6274: Network Policy Server discarded the request for a user
How to reproduce this event:
6274: Network Policy Server discarded the request for a user
Hello,
according to the following just use an older RADIUS client version:
Warning: NPS discarded the request for a user
This monitor returns the number of events when the Network Policy Server discarded the request for a user.
Type of event: Warning. Event ID: 6274.
This condition occurs when the NPS discards accounting requests because the structure of the accounting request message that was sent by a RADIUS client does not comply with the RADIUS protocol. You should reconfigure, upgrade, or replace the RADIUS
client.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Similar Messages
-
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
How to do Server 2012 R2 Network Policy Server MAC Authentication without adding ad users?
I have a Network Policy Server running on Server 2012 R2. I have set it up to do certificate and PEAP authentication for our 802.1x wireless authentication
and that works great.
Now I want to add a policy to this server so I can also do MAC address authentication our unauthenticated open wireless ssid so i can assign roles based on the
mac address. I got our Aruba controller setup to send the mac address to the radius server, but the radius server just denies access because I am not sure how to get it to use themsNPCallingStationID attribute.
I have found several ways do to this included adding active directory users for every single MAC address with the mac address as the username and password. I
do not want to do that. This is not an option.
I have also found several posts about using ieee802Device. I can't find a way to get that to work.
I also found a suggestion to use msNPCallingStationID ad attribute. I can easily set this for each user as their mac addresses but how do I configure the
NPS server to use this attribute to authenticate this?
If you have any other ideas on how to get MAC authentication to work, I would greatly appreciate it!
Thank you for your assistance!Hi,
I think you may have some misunderstand about the MAC address Authorization, MAC address authorization is based on the MAC address of the network adapter installed in
the access client computer. Like ANI authorization, MAC address authorization uses the Calling-Station-ID attribute instead of user name and password or certificate-based credentials to identify the user during the connection attempt.
MAC address authorization is performed when the user does not type in any user name or password, and refuses to use any valid authentication method. In this case, Network
Policy Server (NPS) receives the Calling-Station-ID attribute, and no user name and password. To support MAC address authorization, Active Directory Domain Services (AD DS) must have user accounts that contain MAC addresses as user names, therefore you need
add the MAC address as the computer user name and password,
To use the MAC address as user name and password is Cisco® switch require condition, about your switch device please ask your hardware vendor.
If you want to combine the MAC address MAC filtering and
EAP Authentication, you can refer the following related article:
Enhance your 802.1x deployment security with MAC filtering
http://blogs.technet.com/b/nap/archive/2006/09/08/454705.aspx
More information:
MAC Address Authorization
http://technet.microsoft.com/en-us/library/dd197535(v=ws.10).aspx
Authorization by User and Group
http://technet.microsoft.com/en-us/library/dd197615(v=ws.10).aspx
The similar thread:
NPS: Override User-Name and User Identity Attribute
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6dd983f9-973f-4d23-be0c-032d3a1592d0/nps-override-username-and-user-identity-attribute?forum=winserverNAP
The related third party article:
Configuring IEEE 802.1x Port-Based Authentication
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3550/software/release/12-2_25_see/configuration/guide/3550SCG/sw8021x.html#wp1170569
MAC Filters with Wireless LAN Controllers (WLCs) Configuration Example
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/91901-mac-filters-wlcs-config.html#backinfo
Hope this helps. -
Network Policy Server: No Domain Controller Available
When attempting to configure our domain controller as a Network Policy Server, I am receiving an error message stating that there is no domain controller available for domain K12.TX.US (which is the NETBIOS name of our domain).
