6280 with iPAQ h2200 - "pairing and connection rej...

When I attempt to pair my 6280 with my iPAQ h2200 I get an message "pairing and connection rejected for security reasons"
No problems pairing the 6280 with my PC or headsets, and no problems pairing my iPAQ with other devices or my Motorola A925 or A1000.
Is there a setting on the 6280 which will allow this pair?

Thanks, I found the Bluetooth Security update for iPAQ h2200 at http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/21093.html
Now works fine.

Similar Messages

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

Bluetooth paired and connected, but not showing up in device list

I have a iphone 4s and a plantronics discovery 975. It was working fine, I don't recall doing any updates... But now, it's showing paired and connected, but when I make a call, it's not connecting and doesn't sho up in the the device options - only shows speaker. I already did the 'forget device' and re-paired it and it still won't work. If I press the call button twice on the bluetooth, it'll call the last number dialed, so I know there's some connection... I'm lost... Any help would be appreciated!

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

Can i pair and connect lg to mac, can i pair and connect lg to mac

can i pair and connect lg 540 phone to my macbook pro

In that case, you can configure the AirPort Express to "join" the wireless network that the Home Hub is providing and stream AirTunes from your computer to the Express over the wireless network.
Things will work just fine as long as the Express is located where it can receive a strong wireless signal from the Home Hub.

Help with inline VLAN Pair and switch configuration

Hello,
I'm new to IPS and IDS in general, but I have an IPS-4255 and a couple of Catalyst 2900 switches to experiment with. I'm currently trying to enable an Inline VLAN Pair configuration on the IPS and have a simple setup.
SW1 and SW2 have vlans 100 and 200 configured. PC1 and PC2 are on the same IP range (no routing). PC1 on vlan 100 connects to Sw1. PC2 on vlan 200 connects to SW2. The IPS connects to a SW2 trunking port, and SW1 and SW2 are connected together on another trunking port.
I know that my trunking is working because PC1 and PC2 can ping each other whenever they are on the same vlan of either switch. But, they can't ping when on the separate vlans.
From what I've read, the IPS with an Inline VLAN Pair acts as a bridge between the two vlans and should forward the traffic if it passes inspection. However, the IPS does not appear to see any traffic at all.
My IPS is configured with inline VLAN pair 100->200 and associated to vs0.
Have I missed something in my config somewhere? Or am I misunderstanding how inline VLAN Pairs are supposed to work?
Below are my configs for the switches and the IPS.
Any help would be appreciated. Thank you!
IPS Config
service interface
physical-interfaces GigabitEthernet0/0
no description
admin-state enabled
duplex auto
speed auto
alt-tcp-reset-interface interface-name GigabitEthernet0/3
subinterface-type inline-vlan-pair
subinterface 1
description test
vlan1 100
vlan2 200
exit
exit
service analysis-engine
virtual-sensor vs0
physical-interface GigabitEthernet0/0 subinterface-number 1
inline-TCP-session-tracking-mode vlan-only
exit
exit
SW1 and SW2 config
interface FastEthernet0/1
switchport access vlan 100
interface FastEthernet0/9
switchport access vlan 200
interface FastEthernet0/18
switchport trunk encapsulation dot1q
switchport mode trunk
interface FastEthernet0/24 (Sw 2 only)
description IPS port
switchport trunk encapsulation dot1q
switchport mode trunk

