6368 (rev2.1) + 1.3ghz Celeron Compatible?

Is it possible to run the 6368 with a 1.3Ghz Celeron (type SL6JT)? Ive tried to boot it - but the system doesn't POST. The board seems ok as it boots with a VIA C3 866Mhz.
I can only find the CPU list for rev 5 of the board on the MSI website - what CPU's are compatable with this rev if this Celeron isnt?
Thanks,
Ben

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=21
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=21&kind=1
no as it says 5 only way i read that

Similar Messages

Intel Celeron compatible with dreamweaver CC ?

Hello,
I want to know if a computer with a intel celeron processor is compatible with dreamweaver cc?
Thanks

The system requirements list Intel Pentium 4 or AMD Athlon 64 as the minimum.
However, you could always download the 30-day free trial to test it for yourself.

Soundblaster Audigy 2 ZS Platinum and Acid Pr

Hello. I am using an Emachines with 3.3GHz Celeron and .5G RAM and Windows XP SP2. I am trying to record with Acid Pro 6 at 24bit and 44.khz (seems to work with the default audio device - Microsoft Sound Mapper or something like that) but I do not get the I/O options that I have with?the Audigy. I went to Options - Preferences then clicked on the Audio device tab and I tried to switch the audio device?to Soundblaster Audigy 2 ZS and I get a message saying that this device does not support that bitrate or sample rate. The only time it will let me switch to Soundblaster Audigy is if I first change to 24bit and 96khz. The problem with this rate is that?it consumes hard dri've space rapidly. Can the Audigy 2 ZS support a 24/44. rate? I am still trying all kinds of troubleshooting. I'm also researching on the Acid Pro forum for info. Any feedback will be appreciated. Thank you. Jeremiah

jmw wrote:
I went to Options - Preferences then clicked on the Audio device tab . . .
Edit:? I went to Options and Preferences in Acid Pro 6 to try changing the audio device type. Could I get a little reassurance that Audigy 2Z Platinum (Not the Movie Editor) supports 24/44. or 24/48?jmw

Dead P4N SLI...4 Days Old

Hi
My new mobo died after 4 days out of the box and I could use some advice as I'm going to have to figure out what to return to the online company that I purchased it from. Could it be the processor?
I put together a:
MSI P4N SLI mobo with a 3ghz Celeron and 512mb chunk of Geil 667 RAM with a 480 watt Mutant Mods PSU. Yes, the RAM is in the correct slot.
After 4 days (24 hours a day) of operating fine, yesterday I was talking on Skype and my machine went cold, lights out.
Tried rebooting, can hear the CPU crunching, fans and lights working, DVD drive blinking, hard drives are humming but monitor remains in sleep mode and there are no POST beeps to be heard. Tried resetting the CMOS, nada...no luck. Tried booting a few hours later and the monitor came on and I got into the BIOS so I let it sit like that. After a few minutes it died again. Does this mean anything to anyone?
Would a dead CPU prevent the BIOS from being accessed or is the BIOS able to operate without a CPU?
Would a dead mobo be able to boot again but only for a brief time?
Argh!!!!

hcoshawn, I think you just solved the problem.....I'll wait it out and see what happens
On the board, just about the top PCIe slot, there is a 4 pin molex connector to add more power to the board, in addition to the 24 pin main and the square 4 pin ATX. When I originally built up the system, I had this hooked up and then removed it thinking that I'd only need it there if I have a vid card in that slot and it worked fine...for 4 days. Anyway, I tried putting if back just now after reading your post and although there are no hard drives hooked to the board right now, with all the power connectors stuck to the board, she booted up and gave me a single POST beep, which for this board is a positive POST.
I'm just going to let it run for awhile and see if it shuts down again, but she is purring like a kitten now..
Any ideas why it would work for 4 days without this connector and then just stop working? I think it could be that I installed the nVidia drivers for the board on that 4th day and that initiated a call for more power from the board....not sure.
I am sofa can we todd did! :D

