side effect of moving the master socket. But why was this possible in my previous house?
The engineer installed with the existing screws etc and left it all in the lounge and still none of the extensions work. I'd like my extensions working and the modem/hub located in my upstairs office, how do I arrange for this?

Hi Youngy
Sorry for the delay.
I can see your email in our inbox and we'll get you a response sent asap.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Using own modem and router

Hi,
I've decided not to use the home hub 4 and to use my own modem equipments.
I was told that I only need to enter [email protected] as login name and password as password, then internet should work...
It is strange because the modem could get an IP from the DNS, but there's no internet connection.
I already followed the steps here: http://btbusiness.custhelp.com/app/answers/detail/a_id/258/~/can-i-use-my-own-broadband-modem-or-rou...
any ideas?
thanks
Solved!
Go to Solution.

thanks for your responses.
yes, I tried different login names and passwords. I knew they worked because the modem managed to detect the upstream and downstream speed, as well as the ip address, DNS server, etc...
I did a ping check through the modem and it said it worked... strangely, the ADSL loopback check was failed.
Other settings were UK default, ie. VC, PPPoA, 0,38... I am using a Zyxel P-660R-D1.
Key thing is I am using a separate modem and router, both of them are high quality equipment because i'll be setting up a server to do cloud storage. Also i prefer not to use all in one model-router coz I think separate equipments just work better.
So any ideas? Is there anything special about the Homehub that BT isnt telling us, whereas we need HH in order to get on internet??
Thanks

6230i bluetooth modem and email

Similar Messages

Maybe you are looking for