It has been awhile since I've dealt with a 2900 switch to I am just trying to guess at what may be wrong with your setup.
I noticed that neither of your trunk port configuration are specifically stating which vlans are allowed on the trunks.
It is possible that for the trunk between the 2 switches there may be some protocol negotiation so the switches can determine which vlans to trunk, BUT no such negotiation will happen with the sensor. If I remember right you will need to specifically state which vlans the trunk to the sensor should carry. If I remember right the commmand would be something like:
switchport trunk allowed-vlan 100,200
You will want to find the show command on your switch that will show you which vlans are actually being trunked by the port. It might be something like "show switchport trunk"
And you will want to verify that the switch is actually trunking vlans 100 and 200 to your sensor.
On your sensor you will want to execute "show interfaces" and look at the statistics for Gig0/0 to see if it is receiving packets on vlan 100 and 200.
You can also run "packet display GigabitEthernet0/0" to see if any packets are making it to your sensor.
You will also want to check Link status and make sure your sensor is linking up properly with your switch. A common mistake is to connect the wrong ports, as some sensors do not have the port numbers clearly marked.
NOTE: If the above doesn't help, then take the additional step of eliminating the second switch. Attach both pcs to the same SW2 switch (1 in each vlan). The second switch isn't necessary to test the inline vlan pair functionality. Connecting both PCs to the same switch will help eliminate any possibility of misconfiguration between the 2 switches.

Pairing and connecting to Moto Cliq

I have set up my new Moto cliq to connect to my mac pro via bluetooth, however I cannot get it to connect, all it does is pair. Im trying to use as a modem, if anyone know how to fix please help. I have tried to call T-Moible but they cant help with this issue due to modem use with this phone is not supported. But it sounds like it is possible.

Hi! and welcome...
Can you see the printer in the Bluetooth Setup Assistant or does it fail at the pairing stage?
try this article...
'Bluetooth: Pairing fails if you do not allow initial scan to complete'
http://support.apple.com/kb/TS2225?viewlocale=en_US

