6233 model - Phone sound (during Calls) very low

Hi,
the sound I hear during calls is very low despite I have set tones and key pad sounds to the maximum.
Whereas the same in loud speaker mode or hands free mode is very good.
Plz help me
Model 6233

Check if you could put in to factory setting, if it would help.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • No sound during calls in iphone4

    hi friends ,  recently i hv updated my iphone 4 to ios 7 , it was working perfectly , but after 2 days itz fell down ... after that no sound during calls(both mic n speaker) , but itz working on skype n viber .idk watz d prob , can any one help me out

     Hi, I do have the same problem. Just bought the phone. Updated right after bying to Androit 4.1.2 and Build nr 9.1.A.1.140.Calls with headset or loudspeaker works. But if I switch it too normal calling I´couldn´t hear a thing. I turned the phone on and off: no change. I even did a reset: no change.I really didn´t wanted 2 buy an iphone because I thought that the androit phones got better over the years. Somehow I really disappointed right after 3 days having the new phone. Is there any help for this problem, did we flipped the wrong switch somewere in an hidden submenu or is the phone broken? Thx for the help

  • After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

    After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

    I am having the same issue. I am updating to 6.1.3 to see if that helps. It is really annoying. It seems to vibrate as well as hiss on my ear piece speaker while on a call. I keep looking at the phone thinking maybe another call is coming in.

  • TS5183 Reception of volume in comming call very low volume cannot hear well call pad gets green

    Receiving calls very low reception cannot hear the person and then call screen gets green ,SMS typing getting stuck.

    sunshinesunshine wrote:
    So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
    Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

  • MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

    This topic has been moved to AMD64 ATI/SiS/VIA based board.
    https://forum-en.msi.com/index.php?topic=115320.0

    Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
    OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
    Check Volume from mixer settings, cable connections, Volume on your speakers.
    I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

  • HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

    hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

    Hello Kishore1022,
    It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
    iPad User Guide
    http://help.apple.com/ipad/7/#/iPad99f37037
    Go to Settings > Music to set options for Music, including:
    Sound Check (to normalize the volume level of your audio content)
    You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Or
    iTunes 11 for Mac: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12283
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Low quality sound during call

    Hello,
    Since the iOS 7 update that I've been noticed that the sound quality during calls is very poor to others, almost like I speaking away from the iphone without speaker, regardeless I keep earing everything loud and clear!
    I've already tested with other iphone 4/4S/5 iOS 7 users, and also running different iOS versions, as well as other phone brands, and the problem maintains!
    Upgraded to 7.0.3 today, despite the improvement/enhancements/bug corrections list dont mention any issue addressed to this problem, hoping to solve the problem, but nothing change, its pretty much the same as before!
    All settings are at the max, and also perform some tasks as suggested on apple support forums like tweaking the accessability options, by turning noise reduction off, but still the same!!
    My S/N is C34JPLSTDTWF.
    Hope I had described accuarately, in order to you perform the correct troubleshoot for this, this if you ain't already done it!
    Best regards,
    Pedro Sousa

    This happened to me as well and I confirmed others are experiencing same speaker/mic/bluetooth issues with both 4S and iPad 2, 3.  Applied the updated patch yesterday, things are worse because now I have NO sound via the speaker.  What's the FIX?!

  • No sounds during call

    hello i have iphone 4s wth 8.1.1 and its working fine but problem is neither i hear someone nor someone hear me during calls wat can i do plzzzz help

    The resource below will provide some steps to address the issue you are having hearing conversations on the iPhone 4s:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT203792
    Test the microphone
    To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
    Fix common issues
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    http://support.apple.com/en-us/HT203800
    While you're on a call, make sure that you can see the volume indicator on the screen when you press the volume buttons:
    Check the connections
    If your iPhone is connected to a headset, you won't be able to hear through the iPhone receiver or using speakerphone. Follow these steps, testing after each.
    Make sure that you don't have anything plugged in to the headphone jack or the dock connector.
    Go to Settings > Bluetooth and turn off Bluetooth.
    Clear the receiver
    The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
    Follow these steps, testing after each:
    Make sure nothing is blocking the receiver, such as a case or film.
    If you have a new iPhone, remove the plastic film on the front and back of the device.
    Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
    While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
    Restart and update
    Restart your iPhone and test again.
    If there's still no sound or poor sound quality, update to the latest version of iOS.
    I hope this information helps ....
    - Judy

