6230i very slow + lost files

just over night my 6230i has lost files from the MMC card and lost the ring tone that i set for it, also it has become very slow in accessing the menu's, which sometimes it reverts back to the wallpaper,and sometimes it doesn't respond to the buttons i press, does it need a firmware upgrade?, it's on v3.40Message Edited by bjproc on 07-Jan-2006
12:22 PM
6300

I think the problem could be the kingstomn memory not being Dual Voltage, just by reading other posts.
6300

Similar Messages

OSX 10.6.7 copy photo to network drive very slow preparing file

I want copy photo to folder ID Photo Server 2011 on NAS ***(folder ID Photo Server 2011 have photo about 3000 pic.) When I drag file to ID Photo Server 2011 it preparing file very slow.

I am having the same problem. It just started a week ago. I'm a photographer. I would take a data card full of photos and copy them to a folder on my desktop. I always make sure the file volumes match after the transfer is complete. Then after I eject the compact flash drive, I check the file volume again on the desktop folder before I reformat the flash drive.
In this case when I went back 24 hours later the folders were emissing files or totally empty. I just lost two days of event shooting and I'm going to have some really ****** off customers if I can't retrieve the files. There are roughly 700 digital photo files that are just gone. I don't even know the exact file names because I delete some images as I shoot.
Is there any way to see if these files are still on the drive and just missing their file names?

Windows 7 + Office 2007 & 2010 VERY slow saving files to on 2008 R2 files shares

OK I have litterally tried everthing in every forum there is to resolve this. It is only happening on our Win 7 workstations that are running Office 2007 or 2010. Our file shares are on a 2008 R2 server. Opening and saving files on the shares using
Office is very slow. I have tried updates and server and workstations are 100% up to date. The server is only running as a file share server. Nothing else on it. We have completely set up new PC's to test with clean Win 7 installs and nothing else except Office.
Nothing else on the network is slow at all. I have tried all the hotfixes in the world that could relate to this from many hours of research into possible causes. I have done the EnableShellDataCaching fix, the SMB 2 disable fix, the windows search/indexer
fix, the pdfmaker fix, the lookup wizard add-in fix, the go to the newest firmware on the cisco switch fix, update workstation nic driver fix, the Trusted Locations in Excel fix, and about a dozen other fixes. NOTHING WORKS! This has brought our Win 7
and Office 2007/2010 users to a halt in their ability to do their jobs. Our company is suffering badly. And did I mention that our IT dept is getting a lot of heat and criticism about it. FYI we are running an IBM E5450 with dual multi-thread
multi-core(8) 3 Mhz Intel Xeon processors with 2008 R2 64-bit, 12 GB ram, and the server is using litterally no resources. Network connected is Gigabit. This has to be a Microsoft issue with 2008/Win 7/Office 2007&2010. This has become a nightmare for
out IT dept and has consumed weeks of our time when we need to be working on other projects. Can anyone solve this. Microsoft: Please release a REAL fix for this that we can run on the server or push via GPO to the workstations.

Hi,
Take a look at this and see if it helps:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
also
Office 2010 components, such as Word 2010?
At this time, I suggest trying to start Excel in safe mode. Then, open the Excel file or create a new Excel file, and save the file to the network again.
Start the Excel program in safe mode
1.       Click Start, point to All Programs, and then point to Microsoft Office.
2.        Press and hold the CTRL key, and then click the Microsoft Excel.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Excel program:
Disable add-ins
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there are any add-ins, clear the checkbox to disable them.
Close the Office program and restart it.
Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.
====
Is the performance also slow when you trying to save the Excel file to other network path?
At this time, we can also try to test this issue in the clean boot mode.
Test in Clean boot Mode
===============
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3.       Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.
What’s the result now?
How to return from the Clean Boot state
After the troubleshooting, we can return from the clean boot state:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.       On the "General" tab, click "Normal Startup - load all device drivers and services".
3.       Click OK. Click Restart when you are prompted to restart your computer.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Safari very slow downloading files

When I bought my MacBook Pro in 2009 I used Safari for few days then I switched to Firefox, and the reason for that is that downloading any kind of files goes very slow to around 5 KB/s while downloading the same file in any other browser is so fast. Now after the release of Safari 4 I thought this problem could be solved but here again the exact same problem and I really love the new safari except that this problem is really annoying me. By the way browsing is working perfectly fine.
I have a 2 Mpbs ADSL connection.
any idea?