Problem with web service proxy and connections.xml

JDev 11.1.14
Hello
I'm trying to create a web service proxy that takes advantage of the connections.xml so that the endpoints can be changed without recompiling the code (as described here http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/web_services.htm#ADFFD548 - 13.2.2 How to Create a New Web Service Connection)
I created the web service proxy using the Jdev wizard and a test client. The access to the web service works as expected.
The client test code is :
package model;
import ch.mit.trac.ws.proxy.*;
import ch.mit.trac.ws.root.Currency;
import javax.naming.NamingException;
public class wsTest {
public wsTest() {
    super();
public void testIt() throws NamingException {
    CurrencyConvertor currencyConvertor = new CurrencyConvertor();
    CurrencyConvertorSoap currencyConvertorSoap = currencyConvertor.getCurrencyConvertorSoap();
    Double res = currencyConvertorSoap.conversionRate(Currency.CHF, Currency.USD);
    System.out.println("Hello");
    System.out.println(res);
public static void main(String [] args) throws NamingException {
    wsTest tt = new wsTest();
    tt.testIt();
}I then create a connection as described in the docs.
I now have a connections.xml as follows:
<?xml version = '1.0' encoding = 'UTF-8'?>
<References xmlns="http://xmlns.oracle.com/adf/jndi">
   <Reference name="CurrencyConvertor" className="oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl" xmlns="">
      <Factory className="oracle.adf.model.connection.webservice.api.WebServiceConnectionFactory"/>
      <RefAddresses>
         <XmlRefAddr addrType="WebServiceConnection">
            <Contents>
               <wsconnection description="file:/C:/JDeveloper/mywork/WebServiceTest/Model/src/ch/mit/trac/ws/proxy/CurrencyConvertor.wsdl" service="{http://www.webserviceX.NET/}CurrencyConvertor">
                  <model name="{http://www.webserviceX.NET/}CurrencyConvertor" xmlns="http://oracle.com/ws/model">
                     <service name="{http://www.webserviceX.NET/}CurrencyConvertor">
                        <port name="CurrencyConvertorHttpPost" binding="{http://www.webserviceX.NET/}CurrencyConvertorHttpPost">
                           <operation name="ConversionRate">
                              <output name=""/>
                              <input name=""/>
                           </operation>
                        </port>
                        <port name="CurrencyConvertorHttpGet" binding="{http://www.webserviceX.NET/}CurrencyConvertorHttpGet">
                           <operation name="ConversionRate">
                              <output name=""/>
                              <input name=""/>
                           </operation>
                        </port>
                        <port name="CurrencyConvertorSoap12" binding="{http://www.webserviceX.NET/}CurrencyConvertorSoap12">
                           <soap addressUrl="http://www.webservicex.com/CurrencyConvertor.asmx" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                           <operation name="ConversionRate">
                              <soap soapAction="http://www.webserviceX.NET/ConversionRate" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                              <output name=""/>
                              <input name=""/>
                           </operation>
                        </port>
                        <port name="CurrencyConvertorSoap" binding="{http://www.webserviceX.NET/}CurrencyConvertorSoap">
                           <soap addressUrl="http://www.webservicex.com/CurrencyConvertor.asmx" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                           <operation name="ConversionRate">
                              <soap soapAction="http://www.webserviceX.NET/ConversionRate" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
                              <output name=""/>
                              <input name=""/>
                           </operation>
                        </port>
                     </service>
                  </model>
               </wsconnection>
            </Contents>
         </XmlRefAddr>
      </RefAddresses>So far so good.
I then created a new jspx page with a button that calls a method in a request scoped bean.
The method is supposed to use the connections.xml to get the web service proxy in order to call the web service.
The bean code is as follows :
package ch.mit.test;
import javax.faces.event.ActionEvent;
import ch.mit.trac.ws.proxy.*;
import ch.mit.trac.ws.root.Currency;
import javax.naming.Context;
import javax.naming.NamingException;
import oracle.adf.model.connection.webservice.api.WebServiceConnection;
import oracle.adf.share.ADFContext;
public class test {
public test() {
public void testIt() throws NamingException {
    Context ctx;
    ctx = ADFContext.getCurrent().getConnectionsContext();
    WebServiceConnection wsc;
    wsc = (WebServiceConnection) ctx.lookup("CurrencyConvertor");
    CurrencyConvertor currencyConvertor = wsc.getJaxWSPort(CurrencyConvertor.class);   -- NPE here
    CurrencyConvertorSoap currencyConvertorSoap = currencyConvertor.getCurrencyConvertorSoap();
    Double res = currencyConvertorSoap.conversionRate(Currency.CHF, Currency.USD);
    System.out.println("Hello");
    System.out.println(res);
public void testws(ActionEvent actionEvent) {
    try {
      testIt();
    } catch (NamingException e) {
}When running the application and clicking on the button I keep getting the following error at the line marked NPE Here above:
<LifecycleImpl> <_handleException> ADF_FACES-60098:Le cycle de vie Faces reçoit des exceptions non traitées en phase INVOKE_APPLICATION 5
javax.faces.el.EvaluationException: java.lang.NullPointerException
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.NullPointerException
     at java.lang.Class.isAssignableFrom(Native Method)
     at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:97)
     at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:118)
     at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processParameters(OperationMappingModeler.java:268)
     at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processMethod(OperationMappingModeler.java:155)
     at oracle.j2ee.ws.common.jaxws.runtime.ServiceEndpointRuntimeModeler.buildRuntimeModel(ServiceEndpointRuntimeModeler.java:114)
     at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.getRuntimeMetadata(WsClientProxyFactory.java:69)
     at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:126)
     at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:106)
     at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:219)
     at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:249)
     at oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl.getJaxWSPort(WebServiceConnectionImpl.java:399)
     at ch.mit.test.test.testIt(test.java:27)
     at ch.mit.test.test.testws(test.java:41)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     ... 44 moreCan anybody help as to what the problem is...
(the WSDL is at http://www.webservicex.com/CurrencyConvertor.asmx?WSDL)
Regards
Paul

