6300 - how to stop autostart of music player on Bl...

Hi,
Since a few weeks I'm using a Nokia 6300. A few days ago a bought a Jabra BT8040. Pairing with two different phones is a bless, but ... the 6300 has a nasty habbit of automatically starting the music player and playing music thru the earpiece. I have a similar problem with my Parrot MK6100, but this is an ad-hoc problem.
Back to the Jabra: The device has been paired and set to connect without confirmation. Everything is fine. Now I disconnect by turning off the earpiece or by walking out of range from my phone. As soon as the Jabra autoconnects again, the pairing confirmation is displayed, the message disappearsand the date and time starts showing up. So far so good, but now the songtitle that the music player starts is shown above the date and the music can be heared from the earpiece.
I've tried almost everything and read the complete manual and FAQ's to stop the autostart of the musicplayer, but I can't find the answer to my problem and any attempt so far has been futile.
Who's is smart enough to come up with the correct answer?
Thanks in advance!!!
Message Edited by jevis on 29-Jul-2008 09:24 PM

To solve the problem using BT8040, you need to pair it in the special music pairing mode. It can be found the BT8040 manual, under troubleshooting and faq.
Below is the excerpt:
The music player starts playing when connecting to the
headset.Some phones may start the music player once it connects to the headset. Re-pair your headset to the device in order to avoid this behaviour.
1. Make sure the headset is off
2. Press and hold the answer / end button for approx 5 sec until the light turns solid blue
3. Continue press and hold the answer / end button until the solid blue light turns off
4. Continue press and hold until a solid purple light turns on
Go through the regular steps in paring the headset to a Bluetooth device.
Message Edited by spherical on 26-Dec-2008 06:22 PM
Message Edited by spherical on 26-Dec-2008 06:24 PM

Similar Messages

  • How to turn off the music player on 4s

    Hi Everyone, need your help with the Music player on 4s - I haven't been using iMusic until now, always just streaming music from Grooveshark or radio apps. A few days ago I downloaded one song from the iStore and now this happens - when I connect my iPhone to the Media system in my car, with Bluetooth, the music player takes control and all I can hear is this one song I have on the my iPhone. Whenever I try to switch to another music app (streaming radio), it plays for 2 secs and then player comes back. I can't turn that off. If I hit the pause button on the phone, it simply goes to mute and when I adjust the volume back, I get the same song again. How do I disable this music player? I don't know if it's the iPhone or the car system thing, but I couldn't find any option to stop the player from being the default.
    If anybody had the same problem, please advise.
    Thank you

    To close the Music App double-click the Home button and swipe up on the screen image of Music (in iOS 7).

  • T2 ultra Dual sensors stops working. Music player gets freez

    Since upgrading to lollipop. I am facing these problems. All my phone sensors stops responding....Accelerometer,proximity,Auto rotate..... but after restarting my phone they start working... But again after 3 4 hours they again stops working. Also the music player gets freezed in betwwen of a song for like 15 sec and again start the playback. I have done repairing 2 times through Sony bridge. Formatted my phone 3 times. But this problem is not going away. I am never ever going to purchase a Sony phone again in my life. Once I was a Sony admirer... Why did you do this to me.

    Contact Sony Xperia Support.
    http://support.sonymobile.com/global-en/contactUs/

  • How can I close the music player?

    Good morning,
         I just bought an iPod nano 6G, and this is my firs Apple product.
         Anyway, there is something that is bottering me. I use the iPod as a watch, and sometimes I use as music player. After I'm done listening to music and want to use the iPod JUST as a watch, when I press the Wake button, to visualize the hours, it shows the music player. And there is this 'pause' icon in the top bar.
         Isn't there a way to close this player???
              Thank you!

    It might help to also put the iPod to sleep from a screen other than the Now Playing screen when listening to music.
    As I said already above...
    Again, others have synced their iPod with iTunes after making sure this setting was On and it worked from there.  Is your Nano running the 1.2 firmware?
    B-rock

  • How to set song from music player as ringtone

    Hi,
    I want to a song from my music Player as a ringtone, please advice
    Bhushan

    Songs and ringtones have different formats.  They are not interchangeable.  You would have to convert a song into a ringtone.
    If you have a Mac, you could use the GarageBand app to do that.  If you have a PC, there are apps to do the conversion, but I cannot name one.

