6230i cannot connect via Bluetooth

Hello !
I use since month a 6230i and I get now this problem :
Even if my phone is recognized by Windows XP SP2 Bluetooth Manager, it is not recognized in PC Suite 6.85.14.1
I can connect via IrDA, but it is not so easy ! I am now busy with content copier... And I guess I will go to sleep before the end of the process... :-D

Please check the section for supported bluetooth drivers:
/discussions/board/message?board.id=connectivity&thread.id=114
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • Hi my wife and I have an iphone 5 each yet we cannot connect via bluetooth any solutions please

    Hi All
    My wife and I cannot connect via bluetooth both phones just go in search mode but find nothing and both phones are now discoverable any help please thanks in advance

    You can do it via Wi-Fi through email. Or you can set up an iPhoto library with a shared PhotoStream in order to share photos.
    If you both sync your devices using iTunes to the same iTunes Library, then you can have a common library of data that each of you can sync to your devices. You can also share data through your iCloud storage account. You have 5 GBs for your Apple ID and can purchase more if needed.
    Please get iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB.
    Please get iPad and iPad mini User Guide (For iOS 7 Software)Sep 18, 2013 - 21 MB.

  • My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

    My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

    For what purpose are you trying to connect them?
    The only supported Bluetooth function between a Mac and iPhone is internet tethering.

  • CK-7W and 6230i only connects via bluetooth

    I have installed the carkit ck-7w and the phoneholder MBC-15S, but the only way my phone will connect to the carkit is via the bluetooth. When I put the phone in the holder (MBC-15S and the datacable)it starts charging but doesn't route the microphone or speaker to the carkit. The symbol that indicates a connection to the carkit (the symbol of a little car) does not appear. I have tried to replace the headunit of the carkit and the datacable, but without success. I also assume that the holder (MBC-15S) is not the problem because the problem is still there when the datacable is connected directly into the 6230i. Replacing the phone with an identical 6230i itself doesn't resolve anything, so I assume the 6230i isn't the source of the problem.
    Does anyone know a solution to this problem?
    Have anyone experienced a similar scenario?
    Could it be a software issue regarding the 6230i?

    Hi! Just wanted to share the solution to my previously described problem.
    It turned out that the CK-7W carkit wouldn't work properly as a result of an extension CAT-5 cable. During the installation ut turned out that the cable that runs from the phoneholder (MBC-15S) to the CK-7W was too short, so I decided to use an extension cable. The extension cable was an ordinary CAT-5 cable with 8P8C plugs in both ends, approximatly 50 cm long, connected to a free standing socket witch allows a 8P8C plug to inserted in both ends, making it possible to plug the male ends from the original datacable to the aftermarket CAT-5 plug(8P8C plug) together.
    I removed the CAT-5 cable and used only the original datacable and the problem was solved.
    I tested the CAT-5 cable and the free standing socket in a computer and everyting worked fine. So I guess there was nothing wrong with my aftermarket cable equipment.

  • Cannot get my iphone 4 to connect via bluetooth to another phone or my pc

    I cannot get my iphone 4 to connect via bluetooth to another phone or my PC, despite activating bluetooth on the iphone it just says 'devices' 'searching' 'now discoverable'. I have put the 2 devices very close to each other as well.
    Anybody have any ideas?
    Thanks

    That's because it's not supported. The iPhone supports hands free devices, keyboards and A2DP audio streaming. Bluetooth can only be used to a computer for tethering. Some apps can establish peer to peer connections for gaming and data sharing, but that's it.
    What you're trying to do will NOT work.

  • Why cannot my Mac book pro connect via bluetooth my Iphone 5?

    why cannot my Mac book pro connect via bluetooth my Iphone 5?

    Because the iPhone does not support the BlueTooth file transfer profile. The only phone to computer profile supported is for tethering.

  • My ipad shows connected via bluetooth but doesnt actually go online

    I have recently been using my MacBook Pro internet to connect via bluetooth to my ipad. It was working fine and then I went away for a week and when I came back its now not working. It shows connected on my MacBook and my Ipad but when I try to go on the internet in my ipad it says I cannot connect. Any ideas as to why it was working before and now its not. I have tried uninstalling my ipad from the bluetooth and resetting it up but still nothing.

    Post in the iPad forum.

  • Cannot connect with Bluetooth

    Hi,
    I'm on Windows XP Pro service pack 3. I use PC Suite 7.0.9.2.
    I used to connect my phone (Nokia 6500c) to my laptop via bluetooth fine. However, I got a new laptop (Lenovo SL500) and I can't connect via bluetooth anymore.
    Here is what happens:
    I go "Get Connected" -> Bluetooth connection -> it fins my phone, I click on the phone, then click next -> it asks to enter a passcode (let's say the usual "123"), I click net. Then, a bubble pops up for my bluetooth icon in the system tray saying "Bluetooth Security Code Required: Bluetooth device "Nokia Tony" is attempting to connect to this computer. Click here to proceed with the conection".
    I click on the bubble, a window called Bluetooth Security Setup pops up and tries to connect my phone.... "Pairing failed". I click "try again", my phone then asks me if I want to connect with my PC, I accept, the window "Bluetooth Security Setup" generates a six-digits code that I enter in the phone... pairing is made... but the window "Get Connected" of PC Suite tells me "Cannot authenticate the phone".
    any help, please?? I probably need to override the Bluetooth software, but dunno how.
    when I look into Device Manager, there are two things under "Bluetooth Devices":
    - Bluetooth Bus Enumerator
    - ThinkPad Bluetooth with Enhanced Data Rate II
    thanks for helping
    Tony

