6310i broken ON/OFF switch

Does anyone have any suggestions for how I can get my 6310i to switch on now the ON/OFF switch (the one on the top of the phone by the IR window)is broken?

you need to take it to NSC it is the best.the power key is on the pwb and there are lot of components nearby.it is better to take it to NSC.
tongue is too confused on what to speak

Similar Messages

HT1430 my on/off switch is broken and my phone won't turn on?

my phone has a broken on/off switch and now it has turned itself off and i cant turn it on

go to the apple retail store and get it fixed

Lifedrive power on/off switch broken

HELP. My Lifedrive is 4 years old and has worked well for the older technology. However, the on/off power switch broke. That is, it slides easily rather than moving the on/off switch, and does not turn the power on or off. The last position was LOCKED. So I can't get into the data. A soft reset brings up the screen, but the screen has the numbers half shaded, and does not recongize being touched or tapped. There seems to be nothing that works. A hard reset is not possible because the on/off switch does not work. Most of my data is synched with my computer. But I had done an oral history interview and voice memos do not synch to the palm desktop. So my questions are: 1) does anyone know how to turn on a locked Lifedrive with a broken on/off power switch? 2) does anyone know how to recover voice memos from a unit in this condition? 3) does anyone know how to fix a broken power switch on a Lifedrive? Sure hope someone can help.
This question was solved.
View Solution.

This is how it looks like after you remove the plastic shell. The piezoelectric speaker is attached to the plastic shell.
Unplug the battery from the motherboard. I use a small flathead screwdriver to separate the connectors gently.
Remove the unplugged battery.
Now, write down numbers 1 through 4 on the blue plastic pieces that supports the microdrive; this way, you will not get lost as you put everything back together.
The microdrive is plugged into the CF interface. There's a warning sticker placed over the lower half of the microdrive and the CF interface. Carefully cut through the sticker between the CF plug and the microdrive using the very tip of the knife. Gently unplug the microdrive from the CF interface with a non-metal flat-head screw or equivalent.
Now the microdrive (in my case, a 32GB compact flash memory) is half unplugged from the CF interface. Continue on, being careful not to damage the delicate pins.
Congratulation! Completely unplugged.
Remove the microdrive (or a CF memory).
Unplug the microphone wires from the motherboard in the same manner as you did to the speaker wires.
Unplug the connector for a film cable gently with a plastic flat-head screw or equivalent.
You do not want to have delicate film cables cut by accident, so be careful.
Unplug the connector for another film cable gently with a plastic flat-head screw or equivalent.
Remove the two very short torx screws.
Finally, the motherboard is lifted up and you can see what happened to the Power Switch.
The inner switch on the central top of the mother board was found to be in the locked position.
One of the two legs of the plastic piece was found to be broken. The other leg looked ok.
I manually slided the inner switch to unlocked position.
Another photo of the inner switch. If the inner switch is found to be broken, refer to
http://1src.com/forums/printthread.php?t=121887 , and order a new switch from Mouser Electronics, www.mouser.com
Part Number: 688-SSSS7A0101
Manufacturers Part Number: SSSS7A0101
Desc: SP3T W/ SNGL RECOIL
ALPS SMD Slide Switches
RoHS: Compliant
I believe your inner switch is not broken.
Put the mainboard back such that the plastic piece can slide the inner switch to on or off position. Be careful not to break the other good leg in this process!
Put everything back together carefully. As you start up your Lifedrive, you will notice that the date and time are set to the default, so set them right. Good luck to you!

Off switch has failed on my Creative Zen Mi

Hi, Has anybody else experienced a failure of the off switch on a Zen Micro. It's been working fine for several months but n has just stopped working now. I've tried a re-set but that does not work. Once on after synchronising all the other functions function properly but it can't be turned off or back on again.

Does the player turn on when you connect it to the PC? If so, then it sounds like the button itself might be broken. I'd advise you contact Customer Support for assistance then.
Cat

The Ringer-Off switch is too inflexible for me... What options do I have?

The Ringer-Off switch is too inflexible for me... What options do I have?
Even with the Ringer Switch off, I still want some alerts and alarms to make noises, and not just vibrate.
It used to be that setting a Reminder could cause a Sound-Alert with the ringer switched off, but this is been "fixed" (broken) in iOS 6, I think.
Only Timer alarms can make sounds (via the speaker) with the ringer switched off, as far as I can tell, although Music and some other Non-Alarm apps can make sounds, somehow. I have heard no good explanation of how this is achieved.
What options do I have in which categories?

