6288 message sending failed. Sending not allowed.

Hi,
I have a 6288, and just recently it has been coming up with the message 'Message sending failed. Sending not allowed' randomly when I try to send a txt. (A similar msg appears if I try to make a call as well). All other functions appear to work normally. The only way to get the phone to send/call is to switch off then on again. I can receive txt/calls when the phone is like this. This morning it also said that 'sim card registration failed'. Any help will be appreciated.

Have you tried updating your phone?
If not I would recommend you to do so.
Link here: http://europe.nokia.com/softwareupdate
Before the update be sure you meet the system requirements to perform the action and don't forget to backup your data first.

Similar Messages

  • I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

    i have a macbook and am using outlook 2011 as email.   receiving okay.   sending okay sometimes.  am now getting error message 4.7.0 not allowed when sending.  what is the cause? how do I fix please?

    I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to.  so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again.  i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

  • Exchange 2013 send as permission not allowed

    We have a Exchange 2013 server and Outlook 2010 clients. I have set full permission on other mailboxes with Powershell and in the ECP I set Send As permission for this user. But when I start Outlook 2010, go to the mailbox of one of the users and try to
    send an email as this user, the Outlook gives the error that send as is not allowed. What could the problem be?

    Hi,
    Please log in the Exchange Admin Center in Exchange 2013 to check whether the permissions are configured properly:
    1. Access ECP URL in IE to logon EAC as an administrator.
    2. Click recipients > Mailbox.
    3. Double-click the userA which is set full access permission and send as permission.
    4. In the User Mailbox window, click mailbox delegation to check whether the userB is listed under Send As and Full Access permission.
    If the permission is configured correctly, please try removing the permission and re-add it to check whether the issue persists.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

  • RFC Function Module - Message Reference parameters are not allowed with RFC

    Hi,
    I’ve checked the Remote-Enabled Module radio button, declared Import and Export parameters using ‘Type’ typing and checked the ‘Pass Value’ in export and import parameters but I still receive message ‘Reference parameters are not allowed with RFC’ and not able to activate the function module.
    Am I missing something?
    Regards,
    ...Naddy

    Hi all,
                   I faced the same problem and solved it ,
    You have defined a reference parameter for a remotely called
      function module. However, only value parameters are allowed
      for this type of module.
      Procedure
      Change the reference parameter to a value parameter.
    Guys  pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
    Regards
    Krishna Acharya

  • Why do I get the message "CoCreateInstance failed - Could not create 3D mouse device" with Acrobat9?

    Had a crash and reinstalled everything.  All is OK, except when I open Acrobat 9, I get the message "CoCreateInstance failed - Could not create 3D mouse device".  Tried unchecking anything in Acrobat preferences having to do with 3D, and I don't currently have a 3D mouse device installed.  Can't find any other reference in Google that includes both Acrobat and the contents of the message, part or all.  Ran "repair acrobat installation" and rebooted, and that didn't help.  Totally stumped!

    use the cs cleaner.
    first uninstall your cs5 programs (including acrobat) and uninstall adobe reader.
    run the cleaner for reader:  http://labs.adobe.com/downloads/acrobatcleaner.html
    restart your computer.
    then run the cs cleaner (http://www.adobe.com/support/contact/cscleanertool.html)
    restart your computer
    and finally reinstall your cs5 programs including acrobat (but not reader).

  • So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

  • Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.

    Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.

    I too am having the same problem. I have a new hard drive that was imaged from the old one and I'm trying to side load a book to my Nook Simple Touch.. I first installed ADE 4 then borrowed and downloaded a book from Overdrive. I tried a few times to delete and reauthorize both the computer and the Nook and each time I get an authorization error when I try to side load the book. I then found on the Nook forum that the Simple Touch and ADE 4 don't get along. So I uninstalled ADE 4 and installed ADE 3.
    I then followed this recommended procedure found on the forum: I deleted the Digital Editions folder from my Nook, launched ADE 3 and authorized the computer, then connected the Nook. For a few seconds, hovering the mouse over the setting icon for the Nook displayed everything on the context menu grayed out. But then it showed the context menu and I was able to display the Nook's authorization, which was the same as the computer's. Still get the same error side loading the book. Deleting and reauthorizing doesn't help.  And the Digital Editions folder is still missing from the Nook.

  • I have downloaded a book purchased on ebooks and I cannot get it transferred onto my nook - I get a message saying "ce copy not allowed. No permission to copy book. Help please

    I have downloaded a book purchased from ebooks and I cannot get it transferred onto my nook.  get a message saying "ce - copy not allowed. No permission to copy book. Help please.

    I have the same problem

  • Problems to shut down, restart my Mac it displays a message saying Safari does not allow it. I try to quit Safari and does not do it.

    Problems to shut down, restart my Mac it displays a message saying Safari does not allow it. I try to quit Safari and does not do it.