    05-Dec-2008 05:07 AM
    miksu wrote:
    hi, I think that pc suite 7.0 does not support widcomm 5.5 stack. There will come PC Suite 7.1 quite soon (it is now in beta testing). Please try that when it is available.
    For those who can't wait (like me), the PC Suite 7.1.18.0 beta is available for download there: http://fileforum.betanews.com/detail/Nokia_PC_Suit​e/1084122750/1
    oh yeah, and by the way... with this version of PC Suite, it CAN connect the phone and the Thinkpad SL500 via Bluetooth
    Message Edited by tonydoss on 05-Dec-2008 06:53 AM

  • Connecting via BlueTooth (Sony Ericsson) To Internet Problem - SOLVED

    I am trying to use my mobile phone, Sony Ericsson T650i, to surf the web via BlueTooth from my MBP.
    I can connect via Bluetooth, the lights all go green on Net Diagnostics but cannot actually surf the web.
    Tried different CID values, APN etc etc and spoke to the cellular provider also whom tried to assist.
    Still cant get on the web.
    Strange thing is the Net Diag lights are all green.....
    Any ideas please ?
    SOLVED: Need to turn on BlueTooth Internet on the phone under Bluetooth and choose the correct portal !
    Message was edited by: phil_a
    Message was edited by: phil_a

    could you describe in more detail how you did it? I'm trying to connect my sony ericsson k810i to internet via my mac dsl-- (I have tmobile pay as you go, so no gprs/wap etc.)

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • Cannot connect via cable on Windows XP home SP2

    Good Afternoon,
    Maybe you can assist me here.
    I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
    In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
    The following is the steps I followed in both cases starting with XP Pro
    1. Installed Drivers
    2. Installed PC Suite
    3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
    XP Home
    Followed steps 1 + 2 in the same order
    3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
    At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
    I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
    Can you advise on what I can do.

    Hi
    Sounds lik ethe PC is having issues seeing it. Try this
    /discussions/board/message?board.id=pcsuite&message.id=11480
    Try this first:
    1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
    3. Select "PC Connectivity Solution", click "Change" and then "Repair".
    4. After Repair, restart PC
    music

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset

    My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7.  Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud.  Worked last night but same problem today.  It also will no longer connect to my wireless headset in my car.  Of course I'm now 5 days over my 1 year warranty as well.  Any ideas?

    Delete the pairing from both devices then pair them again.

  • Any ideas why iPhone 6 cannot connect to bluetooth in my new 2015 Nissan Altima.

    Any ideas why iPhone 6 cannot connect to bluetooth in my new 2015 Nissan Altima.
    Thank you.

    To be honest, if you do a search of the forum, you will find a number of posts with problems with the 2015 Nissan Altima. It appears that it cannot pair. This seems to be a problem with the vehicle itself and users have been contacting the manufacturer for updates to the vehicle's system in hopes of correcting this. I suggest you contact your dealer and ask if he has any info from Nissan. They will probably try to get rid of you by saying it is a phone problem, but as I said earlier, there are multiple posts here about issues with the Altima.

  • Questions: cannot connect via wireless laptop (router WR...

    Questions:
    cannot connect via wireless laptop (router WRK54G)
    cannot secure my network using WEP

    from the wired computer , access the router using http://192.168.1.1 . the default password is admin
    on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
    go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
    under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

Maybe you are looking for

  • Photo Gallery bug in IE7

    http://labs.adobe.com/technologies/spry/demos/gallery_pe/dynamic/index.html On mouseover, selected thumbnail expands behind other thumbnails instead of hovering over them. Works fine in FF. Is there a way to fix/override this?

  • IF statement in SMARTFORMS

    Hi , My IF statement dosnt seems to work in smartforms.I have the following code in window-text element . if &adrc-name1& ne ' '. &adrc-name1& endif. if &adrc-name2 ne ' '. &adrc-name2& endif But still its creating the blank lines on script output.I

  • Data security on Macbook Pro 13.3 2.26gHtz

    Hi Experts, I made the recent switch from Windozzz to Macbook Pro and I am loving it every bit although I am totally new to the OS. I have some basic questions. 1. How do we secure our data in Mac. I the sense, lets say i have 100 images and some fil

  • Can I reference page-flow bean from a bounded-task-flow page-fragment?

    I have a view activity implemented as page fragment in my bounded task flow. I declare a page-flow scope managed-bean in adfc-config.xml to do some initialization for the bounded-task-flow: <managed-bean id="__23"> <managed-bean-name id="__22">TaskFl

  • SQL Loader or Materialized view

    Can we achive the following SQL Loader ? If yes can someone point me out some ling Requirement: We need to create a Reporting DB to use for Reporting and a Transactional DB will be in separate Host. Basically we need to pull data from a set of tables