6233 low volume alarm tone

I'm facing a problem with low volume of the alarm tone. In fact it is not reliable enough for waking me up !
I know the alarm tone is ascending by default, but when it reach its highest level it is a bit lower than a ringing tone for incoming calls for example. That's mean it is very tender and hardly could be heard on a noisy streat and what about waking me up in the morning.
Please let me know if it is possible to turn off the ascending mode of the alarm tone. There is such an option for the ringing tone of incoming calls, but not for the alarm alert. However, the ascending mode is not the problem, but the low volume of the alarm tone at all.
Share your opinions and experience. Thanks in advance to all 6233 users.

it is not possible to change the ascending feature on the alarm tone. what you can do is select another tone apart from the default tones. i use one of the defaults, can't recall which one it is, but its the loudest and it wakes me up on a morning. or you can try using radio or a full length song.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Similar Messages

Download the nokia 6233 "standard" alarm tone?

ive just recently upgraded to a nokia 6210 navigator and i dont really like the alarm tones on it. i kind of got used to my nokia 6233s annoying "standard" alarm tone and got used to associating it with waking up!!
is there anywhere i can find this tone, or anyway to get it off my phone to transfer onto my new nokia 6210. i cant find it anywhere saved on the phone, its only an option in the alarm menu.
thanks!

download just unzip it or winrar to make them work
or try this link
http://rapidshare.com/files/34597475/6233.zip.html
Message Edited by jimmyireland on 17-Aug-2008 02:06 PM
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 3110 Classic Alarm tone too low

I brought a Nokia 3110 Classic yesterday and found the alarm tone too low. Tried chaging the Tones, but all of them are too low. Not enough to wake up. can anyone suggest how to overcome this problem.
Thanks

get a loud tone there is no volume level for this if your havin trouble i will post a good loud one most nokias now have incremental volume ie get louder the longer they ring but i have good loud one
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

X3 very low message and alarm tone

plz help me my nokia X3 message tones and alarm tones r very soft and i cant hear them even if its in max volum.....plz help

this has been brought up here many times if you search site you will see this
however the only solution is that you use a louder mp3 tone for these alarms
the preset tones are not that loud
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

No ascending calendar alarm tone in N82

I'm having some problems with the sound level of the calendar alarm in my new Nokia N82. I have the ringing type set to ascending in the phone profile and both the alarm clock and ringing volume start at a low level and increases which is what I want. The problem is the calendar alarm that starts playing the alarm tone at the highest level which is very annoying to say the least. A strange thing is if I go to calendar settings to change the alarm tone the phone previews the tone in ascending mode, starting at a low level and increases. My previous phone was a 6630 and it didn't have this problem.
What can I do to fix this annoying problem or do I have to wait for a new firmware release to fix this problem. Does anybody else have this problem with your N82s?
Best regards, Magnus

It's been like this in all firmware versions so far. I think it's like that on other similar models too.
There is no way to change it on the phone. What you can do if you know how to edit audio on a PC is find a sound that you like and edit it so the volume fades in.
Other than that you'll just have to hope that they change it.

6303i - Changing To-do Alarm Tone

I'm a happy new user of a 6303i Classic (updated to v09.83). I find the alarm tone I get for a new To-do list item too quiet, but I can't see a way to choose a different alarm tone as default for a To-do item. I'd rather not increase the handset Ringing Volume (or if this affects the volume of the To-do item tone), so I was hoping the best option would be to change the tone used for a new To-do item to a louder one. For Alarm type in a new To-do list item I'm given the choice of No Alarm, Silent, or With Tone. But I find no way of selecting which tone to use with the 'With Tone' option. Can I change this? Any help would be much appreciated. Many thanks.
Solved!
Go to Solution.

this cant be changed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia X6 - Low battery alarm / indicator ...

Hi guys,
My phone was very silent today and when I tried to use it, I found that the battery has gone ... but I do not remember an alarm or any indication that battery was low last night.
How do I turn on the low battery alarm ?
I have disabled the following in an attempt to get rid of that annoying nokia start up tone. Does this disable the low battery alarm as well ?
Settings->personal->profile->general->personalise->warning tones = OFF
Thanks.
Solved!
Go to Solution.

hi everybody,
Some times I feel that people buy a new phone, and then just after try to personalise it wothout going through the USER GUIDE.
Why I get this feeling is, if u all go through the questions asked by the beginners looks to me are very basic.
please do not think that every phone model has the same type of settings (may be in the same brand upto some extent)
hence my appeal is first go through the manual one by one keeping u r phone on and check the menu one by one , this will take maximum Two hours if u do it contineously.
So please do this run for the at least once, so that u will realise the value of it and see the difference.
then u can minimise critisising the manufacturer unless u have a very specific problem in u r phone.
Chandana99