  • Unlimited music stops after updating music player

    i have updated my music player to version 11.4. after that i am unable to download unlimited music from ovi music on my nokia X6 plz help.

    Is it giving you any prompts??
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • How To Set The Nokia Music Player Media Equaliser?...

    Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...

    14-Oct-2008 09:36 AM
    icu44 wrote:
    Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...
    Hi,
    Go to Media> Equaliser and set your desired settings
    You could also enable the stereo widening effect to widen sound effects.
    =)

  • How to turn the Radio/Music player off?

    How do I turn the radio off?  If I go back to the main page the radio still shows at the top of the page.
    I have a Nokia Lumia 800.
    Thanks
    Solved!
    Go to Solution.

    Hi
    If you mean the lock screen then to remove this just do a few quicks taps the lock screen button and this will remove the play and pause button from the lock screen. Or alternatively you could try the following application:
    http://www.windowsphone.com/en-us/store/app/stop-the-music/0899997d-c25a-4075-9b28-685308e1568b
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • How to stop automatic start music on ipad mini

    While watching TV app (as  an Idevice) on Ipad mini the music automatically start playing. Very annoying. How do I get this to stop

    Hi samimhameedi,
    If you are having issues with your iPhone's music starting to play when the Video application is running, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • How to Run Windows Xbox music player using autoit

    Hi,
    I am doing some automation on windows.I wanted to play AV file in windows 8/8.1 default xbox player through automation.
    I did not find the xbox player exe or so. I am using autoit for automation. Is it possible to run video on xbox player using autoit?
    or any other simple way how i can run av in xbox player using automation

    Hi,
    Hi,
    As the issue is specific with Xbox player , you may contact Microsoft Xbox Player Forum for further assistance on the issue:
    Contact - Xbox Player Forum: http://www.xbox.com/en-US/forums
    Please revert for any clarification on this or any Windows issue. We will be glad to help you.
    Roger Lu
    TechNet Community Support

  • How can you add a music player a LR3 web gallery?

    I feel like this would be a highly desirable feature and assumed Adobe would add it to Lightroom 3. That doesnt seem to be the case. Does anyone know an easy work around for adding music to your Lightroom web galleries? Dewplayer http://www.alsacreations.fr/dewplayer-en.html seems to have a open source mp3 player with a code generator. I assume i can use that and then cut and past the code into one of the lightroom gallery files. Where do i paste it? I am using lighroom's simpleviewer web gallery.
    -s

    I've tried dragging the html snippet into a blank pag
    iWeb ( +previous to iWeb 08+ ) has no HTML Snippet.
    but there is allot missing including the interactive buttons, and graphics.
    Check the pathnames.
    [Using the iWeb HTML Snippet|http://www.wyodor.net/blog/archives/2009/07/entry_213.html]

  • Anybody know how to stop front row music from spinning during playback??

    I find this highly annoying!!

    I assume you mean the cover art that flips back and forth while music plays. There are no configurable options within FrontRow to control this. Playing your songs in iTunes would be a workaround, and you could control your songs with the Remote app on your iOS device.
    Otherwise, you can submit a feature request to Apple to add this as a setting:
    http://www.apple.com/feedback/macosx.html

  • How to create a looping music player that does not restart when you go to other pages

    Hello
    I am new to web design. I apologize if I do not use the write
    terminology. I am designing a website. I want to have a song that
    loops continuously throughout the site and does not restart when
    you click on the different pages. I have included a link to a site
    that I found that does what I want to do. (Hopefully this link will
    give you a better idea of what I am trying to describe)
    http://www.marcuscoleministries.com/index2.html
    Thanks for your time and consideration

