63031 can i use its camera as web cam

dear sir,
i have nokia 6303i, i want to use its camera as web cam. it is possible
please revert back at
Moderator's Note:
Editted Post.
PM sent to user:
E-mail Address Removed - Please note that it is unwise to post personal contact information on a public web forum.
Best Regards,

The phone contains no software to facilitate this use, so the immediate answer is 'no'.
It might be possible in theory to a program running on the PC to user the phone's camera as a remote peripheral whilst a connection in PC Suite mode is in place, but I don't know of any such software in existence - there would be relatively little demand for this.

Similar Messages

How can i use my X6 as web camera.?

how can i use my phone's camera as web camera.....????

Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

Can I use iCloud as a web host

I have no knowledge of iCloud. I have never wanted to have all of my information "out there". So my question is two fold; can I use iCloud as a web host for a webpage I design in iWeb. I'd like to advertise my condo for rental. The second part of my question is; can I only store that portion of information on iCloud, or do I need to share all of my computer info?
Thank you.

No.
iCloud isn't like our old iDisk. It's more about connecting muliple devices to the same shared data.

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable?

Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.

No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

Can we use SQL Server 2012 Web Edition as a witness server in mirroring?

Hi All,
Can we use SQL Server 2012 Web Edition as a witness server in mirroring?
Grateful to your time and support. Regards, Shiva

Hi All,
Can we use SQL Server 2012 Web Edition as a witness server in mirroring?
Grateful to your time and support. Regards, Shiva
As Per BOL
We strongly recommend that the witness reside on a separate computer from the partners. Database mirroring partners are supported only by SQL Server 2005 Standard and later versions and by SQL Server 2005 Enterprise Edition and later versions.
Witnesses, in contrast, are also supported by SQL Server 2005 Workgroup and later versions and by SQL Server 2005 Express Edition and later versions. Except during an upgrade from an earlier version of SQL Server, the server instances in a
mirroring session must all be running the same version of SQL Server. For example, a SQL Server 2005 witness is supported when you are upgrading from a SQL Server 2005 mirroring configuration but cannot be added to an existing or new SQL Server 2008 or later
mirroring configuration.
A witness can run on any reliable computer system that supports any of these editions of SQL Server. However, we recommend that every server instance that is used as a witness correspond to the minimum configuration that is required for the SQL Server Standard
version that you are running. For more information about these requirements
http://technet.microsoft.com/en-us/library/ms175191.aspx#SwHwRecommendations
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

PC Cam or Web Cam?

Which is better PC Cam or Web Cam for the clearest picture for video messaging?

LEOBILLAS,
The PC-CAM 900 does not come bundled with tripod and yes there's a camera stand socket at the base of the PC-CAM. You can probably download the manual of the PC-CAM for reference at Product Documentation page.
Jason

How do I use the built in web cam?

I would like to start using the web cam on this TouchSmart 600 but I am not sure where to go or how to start. Do I need to use a certain software or how can I get to it? Thanks

Hi,
Please use this guide
h10032.www1.hp.com/ctg/Manual/c01455314.pdf
Merry Christmas.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with image control using more than 1 web cam

