6300 firmware lost

Hi dont know if there is any thing to do about my problem.
This started about 3 days ago i was trying to install the new uppdate to my nokia 6300 (firmware) when it suddenly died. Well i thought
it should do that bequse it sad that it will that several min.
But after 4hours i had enough bequse it did not say any thing so i had to try it one more time.
But this time it did not start or even show any thing on the phone it was just blank.
So here is my question is there any thing i can do like type in *#0000# or something like that or do i have to send the phone away to get the firmware back.

All you can do now is take it to a nokia care point to be repaired.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Similar Messages

  • FAULTY 6300 Firmware V5.0

    5th August 2007. I have just updated my 6300 firmware to version 5.0.... the fristrating thing is that the DICTIONARY is no longer avalable (dissapear/lost) and the MUTE button(#) no longer functioning.
    Each and every Firmware revision should be better than the older ones and How in the world could NOKIA allow faulty firmwares to be distributed plus its worse than the already faulty version 4.7!!!
    I need to know whether if this is reversable or NOT. Is there any DOWNDATER to reinstall version 4.2!!!
    Can anyone (HOPEFULLY NOKIA PERSONEL) give me a solution!!!

    you cannot downgrade to a lower version, not even the personnel at nokia can do this AFAIK, because handsets simply get ruined when downgrading the version

  • What is new in Nokia 6300 firmware v07.00

    Hi I have just upgraded my Nokia 6300 to firmware v07.00. I can't notice any visible change with this new firmware. Can anyone put some light on what is new in Nokia 6300 firmware v07.00
    Hyp3rion

    After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
    i have reinstalled it three times... ..still no solution
    Message Edited by prubyholl on 04-Dec-2008 07:20 PM

  • Can't reinstall 6300 firmware

    Hello, my phone is rebooting about every minute (blank screen and again normal). I went to Nokia service and they reinstalled the phone's firmware and evertyhing was allright, but i played with a large mount of sms with this phone and this problem came again. Recently I have bought nokia DKE-2 cable. I want to reinstall the phone's firmware alone (without the nokia service) but I can't - "update failed". I think this is because my phone is restarting every ~minute and nokia software updater can't reinstall normaly, but i know that nokia service can it do easily
    My OS: Win XP Professional, SP 2. I tried with the newest PC suite, but i uninnstalled it because I had problems with connecting a cable. Then I downloaded only software updater, installed it and the driver(all that is needed). But in 5/6 Step i have message - that "Software update failed, try again".
    Ah one more thing: it's written that phone must have set "General profile", but every my phone's restart the phone profile is setting to silent..
    How can I easily reinstall the nokia's 6300 firmware?
    Thanx.
    Message Edited by neziniukas on 15-Dec-2007 11:14 AM

    It's not good, because It may happen again and i don't want to go to nokia's service with the same problem every time(they can look at me strangely I'm sending ~2-3k sms and when I shutdown the phone(to change to another sim card) the phone can't update SMS memory and restarts... As I result - I now have this problem. I want know what sms limit is in this phone and i want to find out it
    Message Edited by neziniukas on 15-Dec-2007 11:27 AM

  • Nokia 6300 firmware wishlist

    Hello!
    Let's give our suggestions for improving the Nokia 6300's firmware. Post feature requests, bugs and ergonomy issues.
    Contact list:
    * All the fields of a contact should be searchable (name, surname, phone number etc...)
    * The user should be able to hide groups in the contact list, as they are disturbing; in some cases, groups are only used to assign a specific ringtone to its contacts.
    * The change of a contact's name should reflect on the Call log and Inbox. Currently, the names displayed in the Inbox and Call log will remain the same, even after a contact's name has been changed in the contact list.

    1. when i try to play video clip (@176x144 resolution) on my nokia 6300 in full screen mode there are two white bars on the left & right side of the screen. Means the video doesn't fit to the screen. so please try to remove this problem on the next firmware update.
    2. please add brightness control in the next update.
    3. please add music player & radio themes.
    4. please add full screen web browser in the next update like nokia 5220.
    5. please add landscape mode and manual iso settings in the camera.
    6. remove maximum 1 mb jar size limitation.
    7. increase the video recording quality because its really poor & its a shame for a two mega pixel camera.
    8. increase the volume in the music player.
    9. add visualization in the music player.
    10. Add proxy address and proxy port in the access point settings for opera mini.

