6310i - Error 0x1302 (err SMSInvalid Address)

The 6310i that I've had for years started to give problems recently so I managed to get my hands on another one - a used one, in good condition.
I've been trying to transfer SMS text messages from the old one to the new one via a bluetooth connection on my laptop and using Nokia PC Suite 4.88 (loaded from the CD that came with the original phone).
My problem is that when I try to transfer the SMS messages from the laptop to the new phone, using Nokia Content Copier, I get the following error message:
Error 0x1302 (err SMSInvalid Address)
Can anyone help, please?

Similar Messages

ERROR: transport error 202: bind failed: Address already in use

Hey guys,
I created 2 WL 10.3 Domains. I can start the admin server in domain but when I start the second admin server i get the following error:
starting weblogic with Java version:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Starting WLS with line:
C:\bea\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -XX:Com
pileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -XX:MaxPermSize=160m
-Xverify:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:
javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.
sbconsole... -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\serv
er -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=tru
e -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true
-Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classp
ath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch
cie670\profiles\default\sysextmanifest_classpath;C:\bea\patch_alsb1031\profile
s\default\sysext_manifest_classpath -Dweblogic.Name=TestAdmin2 -Djava.security.p
olicy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../.
./../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_E
RROR_TRANSPORT_INIT(197)
Stopping PointBase server...
I changed the port address of both admins but I dont' think that's the issue. Can someone tell me whats going on.
Thanks

Hi
Iam getting the Same Error , Can you provide me some information on what changes did you made to the setDomainEnv.cmd file to make this work
thanks in advance

What does this error mean? Error: Access violation at address 0053DD46

I am trying to run diff reports using batch scripts, and its very puzzling that some of the diff report scripts within the batch script are running and some are not, there is no consistency to what is getting errored out.
I then tried running them manually in foreground on the client and I get the same issue. Has anyone encountered this issue? What do I make of it?,
4/24/2013 1:29:30 PM - *** MDMConnect starting ***
4/24/2013 1:29:30 PM - Logged in successfully.
4/24/2013 1:29:30 PM - Started export job for PLN_FLD_ACCT_DIFF
4/24/2013 1:29:34 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024" while running Export
4/24/2013 1:29:34 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024."
4/24/2013 1:29:34 PM - *** MDMConnect stopping ***
Thank you
Tanuja Donavalli

This is issue is coherent in DRM version 11.1.1.2
Whenever a property is deleted, the references to that property would still exists/stored in tables. The next version of DRM is made to address this issue, where in it takes care of removing all references whenever we delete the property.
Cause: Properties was deleted from DRM client but the value was still stored in the compare table for Difference export and causing export to fail.
Solution: Need to recreate the deleted properties and remove the properties in the exports and delete the properties.
Going Forward: Instead of deleting the properties we need to remove the property from the export and hide the property.
Hope this helps.

When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!

when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!
This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

HyperNova Software,
Thank you so much. Because I am very computer illiterate, could you help me on how to get started? I don't have the slightest on where to get started, the steps to follow, etc.
Can't thank you enough for your help!

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

Error starting HTTP-Server: Address in use: JVM_Bind

I installed J2ee version of Oracle9iAS R2 for windows. When I start my application server, I always get the error "Error starting HTTP-Server: Address in use: JVM_Bind". In the previous version, if I met this message, I can change the port number in "http-web-site.xml", but now, no matter what port number I changed, I always get this error message.
Could anybody please help me with this issue?
Can Oracle provides a tool that can automatically free the port?
Thanks, Jessie

If you are getting this error while starting the Oracle9iAS by using the NT services or using command line (dcmctl) then there is a port conflict for the HTTP Server. You can go the EM Website and select HTTP Server ->Server properties and select the port# for the HTTP Server.
OC4J is configured to listen for AJP requests only and the ports are dynamically assigned. The port ranges can be specified : OC4J Instance -> Server Properties
regards
Debu Panda
Oracle

PXI RT 8.6 crash with error lvrt.dll load address 0x1924000

I have an application developed with LabView RT 8.6 that run 24h/day and randomly crash evry 3-10 day with this error:
LVRT.DLL load address 0x1924000. Attached I put log file available after restarting PXI.
I dont found any information on this error, and it's very hard to found the soluction... any idea?
Attachments:
lvrt_err_log.txt ‏66 KB

