6230i Contact search problem(Sim related issue?)

Hello
I have purchased a Nokia mobile phone model number 6230i.I have a query to clarify. While I am searching a contact in my phone book I could not find out the exact contact name.
for example:
I have a contact 'Johny' in my sim. While I am searching for this cotact by typing 'JO' the phone shows 'no match'. I feel the problem is with the case sensitivity of the name. ie. If the name is saved as 'JOHNY' I could simply locate the name by typing 'JO' in the edit box. But the same model phone with my friend doesn't has this problem and it works
fine.
I heard it is a sim card related issue. If so can I solve this problem by a software update?
Dinraj Nair.

Hi,
If this is a problem with your sim card, then I dont think it can be fixed by a software upgrade (as there is nothing to upgrade on a Simcard apart from hardware). My 6230i doesnt have this problem.
You can get cheap simcards now, and your operator should be able to transfer your number to the new card.

Similar Messages

E71 Contact search problem

My contact search function on E71 is ok, just that I can't call out 2 entries in contacts.
1) 1Jen
2) BJ
As these 2 names's second character is "J" it is also "#" and the first character are also with numbers. That is why the home screen showed
1) 1#
2) 8#
And it gave me the phone numbers which was the 1st and 8th stored on my SIM card contact.
I used to be able to call them without such problem. Only experience this today.
Does anyone know how to turn off SIM contact reading?
Rgds,
DB

Firstly, open up each contact in turn and select Options>Play voice tag - this will tell you how the phone interprets the name. As you are using abbreviations, the voice recognition system may be interpreting the text strangely.
It is also possible that the problemis caused by the shortness of the name. Often, it is better to have a full name (eg: Marcus de Bruyn) instead of a shorter form (eg: Marc) because when you say a name with more syllables you give the recognition system more data to work with in comparing with your contacts.

Nokia 5800 contacts search problem after phone swi...

Recently bought a new 5800. Used Phone Switch to retrieve contacts from older Nokia, seemed to work ok.
The problem is that ALL NEW contacts added to 5800 memory appear BELOW the contacts list (not sorted) AND cannot be found via contact search. This is very annoying. How can this be fixed?
Thanks.

It sometimes does this.
Unlock the phone, go into the messaging and come back out again.
The "new message" notification should stop now.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Treo 680: Typedown contacts search problem: can't find anything after S

I recently purchased an unlocked GSM Treo 680 to replace a stolen Treo 650 (which replaced a 600, which replaced another 600, etc.). I loaded all my data on to it. However, when I do a typedown search in Contacts, it refuses to find any entries which (alphabetically by last name) occur after my friend "Catherine Simmonds". Even if their first name begins with an earlier letter of the alphabet, it doesn't find them. I can reach their entries by doing a lot of scrolling in the full list, but no other way.
However, if I make a change of some sort to the contacts database, it does find them - for one search only. If I back up (delete a letter) on the search or cancel and do a new search, it stops being able to find them again. I've tried deleting some contacts, including the two either side of the "break", to see if they are corrupt in some way or if it's the number of contacts (I have about 420), but that doesn't seem to make a difference. At all times, I can find the contacts using the global search tool - although the 680 seems to have stopped the previous practice of starting global searches with the current database, which means it's often the second screen before the contact shows up.
I run Ubuntu Linux 8.04, and am using jpilot as my sync software.
To me, particularly given the intermittent nature of the thing and the ability to make it work temporarily by making changes to the Contacts database, this has all the marks of a software bug. Is it a known issue? Has anyone else seen it? Is there a fix?
I'm using software version TREO680-2.12-ROW, Firmware R01.92. Please let me know if there's more information I can provide.
Gerv
Post relates to: Treo 680 (Unlocked GSM)

What exactly do you mean by starting again?
Previously, I restored a backup and then synced to get all data since the backup. I could certainly do that again. But I don't want to go all the way back to the backup only, because I'd lose all the data between then and now.
jpilot, my sync software, won't let me sync on to a completely blank Treo. It tells me that I have to restore a backup first as a base. So I'm not sure if I'm able to restore the PIM data without restoring everything.
I think it's unlikely to be an incompatible application because the problem is with a shipped Palm app. But you know more about Palm OS than me.
But I'll have a play around and let you know how far I get.
Gerv
Post relates to: Treo 680 (Unlocked GSM)

Contacts Search Problem E90

I have spent much time reading previous messages on the forum.
Can someone please tell us when the problem is likely to be addressed. The new firmware has been released and does not pay any attention to this particular problem.
Will we have to continue using the long drawn process of searching from office in the meanwhile?
Can someone from Nokia address the issue please, or recomend some alternate faster software like the one in the 9300, which allows you to search anything from the contacts database?