Guitar audio drop-out at lower volumes

I have tried out mainstage on a friends macbook pro, to check if it will be worth an investment into Logic over Garageband, mainly as an effects emulator for my guitar so I don't need to worry about amps in my small flat.   I connected through an Edirol UA-5 USB audio interface and while there were some issues with this interface anyway due to the fact I could only use input-1 rather than the Hi-Z Input-2 that I should use, I wanted to check some audio problems I had and see how to fix them.
Basically, at full volume on my guitar it seems to work fine, but as soon as I turn the guitar volume knob down there is literally no sustain anymore, I can hear a brief note and then it just cuts out, no gradual loss just stops.   If I only plug the interface in without mainstage then the monitor channel gives me the full volume control I expect and I tried my guitar on a proper external amp and it seemes to be fine so i've eliminated my guitar as the problem.
Anyone experienced this or have any suggestions to try to get it to work.
Also, if I use garage band I don't hear the output fromt he amp/effects simulators, only raw guitar and I only hear the final version if I record it and then play it back. Is there a way to get Garage band to act as a amp/fx simulator in a live mode like mainstage does or is the fact mainstage is playing back through the interface what might be causing the problems in some feedback loop??   Beginning to think an iRig would have been a better option......

CCTM wrote:
Djbungo wrote:
Basically, at full volume on my guitar it seems to work fine, but as soon as I turn the guitar volume knob down there is literally no sustain anymore, I can hear a brief note and then it just cuts out, no gradual loss just stops.
Hi
Sounds like you may have a Noise Gate in there somewhere?
CCT
yeah I thought of that but couldn't see anything, and think my knowledge of what a noise gate would do is slightly rusty since I assumed that at louder volumes it would clip and at lower volumes it would be fine....i'll have a play next time I am over my friends and see if I can spot anything.
Thanks for the quick reply.
MKS

Seemingly low volume for X-Fi Xtrememu

Today, the second time I booted up my computer I began to receive an interesting problem. My audio worked to some extent, but the volume was exceedingly low. I had to put my ear right next to the speakers to hear anything. I pulled out my headphones and plugged them in -- Same result, low volume. When I disabled the X-Fi and enabled my onboard audio, the volume was crystal clear and worked perfectly fine. I didn't change any software, drivers, hardware, or anything of that sort within the two reboots either.
I checked the obvious and made sure my volume was high in the X-Fi configuration panel, the windows panel, and my media players. Everything was maxed out. When I turned up my volume to the maximum on my speakers I could hear things better, but it was horribly distorted and sounded as if they were being over dri'ven. Normally I never have to increase the volume on the speakers much to hear anything, their usually on about 20-30% and I hear them perfectly fine.
I posted about this before on another site and It was recommended I try installing the latest drivers. So I decided to do an uninstall of the X-Fi drivers for good measure and, after rebooting, I installed the drivers and rebooted once more as it prompted me. The same exact result as before: sound that seems to have very low volume. After this, they recommended I try a different PCI slot as it may be damaged. I tried the other PCI slot and I had the same exact results as before. I did not want to install the card into the slot right next to my video card because it looked like the fan would be right up against the PCB of the X-Fi and that it might impede air flow and cause both cards to overheat.
Does anyone know what might be the problem? I'm using the latest drivers I saw (September 9th I believe) and the X-Fi has worked great for the past week and a half. I really don't want to have to own a $00 paperweight and revert to onboard audio.
Edit: If it helps any, I'm running on the following:
Asus A8N32 SLI Deluxe
AMD Opteron 70
X-Fi Xtrememusic
GeForce 7900 GT
If you need any other info, i'll post it.Message Edited by Sagekilla on 0-22-2006 2:9 PM

Bump.. Does anyone know how to fix this problem? I've made a list of all the fixes I've attempted
- Checked the volume in Creative's console, the Windows volume control in my tray bar, and in the Control Panel under "Audio and Sound devices"
- Made sure default device was the X-Fi
- Made sure the speakers was plugged in the right spot
- Made sure the speakers weren't faulty (I tested with a pair of head phones and on my iPod)
- Made sure I had the latest drivers
- Did the diagnostic, didn't help
- Did a system restore that made things worse
- Switched the PCI slot the sound card was in
- Tried onboard audio and found the audio there worked fine (I don't want onboard audio and a $00 paper weight though)
- Made sure onboard audio was uninstalled and disabled
- Posted on the creative labs forums and got no replies
- Safe Mode doesn't even recognize the Sound card
I'm pretty sure this isn't something stupid like "Is the volume turned up?"

