6230i Select standard phone number in Outlook

I have multiple phone numbers for every contact in Outlook and I am synchronizing my contacts with my handset.
In my car I am using a bluetooth interface that utilizes the in-car display. Unfortunately the in-car system only shows the default (or standard) phone number for each phone book entry.
Now I need to go through my entire address book and set the standard phone number for each entry manually in the handset. This is awkward and painful. Can this be done somehow in Outlook? So that it synchronizes also the flag for the standard number into the handset?

Hi Tia8,
If you are having issues with iMessage and your phone number, you may find the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
- Brenden

Similar Messages

  • I cannot select my phone number in my appleID for imessages!

    i cannot select my phone number in my appleID for imessages, and i dont know why! its there but will only let me pick my email address.   and when i try and change the phone numbers in my appleID settings, it says i have invalid phone number, when i KNOW it is valid.
    please help!!

    Hi Tia8,
    If you are having issues with iMessage and your phone number, you may find the following article helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    - Brenden

  • Selecting my phone number as an address on iPhone 4

    I changed some settings on my account and now I can't select my phone number on FaceTime or iMessage in my settings to receive messages or FaceTime calls. Can someone tell me how to add it please? Thank youuu

    turn off imessage and facetime and then back on and see if it activates your number.

  • IMessage not selecting my phone number, its "greyed" out.

    I have an iPhone 4S and it was on a monthly 02 contract but I have not terminated my contract with O2.  I had my iPhone unlocked so I could use it on any network.  I now have a Vodafone sim card in the phone and am on PAYG.  However my iMessage is not working properly.  When I try to active my iMessage my phone number is "greyed" out so I cannot send messages via my mobile number ...so can only send text messages.  I did use the Vodafone sim card in my iPhone whilst my number was being ported across so it did have a temporary number.  However, now my original number has been ported across I can no longer select it under iMessage as it is "greyed" out. 
    How do I resolve this?

    Still Problem... I delete my account ID from My daughter's phone and used her iCloud email account and both of us still have same massage "waiting for activation for Message and face Time setting. Still I can see my daughter's phone number in my phone "you can be reached by face time at" and I can able to check it as well as my e-mail address but my phone number is greyed out... Ok just want to verified I can't able to face time using my phone number anymore? I don't have any option to delete my daughter's number or my e-mail address only I can add e-mail's.... I tried trouble shootings step by step but still stack in same way...` any suggestion ?

  • I can't select my phone number for iMessage (-sigh- Yeah, this problem again)

    Let me explain the whole scenario:
    My iMessage and FaceTime worked perfectly fine this morning.
    I turned off my iMessage to check if I would be able to get messages from other iPhones.
    My observation is that when an iPhone has their iMessage turned off and someone else who sends an imessage to that phone, their message would automatically turn to "text" messages instead of imessages. (Whoa, that sounds a bit confusing).
    Anyway, I turned my iMessage back on and what do you know, I can't click my phone number because it's grey
    I'm only able to select my emails. So for "send and recieve" it says "No address" (Because i didn't select anything, I'm waiting for my phone number to 'magically' get selected)
    I have tried so many things and it's irritating.
    My Facetime worked well, I would turn it off and back on and my number would get selected instantly. And I messed around with it, turning it off and back on to see if it'll automatically choose my number and it did. But I turned it off and on again and now It doesn't choose anything, it just says "Waiting for Activation"
    But now after so many attempts of trying to turn it off and back on just to fix this iMessage crap, I can't even sign in to my apple id anymore. It says that I can't sign in and that I need to check my network connection. (I'm using wi-fi. And it's working perfectly fine; My network connection is fine)
    So now, I'm really screwed. my iMessage and Facetime don't work anymore.
    I'm really looking for a solution to this annoying problem.
    By the way, it's an iPhone 4s and my carrier is T-Mobile.

    I had the same issue. I cannot tell you why it happend although it may be tied to me changing my Apple ID passowrd.
    Regardless, this was the solution for me:
    Go to "Settings" on your device (I used my iPhone 5s).
    Scroll down and select "Messages".
    Select "Send & Receive".
    Touch your "Apple ID: [email protected]" (top line in blue text).
    Touch "Sign Out".
    From the Messages window turn iMessage back on and sign back into your Apple ID account.
    Your phone number should now be selected by default. Select the email addresses you also want assoaciated with your iMessages account and click "Next". It will verify your info and your DONE!

