6300 - bug when exiting sms editor

I've got a Nokia 6300, firmware v5.00, on Orange UK.
I've found an annoying bug when replying to text messages. This is what happens:
- press 'reply'
- compose message and press 'send'
- press 'exit'
- rather than exiting, the phone goes to the 'reply as' screen, giving me the choice of replying as a text or an MMS.
- if I can press 'back', then the right soft key is now 'exit' and it works properly.
Any ideas how to fix this?

No, but there is a newer version of the 6300 firmware (v.5.5). Perhaps that would help.
Currently using 6300 & 6233 (backup)

Similar Messages

Two annoying bugs when exiting guided acces via Touch ID

When exiting guided access on my iPad Air 2 (iOS 8.1.3) via Touch ID, I encounter the following strange behavior:
1. the disabled areas I defined in the guided access mode (the "greyed-out" areas where touch input is not accepted) remain as grey areas on the screen, even when entering other apps or the home screen after having left guided access mode via Touch ID. However, though still shown on the screen, said grey areas are not active any more, i.e. touch input is accepted though being greyed-out. In short, guided access mode is indeed disabled via Touch ID as expected, but the previously disabled areas remain visible on the screen, which is quite annoying when, e.g., watching movies etc. The left-overs disappear only when starting guided access mode again, and exiting it via triple-clicking the home button and entering the passcode (i.e. NOT via Touch ID)
2. When starting guided access mode again in the same app as before, the previously defined disabled areas are not restored. I.e. every time I start guided mode, I have to define for each app its disabled areas over and over again, which is very annoying in daily use. Again, this forgetfulness occurs only when having left guided access mode via Touch ID before; having left via triple-clicking the home button and entering the passcode saves the set disabled areas such that they are restored when re-entering guided access mode.
Therefore, exiting guided access via Touch ID as currently implemented in iOS 8.1.3 does not make any sense at all, since the greyed out areas left on the screen are quite annoying, as well as re-defining the disabled areas over and over again is not quite useful.
Does anybody also observe this annoying behavior?

Update to iOS 8.2 did not improve the situation - exiting guided access mode via Touch ID still causes both issues...

IPhoto 11 bug when using external editor (Photoshop Elements)

In iPhoto 11, my iPhoto database is confused/corrupted whenever I edit a picture in my external editor (Photoshop Elements 8). I believe this is an iPhoto problem because the picture is not corrupted until I quit iPhoto try to re-open the edited version.
Steps I take:
1. Pick a file, and "Edit in External Editor". Duplicate of the file is made (ThisPic.jpg becomes ThisPic_2.jpg), and that duplicate is opened in PSE. I edit the photo in PSE, and hit Save - PSE updates ThisPic_2.jpg. I close PSE, go back to iPhoto, and I can do whatever I want to the file - double click to view larger, export, everything seems fine. When I pick "File | Reveal in Finder" and use either the "modified file" or "original file" option, they take me to ThisPic_2.jpg in the finder.
2. Close iPhoto
3. Re-open iPhoto
4. Now, that file seems to be corrupt in iPhoto. I can see the thumbnail image for ThisPic_2.jpg, but nothing else works. I double click on the file, and I get a black screen with a triangle and an exclamation point in it. When I try to export the file, nothing happens.
The interesting thing is when I go into "File | Reveal in Finder". When I pick the "modified file", it doesn't seem to find it - I am shown the root of my hard drive in the finder. But when I pick "original file", it takes me to ThisPic_2.jpg, and I can use preview to see that my edits are still there.
I copied that file to the desktop, re-imported it into iPhoto, and I can access that photo again through iPhoto - everything works, even after I close and re-open iPhoto.
I reported this through the iPhoto Feedback option. I thought I'd share what I found in case it helps anyone else.