Preference files retain information about the default and custom settings for a particular application. Also, they store information accumulated over time not directly related to a preference setting.
In Safari's case, this retained and accumulated information comes from a variety of sources within and outside of Safari. For example, 3rd party add-ons, such as Glims, store information in the preference file pertinent to their operation and settings.
Sometimes, corruption occurs if this information is incorrectly coded in the software. In that instance, as Safari accesses the preference file, it will crash due to a flaw in the data stream. Another example - updating Safari from one version to the next might trigger corruption if the 3rd party content within the preference file is not compatible with the new version's operation.

InDesign CS 5.5 very slow open file

Hi,
I've a problem with inDesign. When i shift from a file to another, it is very slow.
I 've to work with a lot of file ( 8 or 9) open concurrently.
Every file is about 200 Mb.
this not happen using inDesign CS4 (on the same MAC, before upgrading to CS 5.5)
Here my MAC configuration
Imac Intel core i5 2.5 Ghz
8 Gb RAM 1333Mhz DDR3
MAC OSx 10.7.4 updated
Indesign CS 5.5 update to 7.5.3
Anyone can explain me ????
Thanks in advance

Look in the upper left corner of your screen. I’ve seen instance where the program opens with nothing but a tiny window there.
If that doesn’t do it, then restart Windows.
Bob

Very slow attaching files to Yahoo Emails and Browser Plus will not set up.

Very slow uploading attachments to my Yahoo Emails. I tried their "Attach files more easily", but "Browser Plus" hangs at "Almost done...(You don't need to do anything) " screen. I have Windows XP, Firefox 3.6.6 and only use Yahoo for emails. Yahoo are no help, could it be browser settings?
== This happened ==
Every time Firefox opened
== About a week ago.

Walter2323, Sorry to learn that you are having this issue and welcome to the HP forums,
Have try using this tool to install the printer GO HERE give it a try please let me know if you encounter any errors.
Another Step that I will take is to disable all securtiy applications before installing the printer this will ensure that one of this application is not blocking a critical process needed to properly install the printer.
Are able to print from the computer via usb and/or wireless?
Hope this helps and let me know if I can assist you any further;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Acrobat 9 Pro very slow open files over network in Windows 7

I have installed Acrobat 9 pro on my new PC. It's running Window 7 64bit. I use it for pre-press of high-resolution files for printing. Sometimes the file sizes run into the 100s of MB.The new PC has reasonably high specs, with 6Gb of RAM and a 2.8Ghz Quad core i7 CPU and gigabit networking.
Opening them when on the local hard disk is reasonably fast. For example a multi-page 400Mb file starts drawing the first page withing 3 seconds. But opening the same file when it's on the server of our gigibit network generates a very long pause. The application locks up and dispays a "not responding" message for 2-3 minutes. The bigger the file, the longer the pause. It doesn't completely crash -- eventually it starts to draw the pages and I can work as normal.
I used to have Acrobat 9 pro on my old XP PC which was a cheap low-end machine when bought 3 years ago. (has on-board shared RAM graphics card and only 1Gb of RAM). But what grieves me the most, is this slow old machine will open the same 400Mb file off the server so much faster than my expensive new machine. There is no lock up and it begins drawing the first page after only approx 5 seconds.
The problem doesn't seem to be simply related to slow network speed. I can copy the entire 400Mb file from the server to my hard disk in only 12 seconds. The old PC is actually slightly slower copying to/from the network. If the application was for some reason copying the entire file into memory or to a local cache, this should still only generate an extra 12 second delay -- not 3 whole minutes.
Adobe Reader 9 doesn't have the problem. I can open the 400Mb file off the network on either my new or old machine within seconds.
Acrobat 9 Pro doesn't have the problem on an old G5 mac either. It's somewhat slower than my old PC but will begin drawing the first page after a few seconds,
So what exactly is Acrobat doing for those 2-3 minutes?
I have already tried:
1. changing network ports/cables.
2. disabling anti-virus software
3. disabling "remote differential compression"
4. Patching Acrobat 9 to 9.2
5. Files located on Windows servers and Mac Xserves.
Not improvements from any of these.

I think I have isolated the source of this problem. It's the Pitstop Professional 9 plug in. I un-installed this, and everything opens quicker than greased lightning. I re-installed it and it's back to slowsville.
Unfortunately Pitstop is essential to my workflow.
Until recently I did my pre-press on a Mac G5 with Acrobat Pro 7 and Pitstop 6.5. I never had this problem with slow file opening. But it seems that the delays would occur when I used the plug-in with large complex files.. So it would open files as fast as you'd expect from an elderly machine. But starting to use Pitstop would result in a prolonged period of staring at a spinning beachball.
I wonder is there any way to stop the Pitstop plug-in from initializing until it is used? So the plug-in stays inert until you select the tool from from the menus.