  • My texts are sendin from my email not my phone number and I can't select my phone number only the email button

    It will not allow to select my mobile number to send an revive message only lets me select the email

    Go to Settings/Messages and log out. Do the same for Settings/FaceTime. Then go here: https://selfsolve.apple.com/deregister-imessage and deregister the old number. Finally, log back in to Settings/Messages and FaceTime.

  • Adding a line to a family plan online - selecting a phone number

    I am on a family plan.
    I understand that if I change the number for an existing line, I can only select from numbers in the same area.
    However, if I add a new line to the account, will I be able to select an area code from a different part of the state?
    Thanks,
    Robert

    Yes - we added a line for my Mom to our family plan, and she lives across the country. We were able to get her a "local" number for her area in NY state, while all the rest of our #'s are local to us in California.

  • My iMessage won't let me select my phone number for 2 days now, i have tried everything. My phone number is a grey colour and I can't get a tick to appear beside it. I have signed in and out,turned on and off!HELP please!

     

    As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
    That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
    Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
    https://discussions.apple.com/thread/3305461

  • HT5538 Is there anyway I can use just my phone number as my iMessage contact, I can't even select it with my email as it is greyed out

    I Have an iPhone 5S and I'm just wanting to use my phone number as my iMessage contact. It only comes up with my email and everyone I iMessage say it only comes up with my email that is enabled and I want to just use my number to have the contact still saved. When I go to enable my number it is 'greyed out'

    Hi Aylamcguire,
    Welcome to the Apple Support Communities!
    Make sure “Start New Conversations From” is set to your phone number. If it already is and/or messages continue to be sent with email address, it may be necessary to delete the message thread you already have going and start a new thread after your phone number is selected as the way to start a new message. 
    iOS: Troubleshooting Messages
    Select your phone number when Sending iMessages in Settings > Messages > Send & Receive > Start New Conversations From.
    Have a great day,
    Joe

  • Why cant select phone number for Send & Receive on iMessage

    I want to select my phone number for send and recieve on iMessage but it is only letting me click my e-mail adresses. How do I go about solving this? It only happened when I switched over to the 5C from my 5 on iOS 7. Help!

    On your Mac, start Messages > Preferences... > Accounts
    Make sure your Apple ID is selected and enabled
    You can be reached for messages at:
         Your iPhone number is checked (Yes, it's grey out) 

  • Iphone 6 not sending imessage from phone number

    I got my iPhone 6 yesterday and this morning whenever I try to use iMessage it gets sent from my icloud address rather than my phone number. I went into settings > messages and tried turning imessage on and off, which did not work. I also tried just selecting my phone number instead of the email addresses listed and the messages do not send. Signing in and out of my apple account doesn't solve any issues either. Using imessage on my macbook uses just my icloud, too. Any tips?

    SO....The same issue arose AGAIN!!! So I did the HARD RESET, and I realized..... to avoid this from ever happening in the future....
    This is the only thing that fixed it I was so stumped! Thank you, I had previously tried just a standard restart , also signing in and out of imessage and apple id several times.... but the hard power down is the only thing that fixed the problem. HighFive
    AFTER HARD RESET (PRESSIN THE TOP AND LOWER BUTTONS AS SAME TIME)
    POWER ON
    AND APPLE IMESSAGE WINDOW WILL POP UP AND ASK IF YOU WANT TO USE YOUR EMAIL WITH YOUR IMESSAGE, IT WILL ASK FOR YOUR APPLE ID.....
    SELECT CANCEL!!! DO NOT PUT YOUR PASSWORD IN BECAUSE IT WILL THEN SET YOU UP FOR EMAIL TO BE USED FOR YOUR IMESSAGE, IF YOU CANCEL THAT WINDOW, IT WILL ONLY USE YOUR PHONE NUMBER, AND WHEN YOU ARE NOT AVAIL FOR IMESSAGE IT WILL SEND THE MSG VIA TEXT INSTEAD OF IMSG OR EMAIL...THIS IS THE BEST SOLUTION AND SINCE I HAVE HAD NO PROBLEM GETTING OR RECIEVING IMESSAGE
    Good Luck! Happy iPhoning
    jmew wrote:
    This is the only thing that fixed it I was so stumped! Thank you, I had previously tried just a standard restart , also signing in and out of imessage and apple id several times.... but the hard power down is the only thing that fixed the problem. HighFive
    habby3 wrote:
    Restart your iphone holding both buttons down (top and bottom) - it worked for me as my number had turned gray as well.
    Good luck

  • HT3529 How can I get my MacBook Pro and my Ipad2 to send messages from my phone number instead of from my e-mail (apple ID)?