ChrisJ4203 wrote: Okay, now we are getting somewhere. You do not want to use the mute switch.
Yes, I said that a couple of times, athough Ringer switch ON and OFF have unspecified senses, as I noted, so I said "Sound Enabled" to clarify.
I have been giving feedback to Apple for 27 yrs now, 100s of them, with not a single one acknowledged or implemented. Much better chatting here, and similar sites.
Since we cannot control Apple (Ha!) or encourage or affect them, it seems the switch must not be used to disable alerts and sounds, but to leave that to smarter software.
The "Do Not Disturb" switch is getting closer, but needs much much more flexibility, including for example, Sounds when email arrives from a specific person (like the ring-twice, and Allow Calls from Favourites, which I would NEVER do.)
An Allow-Calls from these numbers (list: x, y, z) would be nice, as Favourites includes people I would never want to interrupt me.
Perhaps Do Not Disturb by a 3rd party? Anyone know of such a thing?

When I click on a link in an email, the comoputer locks p and the screen goes black, requiring a shut down from the on-off switch. My version of Firefox is up-to-date.

The on-off switch is the only way I can turn off the computer, because the screen is black. Then I turn on the computer again to reboot, and when I click on Firefox again it takes from 30 to 90 seconds before Firefox opens, at which point I get a message asking if I want to begin a new session. Then I open emails and don't click on any links. If I check my email using Internet Explorer, the problem does not occur. Your help would be appreciated. After 50 years of operating comoputers, I have never seen this problem. Regards----Lloyd Schultz

Fred...thanks, but this is not about one site. The same thing happens often, with many sites, when i click a link that has come up in Google search, or on Twitter or Facebook or within a story I'm reading. The link takes me to the url of what it was supposed to take me too, then within a second or so it switches to that Yahoo 'error handler' url, a page that offers search for similar sites.
Again, thank you.

HOW do we get you guys (and gals) to STOP CHANGING THE INTERFACE WITHOUT AN OFF SWITCH ???? A FEATURE WITHOUT AN OFF SWITCH IS JUST ANOTHER DEFECT !!!

Every time I choose to, or am forced to, upgrade, there is at least one stupid / un-useful/ performance or usability killing change to the Interface.
Make the product better or faster but STOP making Front End changes that cannot be undone, and also please document all front-end changes and how to set them back.
Beta testers are NOT a good poll for customer assumption. I beta many programs and am always shocked and amused at just what other users think is "useful", but i NEVER would suggest a front-end change without an 'OFF SWITCH" or "Choice-seletion" - that way, everyone is happy.
I.e
1 - New download window just sucks. I don't need to see History, the left waste-of-space window, nor the waste of space that comes from NOT having a 1-lin per download display
2 - Who was the brain surgeon who decided that no one wants menus, and then did not document it - we all had to find out in web searches just what key under about:config turns off that stupid button
3 - Tools/Options .. WHERE did all the OPTIONS GO ?? There used to be pages for each tab ?
Note - this is being sent from an XP system - but the same stupid things happen on my Win7 and Linux systems

edmeister
I thought this was a gateway to the programmers and did not mean to deliver my scorn and distaste to you.
no offense, but your suggestions, all of them fall into the "just accept it and move on" category - which is just NOT acceptable to me.
.. I just ran into another "improvement" in 21.0 that has my teeth on edge .. and then the automatic update-notifier, if it was aware, would wonder why I strenuously refuse to upgrade .. - Every time I upgrade, something stupid is added or something useful is removed, and the only 'official' answers are to use a 3rd party add on or just 'accept it', or spend time, a LOT of time, decompiling and recompiling old FF code and adding it back into the current version to regain the Front end I want ... which is VERY time consuming.
How does one speak to, talk to, contact, the actual programmers or Product managers of this once-wonderful tool that is now running dead last behind Opera, Chrome and Safari (which is two years old and still better than version 21).
....I just restored my original downloads window, menus AND behavior but it took a week. I sent the message that you replied to when I was just plain stuck in rebuild, with no idea what was wrong. Took my son to notice an extra paren and comma ...
PLEASE tell me how to speak to, email with or at least contact, the actual programmers or Product managers ..
thank you

I have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help

i have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help

Open Automator
Choose Folder Action for type of document
At the top, for Folder action receives files and folders added to, select Other...
in the window that opens, select your Downloads folder, and then Choose
from the Actions on the left, drag Filter Finder Items over to the column on the right
Where it says Any Content, select Kind
Where it says Any, select music
Drag Move Finder Items over to the rightfor To: select other, and navigate to your user folder > Music > iTunes > iTunes Media > Automatically Add to iTunes
it should look like this:
close the window and give the folder action a name.

