6310 printer flashing front USB port (camera)

When I turn printer on, dispay says "checking cartridges" and USB on bottom left is flasing with the camera symbol. I cannot use any menu function keys or the on/off, I must turn it off at the wall. I cannot find it in troubleshooting and I have cleaned the cartridges. Any ideas????

I have the same problem. Did any figure out the solution?

Similar Messages

Can't use front USB port for external Hard Drive

I have had some problems for about the past year with the front USB port on my 2009 13in Macbook Pro 5.5.
As you know, there are 2 USB ports on the left side on a 13inch Macbook pro. The one closest to me (the front one) works fine when I use it with a flash drive. But when I connect my external 7200RPM external drive to it, after about a minute, it ejects then re-recognizes the disk.
I video edit with FCP and use the external as one of my scratch disks.
At first I thought maybe it was the cord or the drive that was messed up. But then I connected my other external drive to this port and the same thing happened.
But when I connected it to the back USB port, everything works fine. I haven't had any trouble. So i make sure it's connected to that port when using the external.
Why would this be happening. It only screws up when using a standard external drive but not flash drives or any other peripherals.
Thanks
Brandon

Exactly what Ogelthorpe mentioned.
I bought a Seagate 500GB 7200RPM and bought an external case from Staples that has a big fancy led to show HD activity. Sometimes it works and sometimes it doesn't.
Tested it on my PC and it works all the time so it got me stumped. Thought it was my MB.
Decided to try another external drive drive on my MB and everything works. So I returned the fancy external enclosure and bought the simple $10 one.
Now everything works fine.
Maybe changing your external case might help you.

Front USB ports connection to K8N NEO4 Platinum

the system im building resides inside a CODEGEN Briza A Series ATX tower (Part Number E6097), my question has to do with how im i supposed to connect the frontal usb ports of the case to my MSI K8N NEO4 Platinum board (MS-7125). the board features 3 yellow colored 9 pin (pin 9 is a key (no pin)) standard USB 2.0 connectors, while my case comes with two frontal USB ports with 2 sets of connectors arranged as follows:
+1 3-pin connector with red, white, green wires labeled "USB 1"
*1 1-pin connector with black wire labeled "GND"
+1 3-pin connector with red, white, green wires labeled "USB 2"
*1 1-pin connector with black wire labeled "GND"
*the black wire is part of the connector itself however is detached from the 3-pin and has its own 1-pin connector, which is "ground"
+the 3-pin features a small triangle at the base of the connector with the red wire.
total pin count for both ports would thereby be 6, as some of you already know this board features a 9 pin arrrangement in its yellow usb connectors.
the manual its pretty clear on the need to make sure those connections are correct to prevent damage to the board or the device attached to those ports,
any takers on this one ?

Quote from: ceckardt on 23-January-06, 05:53:53
the system im building resides inside a CODEGEN Briza A Series ATX tower (Part Number E6097), my question has to do with how im i supposed to connect the frontal usb ports of the case to my MSI K8N NEO4 Platinum board (MS-7125). the board features 3 yellow colored 9 pin (pin 9 is a key (no pin)) standard USB 2.0 connectors, while my case comes with two frontal USB ports with 2 sets of connectors arranged as follows:
+1 3-pin connector with red, white, green wires labeled "USB 1"
*1 1-pin connector with black wire labeled "GND"
+1 3-pin connector with red, white, green wires labeled "USB 2"
*1 1-pin connector with black wire labeled "GND"
*the black wire is part of the connector itself however is detached from the 3-pin and has its own 1-pin connector, which is "ground"
+the 3-pin features a small triangle at the base of the connector with the red wire.
total pin count for both ports would thereby be 6, as some of you already know this board features a 9 pin arrrangement in its yellow usb connectors.
the manual its pretty clear on the need to make sure those connections are correct to prevent damage to the board or the device attached to those ports,
any takers on this one ?
i quote myself on this, and having gone in detail on the boards manual i simply came to the conclusion that those front usb ports shall remain disconnected for the time being

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.

Is there a cable that will go from my hp psc 500 printer to a usb port on my computer.
This question was solved.
View Solution.

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Front USB Ports NOT Working

Really need help from the experts here ------ HP Pavilion Slimline s5-1 Desktop Model: H2M46AA (has Joshua mainboard with Intel H61 Chipset) Hard drive crashed and have no original drivers. Did clean install of Win7 SP1 Home Premium. All OK except Other Devices, Universal Serial bus (USB) Controller. Driver cannot be found. After the Win7 install, installed an ethernet driver and then from HP website installed the Original Chipset files. All drivers OK except the above which apparently controls the front 2 USB ports which didn't work. Next, installed all updates provided by Windows Update. Front USB ports still inoperative. They worked before the new Win7. After much research, inoperable front USB ports appears to be a common problem, but none of the provided solutions help (check cables, power down completely, Intel Driver Update Utility, etc.). On my system, the first of 4 Hardware IDs for this device show as: PCI\VEN_104C&DEV_8241&SUBSYS_2ADA103C&REV_02. According to pcidatabase.com, this is identified as: "Texas Instruments USB 3.0 XHCI Host Controller", and thus a possible the problem. The ports are, I believe, USB 2.0 and not 3.0 according to Joshua documentation (http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000525 Also, review of "\windows\inf\setupapi.dev.log" shows there are no files on the drive associated with the above Hardware ID because they cannot be found during driver installation. So question: How can I get these USB ports working -- have installed every recommended HP update for this system. I'm stumped!