      I want the same conversations on my ipad and MacBook as I do on my iphone 5.

    Hi smellymellly,
    On your Mac open the Messages app, click on Preferences>Accounts>Start New Conversations From:
    Select your phone number from the list
    On your iPad, go to Settings>Messages>Send & Receive>Start new conversations from:
    Select your Phone number from the list
    Cheers,
    GB

  • All of a sudden this morning my iphone will not send imessages from my phone number but only from my email address. When I go to the settings for my imessages to choose where they are coming from my phone number is greyed out....Is there a way to fix this

    All of a sudden this morning my iphone will not send imessages from my phone....

    Hi Chas869,
    Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
    ErinW_VZW
    Follow us on Twitter @VZWSupport

  • HowDoI copy a phone number from a contact and paste it into a text

    Z10 HowDoI copy a phone number from a contact and paste it into a text message?
    Help Please. It should be so simple but in the maze of approaches to contacts from the phone or home screen which ever way you get there; how do I select a phone number, copy it and paste it into a text message to another contact so that I can send it on?
    The logic of the interface is totally baffling to me most of the time. Can't there just be one contacts interface so that when you enter it from anywhere it presents the same options to edit etc. Cannot the three blobs be called up to allow a proper edit menu - copy/cut/paste/delete.
    Can the favourites be held permanently in screen at the top with the rest of the contacts scrolling below them?
    Can it be set up so that contact pictures do not show to save screen space?
    Any help on any of these - much appreciated.
    Solved!
    Go to Solution.

    Hey jbee,
    Welcome to the BlackBerry® Support Community Forums.
    How Do I copy a phone number from a contact and paste it into a text message?
    The only option would be to to select the edit option on the contact and hold your finger on the number and select the copy option on the left side panel.
    Can the favorites be held permanently in screen at the top with the rest of the contacts scrolling below them?
    This feature is currently not available. 
    Can it be set up so that contact pictures do not show to save screen space?
    This feature is currently not available.
    Let me know if you have any other questions.
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • IMessage and FaceTime not working with phone number.

    Hi guys,
    I've had this issue for days. My iMessage had been linked with my email. So I sign out of "my Apple ID" to enable me select my phone number as my preferred option for use. Unfortunately, I have my former phone number (which does not exist anymore) in grey and not my present phone number. So I'm stuck with my old contact and my email address for iMessage and FaceTime. I have tried toggling iMessage off and on, it keeps me on "waiting for activation" mode, deducts some airtime for SMS charge but still goes back to "iMessage unsuccessful".
    Guys what can I do to link my active phone number to my iMessage and FaceTime.

    Hello Walidou,
    I've gone through the text, thanks. But it doesn't give me a solution still. It says if after waiting for activation for 24hours it doesn't still work, then contact apple support. You see it still brings me back here.
    Infact, as I'm writing this my airtime is still being deducted as SMS is being automatically sent to some random number like "+447537410257"

Maybe you are looking for

  • Importing CD problems

    I have a new Dell desktop running win 7 pro with the latest ver of Itunes. I am in the process of loading my entire library (2000 CD's) into Itunes. Sometimes Itunes stops accepting CD's(CD is inserted but nothing happens..no error codes or notices) 

  • Windows task bar locks when .vi is running

    The Windows task bar locks when the .vi is running. How do I enable the windows task bar so I can multi-task when my .vi is running? Is this new with LabVIEW7?

  • Crystal Reports and UCCX

    I am running UCCX 8.0(2) and I am trying to connect Crystal Reports to the database but the documentation states only V11 will work is that really the case? We are not able to get Version 11 only Version14 is now available. Is there anyone running th

  • Print queue stops automatically

    when trying to print a document (from whichever program I've tried), the document appears to be sent to my printer (Lexmark Optra R plus), but then the print queue automatically stops. After I start the the print queue again, the printer works for so

  • *****output File format

    Hi all, Instead of Time stamp in the out put file ,we require the out put file format as xyz_a.txt,xyz_b.txt....... eg:file name sample.txt out put required is sample_a,sample_b,sample_c...... is it possible in Xi? Thanks, Srinivasa