6230i wierd error with phone when connecting to bl...

I have had it working on my old computer, and now when i am trying to get it to work on this new computer, i get this error...
http://img123.imageshack.us/img123/8444/problem15lv.jpg
.....Message Edited by titch2349 on 13-Feb-2006
06:41 PM

The new PC Suite will want the older version uninstalled first.
I suggest doing a backup of your phone contents.
Then backup your PC (if running XP set up a system restore point).
Copy the existing PC Suite folder (and contents) into a zip file - you need to stop PC Suite from loading automatically to make sure you can copy all the files.
Then install the new PC Suite.
If the PC copies of the images etc are no longer present then copy them back from the zip file.
But....
Before you do all that - make sure your PC Bluetooth drivers and firmware are up to date. The 6230i only uses 'Component' key pairing whereas most existing (older) equipment uses 'Unit' key pairing.
Also the Microsoft XP SP2 Bluetooth is Microsofts version of Bluetooth which is not entirely compatible with everyone elses Bluetooth.
The latest Belkin Bluetooth firmware and software does work with the 6230i.
goodluck
SteveMessage Edited by stevemess on 14-Feb-2006
10:13 AM
Tech. Project Manager
Reuters

Similar Messages

Error with iTunes when connecting for first time.

Here is the error that I get when I connect my phone to my computer:
The software required for iPhone is not installed. Run the iTunes installer to remove iTunes. then install iTunes again.
I have the latest version on iTunes installed (7.3). I have tried removing itunes and reinstalling 4 or 5 times. Evan restarted my computer few times too. I'm running Vista so not sure if that's the problem.

Hi Bigrash,
Close iTunes, and disconnect your iPhone from your computer.
Go to "Control Panel", and go into "Programs".
Select "Installed Programs".
Here, find "Apple Mobile Device Support" from the list, and click on it. From the "File" menu, select "Change/Remove", and then click "Remove".
After that application has been fully uninstalled, go to this page, to download another copy of the iTunesSetup.exe installer:
Download iTunes - 7.3.0.54
After you've downloaded the iTunes installation pack again, launch iTunes, and connect your iPhone.
Do you still get that same error message, or not?
-Kylene

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

RFC error with SAPOSS (test connection)

Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client      :001
User        :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
                          Connection test SAPOSS
Connection type:    R/3 connection
Connection error        Error opening an RFC connection.
ERROR                  partner not reached (host 209.94.207.139, service sapdp99)
LOCATION              SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL                   NiPConnect
CALL                      connect
COMPONENT         NI (network interface)
COUNTER               9
ERROR TEXT           Network is unreachable
ERROR NUMBER    101
MODULE                 nixxi.cpp
LINE                        8628
RETURN CODE       -10
SUBRC                   0
RELEASE               640
TIME                      Wed Jul 30 10:06:05 2008
VERSION               37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
Pratyusha

Hi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR                   rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION                SAProuter 37.11 on rgcwebsrv
COMPONENT            NI (network interface)
COUNTER                 5580
MODULE
LINE
RETURN CODE          -94
SUBRC                       0
RELEASE                   640
TIME                           Wed Jul 30 10:41:28 2008
VERSION                     37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha

HT1665 I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

See this support article: http://support.apple.com/kb/TS3221

IPhone 4s (ios6) don't sync with itunes when connected to PC

I upgraded my ios version to ios6 (using Wi Fi) and itunes to the latest version.
iTunes now donot detect my phone when connected to my PC (WIndows7 64 bit) neither charge my iphone using USB cable. The same USB cable when connected to the power socket charges my phone.
Please assist me if anyone have faced the same problem before

Anyone? haha.

Macmini ( 2 GB RAM) freezes with Leopard when connecting external monitor

Hello,
I am having problems with Leopard when connecting an external monitor.
When the macbook is connected to an external monitor, the system freezes and after some minutes, it system reboots. Otherwise only switch off works.
With Tiger there was no problem. Neither with less than 2 GB (1GB or 1,25GB).
My macbook has 2GB RAM an the external monitor is a Samsung Syncmaster 24" (HW diagnostig tests have been successful: RAM and other components).
BR,Jes

Try to resetting the PRAM (Parameter Random Access Memory). Mac OS X: What's stored in PRAM?
I'm using a SyncMaster 940BW and the DVI cable and have no problems like this.

