6300 and Bluetooth handsfree problem

I experience this problem with my 6300 and the BH-700 bluetooth handsfree : When the person on the other end talks my mic gets muted and he can't hear me. Ofcourse this also happens if the other end is at a noisy place and then communication is impossible since my mic is always muted.
This seems like a problem of the phone since it happens with any bt-handsfree. On the other hand the BH-700 works fine with all other phones I tried...
I upgraded my phone firmware from 4.7 to 5.0 but the problem still remains. I don't want to think that the hardware implementation of the 6300's bluetooth and simultaneously send and receive data!
Anyone this problem? Any possible solutions?
Thanks!

Hi,
I have simillar problem with BT handsfree - the other side has difficulty hearing me, while I can hear fine.
Do you have any further experience or solution?

Similar Messages

AshTray and Bluetooth install problems

Was trying to install some old games on my ideapad S10e and somehow resorted to using AshTray custom resolution app (used with eeepc to help run certain games).. well to cut a long story short.. Dont use this app i was able to play a game (diablo2) but it changed all the default resolutions. In the end there was no way i could go back to the native resolution so i had to opt for first time pressing the F11 Recovery button.. took a little while but it did complete the process with fresh factory settings and rez back to normal. Then after that i check my device manager and it said that the bluetooth device wasnt installed. Strange cos everthing else was installed ok. I downloaded the bluetooth drivers for my S10e and clicked install.. it looked like it installed but for the life of me i still couldnt figure out why bluetooth was still yellow in device manager. Well just as i started writing this i figured it out if anyone else comes upon this problem (noob trap). Basically the BT drivers are "extracted" to C:\DRIVERS\WIN\BTW\54bl03ww and you need to run the setup.exe then it installs properly. I know im a noob but i would of thought it installed automatically like all the other device drivers. Quite impressed by the recovery mode appart from the BT hiccup it worked as good as i would expect.
oh well Panic over S10e is back to normal

Now the email began to work again:mansurprised:
Still having problems with bluetooth handsfree device: E 75 doesnt even ask passwords when I try to connect bluetooth handsfree and cant establish connection with voice devices. Bluetooth still works fine with my laptop or other phones! Does anyone have solutions?

5130c-2 Bluetooth handsfree problem

Hi,
I've got a weird problem with my brand new Nokia 5130c-2 - I'm trying to connect a Samsung WEP Bluetooth handsfree. It works perfectly on all other phones. My Nokia sees the device, and pairs it, however without asking for the device password. Then it's reported in Active devices, and also in paired devices, but it doesn't work. The telephone has the last updates - I checked it through the PC suite.
So, anyone has suggestions?
Thank you in advance.

Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

6300 and bluetooth GPS receiver

I have a 6300 and have just bought a Holux M-1000B GPS bluetooth receiver. Wondering if I can connect the two, put some maps on the 6300 and use the combination as a walkaround GPS system? Any pointers, recommended software, links etc?

Try here>>>>http://we-travel.co.cc/joomla/

Z3 compact bluetooth handsfree problem

Hi forum
i have a Huyndai i10 (the 2014 version) with build-in bluetooth - ever since i got the car from brand new in may, i have used my old Samsung Galaxy Wonder without any issues at all.
Today i got my Xperia Z3 compact - i paired it with the car without any problems - i can call and i can receive calls perfectly.
BUT - the syncronization of contacts and call history fails every time. It says 'Downloading' for some minutes and the give an error message.
Please can someone help - i really miss my full handsfree functionality!!
Best regards
Henrik
Denmark
Solved!
Go to Solution.

