6300 Contacts cannot be changed after update to fi...

Hi, I updated the firmware and since then I cannot change an existing contact.
Has anybody else experienced that problem?
Best,
schottide

Hi,
I found a solution myself. Now my contacts can by synchronized.
Here are the steps I made to get rid of "corrupt" contacts:
- udate firmware to version 5
- make sure you use the phones memory for contacts
- look at: Contacts -> Settings -> Memory in use
- move all contacts from phone to SIM card
- Names -> Options -> Mark all
- Options -> Move marked
(If you have more than 100 contacts its ok, only 1000 will be moved)
- change phones memory for contacts to SIM
- Contacts -> Settings -> Memory in use -> Sim Card
- move all contacts from SIM card to phone
- Names -> Options -> Mark all
- Options -> Move marked
- change phones memory for contacts to phone
- Contacts -> Settings -> Memory in use -> Phone
After I did that, I can now sync my contacts...
Disadvantage: If you have more than one telephone-number associated to a contact it will be split into several contacts. E.g. Tom Miller will bei Tom Miller1 Tom Miller2. But this can be easily changed on the pc afterwards...
schottide

Similar Messages

Facetime? I have been having audio issues where by my contacts cannot hear me after a while.. why is this...?

facetime? I have been having audio issues where by my contacts cannot hear me after a while.. why is this...?

Don't know. You asked in the wrong forum community. Try next door, down the road, around the corner and through the cornfield maze - Facetime for Mac community

Re: Personal Account number changed after update

Personal Account number changed after updating Virtualstore and now I can't login with my current account information. Changed from 35482 to 35555

i have created already an account after reset but then asked for an update. I did it and now asks for username and password :) still says incorrect username/pass

TS4002 Cannot locate iCloud after updating to iOS 6

Cannot locate iCloud after updating to iOS 6 on my iPad 3

Disable all restrictions in Settings > General >Restrictions

Cannot send email after update on iphone 5

cannot send email from one account after update, states my password and/or user name incorrect. I have it written down,it's not incorrect.

After the iOS 7 update, in order to send email from my iPhone5 and my daughters (also from our iPads) I had do follow Apples reset instructions. Hold the HOME buttton and the START/AWAKE button until your device restarts and you see the Apple logo when your device restarts. You do not have to swipe the message bar which shows up sometimes as your iPhone is shutting down. Sadly to say, but on my daughters iPhone 5, I had to do this 5 times.
If you live near an Apple store, make them do it so that someone at Apple will send a fix for other people. I looked for a simple way to contact Apple and there is none. There is a series of prompts and links that are time consuming to be able to reach support about even a simple problem.

Cannot download Iphoto after updated to Yosemite

I cannot update Iphoto anymore after updated to Yosemite. The system popped up a small window and showed that: update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. But it is my own account, I just changed the password.
Please help me to solve this problem.

That means, that your AppleID is not associated with the iPhoto version you have installed.
Which version of iPhoto do you currently have? Sign into the App Store with your Apple ID (in the Store" menu).
If iPhoto came preinstalled on your Mac, check the "Purchases" tab of the App Store, if there is an "Accept" button besides iPhoto. If yes, accept iPhoto to associate it with your Apple ID. Then try again to update.
If that does not work, uninstall iPhoto - move the iPhoto app from the Applications folder to the Trash and then go to the "Featured" tab of the App Store, search for iPhoto using the Search field, then press the "Get" button to install iPhoto again, this time with your current AppleID:

Language change after update to Lightroom 3.2! Help asked!

I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
Can anyone help me here, as I cannot import pictures I made in the right format now!!!
Ton Soneveldt

The answers is in this thread: http://forums.adobe.com/message/3042985#3042985.

I cannot run iPhoto after update to Yosemite. I cannot update iPhoto because the application store does not have any iPhoto update available. Anyone can advice how to overcome this hassle?

After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?

mende1 wrote:
Unfortunately, Apple has removed both iPhoto and Aperture from the Mac App Store so they cannot be downloaded anymore. This means you are forced to migrate to Photos (included in OS X 10.10.3) or, if this app does not include features you need, look for a different app.
Not true. Apple has removed both Apps from App Store so you cannot buy them anymore. But if you have any of these Apps already purchased in the past, then you can still download them on your Mac.
Aristotle247 wrote:
After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?
Open App Store, sign in with your Apple ID and go to Purchases tab. If you see iPhoto app listed there close down the App Store and do this steps as this is what worked for me:
Open Finder and go to Applications folder.
Locate iPhoto app
Drag iPhoto app from your Applications folder to Trash (NOTE: Do not emptied Trash yet)
Open App Store app and navigate to Purchases tab.
Click on Install button which is next to the iPhoto app (on the right hand side).
Once iPhoto is downloaded again, test it if its working for you. If all is ok, you can remove your Trash.