Hi Frank
The page is ADF bound, I've added the page source and the adfc-config source below :
Page
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:form id="f1">
        <af:commandButton text="commandButton 1" id="cb1"
                          actionListener="#{test.testws}"/>
      </af:form>
    </af:document>
</f:view>
</jsp:root>adfc-config
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<view id="view1">
    <page>/view1.jspx</page>
</view>
<managed-bean id="__4">
    <managed-bean-name id="__3">test</managed-bean-name>
    <managed-bean-class id="__2">ch.mit.test.test</managed-bean-class>
    <managed-bean-scope id="__1">request</managed-bean-scope>
</managed-bean>
</adfc-config>It seems to be the same sort of problem as in Re: Error in ADF Web Service Connection
Regards
Paul

Having trouble with my airport wireless and connecting to FIOS

I had FIOS installed right after the holidays and have been having trouble getting my mac and airport to connect wirelessly to FIOS. I have an actiontec router and have changed it to a WPA security key. I worked on it about two weeks ago and got it working, not even sure what I changed. Then we got the last software update and it must have changed a setting back because it will no longer work. I can connect via a cable, just not wirelessly. It will say it found the network and is connected, but I can't get to the internet. Any help would be appreciated?

It sounds like your wireless connection is working correctly. You have power cycled all devices on the network, correct?
If not, power everything off for a few minutes, start the modem/router first and let it run a few minutes by itself, then start your computer(s).
If still no luck, can you temporarily disable the security on your network to see if you can connect that way? If you can, then it will take some experimenting to find a compatible setting between the router and computer(s).
If you can't connect with no security, then the focus turns to the router settings. Not sure what to suggest there as I'm not familiar with the FIOS equipment.

Jawbone Icon pair and connect to 4s but stopped working after 2 weeks.

The 4s shows the headset is connected and paired, but when a call is placed it does not show the bluetooth on the phone menu and does not send audio to the jawbbone. The jawbone also thinks it is connected and will give you a report of how much talk time is remaining. You can redial and answer by pressing the jawbone button, but the sound goes only through the phone and not through the jawbone. Setting the 4s to "forget" the headsets and then repairing them does not change the problem. Renaming the headsets and then re-pairing them does not fix the problem.
Finally, I tried what I should have tried first. I turned off the phone and turned it back on. Voila. I am posting this so people will be sure to try the easy solution first if you have this same problem.

Never mind!
I knew to check for lint stuck in the iPod and I had cleaned it out but figured "screw it" and gave it another try. Turns out I didn't go deep enough and there was still lint stuck in there. Got it all out now and it works perfect!