Last week a new SW version appeared for a short time on the Nokia Server...Then Nokia withdrew it with no explanation.
/discussions/board/message?board.id=communicators&thread.id=18023
One of the first question that was asked when this new SW appeared was.."Has the search function been improved?"
The answer was.."no change!"
One might hope that when the new SW is release it will address this weakness.
I have to admit that I do not know whether the obvious shotcomings in the "search facities" is a resultof Symbian s 60.3 short coming or Nokia SW design..or a combination of the two.
Nokia produced this application but in my opinion it only helps a bit and is not a full solution.
http://europe.nokia.com/A4568514
zayed_honey your phone is faulty and should be taken to the nearest Nokia Care Centre.

Nokia 2730 Contact search problem

Nokia 2730, having trouble searching for contacts, it will only let me search by their first name, anything else is irrelivant.
ie; if I have a contact called 'Bob Smith' and I search for 'Smith' it will not show up.
I think I need this function as I am constantly sending group for organising sporting teams.
I believe I have the lastest software in the phone, brand new out of the box I used Nokia Ovi Suite to try and update it, it said there were no updates available.
Solved!
Go to Solution.

Some ammendment in chanchan05's first post..
In case of S40 phones.. under Contacts settings-->Name display..If 'Last Name First' is selected..then the search is on LAST NAME..but yes, with a corresponding setting it will either search on First Name or Last Name at one time and not have the search functionality of an S60..
@wigwam - Can you explain your problem a bit more ? What comes up when you type 'M' ?..and is it a One Off issue or happens with search for any other contact (e.g. you have a contact called Jimmy and when you type 'J' it doesn't bring his name up)?
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Contact search problem

When i type the first letter of a contact for example the letter A nothing shows. On my 9900 bold when i use to type the first letter all my contacts that start ed with an A show in a list and then i scroll down untill i find who i was looking for. Not my beloved classic why?

Robone18 wrote:
When i type the first letter of a contact for example the letter A nothing shows. On my 9900 bold when i use to type the first letter all my contacts that start ed with an A show in a list and then i scroll down untill i find who i was looking for. Not my beloved classic why?
So what happens when you press the letter A for example?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Nokia 701 Contact Search Problem

Hi!
I recently formatted my Nokia 701 using code *#0000#
Now when I search for a contact in the search list, it uses the regular keypad (as used during message typing) Instead of the alphabetic keys..
Attachments:
SC001.JPG ‏55 KB

To turn the keypad into qwerty keypad, follow these steps:
Go to Settings>Phone>Language>Writing Language>tap on the language that has a check mark on it (example: English)>Input style for portrait>Qwerty

SIM related issue

Hi, I have created some workflows and forms which i have already imported using the admin user. But when i login as a user and try to access the workflow from a link, I get the following error message
Message:
'View access denied to AAA001 on process Initiate Bulk Unprofiled Application Access Request.'
Please let me know if i need to configure something.

I believe you logged in as a user and try to call ur workflow by clicking the link.
Inorder to access the workflows from user page, you have to put entry in "End User Tasks".
<List>
    <List>
      <String>End-User Test Process</String>
      <String>An example end-user workflow</String>
    </List>
</List>

Weird SIM contact registration problem

I have a weird problem with my Nokia 6230i. When I try to save a new contact to my SIM or copy from phone memory to SIM (name length fits to SIM restrictions) I get an error message telling the attempt was unsuccessful even though SIM memory has enough space.
However, when I turn off and turn it back on the phone I can see the new contact has successfully saved/copied to SIM. I couldn't solve this weird problem. My SIM card is a newer one and I can use it on another Nokia without any problem. I also tried another SIM on this phone, still no success. Can anyone help me on this issue?
The firmware version is 3.88.

That is because iPhone sim cards do not store any information on them to be transferred in the first place.
You cannot store anything on the sim card of an iPhone - it is just not possible.
If you want to transfer information, then connect the phone to iTunes and do it like this as was intended, but you could wait even longer than all night and nothing would happen wth a sim card, because it's not possible.

E52 Contact search entry problem arising after lat...