Error occured randomly when connecting user's INBOX with IMAP

Hi..
We are using our own developed web mail program using IMAP protocol.
Not very often but sometimes users faced error they couldn't connect their INBOX.
So I reconstructed their mailboxes and I could see error message.
reconstruct -r user/jcheol.kimuser/jcheol.kim/INBOX
ERROR: Trouble parsing cache record 190 string 1: String goes beyond EOF
Reconstructing...
user/jcheol.kim/Drafts
user/jcheol.kim/MyFolder
user/jcheol.kim/MyFolder/&rPW7OA-
user/jcheol.kim/MyFolder/43&rjAhkA-H&0wA-
user/jcheol.kim/MyFolder/43&rjAhkA-stc
user/jcheol.kim/MyFolder/SDI IS&0wA-
user/jcheol.kim/Sent
user/jcheol.kim/Spam
user/jcheol.kim/Trash
After run reconstruct user can see their mail.
Is there Anyone know what that errors means ?
Any ideas on how to fix it ?
mail sever version is..
> ./imsimta version
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
SunOS ep_ms11 5.8 Generic_117350-25 sun4u sparc SUNW,Sun-Fire
Thanks

The error indicates that the store.idx file does not reflect the true status of the mailbox. Store.idx is a binary file that Messaging Server maintains to improve performance of getting data from the user's inbox.
The problem you describe can be caused by manual manipulation of the user's mailbox (removing files, adding files, etc), disk errors, and, yes, bugs. 5.2p2 is the latest PUBLICALLY available version of 5.2, but Tech Support has much later versions. I suggest contacting tech support and requesting a current hotfix. I cannot give you that, here.
Or, you can upgrade to 6.2....

Printer crashes with 0xB845D7DC when connect to UPC Ubee EVW3226 cable modem/router

Printer: HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
SN: [Personal Information Removed]
PN: CM750A
FW: CKP5CN1516AR
When try to connect to the wireless router (DHCP enabled), the printer LCD display starts to flash and for a second it displays B845D7DC.
After this, the printer requests a reset and it will restart with wireless disabled.
I have a cable modem with wireless router from my TV cable provider UPC called UPC Ubee EVW3226.
I tried to connect the printer to the router using WPS button and providing the password. In both cases I have the same behavior.
I have a dozen of other wireless devices at home that connect without any problem to the router. But not the printer.
Please let me know what other information will be good for you to solve the issue. Or please provide a workaround.

Welcome back to the HP Community , I read through your post about the error codes you are noticing on your Officejet 8600 Plus, amongst the unit requesting a reset when connecting the router. I wanted to share my own suggestions with you that may help. If you find the issue unresolved, contact HP directly afterwards to see about your next printer options with them. 1. Click this link and try a firmware update: HP Officejet Pro 8600 N911g_n FirmwareFM available at the moment is CLP1CN1516AR 2. Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power. Turn the printer on.
With the printer turned on, disconnect the power cord from the rear of the unit.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the unit.
If the printer does not turn on by itself, press the Power button to turn it on. If you need to reach HP, here is their contact information:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

Error: No Phone System Connection

Greetings,
I am integrating RCC with Lync 2013 and I am getting this
Notification: No Phone System Connection. I have notices that when I capture packets transferred between Front End Server and CUPS server, there are no packets being sent to CUPS server.
I have completed below steps:
1) I have enabled integration with my phone integration option in Lync client
2) Added Static route to the CUPS server on port 5060.
3) Added CUPS as a trusted application in the application pool.
4) Published the new topology and restarted the Front End Services.
Remote Call Control URI is set to: sip:[email protected]
Phone URI is set to XXXX;phone-context=dialstring
I would really appreciate if you can guide me.
Thank you
Chirag
Chirag Shah

Hi,
Did the Lync account contains an apostrophe? If so, it may influence for the users with an apostrophe (') in their Lync sign-in ID. In order to resolve the issue, remove the apostrophe from the Lync sign-in ID. Also you can change to use another Lync account
to have a test.
You can refer to the part of “Unable to get Softphone control” in the link below:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html#controlerror
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