Oracle: slow performance with SELECT using ojdbc14 and connection pooling

Hello,
i'm working hard the last days to solve a performance problem with our customer using a oracle 10g database. For testing I used our oracle 9.2.0.1.0 database which shows the same symptoms. All doing solved nothing: the performance while using this oracle is much slower than other databases. This result I cannot trust and so I need some advice. What is missing to improve the performance on the java side?
The webapplication I use runs fast on MySQL 4.x and SQLServer 2000, but on the above mentioned Oracle it was always 4 times slower. The webapplication uses a lot of simple SELECT-Statements without complicated joins and so on (because it should run on many different databases). Doing some days of creating tests within this webapplication, I was not able to find any entrance point for a change. All databases server I'm using, having only the default configurations after a common installation.
To reduce the complexity I wrote a simple java application with connection pooling using only the latest libraries from apache-commons(dbcp, pool), and the latest ojdbc14 for oracle 9.2.
First the results than the code: MySQL needed less than 1000 millisecond, SQLServer around 1000 milliseconds and Oracle over 2000 milliseconds. I stopped pooling and the results are for Oracle even worse: over 18000 milliseconds (mysql:2500, sqlserver:4100).
I changed the classes for Oracle and used the class oracle.jdbc.pool.OracleConnectionCacheImpl from the ojdbc14-library. No difference (around 100 milliseconds more or less).
The only Select-Statement works on this table, which has one index on HICTGID.
It contains 259 entrances.:
CREATE TABLE HIERARCHYCATEGORY (
HICTGID                 NUMBER (19)   NOT NULL,
HICTGLEVEL              NUMBER (10)   NOT NULL,
HICTGEXTID              NUMBER (19)   NOT NULL,
HICTGEXTPARENTID        NUMBER (19)   NOT NULL,
HICTGNAME               VARCHAR2(255) NOT NULL
);The application simply loops through this table using
SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?, but I always open a connection before this query and closes this connection afterwards. So I use the pooling as much as possible. That's all SQL I'm using.
    protected static DataSource setupDataSource(String sDriver, String sUrl, String sUser, String sPwd) throws SQLException {
        BasicDataSource ds = new BasicDataSource();
        ds.setDriverClassName(sDriver);
        ds.setUsername(sUser);
        ds.setPassword(sPwd);
        ds.setUrl(sUrl);
        // The maximum number of active connections:
        ds.setMaxActive(3);
        // The maximum number of active connections that can remain idle in the pool,
        // without extra ones being released, or zero for no limit:
        ds.setMaxIdle(3);
        // The maximum number of milliseconds that the pool will wait (when there are no available connections)
        // for a connection to be returned before throwing an exception, or -1 to wait indefinitely:
        ds.setMaxWait(3000);
        return ds;
    }I can switch by using external properties between three databases (oracle, mysql and sqlserver) and if I want I can switch pooling off. And all actions I'm interested are logged by Log4J.
    public static Connection getConnection() throws SQLException {
        Connection result = null;
        String sJdbcDriver = m_oJbProp.getString("jdbcDriver");
        String sJdbcUrl = m_oJbProp.getString("databaseConnection");
        String sJdbcUser = m_oJbProp.getString("dbUsername");
        String sJdbcPwd = m_oJbProp.getString("dbPassword");
            try {
                if (m_oJbProp.getString("useConnectionPooling").equals("true")) {
                     if (log.isDebugEnabled()) {
                          log.debug("ConnectionPooling true");
                    if(null == m_ds) {
                        m_ds = setupDataSource(sJdbcDriver,sJdbcUrl,sJdbcUser,sJdbcPwd);
                          if (log.isDebugEnabled()) {
                               log.debug("DataSource created");
                    result = m_ds.getConnection();
                } else {
                    // No connection pooling:
                     if (log.isDebugEnabled()) {
                          log.debug("ConnectionPooling false");
                    try {
                        Class.forName(sJdbcDriver);
                        result = DriverManager.getConnection(sJdbcUrl, sJdbcUser, sJdbcPwd);
                    } catch (ClassNotFoundException cnf) {
                        log.error("Exception: Class Not Found. ", cnf);
                        System.exit(0);
(.. ErrorHandling ...)Here is the code fragment which is doing the work:
                 StringBuffer sb = new StringBuffer();
            while (lNextBottom <= lNextCeiling) {
                 con = getConnection();
                 innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
                 innerSelStmt.setLong(1, lNextBottom);
                 rsInner = innerSelStmt.executeQuery();
                 if ((rsInner != null) && (rsInner.next())) {
                     sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
                      if (log.isDebugEnabled()) {
                           log.debug("Inner Statement: " + rsInner.getLong(1) + "\r");
                 rsInner.close();
                 con.close();
                 lNextBottom++;
             if (log.isInfoEnabled()) {
                  log.info("\rResult values: Hictgid, Hictgname \r");
                  log.info(sb.toString());
             }and the main method:
    public static void main(String[] args) {
        try {
             long lStartTime = System.currentTimeMillis();
             JdbcBasic oJb = new JdbcBasic();
             boolean bSuccess = false;
             bSuccess = oJb.getHierarchycategories();
             if (log.isInfoEnabled()) {
                  log.info("Running time: " + (System.currentTimeMillis() - lStartTime));
             if (null != m_ds) {
                 printDataSourceStats(m_ds);
                  shutdownDataSource(m_ds);
                  if (log.isInfoEnabled()) {
                       log.info("Datasource closed.");
         } catch (SQLException sqe) {
              log.error("SQLException within main-method", sqe);
    }My database values are
databaseConnection=jdbc:oracle:thin:@SERVERDB:1521:ora
jdbcDriver=oracle.jdbc.driver.OracleDriver
databaseConnection=jdbc:jtds:sqlserver://SERVERDB:1433/testdb
jdbcDriver=net.sourceforge.jtds.jdbc.Driver
databaseConnection=jdbc:mysql://localhost/testdb
jdbcDriver=com.mysql.jdbc.Driver
dbUsername=testusr
dbPassword=testpwdThanks for your reading and maybe for your help.

