6275i cradle

I currently have a 6155 phone and a hard wired kit in my car. I am having to upgrade the phone to a 6275i and have been told that nokia make a cradle that will fit the 6275i. I have been told that Nokia here in NZ do not bring these cradles into NZ. Can anyone help with a name and/or number for a place where I may be get the cradle

It is stated as not compatible.
Palm m500, m505, m515, Tungsten T, T2, T3, Tungsten C & Zire 71 USB Cradle & Charger - P10819 USB Cradle & Charger with A/C Charger
COMPATIBLE WITH: Palm i705 Handheld
Palm m125 Handheld: For HotSync® Only
Palm m130 Handheld
Palm m500 Handheld
Palm m505 Handheld
Palm m515 Handheld
Palm Zire 71 Handheld
Palm Tungsten T Handheld
Palm Tungsten T2 Handheld
Palm Tungsten T3 Handheld
Palm Tungsten W Handheld
Palm Tungsten C HandheldNOT FOR THE TUNGSTEN E OR ANY OTHER UNIT NOT LISTED ABOVE
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/tx/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705
Post relates to: Palm i705

Similar Messages

  • Hot Synch problems with cradle and Palm Vx

    I had to hard boot my Palm Vx for digitizing errors.  Now I can't get the pda and Hot Synch Manager to work.
    How do I set up the pda so if talks to the Palm 414EN.exe desktop download.  I have the old cradle attached
    to a serial port on my work PC.
    Thanks,
    Jay Rush
    Post relates to: Palm Vx

    Hello Jay and welcome to the Palm forums.
     The trick is that once you have installed Palm Desktop 4.1.4, in the HotSync Manager, you use the Setup... menu item to configure HotSync Manager to listen to the COM/serial port your cradle is connected to.  I had my Vx configured to use COM1 on my Windows 2000 box.
     Also, make sure that your Windows user account is a member of the Windows administrators security group before you attempt to install Palm Desktop.
    Hope that helps,
    Alan G

  • Troublesho​oting a paper jam and print cradle.

    Hi
    The print cradle cannot sometimes move to it's right position in my HP All-in-one Photosmart C3180 printer.
    I have tried several things and also been talking to customer support in Norway and in the U.S. about my isssues with the printer. It seems that my printer has done it's last printing job, but I'm looking for more help if there's another troubleshooting or if people here in the support forum knows about other procedures which can fix my printer.
    * Checklist of what I've done
    1. Resetting the printer accurately.
    2. Uninstall/install all print cartridges.
    3. Looking for any paper jams or barriers which can cause the print cradle to not move. But there are no barriers.
    The cradle sometimes wont get back to it's position only.
    3. Cleaning the printer (doesn't work because of the cradle wont move.
    4. Cleaning the cradle and sensors.

    Hello @AKAJEF ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    At this point all I can say is it is a hardware issue and you are looking at replacing the printer.
    Sorry to be the person that had to tell you that but I can't offer any more direction past what you have already done. I would recommend calling phone support back and seeing what options they have for you.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
    I hope this helps. Sorry that I couldn't be of any help, printers are hard to deal with when it comes to hardware as replacement parts aren't sold separately.
    I worked for HP.

  • Two IPods on the Same Computer/Cradle

    Both my kids have new IPODS minis. I bought a cradle thinking they could both use the same computer - same cradle to access IMUSIC. How do I configure IMusic so that when one IPOD mini is removed from the cradle/Imusic, and the other one is inserted, the IMusic list recognizes the second IPod mini. This has to be easy. Help you smart people out there.

    Jeff -
    I appreciate your prompt response, when I attempted to download the latest updater, I received the following error message during the update process, "Error: -1639 Invalid Command Line Argument. Consult the Windows Installer SDK for detailed command line help."
    Any suggestions? I appreciate any advice you can offer.
    James

  • How do I Sync a desktop app with a mobile app when cradled?

    I have a project where I need to sync data between a desktop application and an application on the device when cradled.  Does anyone have a suggestion on where I could find an example?  

    I love BlackBerry technologies but data communication between a BlackBerry and a PC is far from easy (= very tough) and very specific to the BlackBerry world.
    You could do your school project with a Windows Mobile device that does LDAP and SyncML. Those are mainstream standards, very well documented.
    if you want to stick to BlackBerry, on top of this page there is a "DEVELOPERS" link.
    good luck.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Itunes 10.5.3.3 still crashes on Windows 7 with /without shuffle in cradle

    Apple Support- I spent $250 to have my music backed up and Itunes and quicktime un and re (installed) after my laptop stopped rebooting due to trying to fix the latest itunes version. Today again after trying every possible usb combination of reconnecting (only my cradle) my shuffle 2nd generation Itunes still crashes seconds after opening.
    What the **** is going on!!
    Get it fixed or do a press release!