I need bios compatible with celeron E3200/E3300 for P35 neo-f

I need the bios compatible with Celeron E3200 for P35 neo-f, my motherboard is running the latest version of bios

There are 2 P35 Neo MB's. One w/BIOS 2xx and the other w/BIOS 1xx. G33 Neo also has the same BIOS & CPU support as P35 Neo w/BIOS 1xx. From what I see the one w/BIOS 2xx supports it but the one w/BIOS 1xx does not. Best would be to contact MSI with your question and specify which BIOS your MB has. >> G33 Neo <<
This list also shows the difference: >> P35 Neo <<
>> Contact MSI <<

Change Pocessor, what's compatible. Have: HP Presario V6000 (V6103EA) intel celeron 420 @1,60GHz

HP Presario V6000 Notebook (V6103EA)
Win XP 32
Need to upgrade:
Now: Intel Celeron M 420 @1,60GHz
Want: 2.5GHz or Higher
Compatible Processor, Sockets?
Now: Fujitsu MHV2080BH PL 64,1Gb
Want: 250 Gb or Higher
Compatible harddriver?

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c01035886.pdf
Supported processors are listed in chapter 1, page 1 - 2.
Supported hard drives go to 200 GB that HP offered.
So, I see no reason why you can't install a 250 - 320 GB hard drive in your notebook.
SATA I or II, but it will only run at the SATA I transfer speed.
5,400 RPM for longer battery time between charges or 7,200 RPM for better performance.
Paul

6368 With 1.2Ghz Celeron wont Boot

I have tried several processors in this Board It is a version 5 PCB.
A 800Mhz P-III will boot and run . A 1Ghz p-III wont start a Celeron 1.2Ghz 100mhz bus 1.5V only beeps.
Any Help or thoughts

I have checked the compatability, manual, etc.
This is what MSI's site says...
Celeron (Tualatin) 1AG 100 10 OK (PCB Ver.5 only)
Celeron (Tualatin) 1.1AG 100 11 OK (PCB Ver.5 only)
Celeron (Tualatin) 1.2G 100 12 OK (PCB Ver.5 only) Celeron (Tualatin) 1.3G 100 13 OK (PCB Ver.5 only)
Celeron (Tualatin) 1.4G 100 14 N/A
Any other thoughts

CPU Upgrade on a Satellite M40 : from Celeron M to Pentium M (?)

Hi everyone,
I have a simple question. Do you think one can change the CPU in a M40-307 (the one with the ATI chipset) from a Celeron M to a Pentium M?
I currently have a M370 Celeron Dothan (400mhz fsb), so I assume that a dothan Pentium M (400mhz) would do?
Thank you!
Disclaimer: I know what I am doing in terms of opening the laptop, as a matter of fact the 1,5ghz celeron is currently pin-modded to 2ghz, the warranty has been over for 6 months already, the rest of the computer has already been upgraded (HD, RAM) and the pentium M I have in mind (725 and 735) are available for about 15 euros.

Well, I found out that the M40 Satellite were equipped with different CPUs like;
Intel Pentium M (Dothan) Processor and Intel Celeron M.
Intel Dothan Processor (533MHz)
730 1.6GHz
740 1.73GHz
750 1.86GHz
760 2.0GHz
770 2.13GHz
Intel Celeron M Processor (400MHz)
350 1.3GHz
360 1.4GHz
370 1.5GHz.
So theoretically all these CPUs should be compatible. But as I said its theory.
Practically its always another story