Welcome to the Apple Discussions. I get the same response when I follow your workflow. If you select the thumbnail of that photo and use the Photos ➙ Revert to Original menu option you will be able to view the photo in full size.
Evidently editing in iPhoto with an external editor puts the edits on the duplicated original file and puts that file in the same Masters subfolder as the first file was imported into. Once iPhoto is restarted the links are messed up and the Revert gets rid of the "edited" link and keeps the link to the file in the Masters folder.
It definitely is a bug. However, it's not taking up more space on the hard drive than the edit that resulted in a modified file linked to the original file. There still are just two files.
Subsequent edits to the file with the external editor result is the edits being added to the file with no problems if iPhoto is closed and relaunched. The downside is that if you make 3 edits to the file you can't go back one edit. It's non reversible. The edited version can be deleted leaving the untouched original version.
Subsequent edits to the same file with iPhoto work as usual, with a modified version being created.
So Old Toad, I have just gone from iPhoto 9 to iPhoto 11 and step by step this is what is happening for me.
In iPhoto 9 if I selected photoshop to alter an image it created one duplicate version of the image and put that into the modified folder and that edited image became the image you would see in the events viewer. All very logical.
Now iPhoto 11 is doing the same for me but is creating multiple duplicates ie. everytime I select photoshop to edit an image. One image I edited recently has now got 6 versions in the library. If that is the way iPhoto works then that will be fine as it is doing it's job for me but the caviat is have I got 6 times the memory space being used up or does it just appear that way? If the memory space useage isn't being increased then I am OK with this new way of doing things but if the memory space is being used up then it is a fiasco - especially as apple are concentrating on writing their systems to use up less space than before in line with current thinking.
Look forward to you clarifying this point if you can.

Program Crash When Exiting Editor

I am running Photoshop Elements 8.0 on a Gateway PC with Windows 7 Premium Home version. I installed both Photoshop and Premiere Elements without errors. Whenever I used the editor in photoshop I get an error when exiting ther program. I get a message saying the program stopped unexpectedly and get the following:
PhotoshopElementsEditor.exe - No Disk
There is no disk in the disk drive. Please insert a disk into \Device\Harddsk1\DR1
I have to click cancel several times until the message goes away.
Any ideas?

How to set language in SMS editor ?

Hi, I use Nokia C-50. Since some time I cannot write SMS messages, because strange letters appear in SMS editor. Options -> Text language show me that Cestina language ist set. This is the first from the choice. When I set any other language like English or my Polish press OK and return to the editor I can write one letter and after it the editor switches back to Cestina language. How can I set the proper language permanently ?
Thak you in advance for your help
Zbyszek

Hi JudaZ, thank you for your answere. I was trying to identify my mobile phone. It seems to be E52 . I tried many times, but I couldnt find the menu entries you suggested to choose. In editor options i only have the following entries:
    "add the receiver",
   "put in (template)",
   "sending options",
   "message details",
   "text language",
   "help",
   "leave" .
This is my free translation from polish. Under "sending options" I have the following:
                ->SMSC Centernet,
   "Keys codings"->"full or limited service",
   "receiving reports"->"no",
   "how long the message is valid"->"24h",
   "message send as"->"text"
   "answere by the centr." -> "no"
I tried each entry. Nothins has helped. The language is Cestina all the time !
I'd be thankfull if you help me and answere one more
Regards
Zbyszek Lisiecki

How to set SMS editor languange permanently ?

Hi, I use Nokia E52. Since some time I cannot write SMS messages, because strange letters appear in SMS editor. Options -> Text language show me that Cestina language ist set. This is the first from the choice. When I set any other language like English or my Polish press OK and return to the editor I can write one letter and after it the editor switches back to Cestina language. How can I set the proper language permanently ? Alternatively how to reset the E52 to the factory state completely ?
Thank you in advance for your help
Zbyszek
Solved!
Go to Solution.

menu -> tools -> settings -> -> telephon -> general -> language has solved the problem

6500 slide freezes when receiving SMS

hi,
I own a brand new 6500 slider, its only a few weeks old and it has a very upsetting bug.
when the music player is on and the keys lock automatically (set for 1 minute), and i receive an SMS, the phone simply freezes.
The keys are useless, the light wont even turn on when i open the slide, the screen still turns of in its fashionable manner... the only thing i can really do about it is removing and returning the battery to its socket.
Software version is 4.84.
Can anyone help me?
Thanks,
nucleus.

