6233 white screening when trying to send picture m...

help  -  my 6233 has started to crash when selecting a picture to attach for mutimedia message.  Strangely enough I have no problems attaching a video.
I had this problem with pictures when I first got the phone but from reading a post on here realised it was because I had delivery reports on.  switched these off and it worked fine ever since until now
Have reset factory settings but nothing has helped
Any ideas anyone ?
Thanks

Hello fellow 6233 user!
You could try a couple of things:
1) Try attaching/sending a smaller sized picture via MMS.  If it goes thru, then you probably have a very small amount of free phone memory available.  Clear things up by moving contents from the phone memory to the memory card, clean-up your message inbox, etc.  Once you have about 2.5MB free phone memory, try attaching a large sized picture on the MMS and see if it now works.
2) Check your firmware version by typing *#0000# on the standby screen.  Update your phone firmware to the latest known version (v5.60 AFAIK).   To be safe, backup your phone contents first using Nokia PCSuite.

Similar Messages

  • Network authentication failed error message when trying to send picture messages

    I have a family member who is trying to send picture messages from Dubois, WY.  Verizon's map shows that Dubois is in the extended enhanced services area.  I am guessing that this may be one of those instances where the coverage map is not 100% accurate.  Please let me know if you have any other ideas or suggestions as to what the problem might be or how to resolve it.

    Customers have the ability to take pictures / videos anywhere. However, messages can only be sent, received, or uploaded, while in the Verizon Wireless National Enhanced Services Rate and Extended Network Coverage Area.
    Try dialing *228 send and option 2 to update the PRL on the phone.  Updating the PRL or Preferred Roaming List, ensures the phone is getting the best service possible.  
    You can also check the coverage area at the link below:
    http://www.verizonwireless.com/b2c/CoverageLocatorController?market=all

  • Quicktime Pro exports white screen when trying to export to iPod or DV

    I'm recording video on a "Flip" video camcorder which plays back great in Quicktime but when I try to convert the files to either DV so I can edit them in iMovie, or convert them so I can watch them on my iPod, I end up with sound but no picture, just a white screen. I've tried some other QT video from other sources and have the same results so I'm guessing that it is not the camera. I thought it might be my settings to I tried other "Export To" settings but I always end up with a white screen. Any suggestions?
    Thank you!
    George
    Apple Lover since my Apple IIe.

    Add (free) Perian and use (free) MPEG Streamclip to open and export to QT.

  • White Screen when trying to setup Wifi on TX

    Hi - I can't get to the wifi setup screen on my TX.  As soon as I click enable radio, I get a white screen.  I have tried a hard reset, and have also checked the router settings.  I am able to connect wirelessly with other devices.  I am not sure of what else to try - any thoughts?
    Post relates to: Palm Pilot

    Thank you!  It worked for me as well.  If I press down and hold on the back towards the left of the reset button, the white screen goes away.  I was able to setup the connection. 
    The white screen comes back from time to time, and when I press on the back, the screen freezes sometimes too.  It is very "unstable".   Thank you for the tip though!

  • White Screen When Trying to Play Movies / TV Shows Downloaded via AppleTV

    Very frustrating, consistent issue with downloading movies or TV shows via AppleTV. Almost always results in a blank white screen with no sound and no video playing. No matter how many times I stop the video from playing, exit back out to the main menu, and restart the show, the white screen persists. The only thing that seems to fix it is to manually unplug the AppleTV, wait for 10+ sec, and then replug it in. Once AppleTV restarts, then I am able to watch the specific show I had been trying to watch. HOWEVER, the problem resurfaces as soon as I move onto the next movie or TV show.
    Any suggestions on how to end this uber-annoying cycle?? I have all of the latest software downloaded. I have disconnected my iTunes library from AppleTV and then re-paired / re-synced the two (iTunes and AppleTV), and I have even tried resetting my AppleTV to factory settings (although given the volume of content I like to keep on my AppleTV, this leads to incredibly long timeframes to re-sync my AppleTV with my iTunes library). Any thoughts / suggestions / miracles would be hugely appreciated. THANKS!!!

    Hi
    Can't help you I am afraid, but I can tell you that you are not alone. Keep having exactly the same problem. Rented a Movie this evening and had to pull the plug half way through the download to be able to start and watch it.
    I do have the Apple TV connected through a HDMI switch and wondered if it may be copy protection HDCP or something so was going to try it on component when I find my set of cables.
    Will let you know the outcome
    John

  • I get a white screen when trying to reinstall snow leopard

    I am trying to install snow leopard over os x mavericks when i put the disc in it tells me to restart the computer, when it boots up the screen goes white and stays that way the only way I can get out of this is to push and hold the power button and when it reboots hold the eject button on the keyboard to eject the disc or it goes back to white screen, how can I get the reinstall to work ? the system is a iMac 27" mid 2010 3.2 ghz 4gb ram 1 tb hd I bought this used and thought I could get a clean install by updating to os x mavericks when it didn't I got the snow leopard disc to try and put the original software back on

    Revert to a Previous OS X
    Revert to former OS from Mavericks
    Revert to Snow Leopard

  • Random white screen when trying to run applet (Please help)