MS-6368 graphics bug

I'm a newcomer on MSI product as well as this forum.
Recently, I purchase a MS-6368 MB with a Celeron 1.3G. I do admit it's a high value for money (CPU+MB costs me just about HKD$800 or USD$100 in Hong Kong). As I'm not a 3D gamer and not expect much in integrated graphics performance (apart from playing DVD/VCD occasionally), however, I found that there're a lots of undoubtful flaw in graphics.
Here's my bug reported against VT8601T based MS-6368 MB. It happened even I freshly installed the system by formatting the whole harddisk and of course no tweaking ever.
Also, may I know should I report the bug to VIA and how to do so?
1. text overlapping when page scrolling in IE 6.0
It casued the problem even in displaying simple HTML or text file.
http://home.netvigator.com/~whfu/blocky.gif
http://home.netvigator.com/~whfu/blocky2.gif
2. DVD playback quality is bad
It happened on both WinDVD 4.0 and PowerDVD XP 4.0 I believe it's a color dithering problem and the color is "blocky".
Sample screen shot from "Thirteen Days" DTS DVD.
http://home.netvigator.com/~whfu/dvd01.jpg
3. Video Accelerator not detected PowerDVD XP 4.0 /w latest build 1811
http://home.netvigator.com/~whfu/powerdvd.jpg
A. Hardware Config:
CPU Celeron 1.3GHz
MB MSI 6368 PCB ver. 5
North Bridge VT8601T (PLE133T)
South Bridge 686B
BIOS version 5.8
BIOS ID : 08/12/2002-601-686B-6A6LIM49C-00
256MB PC-100 SDRAM
IBM 20GB HD 7200rpm UDMA-66 (IBM-DPTA-372050)
CREATIVE CD-RW RW2410E
MATSHITA DVD-ROM SR-8585
onboard LAN RealTek 8100L
onboard AC-97 codec VT1612A
B. Software Config
Windows 2000 Professional SP3
DirectX 8.1
Windows Media Player 7.1
4in1 driver: 4.43v
Display Driver: KPLE_Win2KXP_3137 (latest)
AGP mode: Normal
Audio Driver: 3.20b
PowerDVD XP 4.0 /w latest build 1811
Screen Resolution: 800X600 32-bit color
PowerDVD XP 4.0 Build 1811
WinDVD 4.0

I have the exact same problem with the graphics on my MS-6368 and I've tried everything to stop it, I've tried BIOS settings and new drivers and played with the drivers and still nothing works, It better start working because I paid $170 CDN for it :O

Running Celeron 1.2Ghz CPU on a MSI 6163Pro v2.0

Hi,
I've been running the following system for three years now and am planning an upgrade of the CPU:
MSI 6163-Pro v2.0 (FSB at 133mhz and AGP divider at 1/4) 3.10 bios (latest)
Slot 1 PIII 550 CPU overclocked to 733mhz (133mhz FSB) - running rock solid all this time as it has a whopping big heatsink and two big fans on it
784mb of Kingmax low profile PC133 SDRAM
GeForce 2 MX 440 v/c
Creative Soundblaster Live DE SE s/c
assorted NIC's, and other cards, hdd's, drives, etc
I have picked up a generic OEM socket 370 -> slot 1 slocket and am considering putting the fastest socket 370 CPU that I can find into it (Celeron Tualatin 1.3Ghz CPU).
The 6163Pro should accept the slocket and the slocket will handle the 1.3 GHz CPU, but I have not been able to find any information as to whether the 6163Pro will accept the tualatin 1.3Ghz CPU on the slocket?
The CPU runs at a default of 100mhz FSB. If the mobo will run it at that speed, I plan to try overclocking it back up to 133mhz FSB through using a Pep66 Alpha cooler, again using the AGP divider of 1/4.
My question is, has anyone tried running a tualatin CPU in a slocket on the MSI 6163Pro v2 before? Will it work, or is there any reason why it cannot work? Do you think that the overclock will work?
Is there anything I need to be aware of (apart from the usual - voltage, heat, voiding warranty, etc)?
Regards
Anakha