Hi,
I am using logitech quickcam pro 4000.Actually I want to get image from
3 web cam at a time wich will act as a CCTV.I want to get picture from
more than 1 web cam at a time.But,When I start the .vi,than I get image
from 1 web cam.I have attached the vi and the demonstration file.
If anyone has any idea please send me a reply.
(The code was constructed using information
from the Logitech Software Development Kit, downloaded from the Logitech web
site January 4th 2004. This
package includes the royalty free distribution with the camera driver.
To install the package, download and unzip
LabVIEW Logitech UWA.zip and run Setup.exe in the 'redist' folder. This installs drivers (if not already
installed). Then run LabVIEW and open
Logitech Image Acquisition Master.vi.
Click the LabVIEW run button.
Notes for Understanding the Code
[1] The camera is controlled by an Active-X
reference from a front panel Acitve-X container that displays the pre-view
image. To create this, create a blank
Active-X container on the front panel and select the Active-X Hydra Video
Portal class.
[2] Three methods are called, following the
Visual Basic guide from Logitech. The
first establishes a connection to the Active-X server. The status bar is activated in the preview
window (EnableUIElements), and we connect a camera (ConnectCamera2).
[3] Here we set the value of property
'EnablePreview' to turn on the preview panel.
[4] We can get the camera description for
camera zero here (the first camera connected).
[5] Here we select the video format (64x480
– can change it later). The next call
establishes the preview size by setting property values. The preview size should be the same as the
video format for fastest image acquisition.
[6] We are restricted to saving the picture
to a BMP file and then reading it in again.
This is a limitation of the SDK.
After reading the image file we can change it to a JPG if we wish to.
[7] Here we re-read the image file and
provide it to ImageDisplay.vi.
Other methods and property values are
reasonably self evident. In LabVIEW, if
you right click the Active-X reference terminal on any method, you can create a
new method by simply selecting the appropriate one from a list. The parameters for the method appear
automatically and should be reasonably self-evident from the names. If you want more details, download the SDK
from Logitech.
Other methods allow you to make movies in
real-time or time-lapse sequences.
Note that you can also monitor Active-X
events to detect inputs or parameter changes made elsewhere. For example it is possible to detect when
the button on the camera is pressed.)
Thanks
Kabir
Kabir mamun
PhD Student,DCU
[email protected]
www.iward2010.blogspot.com
Attachments:
Logitech Image Acquisition Master.vi ‏98 KB

Hi Peter,
Thanks for your e-mail.And sorry for late.
I have changed my activex server in my labview programme.Current
server name is XVideoOCX.I have attached 1 example.Still I am facing
the same problem that I am not getting disply from more than 1 web
cam.So would you be able to advice me,what should I do regarding this
matter.
Actually,This is a part of my M.Sc project.I am under pressure.Peter,Please do me this fevour.
Thanks
Kabir
1 eample from help file:
Video Disply
1. Choose the input mode (Video, Single Image Files, Screen, etc.)
XSetInputMode(0) // This
chooses video as input
2. Choose the video device
XSetVideoInput(0) //
Choose the first available video input device
3. Initialize XVideoOCX
XInit() // Initialize
XVideoOCX
4. Start internal video capture
XStart()
now XVideoOCX should display the live video
5. Stop internal video capture
XStop()
6. Close XVideoOCX
XClose()
Kabir mamun
PhD Student,DCU
[email protected]
www.iward2010.blogspot.com
Attachments:
ax2.vi ‏23 KB

How can I use XMLBeans in a Web Services client?

How can I use XMLBeans in a standalone Java client with a Web Service?
I posted the message below earlier in the year, but have not yet been successful
in my
attempts.
regards
Eddie
Hi,
I'm trying to using XMLBeans to send a document to a web service from a standalone
Java client. I'm using the PurchaseOrder (easypo) example document, and the service
expects a parameter of type PurchaseOrderDocument. The client proxy class generated
by WebLogic Workshop, however, expects to send a parameter of type PurchaseOrder.
In the client, I can instantiate a PurchaseOrderDocument, and then obtain a PurchaseOrder
(e.g. pod.getPurchaseOrder() ), but the returned class is not compatible with
the PurchaseOrder type that the client proxy expects.
In a previous attempt (not using Workshop), the client would not compile because
it expected to send a non-abstract class with a public default constructor (presumably
a JAX-RPC requirement), and XMLBeans had generated an interface.
Any help would be greatly appreciated!
thanks & regards
Eddie

I have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
<script language="JavaScript" type="text/javascript">
function showtext(){
var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
alert(editortext);
</script>
Hope this helps.
Matthew

Can i use the lightning to usb camera adapter for sony cybershotdsc-w380

DDoes anyone know how to use a lightning to sub camera adapter for a Sony cyber shot doc-w830

This discussion may help.
It mostly depends on the camera. Some cameras have a Transfer Mode, which does not attempt to charge while transferring pictures. does yours have such a setting?
Alternatively you can try to plug a powered USB hub between the camera and the USB connector so the power is provided by the HUB rather than the iPad.
Other than that, yes the Memory card reader may be a better option assuming your Camera uses Secure Digital (SD) type memory cards.

