6300 - Profiles not displayed when wall-paper is t...

When the wallpaper is turned off, none of the activated profiles (like silent, meeting etc.) do not appear on the screen. They all appear if the wall-paper is activated.
Does anyone know how to fix this ?
Thanks.

Cocoa is not open source.

Similar Messages

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Adobe PDF files will not display when called via a link in page (FF 4.01)

adobe PDF files will not display when called via a link in page.
This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)

[moved to the Adobe Reader (desktop) forum]

My edited photos will not display when clicked on, a large triangle with exclmation comes up

my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign.

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Included subview not displaying when run, only in editor

Hallo -- I have a page called home.jsp that contains a subview.
home.jsp looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ page language="java" contentType="text/html; charset=iso-8859-1" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<h:panelGrid width="100%" columns="1">
     <h:panelGroup>
          <h:outputText value="Hello?"/>
     </h:panelGroup>
     <h:panelGroup>
          <h:panelGrid width="100%" columns="2">
               <h:panelGroup>
                    <f:subview id="navigationPane">
                         <jsp:include page="subview/navigationPane.jspf" flush="true" />
                    </f:subview>
               </h:panelGroup>
               <h:panelGroup>
                    <h:outputText value="Hello-o-o-o...?"/>
               </h:panelGroup>
          </h:panelGrid>
     </h:panelGroup>
     <h:panelGroup>
          <h:outputText value="Where's my subview?"/>
     </h:panelGroup>
</h:panelGrid>
</body>
</html>
</f:view>
[/code:1:ccbd93ceb2]
And the file in the subview, named [b:ccbd93ceb2]navigationPane.jspf[/b:ccbd93ceb2] in the subfolder [b:ccbd93ceb2]/subview[/b:ccbd93ceb2] looks like this:
[code:1:ccbd93ceb2]<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<h:panelGrid width="20%" columns="1" id="navigationPane">
     <f:facet name="header">
          <h:outputText value="Navigation Pane"/>
     </f:facet>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoHome" action="gotoHome" immediate="true" style="text-align: center">
                    <h:outputText value="home"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByCustomer" action="viewByCustomer" immediate="true" style="text-align: center">
                    <h:outputText value="view by customer"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="viewByJob" action="viewByJob" immediate="true" style="text-align: center">
                    <h:outputText value="view by job"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form id="quickSearchBeanForm">
               <h:panelGrid columns="3">
                    <h:outputText value="Search By Option:"/>
                    <h:panelGroup>
                         <h:selectOneMenu id="quickSearchBean_searchByOption" value="#{navigationPaneBean.quickSearchBean.searchByOption}">
                              <f:selectItems value="#{navigationPaneBean.quickSearchBean.searchByOptions}"/>
                         </h:selectOneMenu>
                    </h:panelGroup>
                    <h:message for="quickSearchBean_searchByOption"/>
                    <h:outputText value="Search For:"/>
                    <h:inputText id="quickSearchBean_searchFor" value="#{navigationPaneBean.quickSearchBean.searchFor}"/>
                    <h:message for="quickSearchBean_searchFor"/>
               </h:panelGrid>
          </h:form>
     </h:panelGroup>
     <h:panelGroup>
          <h:form>
               <h:commandLink id="gotoAdmin" action="gotoAdmin" immediate="true" style="text-align: center">
                    <h:outputText value="admin"/>
               </h:commandLink>
          </h:form>
     </h:panelGroup>
     <f:facet name="footer">
          <h:form>
               <h:commandLink id="logout" action="logout" immediate="true" style="text-align: right">
                    <h:outputText value="logout" style="text-align: right"/>
               </h:commandLink>
          </h:form>
     </f:facet>
</h:panelGrid>
[/code:1:ccbd93ceb2]
Just to be really clear, here is the dierctory structure for the relevant files:
[code:1:ccbd93ceb2]/web
|
|
|--/pages
|   |
|   |
|   |--/app
|   |   |
|   |   |
|   |   |--/subview
|   |   |   |
|   |   |   |--navigationPane.jspf
|   |   |
|   |   |
|   |   |--home.jsp
|   |
|   |
|   ...
|
...[/code:1:ccbd93ceb2]
My problem is that the subview will not display when I run the web app. In the design view I can see it just fine, but when I browse to home.jsp when running, all I get is this (from view source):
[code:1:ccbd93ceb2]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<table width="100%"><tbody><tr><td>Hello?</td></tr>
<tr><td><table width="100%"><tbody><tr><td></td><td>Hello-o-o-o...?</td></tr>
</tbody></table></td></tr>
<tr><td>Where's my subview?</td></tr>
</tbody></table>
</body>
</html>
<script type="text/javascript">

</script>
[/code:1:ccbd93ceb2]
Does anyone have any idea why this might not be working?
I'm really stumped!
Cheers,
   doug.

http://forum.java.sun.com/thread.jspa?messageID=3413354&#3413354

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

After Mozilla upgraded (5 I think) my igoogle homepage does not display when I sign in.

I upgraded to Mozilla 5, (I think, as there does not seem to be any previous versions when I check), now my personalized igoogle homepage does not display when I sign in. I need to go to options then select igoogle. All was well before. How do I reset without having to completely redo my igoogle page. I do not believe I have the 6.0 version as that is what it says I can upgrade to. I am retired and am only learning.

Unless you have a version of iPhoto that was 9.0 or later you will not be able to download iPhoto 9.6.1 from the App Store. To get 9.6.1 you'll need to purchase a copy of the iLife 11 disk from an online retailer like Amazon.com and then go the App Store and download 9.6.1. Those who had an iPhoto 9.0 or later already installed have been able to get 9.6.1. But there's been no reports from anyone who bought iLife 11 and went that route so you're at your own risk.