    You will have to use frames which in itself is a bad idea.
    IMO music that
    plays automatically is a terrible idea. It is likely to drive
    away many
    visitors and is unlikely to retain even a single visitor.
    Avoid frames. Drop the music. You'll be happy you did.
    Walt
    "dbone1" <[email protected]> wrote in
    message
    news:fn36v6$de7$[email protected]..
    > Hello
    >
    > I am new to web design. I apologize if I do not use the
    write terminology.
    > I
    > am designing a website. I want to have a song that loops
    continuously
    > throughout the site and does not restart when you click
    on the different
    > pages.
    > I have included a link to a site that I found that does
    what I want to do.
    > (Hopefully this link will give you a better idea of what
    I am trying to
    > describe)
    http://www.marcuscoleministries.com/index2.html
    >
    > Thanks for your time and consideration
    >
    >

  • IOS Music Player MP3 Gapless Playback Problem

    Hi,
    I've been having this gapless playback issue on iOS now for the past few years, since at least iOS 6 if I can remember correctly. The number one reason I use an iPhone and iOS devices is for gapless playback in the iOS music player. For the last few years I've  been experiencing a bug with the stock iOS music player on my iPhone 4S using iOS 6 and on my iPhone 5 using iOS 6 & 7, and currently on my new iPhone 6 running iOS 8.1.2. This only happens on my iPhones and using iOS, this bug is not found when I use my iPod classic or when playing the same albums through iTunes.
    I thought it might have been spotted by other iOS users and fixed in iOS 7.1 or at least the current version of iOS 8, but instead it's gotten worse, albums that used to play smoothly between transitions now suddenly pause and jump for a split second when changing from track to track.
    What's happening is, I listen to a lot of albums that are continuously DJ mixed and play straight through without any pauses between tracks, and I've been experiencing problems a lot now with random split second pauses between tracks and choppy transitions. These albums in question have been ripped from cd using the latest versions of iTunes.
    For example,
    I'd be listening to an album and it would play gapless and smooth for most of the album, but maybe one or two transitions on the album would have a split second pause between them, and the rest of the album would play perfectly with no pauses, skips or jumps at all.
    This only happens on my iPhone, as I have a 160gb iPod classic and I've listened to all the same albums on it and never has a problem playing the album without any pauses, every album plays 100% smooth and gapless on it.
    I mailed Apple about it through their feedback page on their site... https://www.apple.com/feedback/iphone.html
    Hoping that they would take note of this and try and look into it and fix the issue. That was probably about a year ago now, never got fixed or got any confirmation back from them about this problem. Then last August, I'd had enough and contacted Apple support to notify them about this issue. They told me the usual story, "have you tried restoring the phone?", which I obliged and did. The problem was there on a freshly restored iPhone 5.
    So they told me that they would put me in touch with someone higher in Apple to take the case further, "great" I thought.
    I spoke with a senior care advisor and explained the problem and agreed to send detailed explanations of the issue and test files too so that they could hopefully hear what I was talking about. But after a few weeks of going back and forward, I finally got them to hear the issue with the random pauses, the first week they denied there was a problem and said the files played ok on their test iOS devices, so I myself tried the files on another iOS device and the same problem was there.
    The last correspondence I had with the Apple care advisor was back in the end of August / start of  September, and she told me that they spotted the issue and was told by the tech's that it would be fixed in a future update, I never got a when this would happen, I was just told to make sure my iOS device was up to date with the latest version of iOS. I couldn't speak to an actual technician, got no follow up support, just a vague "We'll look into it." Case Closed.
    I got so sick of this problem that I sold my iPhone and iPad just after this last phone call with the Apple people, and switched over to Android. I'd being reading up on gapless playback music players and found out that there's a good few available for Android devices. I got myself a Sony Xperia Z3 Compact, twice as powerful as the iPhone 6 and half the price. I was using that for the last few months, and playing my music through Neutron Music Player app which is a great music player which plays gapless 100%
    But I couldn't really take to Android OS, seeing as I've been using Apple products for around 10 years now and iOS since the iPhone 3G. So I decided to contact Apple again and see if they'd fixed the music player issue in iOS yet.
    I wrote a long email explaining the problem, how it wasn't really looked at properly, and how I was a long time Apple customer and had to resort to switching over to Android because the basic music player functions on iOS devices have bugs. I took a chance in mailing this to Tim Cook's offices, I knew he wouldn't reply personally, just thought that it might get read by someone in his offices with a bit more say in the matter.