  • Nokia 6300 - firmware 6.60

    Dear,
    i have un mobile phone nokia 6300, i have update my firmawere from 5.50 to 6.00 but now i haven't italian language in my phone. it's possible find the firmware 6.60 with italian language?
    thanks
    bye

    If you got your phone from an operator then the chances are that it's a branded phone.
    Read this to find out what this means and what the implications are.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia 6300 Firmware update online

    hi chaps,
    I'm trying to use the "online" update of the firmware for the 6300. I have gprs connection working fine and can browse the web no problems. Every time I try to connect to the nokia download site using the "download updates" menu I get "cannot establish connection".
    Has anyone used this service ?
    How reliable is it ?

    I have upgraded my 6233 to 4.91 last year using the phone itself as dial-up connection. I exited PC Suite, connected the phone, dailed *99# and opened Nokia Software Updater.
    It did everything as it normally does (downloaded at 20kb/s over an EDGE connection) and then turned the phone off (internet connection closed) and flashed it - successfuly !.
    Everything worked like a dream. I know this is not FOTA since I needed a PC to do the flash, but it is the next closest thing ;-)

  • Nokia 6300 update lost cyrillic /bulgarian/ langua...

    hello, i have nokia 6300, and i update my phone from 4.70 to 5.0, and i lost my bulgarian language. my content is 270, prod. no 0537684. how i can have again bulgarian. thanks.

    Hi,
    Only way is to get your language back to go to the nearest authorized Nokia service.

  • New iPhone 3GS with 3.1.2 firmware lost connection and de-activate itself.

    I was facing a problem with my iPhone 3GS (with 3.1.2 firmware)that prompt for "Restore is needed" and then lost All Network connection (phone, wifi, bluetooth....). I reboot my phone and its stay on Un-activate condition, which only allow me to call emergency number (which i don't know).
    This already happen to me second times with a replacement phone by apple store. So I worry that i will have the same problem even Apple replace another new phone for me.
    Please help and let me know what actually happenning on the phone or this firmware.

    No, it's not a common problem. In fact, 3.1.2 contains a fix for this a similar problem which was a bug in 3.1.

  • 6300 Firmware?

    HI.
    Does anyone know if there is any new firmware for the 6300?
    I am on:
    V 04.20
    05/12/06
    RM-217
    The phone was purchased 20th March 07
    Is the the same firmware as other users?
    (Check your firmware via entering: *#0000# )
    \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ NOKIA 6300 ////////////////////////////////

    You can check it here :
    http://europe.nokia.com/A4305060
    Just type your phone's product code.(Ex.CODE: 0520001)
    CHeeRios!!!

  • N96 firmware lost functionalities

    Hello,
    I upgraded my N96 to 12.0.43 a couple of months back and since then all shortcuts have been lost (# for silent profile, 0 for web browser, etc...). Has anyone else experienced this? Anyone might know of another firmware in the pipeline? 
    Cheers,
    Steph
    Solved!
    Go to Solution.

    Yep thats a bug with the firmware. just wait for new version.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

  • 6300 im lost my security code

    plz help me
    Moderator's note: IMEI number removed. Avoid revealing the IMEI number of your phone as this is a unique identification number for your Nokia phone. It is best that these numbers are kept for personal viewing to prevent unwanted inconveniences.
    Message Edited by concordia on 22-Mar-2009 03:38 PM

    If you've lost your security code then your only option is to take the phone and proof that you are its owner along to your nearest Nokia Care Point.
    They will reset the security code to the default 12345 for you. Make sure you do a full backup first, though, because the operation may well entail resetting the phone entirely.
    Proof of ownership is required in order to demonstrate that you're not trying to have a stolen phone unlocked. You will need the invoice with the phone's IMEI number and your name printed on it, and photo ID.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • IPhone 3G with 2.1 firmware lost all music