Can I use my mac book pros camera,and view it on my iPad?

can I use the camera on my mac book pro and view it on my ipad? if so how?

Try this:
http://www.screenrecycler.com/ScreenRecycler.html

Can I use iSight as a still camera?

Hello!
I recently purchased a MacBook Pro 17". I wish to know whether I can use iSight as a still camera or not.
Actually, when I was setting my MacBook up and came to the setting where it asked for my display picture, I hastily clicked a very unusable picture of myself and proceeded with the rest of the settings. I thought I would change it later. I then installed Microsoft MSN Messenger and it displayed that stupid picture as the display picture. I changed my User Account picture after that to a better one but MSN Messenger still is displaying the same picture as the difault picture. How do I change it? I don't even know where Mac stores the User Account picture. So, I wanted to click another picture of myself with the iSight camera and store it in the pictures folder so that I could change MSN Messenger's display picture. Is it possible? If not, how else can I change MSN Messenger's picture to the User Account picture on my OS?
Sorry for the huge rant and please do reply ASAP!
Thank you!
MacBook Pro 17" Mac OS X (10.4.6) Memory upgraded to 2GB

Hi Cool 'n' Casual,
Sort of.
You have PhotoBooth on there which will give a warning before it click the pic and flashes the screen to improve lighting when it does.
It can be a "normal" pic rather than any of the specials.
iChat itself can take a snapshot. It can be done from the Buddy List and clicking on your current Buddy pic and following the buttons. Or from the menu bar in Video.
Photobooth stores the pics and can link directly to iChat to post a pic.
Your Recent Pictures are stored in Users/(your account)/Library/Images/Recent iChat Pictures.
It is likely that you will have to navigate to this folder if you want MSN to display the same pic.
By default iChat will display the Pic you selected for your Mac user account when you set the computer up as seen in the Address Book for your Me card. It is probably this one that MSN is displaying.
11:28 PM Sunday; August 13, 2006

Can I use iSight as a remote camera?

I'd like to use iSight as a remote camera and record the video to a miniDV camera in a safer location.
I don't have a nearby Applestore to go check this idea out, does anyone know if it's possible? I have a powered FW hub, so I can power the iSight w/o a computer (I think)

You're welcome, Mark. Have you driven an iSight from a Dazzle before, or do you know someone who has?No.
Although I have no technical data to quote that proves this, based on reports posted in Apple Discussions, I believe that iSight is less protected against shock, vibration, dust, and humidity than my "walking-around" cameras.
I use a camcorder or the movie setting on my digital still camera for recording movie clips when I will be moving the camera. I do not mean to imply that iSight is inordinately delicate, merely that it is not as shock resistant as cameras designed to be carried. I would be surprised if iSight would withstand the rigors of aerobatics.
Based on what you want to do, iSight's seemingly modest shock tolerance, and the price of GL2s, I would look for a device more like the sports camcorder mentioned earlier.
Perhaps others can offer some first-hand experience that will be relevant to what you want to do.
Jim

Can i use unc or ucwa web api to build android and windows phone app ?

is there anyway to develop custom client application using unc web api ( android, ios, windows phone ) with following features
App to app audio / video calling
App to app audio conference call
App to app messaging

Instant messaging is perfectly supported already by UCWA, audio/video are not at this moment.
UCWA can be used by any platform/device that can 'speak HTTP', so yes the platforms you mentioned are suitable UCWA clients.
You may adopt third party solutions and combine them with UCWA within your app in order to achieve audio/video call support.
HTH
Massimo Prota
.NET MCAD - SP2007 MCTS - SP2010 MCPD and MCITP
My blog: http://blogs.ugidotnet.org/mprota - Twitter:
@massimoprota

63031 can i use its camera as web cam

Similar Messages

Maybe you are looking for