    Just before Xmas, I got a call from someone from executive relations from my local Apple offices about this. He seemed nice and was aware of the problem from reading back through my emails and previous case notes from August when I opened this case originally.
    We had a talk and he said he would get one of the tech's to call me too about this so that I could explain the bugs to someone more knowledgeable about iOS.
    A few days later I received a call from one of the tech's at Apple and was chatting to him, explaining the problem. His response was that he thinks Apple doesn't support gapless playback on current iOS devices. From looking at the gapless playback information page on the Apple support site below, it looks like it hasn't been updated to show any iPhone models after the iPhone 3GS... http://support.apple.com/en-ie/HT201644
    I was trying to explain to him how ridiculous this sounded, why would Apple stop supporting basic functions on their music player on iOS devices? It makes no sense at all? You can see that the amount of hardware devices and software that supports gapless playback today... http://en.wikipedia.org/wiki/Gapless_playback#Player_support
    He couldn't explain either, he just said that because it's not listed there on the Apple support page.
    Then the next day I got the follow up call from the Apple executive relations guy, he was stating that he was speaking to the tech guy that called me and it looks like Apple doesn't support gapless playback anymore, from looking at the documentation on site.
    I told him how stupid this was, and how lots of music players have gapless playback as standard today. And if they don't support it now, then why does it play through some parts of the albums on iOS ok and then just randomly pause, or have jumpy / choppy transitions on the rest of the album. If it was the case, no albums would play gaplessly at all, it would be like when the first ever iPod's were released back in the day with no gapless playback and would pause for a split second between every transition.
    He couldn't give me an answer and said that maybe down the line they would start supporting it again, and that I should request the feature to be added to future iOS versions via the iPhone feedback page... https://www.apple.com/feedback/iphone.html
    He just kept on emphasising that it was "NOT A BUG OR ISSUE", trying to cover up the problem because the info on the site wasn't updated to show the current iOS devices. Which in itself is wrong, looking at the page it says "Supported iPod and iPhone models (make sure you have the latest iPod or iPhone software)"
    iPhone, iPhone 3G, iPhone 3GS only go up to iOS 6, so that contradicts itself when the latest version is iOS 8.
    The info is out of date and needs to be updated. So in August I was told, "we found the issue and will look into it" and a few months later, "it's not an issue", what's a cop out.
    I was annoyed and taken back by this response, and really found it hard to believe that this was the case, Apple stopping supporting their music player on iOS devices. Seeing as iTunes plays everything smoothly and no gapless issues. I just went out and bought an iPhone 6 for €900 / $1060, and for that money you'd expect it's basic music player to work. It's total BS to think that a top computer software / hardware company would just decide to abandon basic functions in their devices, especially when we are talking about how much Apple takes pride in their products and how much more they charge for them over their competitors.
    So this is my next step to try and get this problem seen and out in the open more. The more people who know about it and are aware of the issue, the better.
    Hopefully more people can get the word around and get this noticed by Apple and finally fixed.
    I've uploaded some test files below to show the problem. The files are mp3's and aac, and have been ripped from cd using the latest version of iTunes. The mp3's are the ones with the issue, but the aac play with no problem. If you listen to the transition at the end of track 2 (2-02 Colours (JH Re-Edit)) going into the start of track 3 (2-03 Your Body), you will notice the split second pause / jump. But listen to the aac version and compare it to the mp3 version and you will hear that it plays back fine, just as it's supposed to. Try them in iTunes too and both versions playback fine, no jumps or pauses.
    You can download them here, all links have the same files, I just uploaded them to different hosts for other people's choosing...
    http://s000.tinyupload.com/index.php?file_id=86512332626247919914
    https://www.mediafire.com/?w5wvi50er96b14s
    http://www42.zippyshare.com/v/37047710/file.html
    https://www.sendspace.com/file/lubcmc
    More files can be provided if needed to show the problem happening on various other albums.
    I really hope that people can spot this issue too and help get this fixed, I know this gapless playback feature might not be important to some people, but like I said at the start, it's an essential function for me in a music player and I use it on a daily basis when I listen to music.
    Thanks for reading this long rant of mine, appreciate it.
    Ger

