6300 will not Pair to BH210

Bought the BH210 Bluetooth headset but when I try to pair it to the phone it is not found in the device list.
I had the same problem with my O2 Blue Bluetooth headset as it was not found either in the device list.
Anybody any clues??
A

If I remember right, BH-210 only has one green led which then indicates all the headset modes. First make sure that the headset is switched off. Then swith it on and to pairable mode by keeping the multifunction button pressed for some time (like 5 seconds). Note that the headset will be powered on if you press the button for a shorter time and this is indicated by slow blinking of the led. In pairable mode, the blinking is noticeably faster. Reading the manual usually helps as well

Similar Messages

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • 10.6 client will not 'Pair' to 10.5.8 Xserve

    I am running Mac OS X Server 10.5.8 on an Xserve (intel).
    I have setup a brand new user who is running as a Mac OS X 10.6.4 client (new Mac)
    Under the users account settings on the Mac (System Preferences > Accounts), the 'server account' option appears but will not accept the password / will not 'Pair'.
    I have tried the following on the Xserve:
    Delete user
    Change user password
    Check user services
    I have tried the following on the User's Mac:
    server user short name
    server user full name
    retyped password
    upper and lowercase
    The user can connect to the Xserve's shares with no problem in the Finder using the given username and password (the same as their Mac user account), however I would also like them to be able to use the Open Directory services on the server (initially Time Machine).
    Nothing seems to be working. Is this a problem on the Xserve. Is there a trick to make it work?
    I would like to get this working soon as the user is now falling short of their Time Machine backups!

    We have this working without any problems (on a LAN with one subnet). Try add a new account on another machine for that user and log on from there. Also try the converse - add an account that you know works on the client machine that will not connect.

  • Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any solutions?

    Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any suggestions please?

    Yes, it did.  I have not had any problem with my iPad pairing, just the iPhone.  Thank you
    Pam

  • Bluetooth will not pair with Moto Droid4

    My Droid4 has will not pair with either my "Verzion" Jabra VBT-4050 nor my Jawbone Icon.  Both these earpieces paired with this phone before, but will not now.
    Makes no sense to me.
    Thanks...Andy

        westa510b,
    That can certainly be confusing since it previously paired just fine with your device. We will be happy to take a closer look at this matter with you. Have you attempted to reboot the device? Tried deleting the bluetooth connection from the device, then re-establishing connection? Any changes recently to the devices software or additions of an application when you first noticed this issue began?
    EfrainM_VZW
    Follow us on twitter @VZWSupport

  • Macbook pro will not pair with Vizio sound bar.

    Macbook will not pair with Vizio sound bar. It has paired and worked fine in the past. in the menu bar at the top of the screen it says it is connected but it is not. when I open the bluetooth preferences and try to pair it says pairing failed. any help would be great. thanks.

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • HT204368 bluetooth stopped working and now will not pair with any of my devices ?

    bluetooth stoped working and now will not pair with any of my devices? any suggestions?

    Hello, oscar302. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you may find helpful with this issue.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    Jason H.

  • My Droid2 Global will not pair to My Ford SYNC since the latest software update.  Please help!

    Since the latest update, my Droid2 will not pair to my Ford SYNC.  The phone will not find SYNC for me to place in the PIN.  It use to work wonderful before the latest update.  
    I can not drive and talk on my phone without SYNC.  Corporate Car- Corporate Policy.
    Thanks for your help.

    Hello rosalee2340,
    Thank you for sharing your concern as I am more than happy to assist you! Are you able to successfully pair your Droid 2 with another bluetooth device, like an earpiece or a computer? This will help us determine if there is an issue with the bluetooth technology after the software update or is it a compatibility issue. Also, what year and model vehicle do you have? In order to successfully pair with the vehicle, the Droid 2 must be in discovery mode. Below is a link to walk thru placing the Droid 2 into discovery mode.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=34745
    Once the phone is in discovery mode, the next step would be to attempt to pair with SYNC again. Here is a video link with the steps on how to pair a phone with SYNC.
    http://syncsupport.ford.com/servlet/technology/connect-phone-sync
    If the pairing is unsuccessful then you can contact the dealership for assistance with the pairing process and/or for an updated device compatibility list of phone. Let me know how the steps above works out for you.
    Thank you...