You're right, it's just an update of the driver but I think it is specified, you can see theTechnical Reference: ftp://ftp.hp.com/pub/softpaq/sp70501-71000/sp70786.html TITLE: Texas Instruments USB Controller Driver Update
VERSION: 1.12.25.0 REV: A PASS: 2
DESCRIPTION:
This package provides the driver update for the Texas Instruments XHCI
Controller solutions in supported models that are running a supported operating
system.
PURPOSE: Routine
SOFTPAQ FILE NAME: SP70786.exe
SOFTPAQ MD5: 9bd312c3c424161a6c3357d260dcf939
SUPERSEDES: SP59644
EFFECTIVE DATE: March 06, 2015
CATEGORY: Driver-Chipset
SSM SUPPORTED: No
PRODUCT TYPE(S):
Desktops
HARDWARE PRODUCT MODEL(S):
HP Pavilion HPE h8-1xxx PC
HP Pavilion p6-XXXX Desktop (Joshua)
HP Pavilion p7-XXXX Desktop
HP Pavilion Slimline s5-XXXX
HP Pavilion p6 PC
HP Pavilion HPE h9-1xxx Phoenix PC
HP Pavilion Slimline s5-1xxx PC

HT3258 I have installed Mac 10.8 having issues w/HP 2605dn printer. I have done the updates as required still have issues getting it to print on network. It prints fine on USB port, but I need it networked, what gives?

I have installed Mac 10.8 having issues w/HP 2605dn printer. I have done the updates as required still have issues getting it to print on network. It prints fine on USB port, but I need it networked, what gives?

Thanks for your reply, this puts my mind (what's left of it) at rest. Now to sort out the new printer broblems since installing oldMags

Front USB Ports

I'm hoping someone might be able to help.
I have an MSI 945P Platinum motherboard with an Aspire X-Navigator case. Running Windows XP. My back USB ports work fine with no problems.
But if I plug anything into the front USB ports, the system freezes. I've checked the connections for both USB1 and USB2 - there is no 10th wire or USBOC connected. But the system still freezes every time I connect anything. Is there anything else I can try, or do I just forget about it & use the back ports? Can anyone help? Thanks.....

okay, i looked again at the usb header
and there was a wire connected to pin 10
so i cut it
started up windows, and amazingly, my front usb ports are now working
i keep plugging in & disconnecting devices - everything i plug in the front ports now work
thanks

Print a File from Forms to a Printer connected to USB Port

Hi All,
I have a printer connected to the USB port to my local machine.
I access web application Forms 9i AS and try to print a report on my local printer.The report is opened using web.show_document in the Internet explorer browser window. There are several pages in the report and i need a page break to be recognized on each page. For remote printing i tried using ORARRP utility but it does not print from a printer connected to a USB port. But it works when the printer is connected to a parallel port.
How do i achieve this, please share your thoughts on this and solution as well if this is feasible
Expecting a favourable reply from the forum users.
Thanks in advance

WEB.show_document is mainly for running a report that you want to display in a browser but you can still use it to create a file in the report server even though I would recommend to use RUN_REPORT_OBJECT instead ...
You can take a look at metalink note 207396.1 - How to Run Reports From Forms 9i / 10g Using RUN_REPORT_OBJECT.
It appears you are already using it since WEB.show_document in your case is just used to retrieve the output from a job that was previously run, most likely with RUN_REPORT_OBJECT.
Can you post the code used to run the report ? It will be easier to convert it to generate a file if we have it..
The file name you assign it when you call the report (DESNAME=d:\mysharedfolder\mytextfilenameyyymmddhhmiss.txt) so that it is unique and you delete it after the report is printed, webutil can give you a private folder for the user in the application server, in case the data is sensitive, you would run the report with DESTYPE=FILE and MODE=CHARACTER.
You would need two folder locations, one in the application server, webutil can help you with that, and another one in the client PC, it could be the C:\TEMP folder if you will ...

Where are the front USB ports on the HP Envy 700-210 Desktop?

I bought the Envy 700-210 desktop because it has so many USB ports. However, I can only find 8 - 2 on top and 6 in the back. According to the specifications, there are supposed to be some in the front. Do I have to take something apart to find them?
Thanks.
This question was solved.
View Solution.