@L-OS
I forgot to ask, are you using the prelaoded messaging app?
any taskillers or antivirus?
ram apps, booster apps?
third party home launchers?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Firefox crashes when exiting on i7-920, OSX-10.7.2 Lion Fully updated

This happened before.. i used app zapper to remove FF8, then reinstalled FF 7.01.. no issues with 7.01. Verified Addons with Addon checker (everything up to date)
Used update channel to install FF8 ... Still Crashing when exiting Yahoo Mail and Yahoo Games.
Hardware info... i7-920, 6GB Ram, 1TB HD, Nvidia Graphics. OSX-10.7.2 Lion Fully updated
BTW Appzapper removed everything including profile... ITS NOT PROFILE RELATED.
Still Happens in Safe Mode... Going Back to 7.01 after AppZapping 8.0 .
Must be Related to some change in LION because FF8 works fine on Snow 10.6.8. Perhaps Permissions need to be modified in the Script for FF8, Perhaps Plugin related. Not Sure, but 7.01 Works without Crashing.

On Mac systems with Java version "1.6.0_29" (Java SE 6 Update 29), Firefox 8 will crash after running a Java applet when closing the tab or hitting the back button. This is a new crash that only occurs in Firefox 8 (or above) and is being investigated ([https://bugzilla.mozilla.org/show_bug.cgi?id=700835 bug 700835]).
Ref: http://kb.mozillazine.org/Firefox_crashes#Plugins - Java (Mac OS X)

Cannot pop up sms editor on Nokia N97

The Nokia N97 is a Symbian S60 v5 phone like the Nokia 5800 XpressMusic.
We use the following simple script on the 5800 to pop up the SMS editor, but it does not work on the N97. Nothing pops up - strange.
on(Release)
getURL('sms:?body=abc');
Is this a bug on the Flash Lite implementation on the N97? The phone we used was new.
Thanks in anticipation.
jz

Hi Alessandro,
Our current solution is that:
For mobile phones like 5800, n97,n97 mini ...etc. we now use nokia library to popup sms editor. This is not ideal as we have to populate the "To: field" otherwise it does not work. For all others, we use getURL to popup the sms editor and it's a great solution. The n97 was the problem phone as getURL worked for the 5800.
Our engineers response was as follows:
"I think what he means is whether I put the getURL code inside on(press) instead of on(release).
At this time, I check that I use keylistener's keydown/keyup event in our semobile application and use on(release) in testing program.
I can't remember whether we tested some codes using on(release) before. But it's quite unbelievable that only on(press) works instead of others although we can try it."
Our applications are at www.stockexpress.com.hk/mobile
Best regards,
Roger Durn

"An internal error has occurred" error when exiting

hey Adobe you've got a bug in your updater...
read here:
http://www.adobeforums.com/webx/.3c06325e/0
I also experience this weird "An internal error has occurred" when quitting Acrobat 8.1.2 its there since the very minute i updated from 8.1... now i wish i could revert the update...
UPDATES ARE SUPOSED TO IMPROVE THINGS NOT BREAK THEM !!
Can anybody solve this ? I dont want to be force-quitting acrobat forever...

---- PROBLEM SOLVED IN MY CASE ------
this is what i did:
I have Acrobat 8.0.0 installed as a part of Creative Suite CS3 installation...
1- i ran the Creative Suite CS3 installer
2- i choose UNINSTAL Acrobat 8 only, leaving the rest of CS3 suite installed, its very important to UNINSTALL and not REINSTAL or REPAIR as REINSTALL or REPAIR doesnt help anything...
3- after UNINSTALLING Acrobat 8 i used DiskOrder (or any good file manager which can search inside hidden and system folders) and searched for the word "Acrobat"
4- i got about 70 results (mostly folders in Prefrences, Cache, etc.) i deleted manually everything related to Acrobat - that was pretty risky but i was lucky...
5- i ran Creative Suite CS3 installer which gave me a new option INSTAL ACROBAT 8.0
6- INSTALLED ACROBAT 8.0 and WITHOUT restarting i IMMEDIATELLY applied 8.1 and 8.1.2 updates
7- restart
DONE
NO MORE "An internal error has occurred" MESSAGE WHEN EXITING ACROBAT

The latest version of iTunes com addin for outlook cause outlook to hang when exiting

iTunes Version 11.0.0.163 com addin for Outlook causes Outlook 2003 used on a Windows XP machine to not close when exiting. I have verified via the Task Manager that it Outlook does not close. I have gone into Outlook and disabled the addin and Outlook closes properly. Enable it again and Outlook once again does not close. This did not start hapening until I upgraded to the latest version of iTunes. I have both an iPhone and iPad that I need to keep synced with my Outlook calendars, contacts and notes.
How do I get in touch with someone at Apple to report this. I have been all over their website, but cannot seem to find any email or phone number to report software bugs.

