6270 phone does not find service

I bought a 6270 phone in Dubai as I was told this phjone was supported worldwide. I had to send it back once when I was working in Saudi as after the first two weeks it the moddle buttons stopped working. Then I went to the USA and did nto use this phone for 1 year it performed brillantly sitting in my desk off. However I am in Brazil and started using it and after one week it stopped accepting the sim card sometimes and now it turns on and takes good pictures but does not find any service provider.
HELP

Try restarting your phone or perform a Restore Factory Settings which can be found on the settings menu.The security code(If you haven't change it) is 12345.
If the above steps still doesn't fix your phone, a visit to a Nokia Care Center might solve the problem.

Similar Messages

Lumia 620 (Amber) does not find a Bluetooth 4.0 he...

I purchased a BT4 heart rate monitor (Polar H6) after my Lumia 620 got the Amber update as the update promised to bring BT4 support to my phone. On the Nokia specifications page for my phone also states that Lumia 620 supports "Bluetooth 4.0 + LE". However, my phone does not find the heart rate monitor and I cannot pair the devices. It does find older bluetooth devices and the heart rate monitor worked fine on my friends iPhone.
Is there really support for BT4 LE in Lumia 620? Has anyone gotten Lumias to work with BT4 devices?

Just found this when googling how to build my own BT4 LE app:
http://developer.nokia.com/Community/Wiki/Introduction_to_Bluetooth_support_on_Windows_Phone_8
"Warning: At time of writing (24th October 2013) no public APIs have been made available by Microsoft for accessing additional features of Bluetooth 4.0 LE on any device.
Underlying support for Bluetooth 4.0 LE is enabled on Nokia Lumia 520, 620 & 720 by the Nokia Lumia "Amber" update. All other Nokia Lumia WP8 smartphones are expected to receive BT LE support as a future software update."

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

TS3367 phone does not always ring. I have full service. All sound settings are working.

phone does not always ring. I have full service. All sound settings are working.

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Reset, restore, Service.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.

I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.

Call it and ask whoever answers to give it back to you.

My ipad does not find my micro sim card? Whats wrong?

my ipad does not find my micro sim card. Whats wrong

Where did you get the phone? If it was hacked or jailbroken prior to the update, this is pretty typical. If that's the case, it's now a brick.

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Phone does not receive incoming calls

Please help. Verizon can't seem to. My phone does not receive 90% of its incoming calls or messages. I have been told to delete all of my messages and call logs- no use. I have tried removing the battery and resetting the phone. I did make sure the phone was not in "do not disturb" mood- it is not. People who call me say that it doesn't ring, just goes straight to voice mail even though the phone is on. Very frustrating problem as my 6 year old phone before seemed to give me better service. I feel like a child who is only allowed to make outgoing calls! Please help. All suggestions are welcome. Thank you.

Check the Call Forwarding section. There are two options to select. One says Forward All Calls and the other says Forward Unanswered Calls. Make sure Forward All Calls is not selected. That would cause all calls to go to the number specified which may be your voicemail. To get there from the home screen click the Phone icon > push the option button (left of the trackball) > click options > click Call Forwarding.

HT4515 phone does not ring during incomming call

phone does not ring during incomming call

Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this. Also ensure the volume is up. If you've checked these and still nothing are you able to call people? do you have service?

Remote device does not support servicedell wireless 350 bluetooth module + remote device does not support service

Hello,
I have a Palm Centro Phone and Dell Latitude D610 with a Dell wireless 350 bluetooth module. I can send pics from phone to laptop, but when i try to send from my laptop to phone, I get the following message:
remote device does not support service
Can anyone help?
Thanks,
George
Post relates to: Centro (AT&T)

Hi George, have you paired the two devices as a "Trusted Pair"?
Try pairing them from the Centro side.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