The Full DNS Name of our Domain is : nederland.k12.tx.us
Log Name: System
Source: NPS
Date: 3/7/2014 12:55:51 PM
Event ID: 4402
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ADMIN-PDC.nederland.k12.tx.us
Description:
There is no domain controller available for domain K12.TX.US.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="NPS" />
<EventID Qualifiers="49152">4402</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-07T18:55:51.000000000Z" />
<EventRecordID>84518</EventRecordID>
<Channel>System</Channel>
<Computer>ADMIN-PDC.nederland.k12.tx.us</Computer>
<Security />
</System>
<EventData>
<Data>K12.TX.US</Data>
</EventData>
</Event>
Please help, as I believe that this is causing the following error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 3/7/2014 12:55:51 PM
Event ID: 6273
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ADMIN-PDC.nederland.k12.tx.us
Description:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: NULL SID
Account Name: abusby
Account Domain: K12.TX.US
Fully Qualified Account Name: K12.TX.US\abusby
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 00-19-92-0C-E4-E9:NISD_Testing
Calling Station Identifier: B8-E8-56-A8-D4-D9
NAS:
NAS IPv4 Address: 10.250.1.15
NAS IPv6 Address: -
NAS Identifier: -
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 0
RADIUS Client:
Client Friendly Name: Testing Access Point
Client IP Address: 10.250.1.15
Authentication Details:
Connection Request Policy Name: BlueSocket Wireless Connections
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: ADMIN-PDC.nederland.k12.tx.us
Authentication Type: PEAP
EAP Type: Microsoft: Secured password (EAP-MSCHAP v2)
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 7
Reason: The specified domain does not exist.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>6273</EventID>
<Version>1</Version>
<Level>0</Level>
<Task>12552</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-03-07T18:55:51.061488000Z" />
<EventRecordID>3106129068</EventRecordID>
<Correlation />
<Execution ProcessID="584" ThreadID="4712" />
<Channel>Security</Channel>
<Computer>ADMIN-PDC.nederland.k12.tx.us</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">abusby</Data>
<Data Name="SubjectDomainName">K12.TX.US</Data>
<Data Name="FullyQualifiedSubjectUserName">K12.TX.US\abusby</Data>
<Data Name="SubjectMachineSID">S-1-0-0</Data>
<Data Name="SubjectMachineName">-</Data>
<Data Name="FullyQualifiedSubjectMachineName">-</Data>
<Data Name="MachineInventory">-</Data>
<Data Name="CalledStationID">00-19-92-0C-E4-E9:NISD_Testing</Data>
<Data Name="CallingStationID">B8-E8-56-A8-D4-D9</Data>
<Data Name="NASIPv4Address">10.250.1.15</Data>
<Data Name="NASIPv6Address">-</Data>
<Data Name="NASIdentifier">-</Data>
<Data Name="NASPortType">Wireless - IEEE 802.11</Data>
<Data Name="NASPort">0</Data>
<Data Name="ClientName">Testing Access Point</Data>
<Data Name="ClientIPAddress">10.250.1.15</Data>
<Data Name="ProxyPolicyName">BlueSocket Wireless Connections</Data>
<Data Name="NetworkPolicyName">-</Data>
<Data Name="AuthenticationProvider">Windows</Data>
<Data Name="AuthenticationServer">ADMIN-PDC.nederland.k12.tx.us</Data>
<Data Name="AuthenticationType">PEAP</Data>
<Data Name="EAPType">Microsoft: Secured password (EAP-MSCHAP v2)</Data>
<Data Name="AccountSessionIdentifier">-</Data>
<Data Name="ReasonCode">7</Data>
<Data Name="Reason">The specified domain does not exist.</Data>
<Data Name="LoggingResult">Accounting information was written to the local log file.</Data>
</EventData>
</Event>Yes I did see that article, and there are plenty of logs from another device that authenticates via
RADIUS. Requests from our 802.1x wireless network are giving the "the specified domain does not exist" error. I can enter the username asusername,
username@domain, or domain\username and
neither method fixes the error. -
Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support -
When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanksHello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling -
keep getting this error:
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
I've also tried in IE and got this page can not be displayed.
Cleared cache, deleted cookies.
I'm trying to access grrlzrock.com I was using it about an hour ago, and now it doesn't work. any idea?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?
See:
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
load document in Firefox (clicking gmail "Documents", error: "The page isn't redirecting properly. Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
This statement pops up on some occasions when I am sending an Email, but the Emails are usually received by the recipient! who are mostly Family so I have been able to check that that have been read.
Hi mawhitehead,
try these
* '''The page is not redirecting properly''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/The_page_is_not_redirecting_properly
* '''Network.http.redirection-limit''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Network.http.redirection-limit
* I am unable to access my gmail calender. It states that refused because of cookies being blocked.<br>https://support.mozilla.com/en-US/questions/786049
* tried posting new thread on sourceforge shareaza forums, firefox gives problem loading page, <br>https://support.mozilla.com/en-US/questions/757368
* Firefox has issues redirecting, cookies are all on, I think I voided my warranty. <br>https://support.mozilla.com/en-US/questions/755435
* firefox message: "The page isn't redirecting properly" Firefox has detected that the server is redirecting the request for this address in a way that will never complete.<br>https://support.mozilla.com/en-US/questions/695393 -
firefox has detected that the server is redirecting the request for this address in a way that will never complete
This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
Question
firefox has detected the server is redirecting the request for this address in a way that will never complete. This is happening in my email program with comcast but does not happen with IE e editThanks to cor-el for the suggestion given in the link. Sadly I have to report:
1) It is not a bookmark problem and it makes no difference whether I put
www.adobe.com or 192.150.18.117 in the address bar.