    I believe this issue occurs only between songs that iTunes has converted to a lower bitrate for you during transfer to your iOS device and songs that it has not done this for. Take this Between the Buried and Me album, for instance. I have marked all of the transitions that should have been gapless but probably aren't in red. I know for sure that most of these marked transitions are indeed broken and that the most of the transitions not marked in red work flawlessly... I honestly can't remember whether or not some of these transitions were gapless or not, but the many transitions I do remember working or not working match up exactly with whether or not the songs on either side of the transition were also on other sides of the 256kbps threshold, the threshold at which I enabled iTunes to convert tracks to 256kbps AAC.
    I'm going to try re-sync'ing my library with that "feature" disabled and see if it fixes my gapless playback problem. Will post the results once I test it out.

  • HT1203 how do I share some music on same itunes account without changing music using same itunes account, but two different ipod touches

    I need to know how to stop losing / adding music I like/ dont like to my and my brothers ipod.  I gave him my older ipod(2nd Gen) with music on it already. I bought a ipod (3rd Gen) also. Both devices are registered to me; but I gave my brother the older one.  Now when either of us add / delete music it affects both ipods when either one on us sync.  We use the same computor(windiws7), he uses his own account on the computor, butit accesses the same itune/ library.  How can we split the itunes music between the two ipods?

    Hi gail,
    Thanks for the quick reply! The music part makes sense, good to know I don't have to duplicate the lot. The big question stillr emains as to whether iTunes can cope with two different iPhones, running different versions of the iOS, and therefore different app versions.
    Currently all the apps in iTunes are years old, and many haven't updated in months (years?) because the 3G is running iOS 4.2.1 (and can't be upgraded). Many of these have since been updated in the iTunes store (for the various incarnations of iPhone since) and the old versions that my 3G requires have been replaced.
    I'm worried that syncing the 4S running iOS 5, and running the most recent updates for same apps, will cause iTunes to overwrite the old 3G compatible ones when I sync. Unless iTunes is smart enough to know which version of the app is for which OS, without updating the legacy version when I update the apps on the 4S?
    You guys shouldn't face that problem, as iPad and iPhone apps don't replace each other (I believe? Not sure about this) as new updates are released for each app, you'd have a copy for each device (for example Evernote for iPad, and Evernote for iPhone). I can't figure out if iTunes can handle keeping separate iPhone versions for Evernote iOS 4.2.1 and Evernote for iOS 5. My gut feeling is no, but I want to amke sure before I lose the legacy versions of each app.
    Of course, maybe I'm just paranoid and iTunes is in fact perfectly capable of keeping old and new apps in the same library?
    Cheers

Maybe you are looking for

  • Post Migration from SP2010 -Attach File Button not working in any list new/edit forms

    Hi, We have migrated the SharePoint 2010 farm to Sharepoint 2013 on last saturday and we are noticing an interesting issue after the migration . On any custom list on any web application ,When we create a new item,if we click on attach file button in

  • Problem using myfaces on webLogic

    I run into the problem using myfaces on webLogic 9.1. That is... a managedBean's instance is created twice in one page. That page is consisted with one <h:inputText> and <h:commandButton>. After some tests, we found out that the problems happens in a

  • Weird video message

    I recorded a video on my iPhone 4 but when I tried to replay it it displayed the message "This video format is not supported". What should I do.

  • IPhone4 Contacts not being synced to MobileMe

    This is odd. I have found any contacts created on my iPhone4 are not being synced to MobileMe and also any of my Macs. Which means I do not see them on the web contacts in MobileMe or on my Macs. But they do show up on my iPad.!! The ones that are be

  • Weblogic workshop test browser script error

    Hi all whenever i run any portal sample through Workshop Test Browser ,i get following error. a dialogue window "Internet Explorer script error" with following texts An error has occured in the script on this page Do you want to continue running scri