Application was developed with LV 8.6, actually I have installed a LV 8.6.1 in my lap top where I develope the application. I attach some print screen of configuration of PXI.
Application running on PXI consist of several never-ending loop, one of this is a time-critical loop where I from CAN, DAQ, and I send data via CAN. There is other Hardware-timed loop that comunicate via TCP/IP with PLC and with host computer (but application on host is not developed with LV, use a client socket to comunicate with PXI for reading data).
Error Log show alwayis the same error, and for my opionon, there is no relation for when the event occur, can be in any moment.
Application in pxi has some VI that are published as web service for diagnostic only, but there is no any interaction with user, (no keyboard and no mouse), it's a silent application, that read some encoder, calculate speed and aceleration, generate some output and send all data acquired via tcp/ip... 24 h/day.
Strange is that error position is always at 0x1924000, in all the error log!
Unfortunatly system is used all the day, and it's very far from office, so debug can be done only at specific day, when production is off... and internet is unavailable...
Enabling the debug mode, It's possible to have more information about the problem without changing the performance of the system?
Thank's for you help!
Nicola
Attachments:
img1.JPG ‏36 KB
img2.JPG ‏28 KB
img3.JPG ‏29 KB

HT5312 I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use

HT202667 Hi, I created my Apple ID using my iPhone but noticed I made a grammatical error in the email address.

Hi, I created my Apple ID using my iPhone but noticed I made a grammatical error in the email address. Using my PC, I managed to edit my email address however this change is not reflected on my iPhone. What do I need to do to see the change there? Thanks.

Hi mari285,
To show the reflected name, make sure to sign out of your current Apple ID and then sign in with the new one. You can do that in Settings > iTunes & App Stores and tap the Apple ID name and a prompt will come up with multiple option and one of them is Sign Out. Then tap it again to sign in with the correct spelling to get you going.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/en-us/HT201248
Take it easy,
-Norm G.

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

Error starting HTTP-Server: Address already in use: JVM_Bind

Hello,
I installed IAS 10.1.2.0.2. then I tried to start an application and get the following:
D:\Oracle_Home_IAS\j2ee\home>java -jar oc4j.jar
07/01/08 10:04:00 Error starting HTTP-Server: Address already in use: JVM_Bind
07/01/08 10:04:01 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initialized
07/01/08 10:04:01 !!! No valid java compiler found !!!
07/01/08 10:04:01 javac.exe not found under D:\MDK\jre\1.4.2, please use a valid
jdk or specify the location of your java compiler in server.xml using the <java
-compiler .../> tag

If I had to guess, you are starting HTTP Server on the same port as some other service.
BTW, Oracle Express is not a supported platform for Mobile Server.

Error starting ORMI Server: address already in use

- Linux RedHat 3 ES installed
- Forms&Reports 904 installed
EM:
BI_Forms repeatly tries to start, but fials:
"Error starting ORMI Server: address already in use"

You may have another OC4J running on your computer.
You should change the port number in the file config/rmi.xml.

Error establishing socket. Address already in use

Running CFMX 6.1 on Win2k3, I just recently started getting
these errors from connections to one of our SQLServer database
servers (2000, enterprise):
quote:
Error Executing Database Query.[Macromedia][SQLServer JDBC
Driver]Error establishing socket. Address already in use: connect
Any ideas what might cause this?

ok. well, if you think that was useless, you might as well
not read on... this isnt a coldfusion error. it only appears that
way because you are using cfml. this is a most probably an SQL
issue. i say most probably, because there are many reasons this
could be happening. try doing things in these steps as they are in
degrees of harshness.
1. check the server event log, see if you have an entry like
this
'You are running a version of Microsoft SQL Server 2000 or
Microsoft SQL Server 2000 Desktop Engine (also called MSDE) that
has known security vulnerabilities when used in conjunction with
the Microsoft Windows Server 2003 family. To reduce your computer's
vulnerability to certain virus attacks, the TCP/IP and UDP network
ports of Microsoft SQL Server 2000, MSDE, or both have been
disabled. To enable these ports, you must install a patch, or the
most recent service pack for Microsoft SQL Server 2000 or MSDE from
[L=http://www.microsoft.com/sql/downloads/default.asp]http://www.microsoft.com/sql/downlo ads/default.asp[/L]
[L=http://www.microsoft.com/sql/downloads/default.asp'</[/L]]http://www.microsoft.com/sql/downloads/default.asp'</[/L][/L]
install sp4
[L=http://www.microsoft.com/sql/downloads/2000/sp4.mspx]http://www.microsoft.com/sql/down loads/2000/sp4.mspx[/L]
2. change your database server name to its IP (if that doesnt
work, you might as well change it back)
3. make sure you are authenticating with an SQL account.
windows integrated authentication does not work well ... in your
SQL enterprise manager, set it to mixed authentication in the
security tab, select SQL server and windows authentication. the
microsoft driver seems to not handle the windows authentication
properly. i wouldnt use the the SA account, create another one just
for this purpose.
4. under the general tab in your enterprise manager click
network configuration. enable TCP/IP which is not enabled by
default
5. Install SQL Server 2000 sp3 or sp4
and here are some other useless articles you might want to
read...
Know bug in SQL Server preventing it from listening on port
1433
[L=http://support.microsoft.com/default.aspx?scid=kb;en-us;306865]http://support.microsoft .com/default.aspx?scid=kb;en-us;306865[/L]
[L=http://support.microsoft.com/default.aspx?scid=kb;en-us;329329]http://support.microsoft .com/default.aspx?scid=kb;en-us;329329[/L]
info on clustered SQL servers
[L=http://support.microsoft.com/default.aspx?scid=kb;en-us;815431]http://support.microsoft .com/default.aspx?scid=kb;en-us;815431[/L]

