6233, RM-145, code 0541162 - no firmware after ver...

Hi, my 6233 is ver. 04.52 and code 0541162. The Software update availibility web page says "Sorry, there is no software available for your product code". I can´t believe it, because in my other 6233 I already updated to ver. 05.10.
Thanks for any information.

22-Jan-2007
08:18 AM
blaikie wrote:
Hi,
is it possible to get an update for 6233, RM-145, code 0541162?
Thank you!
According to this: http://www.nokia.co.uk/A4305060 - no.
But try with NSU anyway, you never know.
5800 v20.0.012 -- 6500s v9.40 -- 6233 v5.43 -- 5140 v3.13

Similar Messages

  • Firmware for 6233 RM-145 CODE:0539282

    Hello
    Is there any new firmware for 6233 RM-145 CODE:0539282 ? I have V3.70 and V3.70 language pack. There is no new update on Nokia Software Updater. Please help.
    Filip

    22-Jan-2007
    08:18 AM
    blaikie wrote:
    Hi,
    is it possible to get an update for 6233, RM-145, code 0541162?
    Thank you!
    According to this: http://www.nokia.co.uk/A4305060 - no.
    But try with NSU anyway, you never know.
    5800 v20.0.012 -- 6500s v9.40 -- 6233 v5.43 -- 5140 v3.13

  • Login issue after Firmware Upgrade Ver.4.21.5 for WRT54g v2

    I just updated the firmware to Ver.4.21.5.  After I log in to the router, each time I change Tabs or I save a change I am prompted for the Admin password.  This is annoying, but not a limiting factor for changing settings.  Is there a fix for this?
    Thanks

    davekstl wrote:
    I just updated the firmware to Ver.4.21.5.  After I log in to the router, each time I change Tabs or I save a change I am prompted for the Admin password.  This is annoying, but not a limiting factor for changing settings.  Is there a fix for this?
    Thanks
    u can reset the router and reconfigure it . it should not keep on prompting anymore .
    I believe that I can make it

  • Restrict changing the tax code in purchase order after goods receipt.

    Hi,
    Po is created with tax code x1.
    Gr is done for partial quantity.
    IR is still pending.
    User has changed the tax code to x2.
    This case we want to restrict the tax code change in PO after goods receipt.
    Please advice.
    Regards
    Ravi Kumar

    Hi Sumit,
    Po created with wrong tax code x1.
    Stores person has done the receipt and consumed the stock.
    Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
    In IR we will use correct tax code and post the accounting entry.
    Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
    Point is user's are asking that how system is allowing to change the tax code after receipt.
    Point to be attended is restrict the change of tax code by any means after Gr has happened.
    what are the possibilities to restrict the change of tax code.
    Regards
    Ravi Kumar

  • Nokia N95 product code 0547686 v20 firmware now av...

    nokia N95 product code 0547686 v20 firmware now available!!
    just updated mine.!

    Connect to PC suite and use the updater.
    It will update the firmware to the latest version.
    For pros and cons of V20, please use search
    The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

  • How to make a T-code to be displayed after starting SAP

    Hi all, plz let me know how to make our own t-code to be displayed after starting SAP screen.

    Hi,
    It is shown at the bottom right corner of your screen.
    Regards,
    Atish

  • Locking down ipphones to a certain firmware after an upgrade

    Hey guys,
    Can someone let me know or link me to a doc that explains how to stop my phones from upgrading their firmware after I upgrade my pub and subs?
    Thanks,
    BR

    Hi Brent,
    There are some excellent tips from Bill Bell in this thread
    https://supportforums.cisco.com/thread/2015221
    Cheers!
    Rob
    PS: you will see in the attached doc some good info regarding copying the current
    Device defaults b4 upgrading so they can be re-inserted after the fact.

  • [svn:osmf:] 12677: Code cleanup and changes after code review.

    Revision: 12677
    Revision: 12677
    Author:   [email protected]
    Date:     2009-12-08 16:11:31 -0800 (Tue, 08 Dec 2009)
    Log Message:
    Code cleanup and changes after code review.
    Modified Paths:
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/CaptioningPluginInfo.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/loader/CaptioningLoader.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/media/CaptioningProxyElement.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/Caption.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/CaptionFormat.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/CaptioningDocument.as
        osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/parsers/DFXPParser.as

    Hi Zpittman,
    What is you said ‘Code Review Tool’?
    I assume that you meant the Code Review feature in TFS. I tried it in Visual Studio 2013 with update 4 and TFS 2013 with Update 4, the whitespace was detected and the code review see it as a difference.
    If you don’t get the same result with me using VS and TFS, please upgrade your VS and TFS to the latest update.
    If the issue still exists, please
    reset your VS settings through Tools->Import and Export settings->Reset all
    settings->…. and repair your VS.
    If code review tool is a third-party tool or a third-party VS/TFS add-in, the official support of this tool can be a better place to resolve your issue.
    If I misunderstood anything, please feel free to come back.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • ZEN Style M300 Firmware Update Ver 1.00.16

