6267 problem with personal config. settings

Please i need some help. I have an unlocked nokia model 6267 i bought it in a nokia store in Mexico City. I use this phone with 2 operators. Yesterday i erased my configuration settings i had with one of this operators because i had a problem connecting with EDGE so i can configurate them again.
The problem now is that when i try to configure any of the personal configutation settings (web, mms, access point, etc) i only receive the message:
"Cannot add new account. Memory full"
Of course i have to say that my phone memory is not full. I have 22 MB free.
Someone plz can help me with this problem.
Thanks

You've checked with the carrier and they offer it, are you provisioned by them to use it?
Troubleshooting hospot http://support.apple.com/kb/TS2756
understanding hotspot http://support.apple.com/kb/HT4517

Similar Messages

Problems with Qt Config (Xfce 4.6)

Hi
I have problems with QT Config .
I use Desktop Environments XFCE , when you save settings QT Congif (set size fonts etc ) .
Setting do not save
I have set chmod in catalog QT config .
How to fix ?
Last edited by nocentis (2009-03-16 12:00:29)

Welcome to the Apple discussion forums.
As Joeuu stated, assuming you don't have an Intel-based MacBook Pro, that means that your PowerBook is PowerPC-based. There are several steps that should get you back on track.
First, reset your power management unit (PMU). Follow directions at http://docs.info.apple.com/article.html?artnum=14449
Next, repair permissions by running Disk Utility, located in your mac hd, application/utilities folder. Highlight your hard drive and repair permissions.
Did you use the software update function or did you download the update from the Apple support site? In any event, download the combo update 10.4.6 from http://www.apple.com/support/downloads/macosx1046comboforppc.html Updates through the software update function have recently created some unique 'situations', that use of the combo update have solved.
After the update, repair disk permissions again. This is good housekeeping to do before and after any major software installation.
PB G4 1.67ghz 1.5gb; mini G4 1.5ghz 1gb Mac OS X (10.4.6)

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

A Problem with Region Format Settings

Hi!
I have a peculiar problem with Region Format settings on my iPod touch (Settings > General > International > Region Format). It appears that iPod touch can support more region formats than it is stated on that list. Once I registered my iPod, I selected my location, Lithuania, and it automatically set (I think because of this action, and not another, like my PC settings) Region Format to Lithuanian. Although it is nonexistent on the menu list! Good news!
However, the problem is that while I explored my iPod I accidentally checked another region, and there is no "cancel" option. So my region switched to another. And now I am not able to switch it back to Lithuanian again because there is no such selection (reset or restore didn't help).
Has anybody any suggestions how could I return to my preferred region format (Lithuanian)? Thanks!

thats interesting. I think the ipod took those settings from your computer/mac.
anyway, shouldn't there be something near you that has the same region format settings? maybe you can just use something that's exactly the same.
and btw: some of the regions have arrows next to them which brings you to subregions of that region. maybe you should check that out?
otherwise ... well ... I think only a restore would bring back the original settings.

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

TS1559 please help me...my iphone 4s has a problem with wi-fi settings grayed out or dim

please help me...my iphone 4s has a problem with wi-fi settings grayed out or dim

http://support.apple.com/kb/TS1559

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Gmail error message "We've detected a problem with your cookie settings." Tried everything...

THIS IS THE PAGE:
Google
We've detected a problem with your cookie settings.
Enable cookies
Make sure your cookies are enabled. To enable cookies, follow these browser-specific instructions.
Clear cache and cookies
If you have cookies enabled but are still having trouble, clear your browser's cache and cookies.
Adjust your privacy settings
If clearing your cache and cookies doesn't resolve the problem, try adjusting your browser's privacy settings. If your settings are on high, manually add www.google.com to your list of allowed sites. Learn more
©2013 Google - Google Home - Terms of Service - Privacy Policy - Help
i have done everything listed here so many times and nothing is fixing this. Made sure cookies were enabled, cleared cache and cookies, made sure Gmail was approved in security settings, and then as a last ditch effort, I disabled all add-ons for Firefox and still no Gmail... I was so desperate that I even re-installed ff-19 and still cannot get into my email account. What is going on here? Any help or small nudge in the correct direction would be much appreciated!

I used the same thing used in the first link 950400...
Firefox > Options > Options > Privacy > remove individual cookies > typed google > remove all cookies > typed gmail > remove all cookies
restarted Firefox and now I can log into gmail...

Intermittent problem with Personal Hotspot

Hello All
I think either my iPad 2 or my iPhone 4 is mental. Can anyone convince me otherwise?
For some months now I have been experiencing an intermittent problem with tethering my iPad 2 to my iPhone 4 Personal Hotspot.
Sometimes it works without a hitch (although I have to turn the Personal Hotspot on the phone off and on again to get iPad to 'see' it) and at others, like now, it shows me the message 'Unable to join the network 'iPhone'. It throws the message up so quickly that even though it 'sees' the phone in the list of networks, it behaves as though it can't actually be bothered to even try to connect.
I have tried reboots and restarts, 'forgetting' the network, changing passwords, sacrificing a chicken... all the usual stuff. But still when it gets in this kind of mood it stubbornly refuses to do anything. I have even taken it to the Apple store where, not surprisingly it worked first time and the assistant looked at me as though I was an idiot. It then proceeded not to work for a couple of days again as if punishing me. There is no problem with the general Wi-Fi connection as I have another phone (an Android) that I run as a Hotspot too. It has never once had a problem connecting to this or any other Wi-Fi connection..
Confusingly, and rather irritatingly, after a few days of this not-connecting lark it will have a few days of not having a problem connecting at all. I won't have changed any settings on either iPad or iPhone and so I have no way of figuring out why this is happening. This has been the same situation with all versions of iOS I have installed ever since buying the phone in April 2012, and the iPad in June 2012.
Please, is there anyone out in the ether that can suggest a solution to this? Or is one of my Apple products simply mad? I have given both devices a strong talking-to, but this hasn't sorted the problem either. Next, I think I might have to try sacrificing a goat.