"An unidentified error has ocurred" when connecting to mySQL in Dreamweaver MX

Hi All,
I've been trying & failing to figure this out for 2 days. I hope someone can help! I installed xampp on my local machine, got the Apache server, phpMyAdmin, and SQL up and running. My next step is to connect to my MySQL database in Dreamweaver MX. This where I'm running into trouble.
I've given super access rights to several db users in my MySQL database just to be sure that it wasn't a matter of not-enough-permissions. Here is a screenshot of the privileges: http://www.skyebrannon.com/db_privs.jpg
I am sure my connection information is correct, as I've used it to create a php page that lists my database tables.Those are working just fine Here is my info:
        $dbhost = "localhost";
        $dbuser = "root";
        $dbpass = "dbpassword";
        $dbname = "camin0_music";
When I put the same information in my MySQL Connection, I get "An unidentified error has occured".
Here is a screenshot of the error and my (working) connection info:
http://www.skyebrannon.com/db_error.jpg
My apologies if this has been asked & solved. If I missed a thread that answes this, could you please let me know?
Thanks so much!
Skye

Hi All,
I've been trying & failing to figure this out for 2 days. I hope someone can help! I installed xampp on my local machine, got the Apache server, phpMyAdmin, and SQL up and running. My next step is to connect to my MySQL database in Dreamweaver MX. This where I'm running into trouble.
I've given super access rights to several db users in my MySQL database just to be sure that it wasn't a matter of not-enough-permissions. Here is a screenshot of the privileges: http://www.skyebrannon.com/db_privs.jpg
I am sure my connection information is correct, as I've used it to create a php page that lists my database tables.Those are working just fine Here is my info:
        $dbhost = "localhost";
        $dbuser = "root";
        $dbpass = "dbpassword";
        $dbname = "camin0_music";
When I put the same information in my MySQL Connection, I get "An unidentified error has occured".
Here is a screenshot of the error and my (working) connection info:
http://www.skyebrannon.com/db_error.jpg
My apologies if this has been asked & solved. If I missed a thread that answes this, could you please let me know?
Thanks so much!
Skye

Error with Layouts when applying package

Hello
I created a package with the "Deploy UI without pictures" unit, then sent it to the CRM so it is automatically distributed and executed on the mobile clients.
The replication with ConnTrans runs fine, but when upgrading we have an error with the Layouts/ folders, for all languages.
The error is
Error description : Error opening File
Error occurred in module ClientUpgrade.Shared.CCompressor
Return value of command: 6
I applied the OSS Note 950549 but nothing changes
Any idea ?
Thanks and Regards,
François

Hi
this problem occurs when one of the components used by the Client
upgrade tool is missing.
Do you use the same machine for upgrading and deploying. Please check
whether the file sapcar.exe is present in the same folder as
ClientUpgradeDeployer.exe. You don't need to specify the path to it.
Please check the location of the ClientUpgradeDeployer.exe.
Please also test whether the problem is related to write protection and
empty spaces in the temp folder. Make sure the temp folder doesn't
contain blank spaces.
Please also test whether the folder sap\mobile\bin is read only.
If yes, then please remove the "ReadOnly" attribute
since the SAPCAR.exe creates a files in this directory
Regards,
Gervase

Error message -1073807298 when connecting through TCP

I get the error code -1073807298 when I try to connect to a TCP raw socket VISA resource, the weirdest thing is that I actually can read the result of the queries I make. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
This is the WARNING that I get when I read one byte at a time:
Warning 1073676294 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
This is the ERROR that I get when I set the byte count to 1024:
Error -1073807298 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error.
I enclosed the VI for your review,
Thanx in advance for your help,
Attachments:
LV.vi ‏22 KB

Hi,
While there is no equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections, one strategy is to make the first byte in your TCP string to contain the number of bytes to follow it. That way you can read that byte then know what to set the byte count to.
Regards,
John E.
Applications Engineering
National Instruments

Accidentally selected new phone when connecting existing phone to iTunes. Is there a way to reverse this? this an iPhone 4.

Accidentally selected new phine when connecting a phone that was already associated to the same iTunes account? Is there a way to reverse this to see the backed up data formthis phone according to its old association to that account.

On the Summary page of your phone in iTunes, select "Restore Backup."

Error message appears when connected to computer

When I attempt to connect my original iphone to my pc in order to update...an error appears."Cannot connect iphone due to unknown error 0xE8000012" A week ago I was able to plug it in, what's going on? I have the latest itunes 8.2

I had that happen to me too once, don't know if it was the same error code, but powering off the Iphone (by holding down the top botton till it popped up the red shutdown slide) and powering it back on fixed the problem.

6230i wierd error with phone when connecting to bl...

Similar Messages

Maybe you are looking for