Using song as alarm tone

I have a Nokia 6710 Navigator. I have downloaded an mp3 onto my phone, which I want to use as my alarm tone. I have selected the song as my alarm tone, and at the set time the song begins playing.
My issue is that, when playing as an alarm, only 1 minute of the mp3 plays.
Is it possible to change the settings so that the whole mp3 file plays (approx 3 minutes) when I'm using it as an alarm?
Thank you for your help

So could anybody tell me then what length limitations the phones have?
1 minute for the alarm, for the regular ringtone "unlimited" (e.g. a song with 5:00 length)?
Is there any website with specifications/requirements for customisations/custom files (wallpaper/tehem/tone/etc.)?
regards
Pete

No low battery alarm when on the call. (Nokia 700)

There must be some bug with the low battery alarm on Nokia 700. When the phone is on a long call, it just shuts down without any alarm at all. I had this issue several times. My battery shows that it’s full for about 30% or something. Then I call and have a long conversation. And the phone just dies without any alarm at all. When I try to start it again it seems that battery is drained and I have to charge it to turn it on again.
When the phone is in standby and battery is starting to running low, it beeps and shows a message. However, when I am on the call, nothings is happening, it doesn’t give me a message that battery is low and that it’s time to connect to the charger.
It’s a most important functionality I expect from the mobile phone, to be able to make a call reliably.
It’s a Nokia 700
Software version: 111.030.0609
Software version date: 2011-11-26
Custom version: 111.030.0609.c00.01
Language set: 111.030.0609.05.01
Product code: 059G2D6
Type: RM-670

It seems to me that after I've got version 111.030.0609 installed by Nokia service technician, my Nokia 700 never goes into power saving mode (and it doesn't matter what do I have in Setup / power saving / power saving query). It doesn't turn saving on and it doesn't ask me about it. Something must be wrong with 111.030.0609

Low volume warning

My son is currently having a problem connecting to itunes. When he brings up itunes he gets a low volume warning popup stating that itunes volume has been turned down low, howereve he cannot click past this warning box nor x out of it. He has not been able to use his ipod for the past two months and we aregetting very frustrated. i have tried to uninstall itunes and quick player and then reinstall but nothing has helped. Other than this new issue he has been using it successfully for two years. Please someone help!!!!!!

Why can't he dismiss the dialog box? Can he see the button on screen? Is it a screen resolution issue?

My low volume button doesn't work on my Iphone 4, how can I fix it?

Okay so I dropped my iphone in the parking lot garages of my apartment complex and the ground was cement, when i picked it up the screen wasn't cracked or anything so i thought it was okay but once i started listening to music and I wanted to lower the volume and so I pushed the low volume button but nothing happen....The high volume button works fine but now the low volume button so if you want to lower the volume on my phone now you have to do it manually....Also after the drop i turned off silent mode on the side and the clicking sound wasn't there and I checked in the settings, it said it was on and the volume was on but I heard no clicking sound!!! How can I solve these two problems? Can I go to an Apple Store and let them fix my iphone if I don't have AppleCare?

Hi there Jaz94,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

No sound vs low volume

I recently experienced the loss of all sound on my phone. It began after I unplugged the ear phones. I could not hear it ring and I could not hear anyone on the line although they could hear me. It was basically dead for about 4 hours or until I plugged the ear phones back in causing something to reset or whatever. It works fine now and Apple asked that I call when it occurs again so that we can try and trouble shoot and narrow the problem. I may have a defective phone.
I do not think this has any correlation with the "low volume" problem that everyone is talking about. I will agree with another writer that the volume is low until you activate the speaker but I have been using the speaker/hands free since the first day so perhaps that is why I have never experienced low volume. I think if the speaker is activated everyone will experience normal sound volume.
Dell Windows Vista
Dell Windows Vista

Faddy wrote:
I installed the Audigy 2 ZS last night. Updated everything, all of the drivers. I plug in my speakers, and nothing at low volume. I turn on music, and theres nothing. If I turn the volume all the way up, theres distortion, white noise, and a bunch of static, but I can hear the music very faintly. I've disabled the onboard audio, and followed the FAQ, but nothing. Any ideas?
Output volume is set with "Wave" and "Master" controls. Max the Wave and control with Master.
In many cases if PSU is weak --> you get issues of this type. Try to remove (temporarily) devices like CD/DVD, floppy, etc. (just remove power/data cables) to see if PSU is the culprit for your issue.
Also, have you checked/tried
- audio HW acceleration and SR conversion quality --> set both max
- audio codecs --> reinstallation can be helpful
- muted all other sources but the one(s) you're using (i.e. all other sources can be muted if only playing audio files)
- digital output only set properly (speaker settings/THX console)
- speakers connected as should (2/2. --> green jack, etc.) and plugs properly pushed in
- speakers set correct (2/2., 4/4., 5., 6/6., 7.)
- used different output device drivers on audio players (DS/MME/WDM/...)
- ASIO capable player --> shows if you have sound driver issue (creative/windows)
- reinstalled directX, WMP (updates audio codecs)
- etc.
jutapaMessage Edited by jutapa on 03-09-200609:34 AM

6233 low volume alarm tone

Similar Messages

Maybe you are looking for