    After a complete lack of customer service from apple the new update today solved whatever the problem was.

  • Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

    Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • 3GS doesn't fit into iPhone Bluetooth Headset cradle?

    Just got my first iPhone, the 3GS. However, I already own the iPhone Bluetooth headset, which comes with a cradle that it supposed to accommodate the bluetooth and the iPhone. Since the new 3GS supposedly has the same dimensions as previous phones, it should fit, right?
    I tried putting the 3GS into the cradle and the latter was a tiny bit too small. The phone almost fit in the port but didn't, and I didn't want to force it. Anyone know if it's supposed to fit?

    It is not supposed to fit, and murray65 is correct - Apple never made a dual dock for the iPhone 3G, and in fact, early this year they discontinued the Apple Bluetooth Headset. You can either just use the travel cable to charge both devices, or you can use a Dremel (or carton knife, etc.) to widen the opening in the dock for the iPhone to accommodate the slightly larger and more rounded iPhone 3GS. See the last few posts in this thread for some links to pics of the process.

  • How to fit 5110 into car cradle in '01 Mercedes Be...

    I've just bought a secondhand '01 MB E320 which the owners manual tells me is set-up to take a Nokia 5110 so that hands free calls can be made via the in built Sat Nav system. I purchased a Nokia 5110 on eBay, it perfectly
    matches the pictures in the MB owners manual, the ID in the back of the phone (under the battery) verifies that it is indeed a model 5110.
    Problem: The phone won't fit the cradle:
    The connector pins match, the shape of the cradle recess is the same as the phone, but the stubby ariel prevents the top end of the phone from sitting down into the cradle recess. I've confirmed the car hasn't been modified, it's the original phone cradle that was put into the car at build !
    Any suggestions on a remedy?

    Hi naida
    I wonder whether as factory fitted cradle utilizes inbuilt antemma on the car instead of the phone's stub aerial.
    At the back of the 5110 below the antenna there is a connector for an external antenna. The connector may be protected by a rubber cap. If it is, first remove the cap before inserting phone in car cradle.
    Please see page 31 of the user manual.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 6230i Ford Car kit cradle

    I have a Ford factory fitted car kit that is part of my dvd touch screen sat nav system. I have a Nokia 6230i and it was recently stolen from my car along with the cradle. I bought a new 6230i and a new cradle from Ford but when I install it in the cradle it says enhancement not supported. The Ford dealer that supplied the cradle have tried several different cradles and have now told me that the one I have is for a 6230 and that Ford do not make one for the 6230i. But my original one worked so they must do! Does anyone have one that works? And if so can they tell me the part number?

    Sorry Dannyboy, but that won't work.
    You have the correct cradle for the 6230i and it will work even with the newest software released some days ago.(v3.89)
    "Enhancement not supported" is an indication for a problem with the ACI-Chip in the car's phone module (Accessory Control Interface-Chip).
    So there is a problem in the Nokia handsfree module.
    Unfortunately, there is no other possibility than going to your local Ford dealer and letting the "BT/VC" module replace.
    This error is known at all Ford hotlines and it should be no problem for your dealer to clarify this.
    Best Regards

  • HP Ext dvd drive (EXT MB CRADLE P07456 CNU402170K​, 4K0412 Rev V1.01)

    I have an HP Ext dvd drive (EXT MB CRADLE P07456 CNU402170K​, 4K0412 Rev V1.01) but I can't plug into HP elitebook 840, please assist on how can I use this drive thanksregards    

    I think the device you are looking at is the Multibay external caddy to use with a mutibay dvd drive. I don't think for a price of ten dollars or pounds or euros you are getting the Multibay device and the drive. No, the netbook does not have the usb+ port with a round plug next to the rectangular usb plug. However, that extra plug in is only needed on certain older units like the tc1100 and tc4200 pen tablets in order to boot from the external drive. The usb+ cable can be replaced with a standard usb A to B cable as with a printer or a mini-usb cable with an ordinary usb connector on the other end. Your netbook is set to boot from a regular usb external drive so you should be able to make full use of the drive without the usb+ connection. If you are actually getting the external box and the external drive for a "tenner" as you say then that is a very good deal. The mutibay externals I have worked with actually came with two alternate cables; a usb+ and an ordinary usb so just ask the seller very specifically if you are getting the unit in the original sealed HP box. If you are not getting the drive you can probably find just the drive for maybe another tenner or 20 dollars us if you can live with a dvd/cd burner combo and a dvd burner is going to be more like another 50 dollars so the mini-external usb dvd burner drive will start to look good by comparison. 