  • My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

    the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

    i use professional studio monitors to monitor the audio
    the issue , is if i turn up the audio it will clip on premieres main output.  so i cant turn it up any more.
    the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
    this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects  maybe there is a hidden master output that im unaware of

  • Atfer update os 5.1.1 my i phone 4s rington volume very low

    atfer update os 5.1.1 my i phone 4s rington volume very low

    Go to settings/sounds and check that the ringer slider is far to the right

  • Want to connect an older Amplifier to AEX. Input data is 200mV for the amp. When I connect sound level is very low. What is output on AEX?

    Want to connect an older amplifier to AEX. Input (AUX)data is 200mV. The soundlevel is very low. What is output from AEX? Phono input is 2,5mV and gives too high soundlevel as well as a strange sound(Isuppose some preamp is there)
    Anyone to give some good ideas?

    The analog output of the AirPort Express is approximately the same as a CD player. It is definitely compatible with a millivolt input. Don't use a phono input.
    Make sure the master volume in iTunes is at its maximum setting. Remote speakers can have their own volume setting in iTunes, so check that also:
    Try another audio cable.

  • IPhone 5S GSM no sound during calls

    Dear all,
    I have been having this issue for quite a while now and nothing seems to be working:
    95% of the times when I try to answer or place a call, it will connect, but I would not hear anything and I also will not be heard. The phone app itself is also very sluggish (it freezes for 5-7 seconds). It is the same if I try placing a call using headphones with a built-in microphone. Turning the speaker on won't help either.
    When the call does go through with sound, the quality is not great, but still acceptable. Once it does, I am able to talk even for hours, and then it is back to square one.
    Suspecting it might be a carrier/network issue, I requested a sim unlock, which they did. If I put a different sim card in it, I can place or receive a call, but the problem with sound is still there.
    I tried all the steps I could think of, including a soft reset, a hard reset with and without backup from before the problem occurred, a complete wipe out from the DFU mode (with new firmware), resetting network settings multiple times, changing the sim card. I tried also turning the location services off, turning the noise reduction off etc. It happened weeks after I updated to 8.1.3 and is still there after I upgraded to 8.2, so probably it is not upgrade-related.
    Facetime, Facetime Audio, Skype, Viber, regular text messages, iMessages and every other app that uses sounds/mic/headset/speakers work just fine both with and without headphones, both on Wi-Fi and on cellular data.
    The phone has never been jailbroken, never had water damage, has never gotten any major falls or other damage. There are no Apple Stores where I live, unfortunately.
    Any suggestions would be greatly appreciated
    Thanks in advance!
    Cheers to all,
    chasingwind

    Hi, chasingwind.  
    Thank you for visiting Apple Support Communities. 
    I understand that you are unable to hear via the receiver during a call.  I see you have tried some troubleshooting steps with the issue persisting.  There are just a couple more steps that I would recommend going through in the article below.  
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/en-us/HT203800
    If the issue persists, see the section labeled Get more help.
    -Jason H.  

  • Loss of sound during calls following updating iphone 4 with IOS5

    I've recently updated my Iphone 4 with the IOS5 update.  Since then I've had terrible problems with loss of sound on phonecalls.  I can hear others but they cant hear me  - loss of sound is patchy during a call.  I've cleaned mic with a soft brush and rebooted but problem still exists.  Any ideas before I restore factory settings/ and or take back to the shop?

    I have a Iphone 4 and when i try to make calls, i cannot hear anything unless i put it on speaker, and sometimes if i try to turn the call volume up during a call without the speaker it almost sounds like the speaker is blown out. I just bought this phone online 2 days ago so i don't understand how that could happen.
    Is anyone having this problem? I'm am totally lost with what to do other than return the phone in and see if i can get another one?
    Please help!!!!!