VJR-Savannah, welcome to the forum.
Here is the Product Specifications page for the computer. If you look at the picture of the computer in the link, I believe that the front cover below the Red band slides down to expose the USB ports. This is how it works on my Envy 810-135qe.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to setup a usb printer on the usb port of a network storage drive

I have searched the forums and dont see any real info on this..
I have a usb based officejet 7590 , winxp, and a iomega home media network storage drive
the printer works fine when I install it on the local usb port of the laptop
BUT
its not clear how to connect it ot the usb port of the network drive.
DO I have to resinstall it as a network printer?
DO I have to resinstall device drivers if I already installed it as a usb printer for the local port?
Can I use the scan/fax functions if I do it right?
thx!

OK, I will use it as a bookstand...
Since I obviously don't know enough about networks I will stay away from 'professional' products like the Cisco products.
The user interface and the documentation of these products are clearly made by nerds for nerds...
Thanks for your help.
Paul

I can only print from one USB port - is this a problem

Hi
I am a recent convert from PC to Mac, with a new Intel-based MacBook. I have installed my Epson Stylus D68 Photo and have been successfully printing (eventually!). However, after recently unplugging the printer to move the laptop and then reconnecting the printer I get "communication error" messages and no print. I found that the printer only works when connected to one of the USB ports (even after full reboot etc). Other devices work in the other USB port...
Is there something wrong with the machine or me?
Stu
MacBook (Intel) Mac OS X (10.4.7)

PSE is a one-off purchase. You can buy a retail DVD in an electronics store or as a download from Adobe. You have 2 activations for non-concurrent use and the license is croos-platform for Windows and OSX if you so desire.
Mylenium

Connect a LJ 2100 printer to a USB port on my router

I have a LaserJet 2100 printer with a parallel port cable. Can I use a DB-25 to USB converter to connect the printer directly to my ASUS RT-N66U router to make it a network printer? Will I need anything else (software, firmware, or ?).

Thanksfor the comment, sabretooth. But are you saying that I just need to connect the printer directly to the router with a LPT to USB converter and that might (or might not) work? No other hardware or software needed?
The problem that I am worried about is the fact that this is an old printer and I want to connect it to a home network with two Win 7 computers and one Win 8.1 computer. All information about networking the HP 2100 refers to Win 98 and Win 2000!

Lost power to front USB port

With Tiger I could plug any device into my USB port on the front of my dual 2 GIG G5 and it will work. Now with Leopard if the device is not under it's own power, like a portable HD, it is unusable. How can my USB port work fine with Tiger and become unusable with Leopard? I have a lot of portable HD's as I'm a photographer and use the HD's as backups. Any suggestions would be very appreciated.
Link Removed by Host: Please see the terms of use regarding signatures and links

Shut down your G5 and unplug everything including the display, FireWire and USB devices as well as the power cord. Let it sit for five to ten minutes completely unpowered. This should reset all the FireWire and USB ports. Plug the display back in, power back in, turn the computer back on and plug your devices back in one at a time. Does this resolve the issue?
-Doug
P.S. It's against the Terms of Use of the Apple Discussions to post a link unless it's a direct answer to someone's question. You can add a personal web page to your public profile through the "My Settings" page.

Front USB Ports not working on Z97-G45 motherboard

Hey there, after upgrading from Win 7 pro x64 to win 10 x64, I found my front usb 3 ports are not working. I figured it was drivers so I installed the chipset drivers off the MSI website, with no luck. I keep getting Unknown USB Device (Device Descript...

Quote from: Capt.Alberto on Today at 01:21:08hmmm.
i wonder , was it at this temperature since the beginning ?
there's a good chance that you need to ship it back .
your temperature is far from what it should b...

Front usb port died

Early 2011 MacBook Pro 8,1 running Mac OS 10.7.5. Two USB ports on left side (facing screen). Back one (closer to display) works, front one doesn't. Plug iPhone in to sync and charge - phone starts charging but doesn't appear in Finder or iTunes but is available to import photos via iPhoto. What's up? Have I configured something wrong?

More info on my machine:
Model:
MA970LL/A
Description:
Mac Pro MA970LL/A
CPU:
1x Intel E5462 Xeon 2.8GHz Quad-Core Xeon Processors 1600MHz FSB
RAM:
2GB (4 x 512GB) 667 DDR2 ECC FB Memory - Supports up to 16GB
Hard Drive:
1TB SATA 7200 RPM Hard Drive
Optical Drive:
16x SuperDrive w/Dual-Layer Support (DVD+R DL/DVD+-R/CD-RW
Networking:
2x 10/100/1000BASE-T Ethernet (RJ-45) Interfaces
I would be willing to replace it, any advice on what exactly I should look up?

6310 printer flashing front USB port (camera)

Similar Messages

Maybe you are looking for