  • IPhone 5 getting very hot in car cradle

    I have bought a BMW cradle to charge my iphone 5 which also boosts the signal. It is an authentic BMW/Apple part. The iphone gets very hot even on short journeys. Is this normal?

    Hi Jooles,
    Normally, when you charge an iPhone or any Apple device it gets hot when you are using it . However, I'm using a Car Cradle as well that I bought few years ago and it doesn't gets hot. I think it depends on which brand or model you are using.
    Just a question, are you using a different cable? or an External Antenna?

  • Car kit cradle-adaptor for 6230

    please can someone tell me what i need for my car kit at the moment i have a 3310 system but have bought a 6230 and need some sort of adaptor for the cradle that is in the car as it is a different plug ect can you let me know where i can buy ect

    There are some cradles available to just plug in but they are not made by Nokia and there is quality issues. I would best advise you to upgrade you car kit to a new ck-7w, so you can guarentee compatability and make full use of you 6230i features, this kit will be easily upgraded next time you change phones so is a good investment.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • HELP! Connecting shuffle to cradle turns off monitor

    Hi, I've been having this intermittent problem that really starting to annoy. Sometimes while connecting my shuffle to the USB cradle my monitor will loose the video signal and go blank (looses video signal). Seems that the shuffle needs only to touch in male prong for the problem to happen. The only way to get the display working again is to reboot the PC.
    Here's what I have: 2nd gen 1 gig silver shuffle, Vista (SP1), 4 gig ram, C2D 3.0 ghz, Asus EP35-DS3R motherboard, GeForce 7200GS GPU, Gateway 2200 connected via DVI
    Oh, yes the problem happens no matter which USB input I use. I've updated all hardware and software, but I still have the problem.
    Anyone have any suggestions or a similar problem?

    Thanks,
    don't know why it'd matter if I had a warranty or not since the function
    in question is apart of what I'm supposed to be getting w/ cost of computer.
    Time to load the overpriced 1 ton computer into the car and demand they fix it at the apple store. This is absurd since I originally bought this computer for music creating and it's the most unreliable computer EVER as far as stability for music. My audiophile records for like 10 sec. before the sound cuts out, everytime, but of course that's not apple's fault.
    Never buying apple again. This is straw that broke the camels back. Anyone wanna trade a pc for my G5?
    Sorry for the venting but this is where I draw the line!
    Thanks,
    Henry

  • Zire 71 will not hold charge, resets every time taken off the cradle

    I just got a Palm Zire 71 at a garage sale and when I got it home I tried to charge it and try it out. It seemed like it was going to work just fine until I took it off the cradle. When taken off the cradle it goes off and won't turn back on and when I put it back on the cradle it goes through its initial setup procedure. I even made sure that it had several hours on the cradle before trying anything with it. I am wondering if it is just a bad battery. Any help with this would be greatly appreciated.
    Post relates to: Zire 71

    Certainly sounds like a dead battery to me! 
    Check usedpaparts.com for a possible replacement/repair.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for

  • How to refresh the list of SCs?

    Hello All, Here's what I have done so far. -Installed NWDI. -Ran the configuration wizard which created MYCOMPONENT, MYPRODUCT and SANDBOX track. -When I go to SLD, I see that MYCOMPONENT has 3 "BuildTime" "Dependencies" 1) DI BUILD TOOL 7.0 2) SAP J

  • WebEx session records issue

    Hi Guys, I have a problem is that when we attempt to record a webex session to be saved on WebEx server (in the cloud), using local MeetingPlace server and Webex Node, the video recording works but no audio is recorded. If we attempt to use Webex Mee

  • Debugger Not Stopping at Break Points

    Howdy folks, I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is

  • Formatting Questions about Quiz Answers

    Hi all, I'm in CP5 and working with a multiple answer slide. 1. I'd like to not have any numbering associated with my quiz answers. Is there a way to turn this off completely? There's no option under Quiz Properties, General, Numbering. 2. No matter

  • Replaced HDD, still not working

    Hi. Our MacBook stopped working for no reason. It wouldn't boot up, and just the flashing folder with a question mark appeared. After some searching it seemed like this is a common problem and most likely the HDD had failed. MacBook is 14 months old.