    ZEN Style M300 Firmware Update Ver .00.6
    Filesize : 3.72 MB
    Release date : Aug
    This download contains an improved version of the firmware found on your Creative ZEN Style M300 player. It improves the overall stability and Bluetooth user experience. For more details, read the rest of this Web release note.
    What's New:
    Now supports playlists created by Windows Media Player and WinAMP in *.m3u format.
    Improves stability of player when it's paired and streaming music via Bluetooth.
    Allows Bluetooth streaming of Audiobooks.
    Now supports 4-digit pairing code entry for compatible Bluetooth multimedia devices or Bluetooth car stereo decks
    Bluetooth will be turned ON automatically upon restart when it is detected that it was ON prior to shutdown
    Requirements:
    Microsoft Windows 7, Windows Vista, Windows XP Service Pack 2 or later
    USB port
    Creative ZEN Style M300 player
    Note:
    Due to changes in this new firmware, the firmware update utility may not detect previous firmware versions correctly (example: 0.0.000). Please do not be alarmed by this and continue with the firmware installation.
    To install this firmware, do the following:
    . Download the ZENFWUpdater_M300_v.00.6.exe file to your computer's local hard disk.
    2. Close all application windows that are currently running on your computer.
    3. Connect your player to your computer.
    4. Back-up your player's content before proceeding with this firmware update.
    5. Double-click the downloaded file and follow the instructions on the screen.

    The M300 not remembering previous Bluetooth state, on and streaming after power down, was inconvienient. Happy to have found?a firmware update addressing this issue.
    Updater reports my current firmware at 0.00.000 and that it would take it to .00.6.
    Following update,?the updater reports that the "update failed".
    The update does in fact appear to have been successful. System > Information reports the firmware as being .00.6 and powering on the device now reinstates Bluetooth conectivity.

  • Unable to open iphoto after ver 11 upgrade

    Unable to open iphoto after ver 11 upgrade.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Firmware WRT160N ver.2 - 2.0.03 Build 9 with problem

    I updated the firmware (WRT160N ver.2 - 2.0.02 build 15) to (WRT160N ver.2 - 2.0.03 Build 9) which is available on the website of CISCO and simply several problems arose in the product and can not revert to the firmware old. When upgraded did not have the option to backup the current firmware! Would the link for downloading the firmware (WRT160N ver.2 - 2.0.02 build 15) whose only problem was the signal strength! Someone could tell me where can I download? In Brazil the support is terrible... i beleave i can fix the problem with the old firmware... Tank you for atention
    Solved!
    Go to Solution.

    I am afraid that the old firmware is no longer available in their website

  • Short code is not working after new firmware updat...

    I am in USA on T-mobile network. I recently updtated my N80 to the latest firmware 4.07.XXX. Everything worked fined especially VoIP features. However, I used short cut code for example like #MIN# to get my min usage status for my acct. It sends the message but not receive back the message like it used to be. Is anybody have similar issue? None of the short code is working on my phone.
    My favorite N80 applications: Nokia Mobile Search, Smart2go Beta,
    S60 Internet Radio, Mobile Weather.
    N80ie Firmware: V 4.0707.0.7 (March 28, 2007).

    Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • 6233 RM-145: 05.10 Release notes?

    According to some discussion forums Nokia has released a new version of 6233 firmware. Does anyone have release notes/improvements listed for this version?
    Thanks,
    Antti

    Before posting in this thread please bear in mind complete firmware change notes are the property of Nokia service centres and should not be posted on this board.
    Users are free to post changes / improvements they themselves have experienced after a firmware update.
    Thanks
    Moderator
    Nokia Discussions
    Useful Links:
    Nokia Customer Support
    Nokia Service Points

  • Can't update E61 (prod code 0538289) to firmware v...

    Hi,
    I've been trying to update my E61 phone (prod code 0538289) to the latest v3 firmware build for over 3 weeks now.
    The phone came factory flashed with firmware v2 and would like to take advantage of the enhanced SIP capabilities present in v3.
    At first NSU game me a message that no update is available but I can reflash to the same version. After several attempts all I get is that no updates are available.
    Can anyone help?
    Thanks,
    VladS

    Check here: http://europe.nokia.com/A4305060
    For your product code there is no update available. Generally, you can only update phones which are not branded by a provider. I guess you bought a branded phone from a phone company. You have to go to your phone company to have the firmware updated. Branding and support for the branded firmware is generally from the company you got the phone from. Nokia Service Centers in your country may also have the branded firmwares for your provider.

Maybe you are looking for