Hi MotomanDK,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
With the information supplied, I can suggest that you first try performing a reset to the in car kit and also remove the Bluetooth connection from the device.
Once done try using the service. The issue you may have here is that not all Bluetooth devices are going to be able to work with the in car system, this is due to a number factors related mostly to Bluetooth profiles.
I hope this helps.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

Short Version:
I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
Long Version:
I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
The iPhone(s) I am using are iPhone 4's with iOS 4.1
On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
The iPhones are set up in iTunes with names similar to dave1 and dave2
On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
Pairing alone is an event, but here's an example of what's happening:
I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
Open to ideas....
If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

Mac Mini and Bluetooth Recent Problems (Mighty Mouse, Wireless Keyboard)

Hello there,
I have an issue with my Mac Mini.
We had a storm here recently, so I switched my Mac off. After that, I turned it on, but to my surprise my Wireless Mighty Mouse and Wireless Keybord do not function any more. The green dot under the mouse nad keyboard flashes for a few seconds and turns off. I tried to plug my regular mouse and keyboard but it seems the do not work too. Any solutions?

i dont know if you have another mac around but have you tried repairing the disk by putting it into Target disk mode and hooking up another mac to it? if nothing else, try putting the install CD/DVD and boot from there by holding down "c" as it boots. if that works then it may just be a bad BT card. if it doesnt work then you may have bad usb ports. i hope you have applecare!
a tip for bluetooth HIDs, spread them apart. you will experience problems on occasion where their signals get crossed and they fail to sync right.
by the way, if you went the extra mile to turn off your mac because you were concerned about it, then why didnt you just unplug it from the outlet?

6230, TomTom and Bluetooth authentication problem

I have a 6230 and have just bought a TomTom Go 710 which connects via bluetooth to the phone for GPRS traffic updates. I have no problem pairing the two, but have to use the authentication code '0000' to authenticate the TomTom on the phone. I do not want to have to authenticate every time I connect so I have chosen to select 'yes' under the bluetooth option to NOT request authentication from the TomTom. This is where the problem lies - despite this selection I still get prompted for the code every time I switch on the TomTom. I have two other bluetooth devices paired - a PC dongle and a HDW-3 headset. Both of these are also selected not to require authentication and they are fine. I have also previously connected to a borrowed TomTom Go 700 and once paired this too behaved itself by not requiring authentication every time. I have tried everything that I can think of to cure this problem. I have removed the pairing from both the TomTom and the 6230 several times and re-paired them; I have selected 'no' to the 'requires authentication' prompt and then reselected 'yes'. None of these actions have had any effect. I have contacted TomTom and they are at a loss to understand the cause of the problem. Any ideas?

Hi, I have a TomTom 510 and have been experiencing the same problem. After much anguish at being pushed from pillar to post between Nokia and TomTom, I have been given a zip file by TomTom that has cured the problem and so at long last I no longer have to enter the access code every time.The file is :- Clear_Flash.zip . I suggest you contact TomTom on 08451610009 and ask them to e-mail the file to you.
Good luck

Mercedes a-Class and bluetooth sound problems

hi
both me and my wife have a iphone4 (4.3.5) and we are having bluetooth problems with her mercedes a-class 180, yes we can pair the phones but the sound quality is really bad. Once you are busy on a phone call you have to toggle between the iphone speaker and the builtin bluetooth to get better sound.
is there anybody that have the same issue? according to my local MB dealer it is a apple issue and not an MB problem.
anny ideas?

Yep, have a 2008 A-Class and have the same problem with an iPhone 4. Sometimes crystal clear but mostly like talking to a Darlek. Signal strength, motion etc dont seem to make a difference. Have searched the net in vain, did you find a solution?

Speaker and Bluetooth Headset Problem on Lenovo P70

Hello All, I have purchased Lenovo P70 one month ago. This phone is pretty nice for day to day use. But I am facing some peculiar problem as follows: While using any VOIP application like Skype, Viber, Whatsapp, imo (or whatever); if i try to go from earphone to speaker or bluetooth headset mode, I can't hear any sound. The sound nither plays on earphone or on the speaker or bluetooth headset. Even the other party can't here. Even my cheaper Lenovo A329 has no problem doing so. I'm sure this is a software glitch which needs to be fixed. For your information, my build number is P70-A_S129_150320_16g_ROW Kindly let me know if there's any solution.