A few comments.
There is of course another difference between your test cases then just the database. There is also the driver. And I suspect that in at least the case with the jtds driver it is helping you along where you are doing something silly and the Oracle driver is not.
Before I explain the next part I would say the speed differences between MS-SQL and MySQL look about right I think you are aiming here for MS-SQL level performance not MySQL. (For a bunch of reasons MySQL is inherently faster but there are MANY drawbacks as well which have been well discussed on previous threads)
Here is where I believe your problem lies
while (lNextBottom <= lNextCeiling) {
                 con = getConnection();
                 innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
                 innerSelStmt.setLong(1, lNextBottom);
                 rsInner = innerSelStmt.executeQuery();
                 if ((rsInner != null) && (rsInner.next())) {
                     sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
                      if (log.isDebugEnabled()) {
                           log.debug("Inner Statement: " + rsInner.getLong(1) + "\r");
                 rsInner.close();
                 con.close();
                 lNextBottom++;
             }There at least four things that are wrong with above.
1) Why are you preparing the statement INSIDE the loop. Let us for a moment say that the loop will spin 100 times. That means that you are preparing the same statement 100 times. This is bad. It is also very relevant because for example the Jtds driver is going to be caching the prepared statements you make so that actually while you try and prepare it 100 times it only actually does it once... but in Oracle I don't know what it is doing for sure but if it is preparing on each pass well than that bit of it is going take 100 times longer then it should.
2) You are opening and closing the connection on each pass through the loop... also a terrible idea. You need to fix this first so that you can repeatedly use the same prepared statement.
3) Why are you looping in the first place? More on this later.
4) Where do you close the PreparedStatement? It doesn't look like you do.
Okay so for starters your loop should look a lot more like this...
code]
con = getConnection();
innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
while (lNextBottom <= lNextCeiling) {
innerSelStmt.setLong(1, lNextBottom);
rsInner = innerSelStmt.executeQuery();
if ((rsInner != null) && (rsInner.next())) {
sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
rsInner.close();
lNextBottom++;
innerSelStmt.close();
con.close();
I think the code above (and you can put your debug stuff back if you want) which uses ONE connection and ONE prepared Statement will improve your performance dramatically.
The other question though I would as is why in the hell you are doing 100 or whatever number of queries anyway. This can be done all in ONE query which again will improve performance.
Your query and such should look like this I think.
String sql = "SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID >=? AND HICTGID<=?";
PreparedStatement ps = conn.prepareStatement(sql);
ps.setLong(1,lNextBottom );
ps.setLong(2,lNextCeiling);
ResultSet rs = ps.executeQuery();
while(rs.next()){
// your appending to string buffer code goes here
}and I can't understand why you're not doing that in the first place.

Major Problems with Captivate 5.5 and Connect Pro

I have a bunch of quizes that have 30 random question slides. Each slide pulls from various question pools. All of these quizes where created in Capitivate 5 and converted to Captivate 5.5.
My problem is that Captivate 5.5 is corrupting my quizes and preventing me from posting them to my Connect Pro server. If I fix the quiz to where it will post CAptivate 5.5 will eventually corrupt it again.
When I try to publish I get a "Failed to publish your project to the Connect Pro Server. Verify your Network Connection and then retry."
Also Connect Pro starts throwing up errors about my number of concurrent users has been exceeded. That is impossible since I have not release any training yet to anyone other than myself.
I did not have any of these problems until I upgraded to Capitvate 5.5.
I am about about two more errors away from abandoning Elearning as a career and going back to marketing and design. I have not seen one elearning product out there adobe or not that's not riddled with bugs. I though using Connect Pro and Captivate together would work because they are both made by Adobe.
ANy Ideas? I at the edge.