I went into my BIOS and noted the following:
CPU Plug & Play III
Award Software v3.10
CPU speed: 733mhz
CPU multiplier: 5.5
CPU/PCI Frequency: 133 / 33mhz (On)
As the PCI frequency = the AGP frequency, the BIOS would appear to have a 1/4 divider. Is this an unsupported feature?
The upgradeware slocket that I mentioned in my previous post is significantly cheaper than the Powerleap one and from reading through several threads in the http://www.overclockers.com.au Intel forum, there are many happy users of it (upgradeware).
The upgradeware website lists the MSI 6163Pro v2.0 as being compatible with the slot-t slocket, so I will buy one and some 1.3/1.g Ghz tualatin celerons and let you know how it goes (will be travelling for a while, so it will probably take me 6 wks to get back to you about it).
Regards,
Anakha

Cannot update to 3.5 on older MacPro and 3.5 not compatible with 3.4.5

It appears that you cannot update Aperture to 3.5 on older Macs. Worse yet the new update is not compatible with the previous version.
The questions are ---
Is this a temproary issue or a permanent issue?
Can I regress back to version 3.4.5 to get my compatibility back ?
I have multiple computers I use to work on my photography.
I use a older Mac Pro Vintage late 2007 that cannot be updated beyond OS 10.7.5. This is currently my primary photo computer.
With 3ghz Quad cores and over a terabyte of drive space no need to update yet except for not being able to load the latest OS.
I also use a MacBookPro Vintage Late 2011 and it was just updated to Mavericks. I use this to edit my photos on the go.
I will consider updating to the latest Mac Pro when it becomes available but what to do until then and a warning to others.

Actually, I had this same problem - accidentally upgraded my library on my Mac Air to 3.5, but am not running Aperture 3.5 on any of my other, older Macs. I *was* able to downgrade the library back to 3.4.5. BAsically, I had to open the library on a computer running Aperture 3.4.5 in library repair mode (holding down command and option when opening). In the ensuing dialog I had to choose to rebuild the library. I first tried just repairing, and it seemed to work, but next time I opened Aperture I got the "library can't be opened iwth an older version of Aperture" message. Rebuilding it seems to have done the trick.
A more detailed explanation (though not written for this particular scenario) is here:
http://www.apertureexpert.com/faq/common-aperture-questions-issues-and-rep/how-d o-i-repair-or-rebuild-my-aperture-library-or-permission.html
Having restored the library to 3.4.5 format, I downgraded Aperture on my Air to 3.4.5 as well and it's been smooth sailing. Just make sure you have Mavericks set up to *NOT* automatically update your apps, or you'll end up in the same situtation all over again when it silently upgrades Aperture to 3.5 again.
Good luck!

Release Date for Leopard-Compatible ProTools? Help Please!

Hey,
I think this was the best forum to post this in. :$
I have a Yahama Motif 7 Keyboard ( USB & MIDI Outputs ) connected via MIDI to a Digidesign Driver, which is then connected to my computer via FireWire cable. Logic Studio cannot recognize my Digi002 Driver, and I know this is because I lack ProTools AudioCore Recognition ( or something like that :P ) software.
Does anyone know the expected release date of the version of ProTools that will be compatible with Leopard? Would the hassle to reverting my computer back to Tiger be less than waiting for the new ProTools to come out?
Thanks for any help you can give me.

I have just upgraded in a quantum leap from a Quicksilver Mac to a Quad Core 3ghz Mac Pro, and swapped out my MBox 2 for a Factory 003. Despite promises to the contrary, the Mac Pro came without Tiger install disks, which I knew I would need. Just Leopard disks and the beast pre-installed. Looks great but of course my Pro Tools 7.3 install failed. I tried the tips to install that were on the digidesign and Mac forums, and still no joy. Apple Care... well, cared and I am now waiting for OEM Tiger 10.4.8 to arrive so I can do a clean erase and install. Hopefully this will then leave me able to plug in the 003 and start having a great deal of fun Apple Care has sworn blind and on pain of spam that the install will work, and that the firmware has not changed since they were shipping the Mac Pro with both Tiger and Leopard install disks. Here's hoping, 'cos I hear not a whisper about Leopard-compatible Pro Tools...