    Hi,
    My details:
    Mac OSX 10.4.11
    iPhone 3G with 2.1 firmware
    iTunes 8.0 (35)
    Before anybody replies and says this has already been solved, I would like to say the following. I have searched forums and the internet for this. Many different sites recommend different ways to fix (some very complicated ways). However, it also seems clear that iTunes with firmware 2.1 fixed this problem. However, that is exactly what I have and yet it still happened to me. So, 1, I thought I would throw this out there that their fix did not actually fix it (at least for me) and 2, I was hoping for a once and for all clear (hopefully easy) way to fix this. And specific to this new version. Please read the exact sequence of events that lead to the problem.
    I just got the iPhone about 2 days ago. I plugged it into my mac for the first time today. I sync my contacts, calendar, Applications. I then copied a whole bunch of my music to the iPhone. Everything was working fine. While the iPhone was still plugged in (charging) I created my own ringtone out of an MP3 song I have by converting it to AAC. After renaming the file to .m4r so that iTunes would recognize it as a ring tone, I re-imported it into iTunes. All of a sudden, all the playlists under my iPhone in iTunes disappeared.
    I looked on the iPhone, and all the music is gone. In iTunes it still says that the space is used.
    Has anyone else had this on the 2.1 firmware?
    Does anybody know of an easy solution?
    Thanks.

    I've just had this happen with 2.2. My iphone has been upgraded for a few weeks now and things were so so. (as much as an iPhone can be I guess). I have used the ipod feature heaps, but went to play recently and my iPhone says no content yet out of 14.4 gig capacity I only have 4 gig left I can only assume something has screwed up..
    Now the dilemmas start, plugged in to itune and says cannot read iPhone. Please restore. So I tried and now Im getting the same bullhits error 9 I got when I upgraded. It took over 4hrs to get the upgrade to 2.2 firmware to work when it was released, looks like Im up for that again.

  • Updated 5230 firmware - lost Chinese language supp...

    Hi, 
    I live in China and bought a 5230 last week. 
    When I bought it the languages supported were English, Malay, and Chinese (both simplified & traditional)
    I updated the software/firmware yesterday using the Nokia Software Updater, and now the fonts, etc look much better than before...but the languages on the phone have changed to English, French, Portuguese and Arabic (I think its Arabic, but I can't understand what it says).
    Any Chinese Characters that were on my phone are now displayed as little boxes, and I can't type Chinese in an SMS.
    When I bought my phone, the shop told me the phone was from Hong Kong...but I dunno how true this is.
    How can I get Chinese language support back on my phone and keep the new user-friendly look and feel?
    Thanks!

    Sadly the shop you bought it from has sold you a modified import.  They import them from elsewhere then modify the firmware to include the regional languages.  This process also voids the warranty.
    When the phone is updated it rightly defaults back to the set of languages that it should have originally been installed on it.
    To get Chinese back on the phone you will either have to contact the retailer that sold it to you or a nokia care point.  You can find details of your nearest care point via the "contact us" link near the top of the page.  
    Any other unofficial ways of adding languages that you may read about on other forums cannot be discussed here. 
    Message Edited by psychomania on 19-Jan-2010 01:28 PM

  • Latest nokia 6300 firmware

    hi iv got a nokia 6300 im on v 5.50 is there a new one out and are there any major differences
    thnaks

    V6 is already available for several product codes, you can check if you want.
    Feel free to hit the KUDOS button if you think I deserved it.........

Maybe you are looking for

  • Can you use a php variable to filter a recordset?

    I've got a table of 'events', which have a description and more importantly for this a month ID number. (1-12 for the months of the year, when the event takes place) . I've used php's date function on a page to fund out numerically what month it is n

  • With the help of script i want to identify each and every thing in a indesign file

          i want to identify the each and every thing in a .indd file with help of script.and also i have to find totally how many farmes or things present in that file kindly guys help me out. and also suggest me some ideas. thanks in advance regards, s

  • Itunes symbol and usb cord  with an arrow showing the usb going up towards the symbol

    I don't know what happened.  When we moved I lost my Ipod cord so I bought a holder that would play and charge my ipod.  Now it is showing an itunes symbol the cd with the blue music note in front of it  iTunes written underneath it and a picture of

  • Deactivate "Legal Control" service

    Hello gurus, we would like to use the Sanctioned Party list Screening ONLY. Now, we had an export customer order that was blocked because of the Legal Control service. We checked the protocols and found out this was because of incomplete customizing

  • Seeing small top portion of taskbar in CS6 full screen mode

    I don't know what changed, but i just started seeing the very top portion of the taskbar in full screen mode. It is just a thin line that gives you access to the taskbar without minimizing CS6. I did not see this a few days ago. I am running Windows