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • Apple Watch Will Not Pair - "Device Locked" Warning

    My iPhone 5S has had terrible battery life over the last few days and I am trying to troubleshoot what if the issue is the Apple Watch. In order to check, I tried un-pairing the Apple Watch from my phone so I could re-pair the watch and see if it helped. It is important to note that I have an Exchange account which requires a complex passcode. This situation required me to use the "Unlock with iPhone" feature and not a four digit simple passcode.
    Now my phone will not pair with the watch and the watch will not unlock via the phone. I am stuck on the "Device Locked - First put on your Apple Watch, then unlock your iPhone" screen any time I try to do anything.
    Has anyone been able to resolve this issue?

    I had a similar problem (also with work-forced unlock phone to unlock watch). I did a restore of my watch and it seems to be working since (and I was not required to do anything re: the passcode).
    Also, make sure you turn off the "Mirror iPhone" setting for Airplane Mode - so far as I can tell, if you go into Airplane Mode on the watch, you'll never be able to unlock it again without a restore since Bluetooth will be disabled so you can't unlock the watch by unlocking the phone.

  • My iPhone 6 plus will not pair with my macbook air 2014

    My iPhone 6 plus gives a message unsuccessful not supported when I try and pair with my macbook air.
    both are running up to date iOS and OS X.

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • My blue tooth will not pair with windows 8.1

    hp envy m6 notebook pc  having problems with my bluetooth will not pair with speaker after up graded to 8.1 ,and my simplepass dosent work eather.

    Hello, jpalazzi
    Welcome to the HP Forums.
    I see that after upgrading to 8.1, your having a few issues with the notebook. I will try to assist you with this.
    If you haven't you may need to update the drivers.
    You can also try these documents:
    Using HP SimplePass Fingerprint Reader (Windows 8)
    Using Bluetooth Devices (Windows 8)
    If you require further assistance, please provide the model and product numbers for your notebook.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Keynote remote will not pair with ipad after update to 10.7.2-bluetooth issue or remote app issue?

    Noticed keynote remote will not pair after updating.  Bluetooth light flashes a couple of times then goes off.  I'm wondering if it's a bluetooth issue or a keynote remote app issue.
    Any suggestions or remedies?
    thanks

    Then again, it may not.
    I've tried all the things recommended in the Apple KB article, and it doesn't work.  Mulderscully is right, in the recent iOS 5 upgrade, Bluetooth is not turned on (at least, its symbol is not visible) from within Keynote even if you turned it on in the Settings menu.  Posts in another thread recommended using another app to establish a Bluetooth connection between the iPad and iPod (I used Touch Rummy), then switching back to Keynote and Keynote Remote.  This does work for me, but it is an awkward workaround.  Shouldn't 'It just work'?

  • HT204368 My iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps.  It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed.

    My new iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps, nor does it give me handsfree as before.  It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed.  It also sometimes gives the message that this device is not supported by iPhone (although I have been using it for several years) with my UK and Ireland, Western Europe, and USA and Canada apps.  Just replaced my 4 with a 4S rather than a 5, which won't fit the mounting kit.

    From their web site Tom Tom actually offered a converter kit at one point however all it was a 3mm thick bit of plastic with a self adhesive tape backing!
    Reference reading here
    http://uk.support.tomtom.com/app/answers/detail/a_id/10561/kw/original%20iphone% 20kit

  • How do I send files from my IMAC via bluetooth to my ne Ipad.  They will not "pair" but they are connected and discoverable.  I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

    How do I send files from my IMAC via bluetooth to my new Ipad?  They will not "pair" but they are connected and discoverable.  I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth,  but the failure message says the ipad does not have the necessary services.  What are these?  Do I neeed to have iphoto and ms word to send pix and .doc files?

    File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

Maybe you are looking for

  • Extended Notifications: how to change the URL link

    Hello, We are on ECC6. We use Extended Notifications to alert users to the presence of new workitems, but when they click on the link to execute the workitem, they're presented with the login screen. We have been able to send emails from workflow whi

  • How do I get my iPod touch to work after the update?

    I updated my iPod touch with the new software. I went through all the steps like my location and language and such and I chose to "Restore from iTunes backup". I tap next and connect to iTunes on my computer. It syncs my things and my iPod still says

  • Not able to clear material from quality stock

    Hi, There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still pos

  • ISight as video recorder

    How come my iSight camera stops recording (using photo booth) when the screen saver starts or the photo booth window goes off the desktop? I just can't hide the app and keep it recording? Is there some sort of law involved? Thanks, Hock

  • Can't start BIS in Q5

    Dear sir,  i purchased blackberry Q5. yesterday recharged my mobile and activate BIS plan from my service provider but it cannot be activated on blackberry device. So help me for activation. My blackberry PIN 2B3243B7 service provider airtel india. T