M127fn phone does not give signal fax when pressing 1,2,3

Hi, I am Marc and I am new to this forum. Kindly excuse me of any wrong doing on a prior notice. Thanks! I bought the HP M127fn 4in1 unit one month ago and I am still not able to use this unit fully. On my old fax, Panasonic KX-FP342, when the phone rings and I answer, I can make a normal phone call or press the fax signal button to give a fax signal if it is a fax. However, If I do not answer, the panasonic unit picks up the line and gives a fax signal automatically after 5 unanswered ringtones. With the HP M127FN, I am not able to do this procedure. For description, I have the HP unit connected to the wall outlet and 2 phones in my house. One of the phones is connected to the HP Printer extension port and the second phone is connected to another separate socket ( to the same phone number ). When the phone rings for 5 times and I dont answer, the machine picks up the line and gives a fax signal automatically ( which is the normal procedure). But, the problem is when I answer the line. When I pick up the line and the caller asks me to give him a fax signal, I press 1,2,3 ( i tried this using the normal line and the extension line ) but nothing happens on both lines. So i appologize to the caller and ask him/her to call again which is really annoying me since I get around 10 to 15 faxes per day. I want the unit to answer automatically give a fax signal ( regardless of the caller's type ) after 5 ringtones and I want to answer the phone and be able to give a fax signal by myself if necessary. Fax answer type = automatic, rings type = all rings, extesion phone line = yes, rings to answer =5. Please Help!!!!

Hi , Welcome to the HP Forums! I see that your HP Laserjet m127fn phone, does not give signal fax when pressing 1,2,3. I am happy to help! According to page 48 of your printer's user guide: LCD control panel 1. On the product control panel, press the Setup button.
2. Select Fax Setup, and then select Fax Recv. Setup.
3. Select Extension Phone.
4. Make sure that the On option is selected.
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3 sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence. The telephone company service does not work if it conflicts with the product. 5. Press the Back button to return to the Fax Recv. Setup menu.
6. Select Answer Mode.
7. Select Fax/Tel, and then press the OK button. With this setting, the product automatically picks up all calls and determines if the call is a voice or fax call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming voice call. 8. Press the Back button to return to the Fax Recv. Setup menu.
9. Select Fax/Tel Ring Time.
10. Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to notify you of an incoming voice call, and then press the OK button. Hope this information helps! “Please click the Thumbs up icon below to thank me for responding.”

I have a iphone 3G, i updated it.. and now when i go on to itunes its saying 'The Sim Card Inserted in this phone does not seem to be supported' Helppp please?

i updated it.. and now when i go on to itunes its saying 'The Sim Card Inserted in this phone does not seem to be supported' Helppp please

Some indian store :/
We get posts here, almost daily, from folks from India, who purchase locked iPhones in the US, only to find out they can't use them in India. I've always wondered what happens to those phones...

AIO remote does not find my printer

I changed Internet providers a few months ago. I have not been able to print from my iPhone or iPad since then. AIO remote does not find my printer at all.

Hi,
Both AirPrint and the HP AIO Remote app relies on Multicasting, a such have to be supported and enabled by your router.
Some routers support a such by default, some require settings changes and some do not support Multicasting which required for a such.
Please clarify your router brand and model to better understand any possible steps to try.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Does not find partition

I have 10.7 Lion and all my apps just stopped working (including finder). I tryed to hit the restart button, but it didnt shut down, so I used the Power Button.
When i started it up again, it goes to Mac OS X Utilities and does not find Macintosh HD. (The partition on my hard drive)
And i really does not want to reinstall it, because I have iOS apps in XCode that im developing.
MacBook Pro 13´ 2010 Model (Dont remember what month)
OS X 10.7 Lion
Crashed after debugging iOS app on my iPhone

It just says that my partition is OK . (And its not, because I cant start up my mac)
But, ill try just wipe out all data and restore it from a Time Machine backup

Ipad does not find printer

I have new Epson printer with airprint possibility. Printer is on wifi and iphone can see it and print files. but ipad does not find printer at all?

Apple has some troubleshooting tips at the bottom of this page that may help:
http://support.apple.com/kb/HT4356
Regards.

6270 phone does not find service

Similar Messages

Maybe you are looking for