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels)

I have a macbook pro 13" with intel i5 2.3GHz processor. I want to know if my mac will be able to handle Battlefield 3 smoothly. I just want to play without any lag (I'll use Windows vista on parallels). I don't exactly know how turbo boost 2.0 works either. Or if it'll help.

Recommended system requirements for Battlefield 3
OS: Windows 7 64-bit
Processor: Quad-core Intel or AMD CPU
RAM: 4GB
Graphics card: DirectX 11 Nvidia or AMD ATI card, GeForce GTX 460, Radeon Radeon HD 6850
Graphics card memory: 1 GB
Hard drive: 15 GB for disc version or 10 GB for digital version
Minimum requirements for Battlefield 3
OS: Windows Vista or Windows 7
Processor: Core 2 Duo @ 2.0GHz
RAM: 2GB
Graphic card: DirectX 10 or 11 compatible Nvidia or AMD ATI card.
Graphics card memory: 512 MB
Hard drive: 15 GB for disc version or 10 GB for digital version
You only have 384 MB of GPU Memory....
Processor class
Intel Core i5
Processor model
Sandy Bridge
Processor speed
2300 MHz
Number of Cores
2
Cache size
3 MB
Graphics
Graphics Type
Integrated
Integrated Graphics Chipset
Intel
Integrated Graphics Chipset Model Number
3000
Graphics Memory
384 MB
Memory
Installed memory
4 GB
Maximum memory
8 GB
Memory technology
DDR3
Memory Speed
1333 MHz
I don't think your mac can handle it... but like the dude above you said... trial and error is usually the best way to find out. Hope this helps!

Which flash version is compatible/where do I get it?

Which flash version is compatible with my laptop? Where can I get it?
I have recently restored to factory settings and am not able to play "Gemcraft-Chasing Shadows" although I was ok. It gives the message that it may have stopped working etc.
Please help. That game kept me sane.
System is:
*Vista
*32bit OS
*celeron 900 processor (2.19 ghz)
*1 g RAM
Thanks folks.

You should always use the latest Flash Player.
The following troubleshooting guide might help -- in particular, check out the stuff about disabling Hardware Acceleration:
Video playback issues
If that works, and you haven't downloaded the latest drivers for your graphics hardware, I'd do that and then enable hardware acceleration again.

Computer compatible with sounblaster audigy 2 ZS Plat

I currently have the 6bit version of soundblaster li've on a dell dimension 2400 PC and was curious if i would be able to install soundblaster audigy 2 ZS Plat Pro instead. Is my computer compatible with this because im having difficulty finding anything out from Dell

ACUBaller83,
If your system fits to these specifications then it should work, just make sure to completely uninstall the Li've! before installing this (and put the Audigy 2 ZS into a different PCI slot).
<SPAN class=textbluebold>Minimum System Requirements
<TABLE cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Processor: Genuine Intel? Pentium? II, Celeron 350MHz, AMD-K6? 450MHz or faster </TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Intel?, AMD or 00% compatible motherboard processor chipset</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>System RAM: 64MB for Windows? 98SE and ME, 28MB for Windows 2000 SP2 and XP</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>600MB of free hard disk space</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Windows? 98SE, 2000 SP2, ME, or XP</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Headphones or amplified speakers (available separately)</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Available PCI 2. or higher compliant slot</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>Available adjacent slot for Joystick/MIDI bracket (optional)</TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=0 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com/images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com/images/spacer___6.gif" width=5 border=0></TD>
<TD class=text vAlign=top>CD-ROM or DVD-ROM dri've required for software installation</TD></TR></TBODY></TABLE>
Jeremy

6368 (rev2.1) + 1.3ghz Celeron Compatible?

Similar Messages

Maybe you are looking for