HT1430 What to do if the message shows "cannot activate iphone" after updating ios5?

After updating to ios5, got the message "no sim card". I turn off and restart, then reset language, country or region, connect to itune, "cannot activate iphone" I dont know what's going on?

There are several possibilites:
Your security software (antivirus and firewall) is preventing iTunes from communicating with Apple's Activation server, gs.apple.com.
You have a redirect in your hosts file for gs.apple.com. Open the hosts file and delete any lines that contain gs.apple.com. For the location of the hosts file, on a Mac it's /etc/hosts, on Windows it's c:\windows\system32\drivers\etc\hosts.
Your phone was hacked or jailbroken to unlock it from the carrier it was locked to, and updating it the phone became locked to the original carrier. For this there is no solution that can be discussed in an Apple forum.

HT4623 How can I retrieve my Contacts that I lost after updating iOs 6 on my iPhone 3GS through wifi?

I lost all my Contacts after updating iOS 6 on my iPhone 3GS through wifi. All my other apps, Notes, Photos, etc are as it is but none of my Contacts appear. I also signed up to iCloud during the update but can't find Contacts on iClouds. Pls help!

It is strange people experience this problem only with Contacts because normally contacts are backed up with Notes and Photos and that stuff. If you are willing to do a do-over, you can try to backup, restore, and put your data back on again and see if anything new appears. You never know if some file clould have had some kind of conflict because iOS 6 was being installed while data was being restored at the same time.

Software Component Version cannot be changed after Importing Objects

Hi Gurus,
I was trying out the import export function of XI. I export a message mapping and then re-import it back into XI. However, after doing that, it is telling me that the Software Component Version cannot be changed. I'm now unable to make any changes to any of the objects.
Is there anyway to go ard this?
Thanks in advance.

Hi,
I tried ticking the check box. But its giving me the following warning
Originality indicator for the software component version set later Ensure that the software component version only contains one original repository
i ignored the error and activate the change list.
However, im still unable to make changes. I tried ticking the "Original Objects" as well but still unable to change.
Thanks.

Cannot get mail after updating to 10.8.3

After updating to OS X 10.8.3 I cannot get e-mail any more with Mail. I can send e-mail though. If I log in to the web interface I can see my new email waiting on the server. Is there any workaround to fix it?

It is fixed from the time I signed in to the iCloud. (?) Can someone from Apple explain it?
Thanks to sanjayfromtoronto for his help!

Cannot copy information after updating to IOS5.0.1

After updating IOS5.0.1, I cannot copy some information(word) from some websites to memo.I have try to use another IPOD touch(without updating IOS5.0.1) to copy the words from such websites, it works. How can I overcome this problem?

I've seen that same issue on my iPhone. I still don't have a fix for it

My contacts disappeared several times after Updating To IOS7

Hi
After Updating to IOS7 , my contacts gone and came back several times.
Does any body have the same problem
any Idea or solution is highly appreciated.
Thanks
Kourosh

No one from Apple monitors the forum. Users of level 2 and up can report posts for violations of the terms of use.
Can you try syncing to google contacts again?
Do you mean that pix you took with the phone disappear after doing a sync?

Screen brightness not changing after update to windows 10

Hello, After updating to windows 10, I am no longer able to adjust the screen brightness at all. It is stuck on the brightest setting at all times; which is inconvenient when I am on battery power and need it dimmed. The f2 and f3 buttons are not working to adjust the brightness, and I am unable to change it in power/power plan settings. I attempted to search for a possible missing driver that I had maybe lost upon updating, but there are yet no drivers for my product on the HP website for this purpose. Any help on this matter is extremely appreciated, as it is rather frustrating that I can't change my screen brightness. Thanks.

How about using the snipping tool to create an image of what you do see and posting it here. The snipping tool is what I used to create the image that I posted. What version of Windows 10 is installed? I upgraded to Windows 10 Pro on the Omen 15 and have the Enterprise version on one of my desktop systems. I have not yet used the HOme or Education versions, so I do not yet know which features they lack.

6300 Contacts cannot be changed after update to fi...

Similar Messages

Maybe you are looking for