Hey Gambitv,
Thanks for the question. I understand you are experiencing issues downloading and installing iTunes. The following resource may help to resolve your issue:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

OS X Lion: Fix for wireless not reconnecting when exiting sleep mode

http://www.tech-recipes.com/rx/18931/os-x-lion-fix-for-wireless-not-reconnecting -when-exiting-sleep-mode/

I have the same symptoms with a 2011 iMac and my Senheiser Bluetooth headphones.
10.7.3 did not correct this bug.
I'm also using MS Messenger and notification sounds are also buffered until the headphones are switched on.
I found other threads dealing with this bug :
https://discussions.apple.com/message/5962104#5962104
https://discussions.apple.com/message/12837199#12837199
http://apple.stackexchange.com/questions/26991/os-x-lion-mail-app-sound-effects- bug
https://discussions.apple.com/message/15856803#15856803
I'm currently trying the tip given in the last discussion :
"Success - in the Audio Midi Setup (Applications/Utilities) I changed the output to 2ch - 32bit Float and all the audio works well."
My headphones already had this setting, but internal speakers had 2ch - 24bit... is it a possible explanation ? Time will tell ...

30EA2: Data Modeler Viewer annoyance when exiting

Hi,
Almost always when exiting sqldev, I'm prompted with a dialog stating the 'Data Modeler Viewer is waiting for tasks that should finish, such as writing files', being able to Wait or Exit now. In the Log, I get an entry 'Delete Design: "Untitled_1"'.
Please make sure to clean up correctly before prompting such a dialog.
Thanks,
K.

Hi,
I can confirm this is happening on me too.
I am confused, since I didn't invoke Data Modeler Viewer, yet the prompt appears just before prompting to Save the modified Worksheet.
This probably a minor bug, but hopefully to be addressed, since it is quite confusing.
Regards,
Buntoro

InputVerify ... ugly shouldYieldFocus when exit dialog or windows

yes, maybe I should just skip InputVerify, but I figure I maybe able to learn somethere here.
I am verifying make sure the jtextfield only has number and it's a required field, everything is okay here. but when I tried to close my dialog it pops up the InputVerify message.
My cancel button uses
buttonCancel.setVerifyInputWhenFocusTarget( false); of course the dialog didn't have that method
so I tried to search for some idea, but so far I think I had to use override shouldYeildFocus() method, but can I make the jcomponent to see it's a dialog not jtextfield??
This is kinda close.
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=739038
also I tried to add a method QuitListener
protected class QuitListener implements ActionListener, WindowListener {is there a way to disable InputVerifer?
Message was edited by:
ekin_00
add code around setVerifyInputWhenFocusTarget
Message was edited by:
ekin_00

A: InputVerify ... ugly shouldYieldFocus when exit dialog or windows

Works fine in the [url http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html#inputVerification]Input Verification Demo.
I changed the code to display the panel in a dialog instead of the JFrame.
//        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        JDialog dialog = new JDialog();
        dialog.setContentPane(newContentPane);
        dialog.pack();
        dialog.setVisible(true);And if you add code to display an option pane in the verify method you need to do it like this to get around a bug:
        public boolean verify(JComponent input) {
             boolean value = checkField(input, false);
             if (value == false)
            input.setInputVerifier(null);
            JOptionPane.showMessageDialog(null, //no owner frame
                                          "something is wrong", //text to display
                                          "Invalid Value", //title
                                          JOptionPane.WARNING_MESSAGE);
            input.setInputVerifier(this);
               return value;
//            return checkField(input, false);
        }If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program (SSCCE) that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Asha 503: Bug when typing

There's a bug when typing in the Asha 503.
When typing in some apps (Whatsapp and Facebook Messenger for example). If you lock the phone while the keyboard is up, when you unlock it the keyboard will cover the bottom part of the app and you won't be able to see what you're typing and you have to close the keyboard by pressing the Back button and then open it again touching the writing area.

Hi ViRUS2013,
We have tried it on our end and it seems working fine. Does it happen as well when typing an SMS (text message)? If yes, try to check if your phone has the latest software. See this link for more info: Software update instructions. Otherwise, there's a possibility that there's an issue with the app itself. Try to report the issue with the app developer for them to fix it.

6300 - bug when exiting sms editor

Similar Messages

Maybe you are looking for