    We have been plagued by this problem for months. We are running a Java applet (that we wrote) requiring JRE 1.3.0_01, where the html file has been created with html converter. RANDOMLY, when loading the applet, the applet will come up (we spawn a new browser window for it) and we will get a blank white screen, AND netscape will freeze, needing to be terminated. Saying program is not responding when you click the X.
    This is not a multithreaded program.
    I have also tried the new JRE 1.4 with the same problems.
    The strange thing is, we have found some workarounds.... if you tell your plugin to show the java console all the time, it takes care of majority of the crashes, but the applet STILL does the same thing every once in awhile. If someone can tell me what the problem is here I will be eternally grateful!!
    Steve

    I had the same problem at one time during the development of my applets. Without more details from you, there is no way to know the exact cause but I can give you some ideas:
    1) painting problems
    2) null pointer problems
    3) improper setup of the HTML file (this was the culprit for us...double check EVERYTHING)

  • Why gives me NIGHTLY and the latest ADOBE FLASH PLayer sound only with a white screen when trying to watch a video offered by any newspaper, e.g.?

    System Win7 Prof
    Nightly 13.0a1
    Latest Adobe Flash Player
    Whenever I try to open a video browsing any news-paper,
    I receive sound but no picture to the sound;
    the picture is a white screen only.

    Hello ToriTorres,
    You question seems quite general, and this is a CQ5 dedicated forum dealing with CQ specific questions. If your problem is linked with Adobe Flash Player, please try to post in the corresponding forum http://forums.adobe.com/community/flashplayer
    Regards

  • Getting a White Screen when trying to view ITune Purchases

    Hi. I am using HDMI cables and when I go to watch anything I purchased on ITunes I get a solid white screen. I can view anything on YouTube just fine and could just look at movie trailers. Now I am getting a message telling me that the ITunes store is unavailable. But it is working just fine on my computer. I switched cables and am still having the same problem.
    I'm at a loss. Any suggestions?

    Hi,
    While not an explanation of what is happening, I have had success restarting the device when this happens to me.

  • Apps goes to white screen when trying to verify bank card

    hi all, i purcased an app, it asked for verifacation as i hadnt used bank details from iphone before. everytime i click on HERE in red to verify it goes to a white screen.
    also when i try to add facebook app it asks for bank 3 digit pin even though this is a free app.
    many thanx
    tony

    Revert to a Previous OS X
    Revert to former OS from Mavericks
    Revert to Snow Leopard

  • Getting error message "Unable to Share" when trying to send pictures either by text or emai!  Is there something in my security settings that I need to change?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

    I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share".  Just purchased the iPhone 6 plus. Never had this issue with the 5.  Is there something that I need to change in my settings?

  • White screen when trying to play AVI

    Hi,
    I having problems with certain avi files, I open them up and I just get a white screen where the video would be and the sound is fine. It doesn't happen on all avi files and i've updated as many things as I can to try and solve the problem.
    Any help?
    Thanks

    http://perian.org
    Free. Try it.

  • IPhone 5s freezing when trying to send photos

    After I select a picture from camera roll and a contact to send it to, the phone freezes and the message disappears taking me back to the home screen.
    This only happens when trying to send pictures from photo app. When sending by starting from messages, it works just fine.

    Found it... i did not have the window fully expanded and when I did.. there were the options.  I quickly deleted and added my sympatico account and even though I have the BCC ticked, the emails are not showing up in my email inbox.  I have to manually enter my email address in the cc box of the email.  thanks for your time. 

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • Error message when trying to send a picture message (multimedia)

    I am unable to send picture messages and receive "Can't send message right now. There are too many unsent multimedia messages." I tried to upload pictures to print thru the Walgreens app, after becoming frustrated with the application I canceled the upload. I've been having trouble sending messages ever since. I've tried to clear all running applications in the Task Manager, and checked the Multimedia message limit through my Messaging Settings and increased the limit. I can't figure out how to clear the unsent multimedia messages, can anyone help? Thanks!

    Was your 3G data connection active when you were trying to send the pictures?  Have you tried to send picture to yourself?  Dial *228, option 1 to reprogram the phone to the Verizon Wireless network?

Maybe you are looking for

  • Interactive restriction on key figures in BPS layout

    Hi Experts I know you can define planning level/packages/layout header with variables to define selection criteria of characteristics for layout, but is it possible to define selection criteria on key figures? e.g. only show the data in layout with a

  • Win 8.1 Lock Up After 5 min, "Memory Management" or "Cache Error"

    Systems blue screens every few minutes. MS offered a variety of error messages, now is uniformly "Memory Mangement". Chrome shows a Cache Error. Any ideas?

  • Tadir and Transport

    Hi, i am a newbie and have some doubts in the basic transport model.. I have an object name which is around 90 char.In the transport request table e071 this poses no problem , however in the tadir table the obj name field is only 40 char..is there an

  • Quirky behavior on mac os x.4

    mac os x.4 studio creator 2 update 1 starting /stopping server can take up to two minutes at times after creating a virtual form -I right clicked web pages in projects view to create a new page ,after naming the page and clicking finish, the blue whe

  • How can I make the editor photoshop work

    how can I make the editor photoshop work? it can not work at all. please help me . thanks