I have the same issues with my iPhone 5 (6.1.4). I do not have an answer for you, and perhaps my "workaround" will lead someone with more knowledge about these things to offer us more information.
When I turn on the Personal Hotspot and it does not show up as visible on my iPad or MacBook, or offers that ambiguous message about being unavle to join the network, I perform a few steps that almost always resolves it. I have to go through these steps twice sometimes. The order of operations seems to affect the outcome (at least it appears to me that it does)
Turn off WiFi on the client device (iPad, MacBook, Windows laptop, KindleFire, etc)
Turn off Personal Hotspot on iPhone
Turn off Bluetooth on iPhone
Turn off WiFi on iPhone
Then turn on Personal Hotspot and allow it to automatically start WiFi and Bluetooth.
Turn on the client WiFi services.
Connection successful!
As I said, I sometimes need to perform the steps ablve twice, but it eventually works. It is incredibly frustrating to go through these hoops to make the device perform. I do not know precisely when the problem began to occur, but I don't think it did not occur on my iPhone 4s with IOS5.
Any help from the Apple guys would be appreciated. I think it is a software issue, because the shutdown of services and restart seems to resolve the issue. I guess I might take a trip to the Aple Store to have them look at this behavior.

Problems with file block settings

We manage file block settings via group policy. I have run into problems with the file block settings not working as advertised.
I've run into a couple of issues:
First, in Excel 2010 I would like to open Web Page and XML files in protected view rather than blocking entirely. Our "Set Default File Block Behavior" in the GPO is set to "Blocked Files are not opened." According to the
documentation, the settings for individual file types should be able to override this behavior but this is not the case in my testing. If I set "Web pages and Excel 2003 XML spreadsheets" to "Allow editing and Open in Protected View"
the files are still blocked and the Trust Center list the file as Do not open, not the GPO setting of open in protected view. I have verified via GPresults that the GPO applied successfully, rebooted the PC, etc. The "Set Default File Block
Behavior" is NOT overridden by individual file type settings.
According to the "plan file block settings" technet article:
The “Set default file block behavior” setting specifies how blocked files open (for example: does not open, opens in protected view, or opens in protected view but can be edited). If you enable this setting, the default file block behavior you specify applies
to any file format that users block in the Trust Center UI. It also applies to a specific file format only if you both enable its file format setting (for more information about individual file format settings, see the tables in this article) and select the
Open/Save blocked, use open policy option. Otherwise, if you configure an individual file format setting, it overrides the
Set default file block behavior setting configuration for that file type.
Second, even if I do change the set default file block behavior to open in protected view, I still cannot open XML spreadsheets. The trust center says that the file format is set to open in protected view but when I attempt to open a file it behaves
as if the setting was still set to block entirely.
The only thing that works is setting it to "do not block" which is not where I'd like to go - I would for security reasons like these types of files to open in protected view but there doesn't seem to be any way to do this contrary to the Technet
documentation.

Hi,
I had opened a case at Microsoft in 2012 about the «Open/Save Block, use open policy» parameter about HTM/HMTL files... Here is the answer I got from the support.
Hope it will help
Thank you for contacting Microsoft regarding your recent Office 2010 Hotfix request (SR 112022071246968) in reference to File Block settings on web pages. We have conducted a thorough investigation into this matter
and while we recognize the impact the issue is having on your business, we cannot accept this Hotfix request because it is acting as designed.<u5:p></u5:p>
Office will block any files that are explicitly set in the File Block UI by an Administrator when there is no built in validator. The Office File Validation scans and validates certain kinds of files and will
only display those applicable files in Protected View. We could provide a safe experience in Protected View for HTM, but it wouldn't be a useful experience. Linked content of the web page is not available (images, stylesheets, javascript, etc), so the
user would effectively see plain text. This is not the experience we want in Protected View, and it would encourage users to leave Protected View, putting their machine at risk. So HTM/HTML files are blocked.<u5:p></u5:p>
<u5:p></u5:p>

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

Problems with loading / saving settings of the lightening filter

I've problems with Photoshop CS2 / Windows 2000. If I open the dialog for the lightening filter, the list of the standard-settings is empty. And I can't also save any custom setting.
In the folder of the filter-settings and all standard-setting-files are available.
I tried to rename and reinstall the prefs-file and the whole program. But without success.
What's the reason? File system (NTFS)? User-rights in the file-settings? Registry-entries? Who knows a way to solve this problem?

Thread.currentThread().getContextClassLoader().getResource(imageFilePath); to load the images than the one you are using right now
Edited by: Mayya on Jun 17, 2008 4:34 AM

Build shared problem with configure / config.guess

Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolf

It really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor.

Problem with the config.xml

Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
Seetesh

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

My 4s is having a problem with person on the other end cannot hear me or my voice is garbled. I have to hold the phone in a very specific place to my face for them to hear me.

For about two months my iphone 4s has been having problems with people I call not being able to hear me or understand what I am saying. I can get them to hear my by adjusting the position of the phone on my face, it is a very narrow space and I dont get it just right the receiving party cannot hear me.
I have read similar discussions with no real fix to the problems. I have cleanout every orifice of the phone, turn it off and on, reboot to no improvement.
Any other suggests.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

6267 problem with personal config. settings

Similar Messages

Maybe you are looking for