Very slow network file transfer speeds with WRT310 + Powerline PLS300

Hi guys-Thanks for looking!
I have Charter hi-speed (10MBS) with my wireless N router (WRT310). Connected to my router is the PLE300 Linksys powerline adapter. I have two PLS300 powerline adapters. One feeds my computer and my wife's computer in the den and the other feeds the playstation, xbox, NAS Black Armor media server in the media room.
In running speed tests online, I get >10 MBS on both ends of the powerline adapters so surfing the internet is very fast on both ends. I also have very fast file transfers from my wife's computer to my computer across the same PLS300 adapter
However, in transfering files to my media server from my computers, I get speeds of 500 kbs. If I try to stream video files (non-HD) to my PS3, the video stutters to where it is unwatchable. I have also tried to bypass the powerline adapter by just using a wireless N gaming adapter and that yielded similar slow results.
I am running Windows 7 on both computers. I have removed the firewalls and McAfee.
Again, thanks for looking and happy new year!

Reduce the MTU to 1350 on the router and check if that helps...

Adobe reader x very slow opening files over vpn to samba share

Takes 2 to 3 minutes to open a file - Acrobat Pro v7 accesses immediately - downgrade
to Acrobat 7 reader works fine - true on XP and Windows 7 - all updates installed.

I think I have isolated the source of this problem. It's the Pitstop Professional 9 plug in. I un-installed this, and everything opens quicker than greased lightning. I re-installed it and it's back to slowsville.
Unfortunately Pitstop is essential to my workflow.
Until recently I did my pre-press on a Mac G5 with Acrobat Pro 7 and Pitstop 6.5. I never had this problem with slow file opening. But it seems that the delays would occur when I used the plug-in with large complex files.. So it would open files as fast as you'd expect from an elderly machine. But starting to use Pitstop would result in a prolonged period of staring at a spinning beachball.
I wonder is there any way to stop the Pitstop plug-in from initializing until it is used? So the plug-in stays inert until you select the tool from from the menus.

HDV 1080p30 very slow when files are from Shake

Hi,
I have a totally tricked out 8 core Mac pro with 8 GB ram and a 1 TB drive (mostly empty). I'm using the Latest FCP. Recently, I've been editing some HD video that I've shot and have been quite pleased with the performance of the machine/software. However, I am experiencing a weird problem. I also have Shake, which I am using to do some composting and, relevantly, remove a small amount of camera vibration from my footage. (It works great.)
However, any files that I export from Shake, using (as best as I can tell) the exact same file formats and codecs that my imported Raw (unprocessed in Shake) video is. That is: they are quicktime files, Using HDV 1080p30fps, with 29.97 FPS "drop frame" codec. While the raw imported files work great, the files I export from Shake and put into my timeline result in a "Spinning Ball" whenever I do anything at all to them- play them, move the timeline around, cut, apply a filter etc,. What am I overlooking?
Brad Hoehne

Hi Kunal
Let me explain to you how this works
When you archive the data, it moves out of the database into a flat file which is latter stored on optical disk/hard disk etc depending upon your archiving solution
When archving is done, it also creates an index ( depending upon how your have configured the object) This index is of few common fields of the archived objects . This is than stored within SAP. When you call SARI you seen this indexed data from SAP and hence the response is quick. At this point it does not get the data from your archives
When you call it through the transaction FBL.. , it needs all the fields ( which are not avl in the indexed data ) and hence SAP has to go to the archives to fetch it
This results in slowing it down.
Now how slow will it be is a difficult question for us to answer as a lot denpends upon your archiving solution and how much data are you trying to fetch
As far as memory problem is concerned you need to analsye the dump as to where ( on what buffer parameter is it failing) Depending upon that you will have to either increase memory parmeters OR reduce the amount of data your a fetching
Thanks
Naushad

PP suddenly very slow loading files, generating peak files

Project from yesterday suddenly extremely slow loading, syncing files and generating audio peak files. Using PP 2014.2 on HP Z800. SSD system drive, internal raid and three USB 3 drives connected to USB3 pci-e card. Suspect drive could be hanging up but not sure how to test since all was fine last night. Files are HD 23.98 quicktime prores

I also notice my CC connection needed to be reset several times. The Control Panel internet settings keep switching back on LAN from Automatically detect settings to Use a proxy server. My computer is dual 5650 processors, 24 g ram, so don't see that as problem, especially since this worked yesterday.
Could really use help ASAP
Thanks

Very Slow Copying Files

I have My External Hard Drive connected to my air port extreme base station. I have the latest firmware update. While copying files or using time machine to back up my computer, the speed is extremely slow max speed is 2.2 mpbs but bounces from 200kbps to 2.2 mbps constantly. I am with in 5 feet of the base station everything else works fine including internet speed.