Hey JameZ, Thanks for your reply. To be honest with you, I haven't tried the headset which came in box. but surely the speaker mode dosen't work properly in any VOIP application. the sound hangs for about 30-40 seconds and even after the sound comes, it goes again. As for BT headset, kindly see the screenshot below to get better idea. Since the BT headset works fine in normal calls, I'm pretty sure, the problem lies in the OS. If you have the device around, I would urge you to check for yourself for the problem. I have tried the similar things with my friends P70, the problem remains same. Kindly do the needful

9500 bluetooth handsfree problem since update

Updated my 9500 last evening. Today I have been unable to get my vehicle handsfree device to operate correctly.
When the phone and device are connected the handsfree unit sounds its incoming call tone constantly. When attempting to receive an actual incoming call (push the receive button) nothing happens except the constant ring tone.
Seriously considering rolling back the OS unless anyone has an answer. HELP!

A fix for this is by using a hybrid OS. It gives you a great OS for the 9530. Go to bbhybrids.ne and look for the .419/436 hybrid. I takes care of the voice dial with or without Bluetooth. It utilizes the .419 MTS Mobility .419 OS and the .436 hybridization from the folks at bbhybrids. Going hybrid is easy to do.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

N8 and Bluetooth handsfree

Hi,
I have odd problem when I connect my handsfree to my N8. After I power up HF device and it gets connected to phone everything seems to be fine. But after "HF is now connected" message in screen, phone is almost freezed or in some kind of slow motion next 30 seconds or something. I can't actually do anything while that. I think even emergency calls can't be done while that issue.
I have had this problem about two months now, everything is updated, no beta software in use. Does anyone else have problems like this? Any ideas what to do?
BR, Msq

So it seems that I'm alone with this issue :<

6210 and Bluetooth headset problems

Hi,
I have 6210 Navigator with SW version 4.13.
When I use Bluetooth headset (BH-602 or BH-604), the connection works just fine for the first time.
But if I turn off the Bluetooth headset and for example turn it on again next day (without turning off the phone in between), the connection between the phone and headset just does not work anymore.
I have noticed, that I have to go to the phones Bluetooth menu, turn the bluetooth OFF and then back ON. After these steps when the headset is turned on again the connection between headset and phone works.
This is rather annoying "feature" in the 6210 Navigator and I would like to ask what could be the problem ?

Hi Chris,
It would appear that a later firmware at V 4.0623 would increase stability in long running bluetooth connections.
I'm not sure if this will apply to you, as I don't have the same problem to confirm that it's fixed. But I would think it'll be a good try to get the firmware updated.
Let us know.
Cheers. ^_^;

Hp stream 8 and bluetooth mouse problems

can anyone help me
I just bought an Hp stream 8 and a wireless mouse and keyboard. The keyboard works fine, but the mouse I bought off of ebay isnt wanting to pair. It worked the first day but then shut the mouse off for the night and turned it back on the next day and was being really glichy, and then finally it wont pair at all. Is it the mouse or my tablet. If its the mouse, what kind of mouse should i purchase that will work but isnt ungodly expensive?

I can't really make product recommendations as a tech agent, but I would assume any Bluetooth mouse should work fine. It's more likely a case of this specific mouse having issues.
You can check out www.hpshopping.com for Bluetooth mice, there's some pretty cheap ones there that should do the trick just fine, and are backed by HP support.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

BlueTooth Handsfree problems

I've got two Motorola speaker phones. An older one and a brand new T305. I've had problems with both where the iPhone shows it's connected to the hands free and the audio is selected to use the hands free, but there's no audio and if I switch the audio to iPhone the caller is there.
Seems worse with outgoing calls. Incoming seems to fade the audio and lets me answer with the hands free. The problem only seems to happen when I have a cassette adapter attached to listen to the ipod on my car stereo.
Anyone had the problem and gotten it figured out?

My Iphone has update 1.1.2 and I am having similar issues with my HF850. It works on an intermittent basis and seems to attempt to reconnect to the Iphone constantly. I have found some documentation on the web confirming compatibility issues. For now, I am hoping that Apple will address the problem in future updates.

6300 and Bluetooth handsfree problem

Similar Messages

Maybe you are looking for