Transport error 202 bind failed address already in use

how to rectify -- transport error 202 bind failed address already in use-- while running CA server
i have created new production and pub server, first i runned production server after that while running CA server i got that error. if i run CA server independently its running

It seems like a port conflict issue. You should check rmi and other ports in the configuration file for the component /atg/dynamo/Configuration in the localconfig of your production and publishing servers directories under <ATG>\home\servers. Also, your app server should be configured to run two separate instances for production and publishing server as per the http ports specified in /atg/dynamo/Configuration.

Palm Desktop software - Fails to open with msg "Error: Failed to open Address Book database"

In July 2009 I dropped my trusty Visor on a tile floor and it stopped working. So, in the meantime I have been using only the Palm Desktop software.
Just yesterday, when I attempted to launch the Palm Desktop software, it failed with the message “Error: Failed to open Address Book database”. I think this error was caused by a very ungraceful shut-down of my Win XP system yesterday.
I really do need to use the Palm Desktop software for my address list, calendar, and memo. The problem is that the error with the Address Book database seems to be preventing the Palm Desktop software from initializing.
I am using Palm Desktop 4.0.1 on Windows XP SP3. I do NOT have an export file of the Palm address book or other databases. However, I do have five levels of backup history on my external Maxgor backup drive.
Specifically, on my current c drive I have files in the directory:
C:\Program Files\Handspring\WR\address
            address.bak                  5/16/2009   (from last sync before I broke Visor)
            address.dat                   5/24/2011
            Personal.ABA   11/6/2008
            Unfiled.ABA    3/28/2008
On my most recent backup of my system, there are the following files:
                        address.bak                 5/16/2009   (from last sync before I broke Visor)
                        address.dat                  5/12/2011
                        Personal.ABA   11/6/2008
                        Unfiled.ABA      3/28/2008
I have not listed the four older backup versions.
I haven’t tried any corrective measures yet (I don’t want to make matters worse) and am hoping that someone can guide me along the right path.
Is it possible for me to just rename the “current” address.dat file to something like address.SAV and then copy the Address.dat file file with date of 5/12/2011 into the current directory. Will the software then just use the older version of the data, or must I do something else.
I am grateful for any assistance. Thank you very much.
Post relates to: Visor Deluxe
Post relates to: Visor Deluxe

Thanks for the speedy response. However, I read the article for which you provided the link, and I hve also read many other articles that I found via search, but I don't think these will help me. All of these articles seem to assume that (1) you have a handheld to which you can sync and thereby rebuild the database on the PC, or (2) you have a backup that you created via the Palm Desktop export function. Unfortunately, I have neither and so I don't think any of these solutions will work for me.
I did read with great interest an article that stated that recent versions of Palm Desktop have a built-in function that will repair a corrupted Datebook database. Will this also fix a corrupted Address Book database which is my problem?
So, I downloaded and attempted to install the latest version of Palm Desktop. I was careful to read the instructions that stated NOT to uninstall my current version of Palm Desktop, but to just install the latest version on top of my current Palm Desktop. However, when I attempted to do the installation, the installer software said it could not install on top of my current software and that I should first uninstall my current software.
I have some questions now:
(1) If I uninstall my current version of Palm Desktop, will this destroy my Address Book, Datebook, and Memo databases ( I don't care about the ToDo database)? If so, what can I do to preserve those databases?
(2) Is there really a function built in the recent versions of Palm Desktop that will fix a corrupted database? Is this an "automatic" function that will detect and fix a broken database or is this something I will have to invoke?
Thanks for your help.
Gdad

6310i - Error 0x1302 (err SMSInvalid Address)

Similar Messages

Maybe you are looking for