My IP4 on/off switch has stopped functioning.

My On/Off switch has stopped functioning. No depression, no click and no response. Has anyone else had this problem and if so, did you solve it? How?

You have a hardware failure. Bring your phone into Apple for replacement. If it's under warranty, it will be replaced free of charge. If not, you will be charged an out of warranty replacement fee of $149.00

My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

Java script on off switch issue in IE, Please help

Hello;
I wrote this little script that is an on / off switch for a background sound on my web page. I have it working in all browsers accept all versions of IE. I have been pulling my hair out for weeks trying to get this script to work in IE and have only met failure. There has to be a way to get this thing to fire properly and I just can't figure out what I am missing.You can take this script, add your own sound and see how it works. It is very simple.
code:
<head>
<script type="text/javascript">
function stopSound(){
document.getElementById('PacSound').src='../video/silence.wav';}
function playSound() {
document.getElementById('PacSound').src='../video/RollerPop.wav'; }
</script>
</head>
<body>
<embed src="../video/RollerPop.wav" id="PacSound" autostart=true loop=true volume=100 hidden=true>
<noembed><bgsound src="../video/RollerPop.wav" loop="-1" volume="100" delay="0" id="PacSound" hidden="true"/></noembed>

<a href="javascript:stopSound();" >Stop Sound</a><br />
<br />
<br />
<a href="javascript:playSound();" >play sound</a>
</body>
I am so frustrated with this. I have tried a number of different approaches to this code and I always meet failure. I am trying to make it work so the page does not re-load it's self, just turns it on and or off.
Can anyone please help me figure this out?
Thank You

I suggest a search on the Internet for Microsoft and Javascript. Be as specific as you can and you might turn up a page or resource that shows what Microsoft supports.
Beth

Replacing my on/off switch for my Mac Pro 2008

I have been trying to find online a DIY site to help me insure I take my Mac Pro apart correctly so my expensive computer isnt trashed! LOL Seriously, I am good with my hands but will need some idea of getting to my on/off switch and replace it.
Thanks!
G

Thanks Bro - Wish I lived in Canada - I'm Thinking about it - it is a very beautiful country !!!
Your help is much appreciated here, from this Texas Guy -- LOL Thank you I will give it a whirl!

IBook G4 on/off switch soldered connector

I recently installed a new hard drive. While replacing the hard drive I pulled the wires that lead from the on/off switch to the connector that's soldered to a board completely off. Now the wires aren't connected and my computer won't power up. I spoke with a service person and was told that they wouldn't re-solder the connector and that the whole board needs to be replaced. Can anyone tell me what this board is called and about how much it would cost to replace this board. Also is it possible to have the connector re-soldered? Where can I purchase a new board if this is the only option?

Welcome to Apple Discussions!
This does happen sometimes, and I believe the leads can be resoldered. However, it does require a specialist and special equipment. The only one I know of for sure is Superior Reball:
http://www.superiorreball.com/
I don't know of anybody close to you but maybe someone else does. You would have to talk very clearly to them about just where the leads came out and what you would need to send to them. From your description, I'm not entirely sure where the leads came apart--it sounds like you may have pulled the connector off of the logic board, but I am not sure of this. If so, you would need to send in the logic board and the connector. You really don't want to have to replace the logic board because of this--that would be far more expensive than sending it off for repair.
One reference that might be helpful to you is an iBook repair manual:
http://www.powerbookmedic.com/xcart1/files/ibookg412.pdf
I think the cable you are talking about is shown on page 23.
Good luck!

How to use on/off switch with the cover on?

Ive only just got my IPAD so it may well be me but why is the on/off switch 'under' the cover. Surely, I dont have to take the cover off everytime I want to switch it on and off? Or should I not switch it on and off and just use the cover to put in 'standby' mode?

Unless you will not be using the iPad for a long time, you do not need to switch it OFF, just use the magic cover to put it to sleep (standby).
BTW, the ON/OFF switch is at the top, not the Home button at front.
Message was edited by: ckuan

IPhone 4 has sticky on / off switch

My iPhone 4 has developed very stick on/off
switch. Any remedies would be much appreciated

this usually means the WiFi radio has malfunctioned. Bring your phone into Apple for evaluation.

6310i broken ON/OFF switch

Similar Messages

Maybe you are looking for