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Sharepoints not displayed when connecting via FTP

Hi All,
Leopard Server 10.5.8 xserve 2 G5
I have an issue with the built in FTP server.
All my share point are set to be shared via FTP, yet they are not displayed when users log in and access the server via FTP.
In Server Admin, Authenticated users see: FTP Root and Share Points.
All relevant users have access to the FTP service, in the server settings.
ACL permissions have been set correctly for those users.
This is *sudo sharing -l* tells me, for all share points.
name: Archive
path: /Volumes/External RAID/Archive
afp: {
ftp: {
name: Archive
shared: 1
guest access: 0
smb: {
Is there anything that I missed?
Thanks for you help,
Johan
Message was edited by: JohanDouma

Hi,
Sorry for the late respons.
My config:
1 mac mini with OSX Server leopard
1 airport extreem
1 external HDD LaCie
An airport Extreme has the posibility to share a network drive. So I plugged in my HDD into the airport extreme and configured the thing.
Than I turned to the mac mini. And started configuring my sharepoints.
So one of my sharepoints is the external HDD.
There are several directories on there that I want to make available thru the legacy protocol FTP.
So by just making these sharepoints available thru FTP i expected for these sharepoint to show up in mij directories if I connect to my external IP with a FTP client like CyberDuck.
(portforwarding and everything is not the problem, because I can make a connections and all directories show up as browseable.
But the sharepoint I made on the network drive just show up as an bin or another kind off file I can't open.
Everything else is browsable..
They show up by the way in the root dir of the FTP Server as regular symbolic links.
Thru Finder I can browse them and do everything. But as soon as i connect over the internet, lan or whatever, these symbolic links are not the access point towards the directory underneath.
They show up with the correct name just not as an dir I can open.
Hope this helps
Grtz and thnx
(typed on an iPad and not fully used to it)

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Field should not display when it is null

Hi,
I am creating a xml report,I dont want to display row when its value is 0.
eg column1 column2 column3 column4 column4
1 ABC BCA 0 0 0
2 XYZ YXZ 0 1 0
So if 1 is not having any value then that row should not display,it should dispaly only row with values as in 2.
Thanks in Advance....

Instead of <?for-each:G_CF_SUB_SEG_VALUE?>
use
<?for-each:G_CF_SUB_SEG_VALUE[TOTAL_CUST_AMT!=0 or TOTAL_CUST_B0!=0 or TOTAL_CUST_B2!=0 or TOTAL_CUST_B3!=0 or TOTAL_CUST_B4!=0 or TOTAL_CUST_B5!=0 or TOTAL_CUST_B6!=0]?>

Content does not display when page first opened

Hi All;
I have a contenta are/region which I have divided into multiple tabbed areas. I have two main tabs that divide the content into two major topics. Within each of these main areas I have added 4 to five tabs. One set for example holds a calendar, another tab a news release area and a third a content area for holding multiple folders of a department's documentation. The problem I am encountering is that when I first bring up the page all I see are the tabs and no matter what tab area is exposed the content within it is not displayed. For example, I start with the Calendar tab active (the calendar does not display). I then click on to say the document area, which displays all of its content's correctly. When I return to the calendar tab the calendar is displayed. My question... how can I ensure that the calendar (or any other tabbed area's content is displayed when the user first brings up the page?
PS. This is a hot topic since I will be demoing my pages to my managers next week in an effort to convince them that Oracle Portal is the way to go.

When I email the page to our server, the href links are missing.
You email the page to the server? What does that mean?
MaureenHayslett wrote:
I am using CS3 on Mac OS 10.6. The page previews perfectly in Safari. When I email the page to our server, the href links are missing. For example, the banner doesn't use the correct font, and the background color the the whole page is missing. Please go to http://www.crhcarchives.org/links.html
All of the other pages on the website look correct. Thank you.
Look at the source on that page. There is virtually no styling on it....
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css">

</style>
</head>
There is nothing telling the page which fonts to use, or which colors to use. Are you sure you have uploaded the correct page?

Images not displaying when open in Dreamweaver

Hi, my images on the page
oldfortestates.com/about_st.vincent.htm do not display properly
when open in DW however they do on the server when opened with a
browser. They are stored in the images folder in the site root. I
have this problem with all my pages...

Going back to my original comment, if you change the name
http://oldfortestates.com/images/table_bck1.JPG
(File Not Found)
to
http://oldfortestates.com/images/table_bck1.jpg
the image is there.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just make a new page.
If it were me, yes, I would start over.
>Is there a quick way for me to just create an exact copy
of my pages in a
>template page where I can after just copy and paste all
the different page
>infos into.
I am far from being the best person to give advice, I would
steer clear of
javascript menus for a start - they don't work with
javascript turned off.
There are many good ones recommended here,
www.projectseven.com and others
Start with a clean page and investigate Server Side Includes
with a good
menu (see many recommendations here) or, as you suggest (you
don't have many
pages), a template.
Make sure you save the template File > Save As Template.
>then rename the individual pages
No, create child pages from the template, giving them names.
I wouldn't
rename anything you already have, the code is... bad.
Check out your validation errors to make sure you don't
repeat your
mistakes.
You'd be wise to look at
http://www.w3schools.com/ for
HTML and CSS.
As I said, I'm not the best person to help but hope this does
a bit.
Jo
"atomic king" <[email protected]> wrote in
message
news:gjoqqr$nk5$[email protected]..
> Thanks so much Joise1 I will try to see if I can get
that image to work.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just
> make a new page. Is there a quick way for me to just
create an exact copy
> of my
> pages in a template page where I can after just copy and
paste all the
> different page infos into and then rename the individual
pages. What do
> you
> think?
>

6300 - Profiles not displayed when wall-paper is t...

Similar Messages

Maybe you are looking for