    Have you tried using Activity Monitor to shut down Safari?
    Ciao.
    Have you clicked on the Safari icon in the dock and seen if 'Force Quit' is displayed?
    Message was edited by: OGELTHORPE

  • Can't send email.  Get message saying server does not allow relaying.  I do receive email just can't send.

    WWhy can't I send email but can receive it.  I get the message that the server does not allow relay.

    Hello kathyfromfalcon,
    Welcome to the Apple Support Communities!
    I understand that you are unable to send email but are still receiving email. In this situation, with the relaying denied alert, I would suggest reading over the attached article and working through the steps provided.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Have a great day,
    Joe

  • Iphone  4s error sending email does not allow relaying

    I am having problems sending emails on my new 4s iphone.  I have an account thru qwestoffice.net and Yahoo.  Both receive but will not send. Keep getting error message that says "recipient was rejected by the server because it does not allow relaying".  This happens with both email addresses.  I have set the accounts up with the same settings as I previously had on my Iphone 3g

    When you checked the information, did you check the outgoing server settings?
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Import tables failed with message" BR1233E Owner name not allowed in param"

    Dear ALL,
    After finished sucessfully export some tables i try reimport the Tables, why give me a message like this screen below, Please help me,
    thanks and Best Regards,
    Chrisna
    FYI,
    I using the brspace command for export and import.
    Main options for import from dump file: /oracle/XXX/sapreorg/sdvmynml.edd/expdat.dmp
    1 * Import utility (utility) ............... [IMP]
    2 - Import type (type) ..................... [tables]
    3 - Owner for import (owner) ............... [SAPR3]
    4 * Tables for import (tables) ............. [SXNODES,SXROUTE,SXSERV,SXADMINTAB,SXDOMAINS,SOPR,SXADDRTYPE,SXCONVERT,SXCONVERT2,SXCOS,... (12 tables)]
    5 - Import table rows (rows) ............... [yes]
    6 - Import table indexes (indexes) ......... [yes]
    7 - Import table constraints (constraints) . [yes]
    8 - Import table grants (grants) ........... [yes]
    9 # Import table triggers (triggers) ....... [yes]
    Standard keys: c - cont, b - back, s - stop, r - refr, h - help
    BR0662I Enter your choice:
    c
    BR0280I BRSPACE time stamp: 2007-06-20 07.53.36
    BR0663I Your choice: 'c'
    BR0259I Program execution will be continued...
    BR1233E Owner name not allowed in parameter/option 'imp_table|-tables'
    BR0691E Checking input value for 'tables' failed
    BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action

    Thanks the issue already solved
    thanks and Best Regards,
    Chrisna

  • HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

    Java has updated again today,
    i use a java plug in to run my virtual software to access my work from home,
    today i have an error message saying that security will not allow access to my website
    i use to log in to work from, this is a JREdetection error,
    my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
    How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • I'm trying to pair my new iMac with Nokia 302, the pairing seems to work but then phone gives message that service is not allowed by the device

    I'm trying to pair my new iMac with Nokia 302 so that I can transfer 202 contacts to iPhone! All my Apple devices pair but the Nokia once acknowledging the apiring closes the connection with message "service not allowed on device" presumably the iMac etc. So what else should I try?

    I tried resetting the ipad, switched off wifi, checked date and time.

  • Message says I'm not allowed to post?

    I've been trying to post a question to the iPhoto community about backing up iPhoto, and when I try to submit the post I get the message "you are not allowed to create or update this content".  I've tried several times, logging out after each failure.  My time creating the post was only a couple of minutes -
    I've posted lots of times over the last couple of years without any problems - ?  I'm logged in - wonder if this one will go - ?
    Lynne

    Here's my suggestion for what it's worth. Purchase the shareware backup utility, Carbon Copy Cloner 4.0.2. If you are using Mavericks or earlier then download the 3.5.7 version. Version 4 is required if you are using Yosemite. You can use it to set up a scheduled backup of your selection of individual files or folders. The backup can be configured to run on a time schedule or only when you click the Run button or connect the backup drive. It will backup to any mounted drive including a network drive. It can be use together with Time Machine or without Time Machine. The latter is my preference.
    CCC can backup 65 GBs of files in a couple of hours over USB 2.0. Given that an iPhoto Library is seen as a single file, any backup program will do a complete backup each time. This is one reason many users will exclude it from a backup when that backup is done hourly. This also a problem with Parallels, Virtual Box, and VM Fusion pseudo-disks. Fortunately, CCC can be configured to do different backups on different schedules.
    If you don't require Windows compatibility any longer, then I would repartition and reformat the backup drive for OS X - partition using GUID instead of MBR; and, format Mac OS Extended, Journaled instead of MSDOS (FAT.)
    I hope this answers your question. I don't know why you had a problem posting it before.

Maybe you are looking for