2) Cookies are allowed and there are no exceptions set
3) All cookies have been deleted
4) network.http.sendRefererHeader is already set to 2
That deals with the items in the linked document.
Additional information:
5) I can get into the adobe site from a clean "in memory" installation of PuppyLinux using Seamonkey using the same router and dhcp setup.
6) un-installing all Mozilla products - rebooting and re-installing makes no difference even when I remove the mozilla folder from docs&settings.
so as I said in previous post (as annonymous) not a lot makes sense.
Bear in mind that I have no problem running tracert in a command window
Tracing route to www.adobe.com [192.150.18.117] over a maximum of 30 hops:
1 11 ms 10 ms 9 ms 10.0.0.1
2 13 ms 12 ms 11 ms glo-2-dsl.as9105.net [212.74.111.191]
3 13 ms 12 ms 11 ms ge1-2-27.glo0.as9105.net [212.74.106.106]
4 14 ms 12 ms 13 ms pos0-0.bri1.as9105.net [212.74.108.162]
5 17 ms 16 ms 17 ms ge0-0-0.he-lon0.as9105.net [212.74.109.14]
6 17 ms 17 ms 16 ms 10.72.11.75
7 16 ms 17 ms 17 ms xe-0-3-0-10.lon20.ip4.tinet.net [213.200.77.177]
8 91 ms 92 ms 99 ms xe-5-1-0.was12.ip4.tinet.net [89.149.184.34]
9 92 ms 92 ms 93 ms xe-0.equinix.asbnva01.us.bb.gin.ntt.net [206.223.115.12]
10 162 ms 170 ms 162 ms as-3.r20.snjsca04.us.bb.gin.ntt.net [129.250.2.167]
11 166 ms 166 ms 165 ms ae-1.r07.snjsca04.us.bb.gin.ntt.net [129.250.5.53]
12 162 ms 163 ms 161 ms xe-0-2-0-3.r07.snjsca04.us.ce.gin.ntt.net [128.241.219.86]
13 166 ms 163 ms 161 ms 192.150.18.11
14 166 ms 166 ms 165 ms www.adobe.com [192.150.18.117]
Trace complete.
and I can ping the site.
so where now ? -
I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.comSuddenly from yesterday I am getting this error while trying to opening gmail
-
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
* This problem can sometimes be caused by disabling or refusing to accept
cookies.In my experience this is most of the times a server issue of the website provider.
Does this error occur on all Websites or just one specific Website?
Does this Website load in Internet Explorer (or any other Browser?)?
Maybe you are looking for
-
Why are emails I deleted from another computer still showing up in my iPad inboxes.
This is just plain annoying. Every time I pick up my iPad, I have to delete dozens of emails I already deleted from my mailboxes (I have multiple accounts ... yahoo gmail hotmail etc.) I looked for a setting that would fix this, but nothing I'm findi
-
I have alot of songs in my itunes library and on my ipod. I tried to drag the songs from the library or purchased (like I normally do for my ipod) into the iphone and it won't let me. Is there something else I should do?
-
New Macbook Pro Connects to Network but not to Internet
I just got a new Macbook pro and I transferred everything from my old macbook pro from a timemachine backup. The internet works fine on my old macbook pro (running 10.5.8) but if I turn on the airport in my new macbook neither machine can connect to
-
BAPI Create Contract Account in Module PSCD
Hi all, I have a requirement create Contract Account (TCode CAA1) in module PSCD by BAPI. I use BAPI : BAPI_CTRACCONTRACTACCOUNT_CR1. I set value for some required parameters and Perform BAPI, i receive 2 error messages in RETURN parameter : - Enter
-
Is there a way to reuse a region in multiple pages?
Is there a way to reuse a region in multiple pages? For future maintenance, it would be easier to make changes in just one region. Maintaining multiple copies of a region is more work and eventually someone will forget to change one of the regions. T