i have the same problem over here. Been looking around the internet, tried different configurations, nothing helps. 3min for 15M.
just wondering: is it possible my file is transmited over the internet and back, instead of directly over the local network to my Airport disk or other computer?
Not sure if it has anything to do with it but when I look at my filesharing config, it says: Other users can access shared folders on this computer, and administrators all volumes, at afp://xx-xx-xxx-xxx.access.telenet.be/ or "yyy". where x is my IP and yyy is my bonjour-name.
why is my provider in that afp-path?
anyone any idee?
Thx

Very slow network file transfer speeds

We just moved and I've now connected our imac and macbook to our network. This time rather than running cables I thought we'd run the imac and the macbook off of our airport extreme. After a bit of repositioning and fiddling I've got a strong signal throughout the house and the internet connection is great. The problem I'm having though is network file transfers are really, really slow. I can't get anything over 2MB/sec on either mac, and it is way slower on the macbook than it was previously. From NetStat it looks like there are some bad connections and overflows, is there anything here that might point to a problem? Thanks in advance for any suggestions. NetStat results for tcp:
tcp:
          2008646 packets sent
                    493362 data packets (220223075 bytes)
                    614 data packets (581572 bytes) retransmitted
                    0 resends initiated by MTU discovery
                    1209277 ack-only packets (660 delayed)
                    0 URG only packets
                    0 window probe packets
                    287951 window update packets
                    17519 control packets
                    0 data packets sent after flow control
          4266748 packets received
                    445311 acks (for 219872269 bytes)
                    6482 duplicate acks
                    0 acks for unsent data
                    3963598 packets (916287602 bytes) received in-sequence
                    833 completely duplicate packets (462217 bytes)
                    21 old duplicate packets
                    0 packets with some dup. data (0 bytes duped)
                    41154 out-of-order packets (54419239 bytes)
                    0 packets (0 bytes) of data after window
                    0 window probes
                    778 window update packets
                    388 packets received after close
                    0 bad resets
                    2 discarded for bad checksums
                    0 discarded for bad header offset fields
                    0 discarded because packet too short
          10085 connection requests
          322 connection accepts
          11 bad connection attempts
          21 listen queue overflows
          7976 connections established (including accepts)
          10720 connections closed (including 654 drops)
                    385 connections updated cached RTT on close
                    385 connections updated cached RTT variance on close
                    99 connections updated cached ssthresh on close
          2218 embryonic connections dropped
          444482 segments updated rtt (of 414903 attempts)
          2348 retransmit timeouts
                    61 connections dropped by rexmit timeout
                    0 connections dropped after retransmitting FIN
          4 persist timeouts
                    0 connections dropped by persist timeout
          39 keepalive timeouts
                    0 keepalive probes sent
                    29 connections dropped by keepalive
          11651 correct ACK header predictions
          3699704 correct data packet header predictions
          37 SACK recovery episodes
          176 segment rexmits in SACK recovery episodes
          228486 byte rexmits in SACK recovery episodes
          1598 SACK options (SACK blocks) received
          35961 SACK options (SACK blocks) sent
          0 SACK scoreboard overflow

help?

Very slow Word file import on RoboHelp HTML 8

Hello,
I am currently using RoboHelp HTML 8.0.2 on Vista 64-bit and when I import Word files (both .doc and .docx) it takes a really long time to complete (10-15 minutes for a 200pg/50topic/10MB Word file). Is this normal? At the end of the process it says "Updating Word file..." on the progress bar, and hangs up here for ~10 minutes. What exactly happens during this stage?
The Word file has a bunch of pictures and equations in it, was made using Word 2007, and is a pretty normal file otherwise.
Let me know if you guys need more information.
Andy

That is a pretty big document but it does still seem quite a time. You don't say what happens if you import smaller docs into a test project. Is the doc local?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Ix2-200 VERY slow accessing files via osx 10.10

ix2-200 running fine. Drives are good. Using latest firmware 2.1.46.30093.
Can manage via browser just fine.
Connect to server using smb ipaddr and it mounts up just fine.
I can open the directory (using osx 10.10.1) with finder just fine, but when I try to access the files within the directory, nothing shows up (I know the files are there) and can hear/see drive activity (blue light flashes). If I wait an hour or so, I can start seeing files. Since this is a laptop, it's not possible to always leave it connected and waiting at least an hour after connecting to it is not acceptable.
How can this issue be resolved?
Thanks
Bill

Hello morber
Try connecting to the ix2-200 via AFP instead of SMB/windows file sharing on your Mac.
Finder> Go> Connect to Server, there enter the ip address of the unit and proceed. It should ask which share folders to access and if secured, enter the NAS user account credentials.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

6230i very slow + lost files

Similar Messages

Maybe you are looking for