Press the Contact button once, the Contact list screen shows up. At the bottom of the screen is the search bar. When I press any of the alpha-numeric keys, the alphabet (or number depending on how many times I press the same key) appears momentarily but disappears within less than a second. So now I CANNOT do a search. I have to scroll up or down!
I've since tried multiple things: re-boot phone several times, take out sim card + mem card and then do software reset, re-install the firmware under Ovi Suite's Software Update menu option. None help so far.
Can someone help please?
Solved!
Go to Solution.

peteralmere,
Answers to your questions are no to all. But I don't see why such legitimate usages (off phone overnight, batt out > 25min) should/can mess contact search. This simply should not happen in any phone, even the cheapest entry level phone.
Is 2 contacts too many to have ? As I mentioned, it did't work even with just 2 entries (all entered in English) in my experiment.
It's a firmware issue that the E52 firmware development team messed up and their validation team missed. Not the issue of how I use my phone or how many contacts I've got.

Error searching for from role provider Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.

Hi,
I am trying to configure FBA with ADLDS on SharePoint 2013 Enterprise.
I have edited, web.config files for Central Admin, Security Token Application and Claim aware WebApplication.
<PeoplePickerWildcards>
<clear />
<add key="XXPROVIDERMP" value="%" />
<add key="XXPROVIDERRM" value="%" />
<add key="AspNetSqlMembershipProvider" value="%" />
</PeoplePickerWildcards>
<membership defaultProvider="i">
<providers>
<add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERMP" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" userDNAttribute="distinguishedName" userNameAttribute="userPrincipalName" userContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" userObjectClass="person" userFilter="(|(ObjectCategory=group)(ObjectClass=person))" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
<providers>
<add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERRM" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" groupContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" groupNameAttribute="cn" groupMemberAttribute="member" userNameAttribute="userPrincipalName" dnAttribute="distinguishedName" groupFilter="(ObjectClass=group)" scope="Subtree" />
</providers>
</roleManager>
When I am trying to find user in People Picker, getting error
Error searching for "XXUSER"from role provider "XXPROVIDERNAME" Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.
Has someone else faced this issue?

Figured it !
Account which was accessing FBA didn't had permission on it.

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

How do I erase contacts on my SIM card?

I upgraded from an original iPhone to a 3GS. Afterwards it seems that I have duplicate contacts because my SIM has contacts stored on it. How do I erase the SIM card so I don't have this problem with duplication?
Any ideas would be greatly appreciated.

As provided, there are no contacts on your SIM card.
The duplicate contacts issued has been asked and answered on these forums many times.
You can do a forum search and find out more.

UI Problem: Tab render Issues on page navigation

Hi All,
I am with a ADF application using jDev11g where i have some JSF pages and have navigations between those pages.
In the first page i have two tabs.
In the second tab of that page I have put the ViewObject (ViewObject is based not base on Query, ie. not on any Entity Object) attributes as input text fields.
After that i have a Search page next where i search on some conditions and from the result table I select a specific row and catch its column values. Using the row record I populate the viewObject of that first page while clicking on a button on the second page (this button calls a AppModuleImpl class method to populate the ViewObject).
Till this it works fine. But there are some UI related issues associated with it.
Query--1:
Approach 1: As i have dropped a View Object as inputText and it is not populated on on the first go it will have label field but the value field will not be rendered at all. But this doesnot meet the UI requirement. I need to have a value field (white box with no data). How to resolve this? Are there any property for that to render.
Please suggest.
Work Around: For this problem i applied a work around by dropping some extra input texts beside the VO attributes (as text field without label) in my 2nd tab of first JSF page. And while navigating to second page i made these extra i/p fields as hidden (through Disabled/Rendered property) in the backing bean.
Then i populate the ViewObject from second page and returned to the first page(default goes to first tab) and opened the 2nd tab i found all the extra nput text fields visible which i had disabled. Can you tell why it's happening?
Please suggest for these 2 approaches.
Query--2:
Is there any way that when i navigate back to the first page by default the second tab will open instead of the first?
Please suggest.
Thanks in advance.

Hi,
Query--1:
Approach 1: As i have dropped a View Object as inputText and it is not populated on on the first go it will have label field but the value field will not be rendered at all. But this does not meet the UI requirement. I need to have a value field (white box with no data). How to resolve this? Are there any property for that to render.
Please suggest.
an input field need an object to write to to display the input area (otherwise its read-only). So you can create your input form pointing to a managed bean initially any then, when users enter and submit data, save it manually in ADF and after this hide the bean bound fields and show the ADF fields. Or - before getting onto the page - you create a new row if the current collection is empty.
Short answer: there is no declarative way to do this
Is there any way that when i navigate back to the first page by default the second tab will open instead of the first?
Please suggest.
The ShowDetailItem component that is used to render tabs has a Diclosed property that you can point to a managed bean method. When you navigate back, you have the managed bean returning false for all but the second tab.
Frank

6230i Contact search problem(Sim related issue?)

Similar Messages

Maybe you are looking for