  • OTA 5.1.1 gone wrong.  (no sound during calls anymore)

    A few days ago my wife applied IOS 5.1.1 (OTA) the update completed and the phone rebooted - after this all seemed fine.
    later that day she realized that her phone didn't get any audio anymore during phone calls.
    (people on the other side cannot hear anything and on her phone you cannot hear anything either.)
    It's great that the iPhone can do everything - but normal phone calls are still essential right
    All other audio operations are fine btw, voice recording/ speakers, music, face time  all work as normal.
    Although they do have different audio processors but still what is the chance of that breaking during/after the IOS upgrade.
    I already tried the following:
    - reset/restore to previous backup.  didn't work
    - downgraded the phone back to IOS 5.1 / setup as a new phone didn't work.
    - downloaded full IOS 5.1.1 and upgraded again, no fix.
    - reset to factory settings and setup as a new phone.
    The phone is now 1.5 years old and out of warranty.  (as usual)
    A call to apple support - We cannot do anything as it is out of warranty.  try restoring it ..  great!
    Now I accept it is out of warranty for real hardware faults, but it was working perfectly until Apple prompted/pushed me to update.
    (after which it rebooted and stopped working) 
    To me this seems like a software/firmware/hardware bug that is being exposed due to the update. 
    The phone has never been jail broken either.
    The fact that I see threads on the forum that are 170 pages long about similar audio issues doesn't fill me with confidence that apple will do the right thing and own up to the problem or fix/replace the phone.
    https://discussions.apple.com/thread/3404857?start=2535&tstart=0
    But you never know, so here is my post.

    i also updated mine and im having the same problems NO AUDIO works at all. no lock key sound. no key clicks. NOTHING. i have a 3gs. and i updated yesterday :/ ugh i tryed to call apple and they said i needed to come into the store. because they couldnt trouble shoot it because i didnt have applecare something...

  • No sound during calls

    Need help!!I bought my Xperia V in May, and everything was working well. Then about a month ago I started finding a bug.I cannot hear anything when I try make a call (via phone or Skype) through the speaker. If I plug in headphones/ headset  then I can hear everything fine. If I switch to loudspeaker during the call, I still  cannot hear anything. My loudspeaker works fine when playing mp3s or using alarms/ timers etc. I am thinking this is a software bug. It was working till a month ago. I do not recieve many calls and usually use the headset when I skype, so I thought it just didnt detect when i removed the headphone.If I use smart connect, it registers when i remove the headset but still has no sound. I tried restoring via PC companion but still nothing. Any suggestions?I have build # 9.1.A.1.140

     Hi, I do have the same problem. Just bought the phone. Updated right after bying to Androit 4.1.2 and Build nr 9.1.A.1.140.Calls with headset or loudspeaker works. But if I switch it too normal calling I´couldn´t hear a thing. I turned the phone on and off: no change. I even did a reset: no change.I really didn´t wanted 2 buy an iphone because I thought that the androit phones got better over the years. Somehow I really disappointed right after 3 days having the new phone. Is there any help for this problem, did we flipped the wrong switch somewere in an hidden submenu or is the phone broken? Thx for the help

Maybe you are looking for

  • Watch iphone videos on a Macbook Pro

    I can't figure ot how to do this.  It's probably a simply procedure but I am brain dead. Help appreciated.  Anyone?  Anyone?

  • EPM11.1.2 installation issue on windows 7

    Hi, I am trying to install Hyperion EPM 11.1.2 version for HFM module on windows 7. I have enabled IIS 7.5 in windows 7. I tested the IIS home page and also created the virtual directory, just to test IIS is working. During EPM installtion, after the

  • Trend Micro Titanium won't open

    I've been having trouble with the new antivirus software I put on my mac. Sometimes I can scan the files on my computer and check for clickable links containing viruses, but not always. I haven't been able to open it. I kept getting this message: iTI

  • Issue bringing up ADF form in IE8

    When I try to bring up an ADF form using IE8, I'm getting thousands of messages like the one shown below in the access.log file and the form never appears. When I use Firefox, the form comes up correctly and none of these messages appear. 10.83.30.11

  • I want to view my iPhoto photos on tv

    I would like to skip watching my photos on a screen via a digital projector and just watch them on my tv. Is this possible? I have a late 2010 macbook pro with Mountain Lion.