I just realize something. If I open a CP 5 file with quizzes save as a CP 5.5 with out making changes to the quiz it will publish with no problem. However if anything is changed on any question pool slide the project will no longer publish to Connect.
Every question has to be changed because Captivate 5.5 messes up all of the text alignment and some of it runs off the stage area and is not visible.
This is ridiculous. I should not have to rebuild all of my project files every time I upgrade.

BT headset pairs and connects, but doesn't auto-select

I'm posting this hear because I'm using Gnome front-ends to negotiate the bluetooth profiles/etc, but I know that it might be bluez or PulseAudio that's "faulty" here. That said...
I've got a pair of bluetooth headphones that work great. They pair, connect, and play audio just fine. However, once they've connected, I have to go into the audio settings dialog and select them over the default "Digital Output" device. It's the epitome of first world problems, but I kind of expect Gnome to figure out that the headset is the intended destination for audio streams, much like it does when you plug headphones in.
So, what's missing? I found some lengthy discussion on potential bugs in Ubuntu 12.04 when I Googled for this, but they seem to blame bluez < 5.0, whereas I'm running bluez 5.28-1.
Thanks in advance.

You could enable pulseaudio's "switch-on-connect" module, as per wiki. This means that once a new audio device is connected, all audio input will be routed to it.

Voice Mail Port Problem with CUCM 8.5 and Connection 8.5

Hi im having a very strange problem witch the voice mail ports between a CM 8.5 and a Cisco Unity connection 8.5 , i configured them and they registered and all was working fine, however when i rebooted the servers the ports stayed in status unknown i tried resetting them both sides, re adding config both sides and nothing after hours of trying and deleting and adding the same config it worked again, however we have a power outage today and the same thing happened again status unknown and still i cannot get them to register again. Any ideas or help would be appreciated.
Thanks,

I'm not sure but it could be a DNS issue. Is DNS configured or are you just using IP addresses? Make sure everything is resolving correctly.

Which format for external hard drive to use with time machine backup and connect to windows laptop?

Hi! I have an external hard drive on which I have transferred my iTunes library (just mine - not others). I have also a folder containing just films (some but not all of which are in iTunes too) Everything has been working just fine until yesterday I noticed that Time Machine was not including the external hard drive in back up as it wasn't formatted. So I have moved everything back to the Mac hard drive and and ready to format the external hard drive - but understand that if I do the contents cannot be opened from a windows laptop ... is that right? Is there are format I could choose that would allow Time Machine to back up and allow Windows to open as well (the idea being that I take the external hard drive with me on holidays etc!!) Many thanks for any advice.

ok - I understand. I have managed so far to format the drive (on windows) to exFAT file system - which apparently works with both Windows and Mac - but you're correct - it will not be included in time machine backup as I have checked the back up files and Samsung is not showing. Reckon I'm onto having to buy yet another portable hard drive just for windows - or of course buy myself a new mac book!! Can I ask you please - does the drive have to be clear of everything before I change the format - or can I change it with the files still in there? Also, got any quick ways duplicating the files onto another External Hard drive (for use on the windows laptop) At the moment the files are taking 2/3 hours + to copy over! Thank you!

HT6154 I tried to update Iphone 4 to IOS7. It is now frozen on itunes with picture of itunes and connection cord. can't make or receive calls. Help

I have tried to update y iPhone 4 with ios7 several times. The first time it did not update and erased all of my contacts. This time the screen went blank and is now stuck on a screen that has a picture of iTunes icon and a usb plug in. I cannot get it to move to another screen I cannot make or recieve calls. Help please.

You will have to restore your device using iTunes on a computer.

6280 with iPAQ h2200 - "pairing and connection rej...

Similar Messages

Maybe you are looking for